JVRD (VAT) is not appearing in PO

hi
I am using TAXINN procedure ,for VAT calculation i have maintained JVRD condition type in taxprocedure,I have maintained condition record in FV11 for  JVRD.now when i create PO ,by entering tax code V1,i have clicked on Taxes tab,in next screen all taxes are shown/calculated .here  JVRD is not displaying .....wats wrong  Can u tell me please..
JAl

Dear Jalinder Navale 
I think if you have maintained the conditions record in FV11 and you have mentioned that u have maintained it
Just do the following checks:
1) Check whether u have marked deletion flag.
2)Check the Validity date lets say 01.01.09 to 31.12.2999 in that case u should create the PO in that validity range only.
3)check whether you have entered the Tax code V1 for that condition.
Finally also check your TAXINN procedure whether for JVRD condition you have mention any accrual key ...coz JVRD is VAT on which u take credit so check whetehr NVV has been set if yes then remove it and Set it as JP5 (Deductible )
Also check the calculation  i.e from and to  in TAXINN .... It should be on Basic Price+ ED+Sec Ed Cess + Hcess   
Let us know if u need any input
regds
shailesh

Similar Messages

  • MM:JVRD VAT is not calculating in Pricing

    Dear Gurus,
    We are using TAXINN,now I have maintained condition record for JVRD,i.e. VAT
    But despite condition value is not getting calculated in Pricing..........but when I check cond base value is getting calculated
    Plz help me to get solution of this
    Rgds,
    Vinay

    Hi,
    JVRD - VAT condition is not an element of Pricing Hence please check in the taxes tab under Invoice tab of Purchase Order.
    Regards,

  • Tax classification fields are not appeared in master data

    Dear Experts,
    I searched the forum about my issue but i did not get any solution.
    I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
    FYI
    I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
    EX:
    AT   MWST
    DE   MWST
    But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
    Note:Country of plant,company code and sales organizations is IN
    Help me to view tax classification fields in Master data.
    Thanks&Regards
    Ravikumar.R

    Then how system knows this customer is liable for JLST.
    In customer master, under the Taxes tab, it would be like
    Country::::Name:::::Tax Cat.::::Description::::Tax Classification
    While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically.  You just have to input tax classification as 1, 2 etc.,
    Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
    Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
    G. Lakshmipathi
    ps:  please spell the name correctly

  • Surcharge on VAT is not calculating

    Hi CIN Experts
    When BED, Cess and SEcess values are changed in MIGO, then during MIRO, VAT is getting calculated correctly but Surcharge on VAT is not getting calculated on changed VAT. When I searched for the same in SDN, I got one user exit J_1I7_USEREXIT_PROCESS_TKOMV. But I do not know where and what code need to be written here. Please tell me if some one has written code for this.
    Appreciate your quick response.
    Thanks
    Ravi

    Hi Shrikant
    This is the code we used. Please award points if useful.
    data : gc_vat type konv-KWERT.
    loop at xkomv.
      IF XKOMV-KSCHL = 'JVRD'.
        gc_vat = XKOMV-KWERT.
    ENDIF.
      IF XKOMV-KSCHL = 'YVRD'.
       *XKOMV-KWERT = gc_vat * XKOMV-KBETR / 1000.*
       ENDIF.
    IF XKOMV-KSCHL = 'JVRN'.
        gc_vat = XKOMV-KWERT.
    ENDIF.
    IF XKOMV-KSCHL = 'YVRN'.
       *XKOMV-KWERT = gc_vat * XKOMV-KBETR / 1000.*
       ENDIF.
       modify xkomv.
    endloop.
    Thanks
    Ravi

  • VAT numbers not determined on invoice

    Hi Friends,
    I have an issue. VAT number does not appear on all  invoices raised for deliveries (originating sales order is same for all the invoices).
    The issue seemed to be linked with the assignment at sales order items for country of destination.
    When the destination country is DE, the VAT number is determined,
    Where as when the destination country is BE, the VAT number is not determined.
    Here the catch 55 as well as issue (What I do not understand is ): Since the originating sales order is same, so is the ship to party same for all devlieries and line items, so, I could not understand how the destination country could be different for different line items?
    Could you please give me some basic knowledge I could be not understanding.
    Regards,
    Sanson

    Hi win,
    I have an issue. VAT number does not appear on all invoices raised for deliveries (originating sales order is same for all the invoices).
    Where it is not appearing on ouput?.
    Regards,
    Madhu.

  • Transaction key NVV not appearing in OB40 transaction

    Hi,
    I have assigned account Key NVV to the condition type JVRN - VAT/LST Raw Mat Inv in the Tax procedure (Tcode OBYZ). Now I want to assign G/L account for the Account Key NVV in the transaction OB40, NVV is not appearing in OB40.
    What could be the issue & Solution.
    Kind regards,
    Kishore

    Hi,
    Now I want to assign G/L account for the Account Key NVV in the transaction OB40, NVV is not appearing in OB40.
    Its sap standard non-deductible account key which we have to use .
    why you not create new one and assign there in place of NVV ?
    if you change NVV your change applicable for not only CST but for all where you used it
    so create new and assign there
    Regards
    Kailas Ugale

  • I am trying to set up Sharing amongst several computers on my home network.  I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up).  There is no explanation why.

    I have been trying to set up Sharing between two computers on my network. I did this once and it worked.  However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer).  There is no explanation as to why not.  Is this a configuration problem, a network problem or what?   Can it be fixed?  I have tried turning sharing off and back on on both computers but to no avail.  What am I missing?  Thanks for any help you can provide.

    Hey innerev2003,
    Thanks for the question, and welcome to Apple Support Communities.
    If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
    If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
    iTunes 11 for Windows: Manage your iTunes Store account
    http://support.apple.com/kb/PH12507
    Thanks,
    Matt M.

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • External Hard Drive does not appear in finder

    We purchased a 1 TB G Drive Q from the Apple Store. It is connected to my wife's iMac running the most current update of Leopard by 800 firewire and appears on her desktop and works flawlessly with time machine. I am connected to the same drive intermittently with my MacBookPro also running the most current update of Leopard. i connect with 400 firewire. Initially the drive would not appear in the finder. for the initial backup, i turned the hard drive off and on and then it would appear and i did the backup but now when i connect to the 400 firewire port, it still doesn't appear in the finder. i would much prefer not to need to turn my back up drive off and on each time i want to use time machine. i should also mention that when i connect any of my garmin training devices or my power meter by USB it is recognized very quickly as a device in finder. any ideas? i understand this may be one of the problems fixed with SnowLeopard. thanks.

    I am not sure what you are attempting to do. I assume that you are not trying to connect two computers to the same external drive at the same time. That will definitely be problematic. In order to effectively use Time Machine with two Macs, you should partition the drive into two partitions. Also make sure that the drive is using a GUID partition scheme.
    bd

  • BPM Application Link does not appear in BPM Workspace (11.1.1.7)

    I spent huge amount of time to reveal why does that happens.
    All that follows further is valid for BPM Suite 11.1.1.7.
    The scenario.
    You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
    But the application link did not appear in BPM Workspace.
    Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
    At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
    The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
    Else the Appication Link will not appear.
    One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
    The second find is a bug (is think so).
    If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
    If you look to organization.xml you will see something like this:
            <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
                <ns5:name>StartTask.InitRole1</ns5:name>
                <ns1:processRole id="InitRole" name="InitRole1"/>
            </ns1:applicationRole>
    The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
    When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
    After that "applicationRole id" != "applicationRole name" and the Link does not appear.
    How to fix?
    Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
    That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
    Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
    In that case the associated swimlane will have the same name as the "applicationRole id".
    Hope this helps somebody
    Oleg

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • Tab Strips are not appearing correctly

    Hi all,
    We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
    I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
    Any help would be highly appreciated.
    Thanks
    Harshmeet

    Hey,
    Thanks for the reply. PFA the screen shot
    This is how it is appearing, somewhat broken and some space below the tabs.
    Thanks
    Harshmeet

  • File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

    In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all.  I have reset the preferences numerous times and am good to go until I shut down my computer.  When I reboot they are gone again.  I have a Mac with OS 10.10.2 (Yosemite) and CC. 

    Mardi Carter wrote:
    I shut down using "Shut Down" under the Apple menu.....always…
    Well, that's fine for the OS, but sometimes not so great for Photoshop.  Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
    Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
    You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
    Forget about "it had never happened before", Yosemite is a work in progress.  Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5.  That has proven to be the nature of the beast.

  • Crystal Reports - Charts do not appear on reports in some cases

    We have a few reports that include charts on them (created with Crystal 2008 Designer).  These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
    Wait...  This has a curve ball...
    The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear! 
    I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
    Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
    Thanks for any help - much appreciated.

    Nope...  Not video corruption...  We finally figured it out...
    Its the 12_0 runtime.  Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
    Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
    Problem solved.
    Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

    Hi All,
    I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
    The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
    Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
    There are no errors in the log regarding the deployment of the DC, or the scheduler task.
    There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
    CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
    But I still dont see the task listed in Global Services -> Scheduler Tasks.
    Does anyone know what might be causing this or how to diagnose the problem further?
    Cheers,
    Steve

    Hi Srini,
    No it doesn't it just has the run method which is generated automatically.
    I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
    I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
    The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
    The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
    Has anyone out there got a working Scheduler Task in a Portal Application DC?
    Cheers,
    Steve

Maybe you are looking for