Just installed 10g: Main form cannot find subforms or menus

I just added 10g FOrms Builder to my PC. I was running 9i and it still exists on the machine.
Problem: My main form, when run locally from Forms Builder cannot find any of its menus or subforms unless the FULL PATHs are defined in the properties or CALL_FORMs.
This was not a problem when running from 9i FOrms Builder.
I am assuming its a parameter somewhere in the FORMSWEB.CFG file which sets the default path to whatever path the main form uses.
Can anyone steer me in the right direction?
THANKS!

Hi,
Well, I assume that if 9i was installed, you also had FORMS90_PATH set in the registry.
Perhaps what is happening is Forms is running your main form, and then when you are calling other forms, it is using the 9i versions, and then failing because they are not 10g versions.
For example:
d:\app\9i\form1.fmx
d:\app\10g\form1.fmx
When trying to call form1.fmx, Forms follows the FORMS90_PATH first and uses the form in d:\app\9i\. Change your FORMS90_PATH and see what happens.
This is just a theory, I am new to 9i and 10g myself.
Cheers

Similar Messages

Hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

Ah!
Factuur Bright x
part of errors:
Process:         Factuur Bright X [1476]
Path:            /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier:      ???
Version:         ??? (2.0.0b20)
Code Type:       X86 (Native)
Parent Process: launchd [184]
User ID:         501
Date/Time:       2013-07-10 22:35:39.180 +0200
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          2118 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

I just installed Aperture3 and I cannot access anything. It says I need to set the file permissionssss

I just installed Aperture 3 and cannot access anything. It says I need to set file permissions.

some problems corrected with software updates

Just bought an ipad2 but cannot find the face time application after activating the ipad2

Just bought an ipad2 but cannot find the face time application after activating the ipad2

FaceTime is not available in the UAE so it is not on your iPad. It is restricted there.

Please! WHY? Why does the main class cannot find symbol symbol : constructor Car(double) location: class Car?

Why does the main class cannot find symbol symbol : constructor Car(double) location:
class Car .. ??
class Car
{ //variable declaration
double milesStart; double milesEnd; double gallons;
//constructors
public Car(double start, double end, double gall)
{ milesStart = start; milesEnd = end; gallons = gall; }
void fillUp(double milesE, double gall)
{ milesEnd = milesE; gallons = gall; }
//methods
double calculateMPG()
{ return (milesEnd - milesStart)/gallons; }
boolean gashog() { if(calculateMPG()<15) { return true; } else { return false; } }
boolean economycar() { if(calculateMPG()>30) { return true; } else { return false; } } }
import java.util.*; class MilesPerGallon
{ public static void main(String[] args)
     double milesS, milesE, gallonsU;
     Scanner scan = new Scanner(System.in);
     System.out.println(\"New car odometer reading: 00000\");
      Car car = new Car(milesS); car.fillUp(milesE, gallonsU);
     System.out.println(\"New Miles: \" + milesE); milesE = scan.nextDouble();
     System.out.println(\"Gallons used: \" + gallonsU);
     gallonsU = scan.nextDouble();
     System.out.println( \"MPG: \" + car.calculateMPG() );
     if(car.gashog()==true) { System.out.println(\"Gas Hog!\");
      if(car.economycar()==true) { System.out.println(\"Economy Car!\");
     } System.out.println(\"\");
     milesS = milesS + milesE;
     System.out.println(\"Enter new miles\");
      milesE = scan.nextDouble();
     System.out.println(\"Enter gallons used: \");
      gallonsU = scan.nextDouble();
     car.fillUp(milesE, gallonsU);
     System.out.println(\"Initial miles: \" + milesS);
     System.out.println(\"New Miles: \" + milesE);
     System.out.println(\"Gallons used: \" + gallonsU);
     System.out.println( \"MPG: \" + car.calculateMPG() );
     System.out.println(\"\"); } }

Why does the main class cannot find symbol symbol : constructor Car(double) location:
class Car .. ??
Please tell us which line of code you posted shows 'Car (double)'.
The only constructor that I see is this one:
Car(double start, double end, double gall)

I just downloaded a ringtone and cannot find it.

I just downloaded a ringtone and cannot find it. Error code says to go to "Music Inbox to Download". So where in the heck is that?

I just spent forever with this problem with verizon. did you try downloading from Verizon Tones? If you did and didn't get it resolved try this...
Go into verizon tones and press and hold the soft key (the recent apps key-used to be the menu options key on old phones) to the left of the home button. when you press and hold it, the menu options come up instead of the recent apps. Then press "downloads". I found my ringtone there under "pending"

I have a hp dv1340us i just install win7 but i cant find the audio Altec Lansing

i have a hp dv1340us i just install win7 but i cant find the audio Altec Lansing

Hi:
You can see if the Vista driver works.
Manually install it if you have to.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
There is also this one...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...

My MBP has Mountain Lion installed. The iPhoto version is 8.1.2. Cannot install iPhoto 9.4 without installing 9.0, but cannot find 9.0. Solution, please.

My MBP has Mountain Lion installed. The iPhoto version is 8.1.2. Cannot install iPhoto 9.4 without installing 9.0, but cannot find 9.0. Solution, please.

If you're running Mac OS X 10.8.x ou can purchase iPhoto version 9.x from the App Store. If you purchase iPhoto at the App Store you will automatically get the most up-to-date version and you won't need to install the 9.4 update.
-Doug

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

We have just installed Lion and now cannot connect to MyExpat

we have just installed OS X Lion, v10.7.2 and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?

yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b

Error when trying to install the iSCSI target - Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'

Hi,
I'm just attempting to setup an iSCSI target on a freshly installed Windows 2012r2 box, but I get the following error when attempting to Create and iSCSI virtual disk via the wizard after a successful
installation of the iSCSI target role.
The full error is:
Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1' in directory 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-GB\', or in any parent culture.
I tried to uninstall, then reinstall the role but no go.
The Server Locale and UI was all updated to en-GB but this folder does not appear to exist in this location. Rather, the folder I can see is:
'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-US\'
I'm going to attempt to copy the 'en-US' folder to 'en-GB' to see what happens, but I would like to know why this has occurred in the first place? Other roles have installed (such as AD DS AD CS and
IIS) on other machines with no issue.
Many thanks
Chris
Chris

Hi Chris,
The error "Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'" occured, because the file 'ImportExportIscsiTargetConfiguration.psd1' can't be loaded under the folder en-GB with current culture.
I recommend you can copy this .psd1 file under 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget'. Essentially if PowerShell can’t find the specified data file for the current culture it will “fallback” to the top-level data
file in this case.
For more detailed information, please refer to this article:
Windows PowerShell 2.0 String Localization
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT4623 Just installed io7, now I cannot get Netflix to be full screen. Also ipad start up etc seems a lot slower.

Just installed ios7 on ipad 3. Now cannot get netflix to be full screen. Also start up of ipad is suddenly slow.

I don't use netflix yet on mine but the slow startup I might be able to help. I just restarted mine and in maybe 5 seconds is restarted.
If you have a lot of programs running in the background that may be causing the slow start or shutdown. To close those running programs, 4 finger upto get to the running programs and to close them, tap one and hold for a second and flip upwards,, it will go off the top of the screen, closing it. Do this with all that you want closed, there will only be the main screen you can't close that will be left.
I also shut off location services, Bluetooth and under safari there a use data option which for some reason turned on but I could have clicked yes somewhere and those got turned on, but I turned them off since I don't need them on.
Then try a restart.

Cannot install Office 2013 - Seup cannot find or validate an installation file

I downloaded the trial version of Office 2013 to evaluate it, but was unable to install it because I kept getting the following error...
Setup cannot find or validate an installation file. Please try reinstalling office from your installation source or if you installed from a downloaded package, please re-download and reinstall. If you continue to haVe problems
contact Microsoft or your system administrator.
I tried re-downloading the program - again I was met with the same problem. I tried running the setup file as administrator - problem remained. I tried copying the program to the hard drive and running it from there as the administrator - problem
remained. I downloaded Microsoft fixit tool for problem installations and ran that - that was no use either. The error message just kept coming back again.
I am assuming the setup file is corrupted in some way but seem unable to get an alternative setup file that will actually INSTALL. Or is there something so blatantly obvious going on that I'm missing it?
Help please!

I deployed Office 2k13 to client machine via SCCM 2012 R2. It did that flawlessly but I got the same error after trying to uninstall Office 2k13.
setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Uninstall.xml file:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
I can uninstall Office 2k13 manually by running setup.exe and following wizard but it is not automatic process so it sucks.
I've responded in your other thread:
https://social.technet.microsoft.com/Forums/en-US/fd735611-95bf-46f6-8add-2229a52e3e93/i-can-not-uninstall-office-2013-from-command-line?forum=officeitpro
Hi, your command-line is not valid - you are using a "relative" path for the <config.xml> and that is not supported..
http://technet.microsoft.com/en-us/library/cc178956(v=office.15).aspx#BKMK_config
Note: You must use a fully qualified path. Setup does not recognize relative paths with /config.
Instead, I suggest that you copy your "Uninstall.xml" file to the same folder where setup.exe exists, then, adjust your command-line like this:
setup /uninstall ProPlus /config Uninstall.xml
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

Just installed 10g: Main form cannot find subforms or menus

Similar Messages

Maybe you are looking for