Just updated my iphone to ios6 and when i plug it into my computer it won't show up in itunes???
I have just updated my itunes as well
Have you got the latest version of itunes? I assume you have because you say you have iOS 6. Try a different cable or a different USB port so if that helps
Similar Messages
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port
Try:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not omit the Additional Information paragraph.
Is the iPod that connects an iPod touch? If not that does not mean anything since iOS devices like iPod touch, iPhone and iPad use different drivers than other iPods. -
i just got an IMac, and when i plug my IPad in, the device is not showing up on itunes ? can anyone help me ?
i tried many times, and it still dosent workTake a look at this Apple article -> iOS: Device not recognized in iTunes for Windows
Is the Apple Mobile Device Service installed and running on your computer? -
My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?
That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.
-
My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP
I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
Does this mean that my phone battery is dead?
Is there anything else I can do?? -
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I locked my ipod then went to turn it on and nothing happened. Even when i put it into the computer nothing happens. what can i do?
Try a hard reset and go from there.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
new ipad won't charge but i can download everytthing but the top says not charging and its at 20%
That is perfectly normal with the new iPad. Your USB port does not supply enough power to charge the iPad. This is copied from Apple's web site about the iPad battery.
Charging Tips
The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode. Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
You can read the rest of it here.
http://www.apple.com/batteries/ipad.html -
when i plug my ipad 2 into my computer to set it up, no onscreen instructions pop up. how do i set it up?
Lindsey-
Did you download iTunes and install it on your computer?
If you run iTunes with the iPad connected to your computer, it should appear under DEVICES at the left side of the iTunes window. By clicking on it, the instructions you need may appear.
Fred -
I have just updated my iphone to ios6 and now my music will not update?
I have only heard bad things about the ios6 update, hence why i have been postponing up dating it.
so i finally do update it and now this?!
When i re sync the music it will not update at all :/
if any one knows how to help it would be muchly appreciatedSee if this helps
http://support.apple.com/kb/TS1559
if not, it is a hardware failure. Contact Genius bar for evaluation and possible replacement. -
please someone tell me what to do i have no idea where to put in the passcode let alone know what it is! and i need it because i need to sync all my contacts and apps and everything onto this new iphone
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
My screen has been cracked for a while now and today I dropped it and parts of the screen on top came off and the phone went completely black. I tried calling it and it rings as usual on the line but my iphone doesn't make any sound. I just plugged in my phone to my macbook and i am still able to import pictures and send imessages but while it's plugged in my phone constantly beeps..the same beeping as it does when its on the charger but it's just one beep every couple seconds. People have been telling me it could be the LCD..any thoughts?
Ask Verizon.
If you don't know whether you have AppleCare+, you can find out warranty information by entering the serial number at http://selfsolve.apple.com. The serial number can be found under Settings > General > About > Serial Number, if you are still able to use the phone. If not, eject the SIM card tray from the right side of the phone using a paper clip or SIM unlock tool. It is in very tiny print on the rim of the tray.
You cannot purchase AppleCare+ if it's been after 30 days or the phone has already been damaged like yours. -
My ipod touch screen went white and when i plug it into my computer....nothing happens. help!
I went to turn on my iPod Touch one day and the screen went white. Tried resetting and got nothing. Tried plugging in to usb port and got nothing. Neither the computer nor iTunes recognizes my device. What do I do now?
By resetting did you see the apple logo? Try pressing and holding the on/off and home buttons simultaneously until the screen goes blank (black) and you see the apple logo. It should take about 10-15 seconds to reset.
-
i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....
If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
If no luck try to proceed without entering the password. If you can get the iPad functional go into
Settings > ITunes and App Store and log in there.
If you can log into to your Apple ID there you will also need to go to
Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
Also
Settings > FaceTime > check or enter the email address you want to be reached by FaceTime.
Maybe you are looking for
-
Monitor Calibration & Lightroom 2
Hello, I have a problem. Normally I shot in RAW, edit the image, save a jpg (with sRGB Color space) resized for an on-line printing service and another jpg in full size and resolution. Recently I bought a Spyder express monitor calibrator, so I have
-
How to find the last update date time and user of record field peoplecode
how to find the last update date time record field peoplecode? Thank you.
-
made dupe of clip in v1 and put in v2 directly above. selected image flipped image around and then did a horizontal flop (and tried unselecting image)for mirror. selected effects/video filters/matte/ mask shape as soon as I selected mask shape my ima
-
hi is itunes ringtones available in australia? its noted in itunes help that creating rintones can work in selected countries. i purchaseded itunes track & when i create ringtone from file i get error msg "itunes could not connect to the itunes store
-
Open Firefox pdf downloads in acrobat
My downloaded pdfs are storing in Downloads and I want them to auto open in Acrobat. Can anyone tell me how to do that?