Just upgraded my OS10.4 to snow lepard  and now itunes will not open. I hope to further upgrade to Lion. Ps my address book will not open either!

operate or open, also my address book will not open. Am hoping to upgraded further to lion asap.

Office 2011 will install in a separate folder. But do not install Office 2011 until you remove Office 2004. It comes with its own uninstalled located in the MS Office folder. Only use the uninstaller to get rid of it. Then install Office 2011.
Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Similar Messages

  • Just upgraded macbook to Snow Leopard, and now itunes won't recognize my iphone.  I tried turning all off, and on.  I have the newest version of itunes.  Will I have to reset my iphone (and also ipod touch?), and if so, does it mean I lose anything?

    I just upgraded macbook to SnowLeopard 10.6.3 and now itunes won't recognize my iphone.  I tried turning everything off and restarting.  I have the latest version of itunes.  If I have to reset the phone (and ipod touch), what does that mean?  Will I lose anything? How long will it take?  thanks

    Start iTunes.  Make sure you really are running the version you think you are.  Sometimes people end up with two copies, different versions.
    Mac OS X v10.6: iOS device not recognized in iTunes after restart - http://support.apple.com/kb/TS3540
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311  - read section on Opening iTunes for information about running multiple copies of iTunes.
    You say you are running Snow Leopard 10.6.3.  That version will not run the latest iTunes which requires 10.6.8  If you need iTunes 10.7 you have to be running 10.6.8
    Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399
    Message was edited by: Limnos

  • I've upgraded to firefox 4/snow leopard and now my .avi's won't play using the quicktime plugin. What am I doing wrong?

    I'm unable to play .avi's in Firefox 4 that worked fine in Firefox 3. I just get a blank page. I've also upgraded from Leopard to Snow Leopard (prior to upgrading Firefox) since the last time I viewed them.
    I'm serving these files from my local harddrive so the url starts with file::
    I believe these were displayed using the quicktime plugin. Firefox reports my current quicktime plugin as version 7.6.6
    I need to get this working because I'm giving a talk soon, and I've been using references in my talk pdf to link to the movies.
    ======
    Just checked, and my movies play fine in Safari. Crud. I'd rather not have to switch to Safari as my default browser. Yuk.

    Update: Turns out this is only a problem when the .avi is stored locally and served locally. I uploaded the file to a server and then pointed Firefox there. In that case it displays just fine. Weird.

  • My iPod Classic just emptied itself of all my music and now iTunes freezes when I plug my iPod into my computer. What is happening to it and how can i fix it?

    My iPod Classic was charging and after I ejected it from the USB cable all of my music is somehow gone and now when I plug it in iTunes freezes. my question is WHY???

    See Corrupt iPod classic.
    tt2

  • I upgraded my imac to snow leopard and now every time I click the mouse I get the spinning wheel of death

    One morning a week ago I got the "White Screen Of Death" and my desktop imac wouldn't load so mac support told me I had to erase my history and upload imac again. We went through every senario to get it to work to no avai. I had a snow leopard disc so I uploaded that as well. In the last few days I click on my mouse and I get the "Spinning Ball Of Death" most every time I click. It lasts for about 5 - 20 seconds every time. I am not a "techie" at all. Is there any way to stop this. I am not sure what could be causing this. I erased my browers cache on Safari and that didn't help. I also turned the comp. off then back on and that didn't work either. Any advice would be greatly appreciated. Step by step how to's? I am not totally ignorant in computer speak but not an expert by any means. Thanks!

    Greetings,
    What do you mean by "events to update"?  Do you mean invites to new events or changes to existing invites?
    Troubleshooting:
    1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
    2. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps!

  • Running osx 5.1.1 upgraded my 4s to 6.0 and now itunes doeses work sudgjestions

    so after my 4s bugged me for a week i fiddled around and upgraded the os to 6 played with it for hours its time for bed lets snyc up right nope wrong. i have an old mini os 5.1.1 so itune is v. 10.6.1 (7) says i cant use this old of a version with this phone now that i upgraded? wha should i do?do i have to pay more money now that i ugraded like buy a newer os? is there some way to uninstall 6.0 so i can put my crap on this crap box did i brick this thing whine moannnnnnnnnnnnnnn

    so itune is v. 10.6.1 (7)
    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • Installed new OS and now iTunes doesn't show any of my apps, music, etc.  They don't show on my phone either.  But i can find them on my computer iTunes folder.  any ideas on what's happening?  how do i get everything back.

    installed OS 5 but it froze up.  had to restore my phone.  then i tried to sync with my iTunes but my iTunes folders are completely empty.  But all the files are on my computer. how do i make my phone find those files and sync

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Hope this helps,
    JD

  • Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

    Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

    Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

  • I just did an Time Capsule firmware update and now my Time Capsule is dead.  What happened?

    I just did a Time Capsule firmware update and now my Time Capsule is dead.  What happened?

    tresbaileys wrote:
    it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility).  Ideas??
    That is very bad.. how old is it??
    The Gen4 TC can die this way.. it is not usual but it happens.
    Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
    The Factory Reset.
    Power down the TC.
    Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
    (I fix TC and have several reset levers bent over and jammed or broken off).
    Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
    Keep holding in reset for about 10sec until the front LED flashes rapidly.
    Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
    Tell me exactly what the LEDs do throughout this process.
    Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
    If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
    I kind of doubt you are going to get this going again... but we can try.

  • How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    Richard Kerns wrote:
    And it kills me that a friend who has pc computers and just has an iphone and ipad can breeze through all this with no problem and he still has XP.  So Apple goes back and helps old OS for pc but not for it's own kind!!!
    Richard, I agree with you 1,000%. I wrote this in a forum a few weeks ago, when a user was complaining about Snow Leopard not supporting iCloud:
    Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
    Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
    If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
    (P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)
    I got so angry thinking about this, that I ended up writing an angry note to Apple on their feedback page. After repeating what I just wrote here, I asked them to commit to providing at least the same level of support to Mac users that they do for PC users when it comes to their cross platform products (iPhone, iPad, iCloud, Apple TV, Safari, iTunes, etc.) And, really, is that so much to ask?
    I wish I knew how to start a petition requesting that Mac users get comparable treatment as PC users. But then again, shouldn't that go without saying?
    Please leave feedback about this revolting double standard on the Apple feedback page. They should be thinking long and hard about why their own customers are treated worse than the customers of their competition.

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I just downloaded the latest version of Snow Leopard and now my iWeb won't open.

    I just downloaded the latest version of Snow Leopard and now my iWeb won't open. Does anyone know how to fix it?

    If wish an answer, additional information would be helpful.
    Allan

  • I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.

  • IMovie wii no longer share with iDVD.  I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly.  Any thoughts?

    iMovie wii no longer share with iDVD.  I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly.  Any thoughts?  This is what comes up.....

    iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/Preferences folder.
    2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    If iDVD crashes again post the first 50 lines of the crash report.  Don't post a screenshot but copy and paste the actual text.
    To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

  • I upgraded to snow lepord and now when i try to open some of my pictures i get a "!". the pictures show in the thumbnails, so I know the are there but the wont open

    I upgraded to snow leapord and now when I try to open some of my pictures in Iphoto I get a "!". They are still in the thumbnails but when I click on them they wont open. Any help out there?

    Have you delete any original photos recently?
    What version of iPhoto?
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

Maybe you are looking for