Just installed java3d but the demo programs will not show any graphics

Hi,
I just installed java 3D and when I run a demo program
like "HelloUniverse" a window pops up but it is blank. Nothing is
happening.I cant figure out what is going wrong.
Any help is appreciated,
Thanks.

you might want to seek help in the 3D forum....

Similar Messages

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • My Podcast Just Became Searchable But The Cover Art Is Not Showing

    Hi,
    My podcast just became searchable in the itunes store. I knew it took a few days but the cover art is not showing yet.
    Is this a process that just takes more time as well? When I subscribe to it the artwork shows up but it's not showing up in the store..
    thoughts?

    Your feed is at http://feeds.feedburner.com/MobileMixedPodcast
    The image is correctly referenced in the feed: it can take several days before the image appears in the Store, so it's just a question of waiting.

  • I have a 5 month old Magic Mouse and I want to replace the batteries for the first time but the battery door will not release any suggestions?

    The battery compartment door on my Magic Mouse appears to be jammed shut and will not open, the device is only 5 months old and this is the first time I have needed to open it to change the batteries. Are there any suggestions?

    It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
    Try turning over the mouse so the compartment panel faces you, optical sensor topmost.  Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
    Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

  • My website was made with iWeb, but the SiteLock logo will not show when I try to install it on my site.

    Has anyone found a way to fix this?

    Ok, I now have:
    <a href="#" onclick="window.open('https://www.sitelock.com/verify.php?site=www.elainegeringerpiano.com''SiteLock'' width=600,height=600,left=160,top=170');" ><img alt="website security" title="SiteLock" src="//shield.sitelock.com/shield/www.elainegeringerpiano.com"/></a>
    Now I have a blue rectangle on the page after hitting "apply" - no shield. Have I spaced things correctly?
    Roddy wrote:
    change this...
    src="//shield.sitelock.com/shield/www.elainegeringerpiano.com"
    to this...
    src="http://shield.sitelock.com/shield/www.elainegeringerpiano.com"

  • Very small program will not show any PDF!

    Here is my program. I must do something wrong, but I cannot see what.
    The JPanel remains gray. Any idea?. Thanks.
    public class PDFViewer extends JFrame
    public PDFViewer()
    try
    Container c = getContentPane();
    Document document = new Document();
    document.setUrl(new File("f.PDF").toURL());
    JPanel area = document.getPeer();
    area.setVisible(true);
    c.add(new JScrollPane(area));
    setSize(200, 250);
    catch (Exception ex) {ex.printStackTrace(); }
    public static void main(String[] args)
    PDFViewer v = new PDFViewer();
    v.setVisible(true);
    }

    Thank you for the answer. By testing your advice, I did the test on another pdf and it worked. In fact, I have a pb with the first pdf I used. I cannot view it with pdfgo library, but this pdf will show nicely with acrobat reader.
    So now, I have a different problem.
    Anyway, thank you.

  • My ipad 2 display lights up but will not show any graphics. I have rebooted it but no help.

    HELP!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
     Cheers, Tom

  • ATV2 - Will not show any video w/o reboot

    I have 2 Apple TV devices (both are 2nd generation).
    One of them is fine.  But the other one will not show a signal after about a day of no use. I have to unplug the power, then plug it back in to get a signal out of it.
    The other day, I watched the LED light as I was trying to turn it on. It just flashes when I press the power button on the remote, so it is indeed getting my remote commands. After I try to turn it on about 5-7 times, the LED stays lit. But the TV still says "no signal".  If I unplug it from the power, then plug it back in, only then it comes back up and seems to work ok.  But if we don't use it again for about a day, when we come back to it.. we get the same thing and it needs to be unplugged again and plugged back in (power).
    I tried to reset to factory settings, but that didn't help.
    This started happening after the 4.2 update (I think that was about 3 updates ago).
    Any ideas I can try?
    Thanks in advance.

    Hi
    As I see this I mostly suspect one of three reasons
    • iMovie Event's and or iMovie Project's folders have/has been moved/altered on DeskTop/Finder - DON'T - but try to move everything back exactly where it was
    • iMovie pref. file got corrupted (very easily done by e.g. Panic/Force halt's) - trash it when iMovie is NOT running
    • Material used in Movie Project is located on device not accessibly any longer. E.g. one used audio from Audio-CD then ejected the CD. iMovie (Project's) Don't do ANY copy of the used material - only point's to where it found it and if external hard disks, Audio-CDs etc are disconnected then the iMovie Project get's lost and it has no function to try to find it (at all).
    Yours thinking - bengt W

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address.

    I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address being used by another device.  Second wifi network was also created.  The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

    If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
    Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
    Wait a full minute
    Start the modem, and let it run by itself for 2-3 minutes
    Start the next device connected to the modem and let it run a full minute
    Keep starting devices one at a time about a minute apart until the entire network is back up
    Check the network

  • I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    You won’t be able to use it. Ask eBay for a refund.
    (120398)

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Maybe you are looking for

  • Why can't I search in the location bar anymore?

    I don't mind the changes made to Firefox too terribly but the one thing that's really throwing me off is that I can't search Google from the location bar anymore! Previously, when I wanted to know something stupid like how tall the Eiffel Tower is, I

  • Help needed in installing sql server 2014

    i am trying to install sql server 2014 ,but error keeps coming .Any websites from which i can download. Thank you

  • NSP ABAP 700 - which kernel patch to use?

    Hi, I have my NSP ABAP 700 from SDN installed on my home laptop. I'd like to patch the kernel, however I'm not sure which kernel patch I can use from the Markeplace. I have Windows XP with MAXDB on an intel architecture. Is it the one called "Windows

  • Calendar Backup Problem

    I'm having an issue with the calendars on my iPhone after a backup and restore following an upgrade to the iOS4 on a 3G handset. Back in April I did an update for the relevant OS version at the time and all was fine except for no apparent reason all

  • Publishing from iMovie '08

    Hello, I have worked with iMovie for mostly slideshows and it has kept me very happy. Most of the projects I had made were about 30min or less. This month, I had imported home videos from a Sony Handycam (which model not sure) successfully to iMovie