Just need Mavericks base installer to upgrade from Mountain Lion. Company hasn't approved Yosemite (3 weeks).

A month ago, I could have just downloaded the upgrade for Mt. Lion to Mavericks. Now, I can't find it.  All there seems to be is 10.9. to 10.9.10 updates, no base Mavericks.  All other update requests, questions, and queries at the Apple Store and iTunes go right to Yosemite.  Even my Mac obnoxiously says I need to upgrade to Yosemite (like it did for Mavericks, I can't turn the upgrade notification off).  I need Mavericks.
My company won't allow upgrading to Yosemite for at least another month, if not longer.  I want to upgrade now to Mavericks in the interim, and I can't because I can't fine an installer.  I can't do Bit Torrent either, so can't go to any "free" sites.
Stu

I can't do Bit Torrent either, so can't go to any "free" sites.
You are lucky. Downloading from torrents often downloads malware and in this case would be illegal.

Similar Messages

  • Cannot upgrade from Mountain Lion 10.8.5 to Yosemite , reaches 1.34 GB then 'Error has occurred'

    Hi All
    Sorry not technically minded at all.
    Trying to upgrade my iMac which is running Software  OS X 10.8.5 (12F2518) to Yosemite, reaches 1.34 of 5.64 GB and states an error has occurred.
    I've attempted this on numerous occasions and always with the same outcome.
    many thanks in advance.
    Jon

    Try downloading it in the Safe Mode.
    Safe Mode - About
    Safe Mode - Yosemite

  • I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?

    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?  Just a patch/update or do I need to uninstall and install?

    antoniobesteban wrote:
    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
    Where are you seeing that information? Got a link?
    According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
    Plenty of people, including me, are currently running CC on Mavericks.

  • Mavericks upgrade from Mountain Lion deletes all user accounts

    This is a lesson for upgrading too early (and too eagerly).
    Today I tried the Mavericks upgrade from Mountain Lion on my 2007 Macbook Pro, after going through all the pre-installation/pre-upgrade checklists.
    I don't think I have gone from a very high to a down low in such a short space of time.  I really wanted to move on from Mountain Lion and when the installer finished the upgrade to Mavericks and re-started my MBP, I was super excited.  When the restart completed and I was presented with the login prompt, I tried entering my user name and password.  First time, it shaked on the password... OK, you'd think that is a typo.  Re-entering the password... same thing.
    You can imagine what ensued.  After entering my password v-e-r-y slowly many times, I started realising that something went very VERY wrong.
    Just for information, I used two different user accounts on my MBP under Mountain Lion.  The one account had administrative priviledges and was only used for installing applications and a few other administrative tasks.  Then I have a second personal account, which does not have administrative priviledges and is the account I use daily for Mail, Safari, iTunes, programming etc.
    None of those accounts worked under Mountain Lion.  Basically, there is no way in.
    I then proceeded to boot with the startup option Cmd + S (command-line access).  Once that was completed, I was in as root and checked the /etc/passwd.  None of the user accounts were there.  I was only able to find two user accounts: root and nobody; and a long list of user account that started with an underscore (I think these are some sort of esoteric user accounts).  So, it appears that the Mavericks upgrade did not accurately bring over the user account information from my Mountail Lion installation.
    Then, I went into the /Users directory and there I could see the home directories for all the users as they were defined under Mountain Lion.  The contents were intact too.
    It seems to me that the Mavericks upgrade from my Mountain Lion forgot to bring over the user accounts but it did preserve the contents of all the users' home directories.
    Unless anyone can spot some sort of user error here (please let me know), I am heading back to Mountain Lion pretty swiftly.  Otherwise, I suspect there is a bug in the Mavericks installer.
    Any assistance is appreciated.

    The reason this occurred is a mystery and has not been commonly reported. Consider the following. It may or may not help. You should probably print these instructions before proceeding.
    Boot Single User mode again and do the following:
    (You can skip the first step. It will check your boot volume for errors and correct what it can. If there were errors the installer should not have proceeded, but the possibility exists that directory corruption may have occurred during installation. That seems unlikely to me but could explain what went wrong.)
    In Single User Mode:
    At the :/ root# prompt, type fsck -fy and press Return or Enter. It will take a few moments to complete. If you are concerned that nothing is happening just press the Return key until you see the :/ root# prompt again.
    Once the disk check is complete and the prompt returns, type mount -uw / and press Return / Enter.
    Type launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist and press Enter. If you get an error message you may ignore it.
    Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are.
    Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing password with the new password of your choice. Press Enter. You will likely get an error message about a file or directory not being found. You may ignore this.
    Type reboot and press Enter.

  • I have upgraded from Mountain Lion to Mavericks, since then my Adobe Flash Player don't want to work?

    Hi, can anybody help me please, i have upgraded from Mountain Lion to Mavericks, since then my Adobe flash player don't want to work.
    I clicked on update and downloaded the update from Adobe and installed it.
    Every time i get an error saying - "that this wasn't downloaded from App Store".
    i can not find it in App Store.
    What must i do?

    Try this: in your Utilities folder launch Adobe Flash Player Install Manager and run it to completely uninstall Flash. Then go to http://get.adobe.com/flashplayer/ and download Flash
    Once downloaded, double-click to open it and run the installer. If you get a message saying the file can't be opened, or similar, Control+click or right click and select 'open' and should then be able to proceed to install it.

  • I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
    1. Make sure that the right volume is selected in the Startup Disk preference pane.
    2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
    3. Reset the System Management Controller.
    4. Reset the PRAM.
    5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
    /var/folders
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

  • I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

    I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
    The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

    Hi, drjbuchanan.  
    Thank you for visiting Apple Support Communities.  
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue.  
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/en-us/ts3430
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/en-us/ht2311
    Cheers, 
    Jason H.  

  • Upgrading from Mountain lion

    I am upgrading from Mountain Lion to Mavericks. I tried to install Mavericks from the AppStore, everything went OK (download, etc), until the system had to reboot and it was when everything failed. The system couldn't start, it stalled when the apple logo appeared, but the mouse was resposive (really weird). I tried several things cleaning the PRAM, etc, and there was no booting, or alternative to start the system. After trying all the different combinations to boot and see no change, I realised that the left option key somehow was unresposive at startup, and that was one of the identified problems. However, I manage to use the right option key and I was be able to boot from an external hardrive using a recovery partition from a clone of my system. I restored the system with my back-up from Time Machine of 10.8.5. I have a mid 2010 MacBook Pro, where I have a SSD drive. My drive is OK and It was checked prior to installation of the system etc. Any Ideas on how to able to install 10.9, or an expected release date of a new installer? It seems this has been happening to a lot of people.

    OK,
    I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
    Backed up to an Time Machine Drive
    Reset the EPROM (zapped it or whatever they kids these days are calling it)
    Booted off a Mavericks USB stick.
    Ran Repair Disk & Repair Permissions
    Installed Mavericks
    Worked fine, took a while but up and running.
    Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
    Eoin
    <Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!)

  • After upgrading to mountain lion my calendar does not print in weekly mode anymore

    after upgrading to mountain lion my calendar does not print in weekly mode anymore

    I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
    Could be the Mountain Lion objective-c framework has a buffering issue.
    Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
    Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
    My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

  • Can I upgrade from Mountain Lion to Yosemite if I didn't upgrade to Mavericks?

    I didn't upgrade to Mavericks. Can I still upgrade to Yosemite from Mountain Lion? If not, where an I get a Mavericks?
    Thanks!

    Yes.

  • Just upgraded from Mountain Lion and now some programmes do not work. How to go back to Mountain Lion

    Just upgraded to Yosemite from Moutain Lion. Want to go back as it refuses to run some programmes

    Yosemite/ OS X Mavericks: Revert to a previous OS X version

  • Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

    Will the performance of Final Cut Express, currently running under Mountain Lion OS X 10.8.5 (12F45), be improved by upgrading to Mavericks?

    Ian R. Brown wrote:
    .  .  .  .  but you will need to have Mavericks installed to use FCP X.
    Should you feel the urge to give it a try, this website has a free 2 hour course of video  tutorials that will get you off to a flying start.
    http://www.izzyvideo.com/final-cut-pro-x-tutorial/
    There are some 26 "bite-size" lessons so it's not too daunting.
    Quite right Ian.
    Probably should have mentioned it. 
    Al

  • The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

    Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
    thanks

    Hi BobRz,
    As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
    1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD  ?
    2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
    Thanks.

  • Maverick upgrade from Mountain lion question

    Can anyone tell me if any of the following issues has been addresses?
    1) When you download Maverick there is no USB or DVD option, so can you confirm the O.S. validity by performing a SHA 256 hash verifiication of the operating system?
    2) The older version of snow leopard you could check the installd version of updates applied to the operating system. Does Maverick display the installed patches that have been applied?

    1) not sure, but if you download from the App Store, there is no need to verify the download. The App Store is isolated and secure.
    2) do you mean like this?

  • Error when upgrading from Mountain Lion to Mavericks

    Has this happened to anyone and what did you do to resolve it?  Error: "install failed - The OS X upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired.  After your computer restarts, back up your data, erase your disk, and try installing again."

    OK,
    I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
    Backed up to an Time Machine Drive
    Reset the EPROM (zapped it or whatever they kids these days are calling it)
    Booted off a Mavericks USB stick.
    Ran Repair Disk & Repair Permissions
    Installed Mavericks
    Worked fine, took a while but up and running.
    Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
    Eoin
    <Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!)

Maybe you are looking for

  • Spro settings- Purchase order History

    Hi, In spro> MM> Purchasing-->Maintain Purchase Order History Categories. can somebody help me out how it works and the concept. I have maintained the entry there with Z- forwarding charges as long and short text. I donot understand where is the link

  • How to get SAP report that inculde PR number, PR amount, PO number, PO amount and cost center ??

    Please help! How to get the report in SAP that include information of PR number, PR amount, PO number, PO amount and cost center in one report?? I try ME5A but th ere are no information of PO amount.

  • How Do I Assess The Number Of Times A Page Has Been Hit?

    Can anyone identify the schema, table and field that when queried identify the number of times an individual page has been accessed? I want to create a 'hit counter'. Ideally the field would identify all accesses, not by IP address or username or any

  • SAP-ISU - Equipment number from installation

    Hi All, Regarding SAP - ISU. How to fine Equipment number from installation. Is there any table or function module. Please let me know. Please mail to *msrinuvas@gmail. com                        [email protected] * Thanks in Advance ! Regards, Srini

  • Coloring an ALV Cell with DYNAMIC INTERNAL TABLES

    Hello Gurus, I need your help regarding coloring of a cell in my ALV Grid report with DYNAMIC tables. I have used the call method in calling my ALV. (CALL METHOD gr_alvgrid->set_table_for_first_display). Now my problem is, I can not bring out the cel