Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

Never mind my question on the photoshop elements 13 trying to install the camera raw update. It has been taken care of thank goodness!

Similar Messages

  • I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing

    I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing happens.  Voice just tells you the unlock button, time, poweroff button.
    Please help also itunes says I need to enter on iPod the passcode to reset to factory.  I can't get it open to enter passcode, slider doesn't work.  It is one day old and this happen xmas afternoon.  PLEASE Help someone

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS3219 i am setting up an ipod touch for my daughter, created her an account, had it verified,  but when I get to the section that reads 'connect to itunes' I plug it into the computer with her log in and nothing happens.  HELP.  I have been at this for 4

    i am setting up an ipod touch for my daughter, created her an account, had it verified,  but when I get to the section that reads 'connect to itunes' I plug it into the computer with her log in and nothing happens.  HELP.  I have been at this for 4 hours

    Hello GJS6,
    Thank you for the details of the issue you are experiencing when trying to connect your daughter's iPod touch to the computer.  I recommend the following article:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Charger that came with Ipad gets hot and only charges for a short time or not at all

    charger that came with Ipad gets hot and only charges for a short time or not at all

    Stop using it and Return it to the Place of Purchase and get it checked... ASAP...

  • TS1424 A few purchased Songs only play for a few seconds or not at all...

    I have a few songs that after purchasing on i-tunes, they play for a few seconds and that's it.  How do I fix this?  Do I have to delete them from my i-tunes folder and then go to songs purchased and download them again?

    Yes, assuming you are in a region where you are permitted to redownload your music purchases delete the copies of the corrupt tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If the problem persists contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

  • When I try to use my remote to input Wifi password, only the down arrow works...how can I fix this?

    When I try to use my  remote to inut WIFI password, only the down button on the remote works.  How can this be fixed.

    likely the microswitches inside the remote are broken and you need a new remote

  • I am running firefox 23.0.1. I just upgraded to evernote 5.0+. When I try to add webclipper 5.7 to firefox I get the error Firefox can not modify the neede

    I am running firefox 23.0.1. I just upgraded to evernote 5.0+.
    When I try to add webclipper 5.7 to firefox I get the error
    Firefox can not modify the needed file
    I could not locate the files referenced in the answers presented.

    Firefox no longer unpacks an extension automatically, but renames the XPI file to the ID of the extension and copies that file to the extensions folder in the Firefox Profile Folder.
    If an extension needs to be unpacked then there should be an unpack directive (<nowiki><em:unpack>true</em:unpack></nowiki>) in the install.rdf file of that extension.
    * https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    You can try to set the extensions.alwaysUnpack pref to true on the about:config page.
    *http://kb.mozillazine.org/about:config

  • TS1702 the walking dead in-app purchase won't work?  just says purchasing and nothing happens for over an hour?

    I just purchased a new IPAD.  App store works fine to purchase apps but when I play THE WALKING DEAD it will not allow me to purchase in-app levels??  It just says "purchasing" and nothing happens for over an hour.  I have reset, redownloaded the first version, all software is updated.  The full game can not be purchased in ITUNES so please help!

    Nobody can help you without proper system and version information or other technical details. if the update is botched, then run the cleaner tool and reinstall from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes.  When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126).  Can anybody tell me what this means?  Thanks

    When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes.  When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126).  Can anybody tell me what this means?  Thanks

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When I try to use Mac Help or any other help menu, the help window opens up but it is empty.  How do I resolve this issue?

    When I try to use Mac Help or any other help menu, the help window opens up but it is empty.  How do I resolve this issue?

    Try moving these files to the Trash one at a time and test (but don't empty yet.)
    /Users/yourusername/Library/Preferences/com.apple.helpviewer.plist
    /Users/yourusername/Library/Preferences/com.apple.helpviewer.LSSharedFileList.pl ist
    If doing this doesn't help, then navigate to this location and delete the cache (but not the enclosing folder.)
    /Users/yourusername/Library/Caches/com.apple.helpviewer
    All are located in your home folder Library.

  • HT2404 I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!

    I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!Help!

    Here are a bunch of things that you can try to get the downloads to resume.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • Hi there, Can you please HELP ME? I created a signature for my email account, but I can not choose it because the option is daded under "none"and nothing happens when you click on it! Thank you, Johan

    Hi there, Can you please HELP ME? I created a signature for my email account, but I can not choose it because the option is daded under "none"and nothing happens when you click on it! Thank you, Johan

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • When I try to use my Turbotax it says I currently have MAC OS X 10.6.8 and I need Mac OS X 10.7 or later.  What do I do?

    When I try to use my Turbotax it says I currently have MAC OS X 10.6.8 and I need MAC OS X 10.7 or later.  What do I do?

    I guess you upgrade or visit H & R Block.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
                 Identifier 5,1 or later.
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
             7. Xserve (Early 2009) - Model Identifier 3,1 or later.
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

    Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What  can I do?

    Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
    1. Reboot and immediately hold down command and R (two keys).
    2. When you see the screen shown on this page, select Disk Utility and continue.
    3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
    4. After Repair Disk, click Repair Permissions.
    Quit DU and restart.

  • My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    My youtube videos are only running for a few seconds, then stop.  Is this an issue with my macbook?

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

Maybe you are looking for