K7N2 Freezing(must read this)

every freezing problem is now resolved  
i try lots of program & K7N2 motherboard or 128bit memory argitecture ,something on this board cant handle all program(i think every program must have somekind of update becose of memory arcitecture or something like that,,
first my firewall - find new one & works  
& there are somekind of new virus that find game codes & all kind of serial numbers & that will freeze up every machine i did have it too  
but now everything is fine & just make goals NHL 2004  
K7N2 DELTA-ILSR
3000+ Barton 166FSB(333mhz)
2x512mb APACER 166FSB(333mhz)
Radeon 9800 Pro 128MB Hercules
120GB Maxtor IDE
Samsung SyncMaster 959NF
LG DVD/CD-RW Combo
TruePower 380Watt & tested my  :shocking:old 550W Q-tec is working fine but i use True becose of quarantee  

ZoneAlarm did not work with some other software or just meaby it didnt work with K7N2  
so anyway ,, everytime i turn zonealarm off all freezing was gone & no problems at all ,,
there is update soon to fix this problem but i use PC-Cillin 2002 atleast it works good & come with MSI motherboard  
& there are antivirus on same program so i need lesser program
im only meaning it´s not allways PSV,Memory jne jne
K7N2 DELTA-ILSR
3000+ Barton 166FSB(333mhz)
2x512mb APACER 166FSB(333mhz)
Radeon 9800 Pro 128MB Hercules
120GB Maxtor IDE
Samsung SyncMaster 959NF
LG DVD/CD-RW Combo

Similar Messages

  • You Must Read This!

    Attention, plz!
    In our place, we don’t start the enterprise manager manually. We have a script that does that does that.
    We’ve written in gedit, or whichever emacs, etc. and put it in the /etc/rc.d/init.d directory.
    All scripts here are started at boot up of the system.
    We have a script that’s set to aid in installation.
    Now, am calling on all DBA who know little of shell scripting to come up and we develop this. We will have an absent dba-well the system is the system itself. How will that happen? We will Set a cron task that monitors the database automatically. We will have one ‘chief script’ that call on other scripts on demand. As in if its six o’clock and everyone is outta job, it raises that RMAN and backs up!
    2. Releases locks created by users trying to PERFORM DML ON same table Automatically
    3. start database and EM auto on bootup
    4. logs out idle users for a specified period of time.
    5. does automatic audit on suspicious issues, activites.
    6. WELL, AM A YOUNG DBA AND AM OUTTA SUGGESTIONS, ADD HERE FOR OTHERS TO SEE WHAT U WANT TO SEE IN OUR upcoming ‘intelligent database’.
    Be constructive DBAS, add whatever, maybe u cant do it, but someone else can! Linux evolved from this remember… group development……..lets do this, reply this post 4 all others to see now!
    Well, lets post the codes here………
    [b]

    Do you actually think I'm going to bother to read this?
    You're rewarded with: The Ugliest Post Ever Written Award (TUPEWA - on GNU/GPL)
    Yoann.

  • Droid X2 Owners with Freezes/lockups READ THIS!! and VZ/MOTO employees!!!

    I am COMPLETLEY convienced the Freeze/lockup has something to do with the SD card or SD card slot. i retored my phone to 100% stock yesterday, NO bloatware removed etc...ran so nice all day, this morning i decided to put the SD card that came with it back in the phone, formatted it, and BOOM within 15 min, SCreen lock up
    MOTO and VZ, you need to look into this. i think that is the issue on the freezes. im going to maybe call and see if i can get a replacement....
    **also has happend with a seperate 32 Gig SD card*** SD card slots bad???

    Interesting.....if you are running GB, then that's probably your problem. I have had an original DX since Nov 2010 and up until August when they released GB, I had absolutely no problems with the phone. Once GB got installed to the DX, the SD card started having serious issues. The card the phone came with just up and completely corrupted right after GB got installed on the phone, and then the replacement card that I was forced to go buy (VZW refused to replace it but that's an entirely different story) has had problems 3 seperate times since I installed it into the phone since the end of August....seems like every 3-4 weeks the SD card suddenly has file system errors and I cannot read anything on it (computer won't even recognize it), so I end up losing pictures, ringtones and other things to the point that I have regularly back everything up to my computer just to make sure I can keep these pictures and ringtones.  They're not all that important pictures, but still....if I was able to go 9 months on Froyo with NO problems with the SD card (or phone for that matter), then how come 2 months since VZW pushed the GB update to the phones are there regular occurences......something is fishy in Denmark with all these sudden problems
    I would hope that VZW and Moto would realize the problems increased ten-fold since GB was pushed and actively attempt to fix them once and for all, but I truly believe they view it as the phone being EOL (no NEW phones are sold anymore) that the issues are no longer of a big concern to them. Seems like the only answer is that as we are able to do so, just upgrade to a different phone. I know for a fact that I will NEVER get another Motorola phone.....the DX is a great phone, but Moto, and to an extent VZW, have truly caused the phone to go down the proverbial toilet, which is a shame

  • EVERYONE must READ THIS!

    OK HERE ARE SOME BASIC QUESTIONS THAT EVERYONE I'M SURE WOULD LIKE TO KNOW AS WELL AS MYSELF.
    1. Comparing Pro Tools with Logic. Which is better? Which is easier to learn. Which plugins are the best and can you use any of Pro Tools Plugins with logics.
    2. Keeping up to date with music proudction can be a pain in the but. Is there any good website out there that keep you up to date with some good plugin updates. Also what are some new and upcoming plugins that are availble for logic pro that are suggested excellent!
    3. Logic Pro To Logic Pro 7.1. Is it worth the upgrade. what new plugins are there and how do you like the comparson to the people that stitched over

    Got to say I think you guys got a tiny bit carried away with the cooking analogies...!
    LPG:
    1. Don't worry about Pro Tools, you own (or have access to) Logic Pro - this is more than good enough to make great sounding music on.
    2. Again, don't worry about other plugins. Logic ships with some great sounding plugs and while not all of them are AMAZING they are all good enough to make some hot tracks. For example, some of the "Dynamic" and "EQ" plugs are not quite up to the standards of the Waves plug-ins, but it's possible to make great sounding stuff regardless. (once you've made a few $$'s out of music, you can treat yourself to them... while not totally relevant a lot of Dizzee Rascal and his pals make stuff (or used to make stuff - reckon he might have upgraded by now!) on their Playstations (no joke!) and that'd go "off the hook" "inna de dance" : 0 ) and for example, Dnb artists Concorde Dawn make their stuff on Fruity Loops! They've had an awful lot of stuff out.... and it always sounds (even if you hate it!) well produced...)
    For other plugs, check other forums, ask nicely, and people will be only too happy to share which plugs are good. Read interviews to see what pro's use. Try google - "plug ins" or otherwise, I'm a subscriber to the "Turnkey" catalogue which is nice - each month a list forms of stuff I would love to have...
    I do think you're confusing two things here though too - Music Production doesn't really move that quick - things like headroom and compression etc have troubled people for ages - search the net when you get a chance (try digido.com, soundonsound.com). And while I guess new plug ins do come on to the market sometimes (maybe even frequently), it's all just about been done and refined significantly - someone mentioned a GSM128db cut eq/filter on here a while ago... do a quick search on "GSM plug in's" for example.... you get the picture... use your initiative as my old teachers used to say....
    3. Yes, the upgrade is well worth it. Improved stability further. Haven't really used the new plugs but that's me. Buy it!
    Hope this helps,
    Best,
    Mickey.

  • YOU MUST READ THIS IF v1.1 IS SLOW

    Sorry for the topic title in capitals but I just want to help people like me, who have a lot of work with photos and not necessarily want to spend hours reading posts. If someone can make it a sticky, that would be fine.
    WHAT TO DO TO MAKE LIGHTROOM 1.1 WORK FAST.
    1. Go to Edit --> Preferences.
    2. In Preferences go to the tab 'General'
    3. In the tab 'General' click the button 'Go to Catalog Settings'.
    4. In 'Catalog Settings' go to 'Metadata' tab.
    5. In the 'Metadata' tab UNTICK (DEselect) the following options:
    - Write develop settings to XMP for JPG, TIFF, and PSD
    - Automatically write changes into XMP
    6. Click 'OK' to save settings.
    And now the rest of the story.
    Working with version 1.0 was quite pleasant although not too fast. I've tried different settings, but there was no difference. When upgrading to v1.1 my settings were probably transfered. I don't know what these two options do as I work only with Lightroom and Photoshop. No Bridge, no RAW software etc. I work 99% on JPGs.
    When I deselected these options nothing changed in my workflow. When I want to edit in Photoshop I also have the three options (original/copy/original with adjustments). So probably many people won't need that option either. I do not plan to go into the XMP issue any further. Probably there are thousands of people in my exact situation.
    To sum things up, when these two options were selected, my computer imported 1940 files in 20 HOURS and after all the thumbs were present the computer was still using 100% CPU power doing something. It took minutes to refresh a set of thumbnails visible on screen (12 thumbs in my case). When I clicked to develop I had to wait 30 minutes for the image to appear sharp in 1:1 view. Lightroom did not want to quit using 100% CPU after 24-27 hours.
    When I unticked these options, the same photos imported within 60-90 seconds. Thumbnails were instantaneous and clicking to develop was instant. Also 1:1 was instant.
    So sorry once again for the brutal title but I just want to help people so that they avoid reading lots of posts and just getting frustrated.
    If anyone is active on other forums, please post the simple solution.
    Now I see that Lightroom 1.1 is much better in terms of speed when compared to 1.0.
    Machine: PC, Pentium IV 2,6GHz, 1,5GB RAM

    If you want the Library function, but don't want all the waiting and loading tedium, let me suggest you use Bridge/ACR4.1 for all the pre Library development and conversion steps in your workflow. including keywording, metadata, etc. Then import to LR. LR Library is not fast, but it is a lot faster if you are only using it for a DB --and perhaps the occasional touch up of an image or two. And, it will do all its importing while you have a cup of coffee.
    Then, when they do get it revved up in a future upgrade, you will have your images in the LR DB up to date and ready to go. In the meantime, Bridge/ACR will certainly be faster if you have a lot of images to process.
    I process hundreds of images a day at work, and using Bridge/ACR as the first stop in my workflow is fast compared to LR--especially since I use PSCS3 for most of my work--faster because the connection between Bridge and PS is scripted and direct, faster than the one between LR and PS, which is very elementary at this time. The Bridge interface is is more workflow efficient as well.
    At this point anyway, going through the LR DB for virtually every operation is just simply slower than working through a cached browser like Bridge/ACR. For some users that is not a price they worry about. For others, like myself, that price is simply too high at this point in time.
    I have no complaints, given that Adobe have provided ample workflow design choices for me by utilizing the best of three closely related applications--PS,Bridge/ACR,and LR

  • Lockups, crashes, video freezes, BSOD, Read This!

    ...or other mysterious ailments.
    Before you tweak anything, go here and determine your power consumption (recommended power.) Remember to add a bit if you overclock and/or run onboard graphics, and/or USB mouse/keyboard. Don't forget your sound card (if any), hard drives, CD/DVD drives, system fans, and something other than stock cooling. If you can't find your device, then find the specs and plug in something close. Also, if you OC, list your processor as the one that runs your OC speed (e..g a 2500 clocked to a 3000). Also, don't forget it's better to be a little over than a litle under.
    http://www.jscustompcs.com/power_supply/
    After determining your power consumption, look at the real specs of your supply (available from the label, manual, and/or manufacturer's website) and NOT total Rated Watts. Use the peak max wattage of the +3.3V, +5V, and +12V rails together.
    If your total combined configurations come close (say within 10%), meet, or exceed the three rails spec, consider getting a new power supply before you troubleshoot any further.
    E.g., if you run an Antec Soultion Series SL400 supply, then, according to specs, your max current draw on the combined +3.3V, +5V, and +12V rails is 380W, not 400W. If your recommended power supply figure (from the above link) is, say 360W to 375W then you might want to think about getting a bigger power supply. If your recommended power supply is 380W or more, get a new supply, no question.
    This is not a panacea (cure-all), but a very good place to start.

    Hi,
    I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
    any idea...?
      Windows XP  
    UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS!

  • For all iPad owners with video freezing concerns- read this first!

    First of all, take a deep breath, acknowledge that it is not your fault, and there is nothing you can do with the software to fix it. It is a hardware problem, most likely video chip related, that is ONLY solved with replacement. I have had several discussions with senior tech support who won't say exactly what the cause is, but admit that there is nothing a user can do to fix the problem other than replacement. Which they will happily provide. This is where it gets tricky.
    If you are like me, you can't live a day without your iPad, even though you also have a smart phone, a net book and a laptop....if I can admit it, so can you. So if your local store has a brown box replacement for your model, go in and get it replaced, and you are done. Most of the time, this will fix the issue because they test these ones first. If you are like me and your store does not have a replacement for your wifi only model, then you have to either drop yours off and wait for a replacement to be shipped in 4-5 business days, or purchase apple care where they will hot swap a new iPad with you with overnight to your doorstep. This is the way to go and here is why: you can't be without your iPad and you won't be. AppleCare is $100 that is fully refundable at a pro rated time period. So you have it for 1 week and then cancel it. Cost of use? Should be about $2. And the experience is seamless. This is just my opinion, but it worked for me!

    taffytafftaf,
    Agreed; The problem might very well be a hardware one. After all, these symptoms are very weird. It's undoubtedly a great phone. The main reason I bought it was to have the first decent looking WCDMA phone out there (that works in Europe) and I still quite like it.
    To tell you the truth though, I was going to replace it with a 8GB N91, until I tried one yesterday. It's way too bulky, actually the dimensions seem weird - nothing like my old 8850. The HDD explains everything, but I really don't need another DAP or a pocket drive, so it won't quite do.
    I'll take your advice and take the 6630 to my nearest NSC. Hopefully they'll be able to revive it. If not, I'll replace it with something very small.
    "Good luck"
    Thanks, I'll need it!
    mbamg,
    I think it's a case of "what goes around, comes around". You've obviously taken good care of your phone, whereas I haven't. I definitely should've taken it to a NSC to be updated. These problems, as mentioned above, might also have something to do with the hardware, as the phone has taken some unintended abuse during the years. We'll just have to wait and see.
    The original RS-MMC card was in the phone when it was updated. After that the phone claimed it was faulty. Other cards don't seem to work either. Unfortunately formatting them didn't help.
    I still partially blame the NSU, since these problems didn't surface until the software was supposedly "successfully updated". My 6630 is a bad combo of possibly damaged hardware and new firmware.
    Thanks once again for your input guys, I really appreciate it!
    Current communication arsenal:
    HTC P3600 / Nokia 6630 / Globalstar GSP-1700

  • Error: This item must be open to read this field while trying to access field of WI using Object Model

    Hi there,
         I'm trying to access few fields for example Description, History,Repro Steps etc. ,but I get error as
    Error: This item must be open to read this field.
    How do i fix this?
    Thanks,
    Anu

    WorkItem.Open() ?
    There is no open() method for workitem
    is there any other solution?
    Thanks
    Anusha

  • I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms that I don't see Agree button to accept. Can you check help me this problem?

    I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms but I still don't see "Agree" button to accept. Can you check help me this problem?

    If it says 'Open' in the App Store, then it's on your device.  What happens when you press the 'Open' button in the App Store?
    The App is on your phone, somewhere.  Use Spotlight to find it, or you can reset your Home Screen layout, and then you'll definitely find it.

  • I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling I must authorize this computer before it play pre purchased music. how do I authorize my computer.

    I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling me I must authorize this computer before it can play pre purchased music. how do I authorize my computer to play this music?
    Thank you for any assistance.

    Tigon's already got you covered here. But I'll chime in with some English localisation advice.
    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • "How do I defrag my mac?" "You don't need to, it does it itself" Fragmented Free Space: 99%. READ THIS NOW

    Just a heads up for my fellow Mac users.
    "How do I defrag my mac?"
    "You don't need to, ever. It does it automatically."
    "But it's running really slowly..."
    "Repair permissions or something. Defragging is not necessary on a mac."
    Techtool pro is now defragmenting my mac. Looks like the job's going to take about 4 hours. I thought I'd give everyone the truth about this while waiting (on a different computer obviously)
    The truth is, Apple's defragmenting system ***** BALLS. It has two massive, massive flaws which I feel people urgently need to be made aware of.
    #1: It only defragments files up to 20mb. If you're a movie producer, a songwriter, a photographer, or anything which involves working with many massive files, the built in defragmenting program WILL NOT HELP YOU IN THE SLIGHTEST.
    #2: It only defragments FILES. Free space is ignored, which eventually causes absolutely hrrendous problems.
    Let me give you an analogy here. Imagine your mac's hard drive is a bookcase with lots of books on it.
    File fragmentation is when it can't find a gap in the bookcase big enough for the entire book, so it breaks the book into pieces and srotes them in different gaps.
    Space fragmentation is when there are gaps all over the bookcase, instead of all the books being pushed to one side so there's a long gap elsewhere.
    Apple's built in defragmenting program will only fix the first problem - and even then, it will ignore any book bigger than 20 pages long, if you have bigger books which are broken up, you're screwed.
    Why is space fragmentation a problem? It's a problem because it directly LEADS TO file fragmentation. If there is a large block of free space all in one part of the disk, then an entire file can be written to it. However, if there is no single free block big enough for the file, it HAS NO CHOICE but to fragment it.
    So basically you might have 5 GB free and want to save a 2GB imovie project. That's cool. But what you may not realize is, the biggest single area of free space is only say 600MB. Others are around 300 and 400. Therefore the file MUST be fragmented into all these different areas, which wouldn't be necessary if all the free space was in one area of the disk.
    But apple's built in tools don't do anything about this, at least not in Tiger. PErhaps this has been fixed in later installations but I'm almost certain the same issues exist in leopard.
    Your only option is to buy a defragmenting program. I know this ***** but believe me, this IS something you NEED to do if your activity on your laptop involves disk space - intensive projects. I'm using TechTool Pro which has been recommended to me as hands down the best. It has a number of other functions as well, right now I'm only using the defragmenting tools but it has others for repairing damages disk sectors and other mantainence tools. There are other programs such as iDefrag out there as well.
    Why am I telling you this? I'm telling you because I experienced mind numbing frustration trying to get answers from the Apple community. Google it or ask the question yourself and you will most likely be whacked in the face with the intro to my post here - "You don't need to, it's not necessary, macs do it themselves, blah blah blah"
    Even worse, Apple's own webpage on the subject is nothing short of a disaster. It basically says "You PROBABLY don't need to defragment, unless you work with large files." That's it. You'd expect it to have an extra section saying "If you DO happen to work with large files, here's what you do" but no such section exists. It basically says "You don't need to defrag most of the time, and on the rare occasions when you do, well, too bad, you're screwed."
    I urge everyone to heed this or they will be tearing their hair out at how slow their mac has become and the fact that no one will offer any meaningful advice other than the standard, generic, "Repair permissions" - the Mac equivelant of "have you tried turning it off and on again".
    My disk is at 99% fragmented free space. NINTEY NINE PERCENT. In other words, although I have 25GB of free space, there was not a single contiguous block on the entire machine. I had almost 5,000 fragmented files as well, mostly imovies. Defragmenting got this down to about 300.
    The defrag job is taking more than 4 hours and will probably go on to take a lot longer than that. This machine has been slowly grinding to a halt over the last 3 years and now I know why.
    Please don't listen to anyone. Get yourself a defragmenting folder, and email Apple to tell them it's just not good enough to give their customers half assed answers and inadequate basic maintainence tools. Mac OS X must literally be the only operating system out there where something as basic as defragmenting is not only almost impossible to get answers on, but actually costs money to fix once you DO get answers.
    As customers, we should not accept this any longer. I intend to spread the above message far and wide.
    I LOVE Apple. I've always been "a mac" and I always will be. This in no way a mac bashing post or a windows endorsing one. I wouldn't switch back to windows if you gave me a million euro.
    But sometimes even the best developers can royally f*ck up. This is one of them.
    There is no readon people should be forced to put up with this crap. Absolutely no reason at all. I've had 3 months of crappy performance with no official explanation whatsoever.
    Apple if you're reading this: I love your products. I'm a loyal customer. People are more forgiving than you think, speak up, admit you dropped the ball, and DO something about it in your next updates to Lion and whichever versions of Leopard you are still actively maintaining.
    There's no shame in admitting when you're wrong. The shame is in hiding behind false promises and walls of silence.
    --Loyal customer, but feeling rather betrayed by all this.

    The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
    Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
    Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
    Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
    So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

  • Trouble shooting guide! Read this first!!!! rev 13-1-2004

    (Revision 13-1-2004)  
    Hi there,
    Follow everything on the list, even if it doesn't look like it would solve your problem, most problems are created somewhere else!
    To give some examples:
    CPU won't run FSB133....mostly powersupply or CPU-cooler.
    Videocard won't load drivers....mostly powersupply.
    Sound won't work.....mostly metal-standoff's.
    Windows won't install, file read error.....mostly CPU-cooler, Bad-ram or powersupply.
    That is why you need to go over the entire list and check all!
    Before you start doing anything, remove the power and make sure that you have touched the metal case of your system. If you don't you could damage your system due to static discharge!  
    Thanks to Arioch and Dragon60 for comments on this.
    There are several reasons why this happens.....to name the most commen:
    CPU speeds  
    You have a Duron, that CPU is 100FSB!
    You have a Athlon(XP) and it's showing the wrong speed, set the CPU-FSB to 133....
    Or 166 when it's a FSB333 CPU....or 200 when it's a FSB400 CPU....
    Some boards have a jumper to set it, other do it in the BIOS.
    Check your manual for this.
    Speeds must be:
    Duron upto 1300MHz = 100MHz (=200DDR)
    Duron from 1400MHz = 133MHz (=266DDR)
    Athlon B type = 100MHz (=200DDR)
    Athlon C type = 133MHz (=266DDR)
    Athlon XP - C type = 133MHz (=266DDR)
    Athlon XP - D type = 166MHz (=333DDR)
    Athlon XP - E type = 200MHz (=400DDR)
    Use this link to see if your motherboard actually supports your CPU.
    The TBred CPU's (0.13) start from XP-1700 and up, but not all boards support this CPU and they either show on the D-LED all red or don't start at all!!
    The K7T266pro2 is an exception, it can be made to support the TBred CPU's, on this link you find all the info on how to make it work.
    Many reports have told us that FSB333 CPU's work on KT3-Ultra boards work just fine, but it's unsupported by MSI, we don't know why....
    As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it.
    How to recognise the CPU:
    If you look on the dice, there are letters after the speed.
    The last letter will tell you the FSB of the CPU.
    B=100MHz (=200DDR)
    C=133MHz (=266DDR)
    D=166MHz (=333DDR)
    E=200MHz (=400DDR)
    To recognise a CPU quickly, checkout this link.
    Thanks Mellops.
    The MHz setting must match your setting in the BIOS for FSB value, as it translates to the correct FSB setting for the CPU.
    The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
    Detailed information on the code can be found in this AMD document. (Thanks Hans)
    CPU Cooling  
    CPU cooler not made for your CPU, check if it can handle your CPU....
    CPU cooler mounted wrong!, take it off and check it as it will fit 2 way's, but only 1 is the right one, examine very carefull!
    The cooler has a lower part that needs to go over the bump (higher part) of the socket, if it's not over there it won't cool the entire dice and WILL give you trouble.
    Also check if it's making contact with the entire dice of the CPU...
    Make sure you regrease it again, the same grease/paste can't be used twice!
    YOU MAY NEVER USE A THERMALPAD OR GREASE AGAIN! APPLY NEW EVERY TIME YOU TAKE THE COOLER OFF!!  
    top 2 show how not to do it
    Used too much silver-grease! It will shorten the bridges on the CPU, clean it and use white-paste.
    (Silver-paste is not recommended in any case!)
    The latest AMD XP CPU's (XP-2200 and above) require a copperbased heatsink because the dice is smaller and generates far more heat per square cm then the "old" CPU's do.
    How to check the cooler before taking it off.
    There is a simple way to check the cooler without taking it off.
    You do this by first checking your idle temp with PCAlert, it should be below 50-55C.
    Then you download a client from www.distributed.net, let this client run for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
    If it still goes up or the system crashes, there is a big chance you mounted the CPU-cooler wrong.
    When you can't run this check, try with FSB100, if the system does run the check then, it could be well that the cooler is mounted wrong or your powersupply doesn't have enough power.
    ***** YOU CAN'T CHECK THE CPU COOLER ON TEMPS OR FAN RUNNING, IT MUST BE TAKEN OFF THE CPU!!! *****  
    Cleaning the CPU and Cooler - thanks to Dragon60 for his addition.
    An additional comments about this is what you clean the CPU with in this situation. The best thing to use is isopropyl alcohol. If this is not available then metholated spirits would do.
    Make sure you allow the CPU to dry properly before you put it back in. This also means DO NOT try and clean it whilst it is still in the socket as some of the cleaning fluid, grease and dirt may get underneath and short some pins.
    Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may disolve some parts.
    Thanks Dragon60.  
    If you don't understand what we are talking about on this cooler matter, then read this link: AMD CPU & Cooling guide  
    Powersupplies  
    Powersupply too little, most commen cheap 300W CPU's can't handle an XP-1700 or above, try a better one to be sure.
    Make sure your powersupply has about 185W combined on the 3.3+5V and that the 3.3V has 20A or above.
    That should be enough for most systems.
    On the latest boards the 12V has become very important too, expecialy with TBred CPU's.
    Make sure yours can give 18A or more on the 12V line too.
    I have found that a lot of cheap 350W will fail with modern boards and TBred CPU's.
    Allway's make sure you have a decend PSU, it never fails to spent a bit more on that part!
    Borrow a bigger one from a friend if you are not sure....
    More info about powersupplies: Click here.
    And the second you must read: Click here.
    Powersupplies with these type of numbers on them or higher should be fine:
    3.3V - 28A or better
    5V - 30A or better
    12V - 18A or better
    Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!!
    Do NOT trust the 300W or 400W rating on them!!!
    Q-Tec is about the worst of them all!!  
    Metalclips  
    Stand-off's left between the board and the case, take the board out and check for too many of those metal-clips, they can shorten circuits and cause al sorts of problems (most of the time audio problems)
    RAM
    Ram problems, don't try to run with PC100 (SDram boards) when you have a 133FSB CPU, get PC133 ram of decend quality.
    In any case, don't use cheap quality ram (Crucial seems decend, but give's a lot of problems, I consider these cheap quality too :P ), replace the ram with another brand to see if it fixes it....
    DDR ram speeds:
    Duron upto 1300/Athlon-B =100FSB=PC-1600=DDR200
    Duron from 1400 =133FSB=PC-2100=DDR266
    Athlon-C/XP upto 2600 =133FSB=PC-2100=DDR266
    Athlon XP D-type and above =166FSB=PC-2700=DDR333
    Athlon XP E-type and above =200FSB=PC-3200=DDR400
    Higher DDR speeds are only a must if you try to overclock, they have no speed gain if run at the correct speed. You may use faster ram on a slower system, the speeds given are what is needed minimum.
    Perform RAM test tools, ie http://www.memtest.org if you suspect RAM is faulty, such as BSOD or data corruption. [added by Maesus]
    Try your system allway's with 1 stick of ram, adding more sticks can give all the trouble too.
    Some sticks just won't work in pair and a lot fail when you put 3 or more in the system.
    When you want to use 3 sticks, make very sure you use the MSI tested ones, they are your best chance that they work without problems.
    If still nothing, try to seat the ram in another slot, sometimes they work better in another slot.
    Thanks boost
    Or rise the Ram voltage a little, be carefull doing this!
    Sometimes this works when you have a lot of ram in there.
    BIOS  
    BIOS settings not right, clear the CMos and start with the default settings, if it works, try setting ONLY the FSB to 133 if needed, nothing more.....
    And go further from there......
    Clearing CMos
    When you clear the CMos, make sure that all power is cut from the system.
    This is done by takeing the wall-plug out or use the switch on the powersupply to turn it off.
    On most boards, as far as I know all MSI boards, you must set the JBat1 to position 2-3 (clear position) for about 10 seconds, then set it back to 1-2 (keep data position)
    After this your CMos should be cleared and you can turn the system back on.
    In some rare cases it's needed to take the battery out too for a minute or so.
    It can happen that the system will prompt you to set the BIOS again, go into the BIOS and set everything you need, then save the settings.
    Thanks fguevara.
    Harddisks  
    Harddisk is giving problems, most of the time with WD drive's, they are jumpered somewhat strange compared to others:
    No jumper = Stand-Alone no other drive attached to the cable.
    Jumper master = if you have a slave drive attached
    Jumper slave = when it's slave to another drive
    Harddisk is doing weird things:
    Make sure you have connected the blue connector to the board, and don't let the other end of the cable unused, make sure there is a device connected to it.
    The middle connector can be left into the air without problems if not needed.
    IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
    Click here for DFT
    Other brand drives can have problems too, make sure they are ok, as harddisk failure can cause all sorts of problems.
    Allway's be sure your harddisk is in tip-top shape, if not, replace it and try another to verify.
    For more information read this: Click here.
    To know what harddisks your motherboard support, use this link.
    To enable harddisk over 137GB in Win2000 edit this registry key:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
    "EnableBigLba"=dword:00000001
    The KT4 raid boards only support 1 harddisk on IDE3, the rest must be SATA drive's!!
    Harddisk/power led not functioning - thanks to Tweetyoost
    If your HD led or power led not work try to switch(wrong + or - side) the connectors on the motherboard.
    leds will work only when + or - is correct
    Thanks Tweetyoost.  
    Floppy drive's  
    If your floppy drive doesn't work or the led stay's on all the time.
    Make sure the floppy is set correctly in the BIOS, as the BIOS doesn't autodetect a floppy drive.
    Check the cable, make sure the twist in the cable is at the floppy-drive side.
    If the light stay's on, flip the connector at the floppy-drive arround.
    Sometimes it happens that even after all this, they still don't work, try with another drive from another brand.
    Not able to enter the BIOS or lockup  
    When you try to enter the BIOS it won't go in there or
    lockup, but your system is running fine.
    This symtom can happen when your CPU-Cooler is giving spikes on the coolerwire.
    Try with another brand of cooler to test if it solves it.
    Keyboard and optical mouse lights stay on after power off[/U]
    Some motherboards have a jumper called JKBV1, this jumper is located (mostly) near the keyboard connector, put it in the other position.
    If your board doesn't have the jumper, try to find the following BIOS settings and turn them off:
    resume on KBC
    resume on PS/2
    resume by alarm
    USB ports not working[/U]
    Check in the BIOS if the ports are enabled.
    USB2.0 ports are supported in Win2000+SP3 and XP+SP1, just let the OS reinstall the ports and they should work.
    Thanks Stygge
    Replacing parts and the system won't boot after
    It's never a good idea to replace stuff like CPU and ram without taking the board out of the case.
    But if you still like to do so, please support the board, because if you don't you might bent the board a little and cause other components to make bad contact.
    Allways support the board when you replace stuff, no matter what!
    Also make sure your system can take the replacement, it could happen for example that your powersupply can't handle your changed videocard from GF2MX to GF4Ti4600.
    Test all the parts in another system
    Make sure that the new part is in good working order in the first place (in particular: videocard, CPU, memory): try it in another system, or have it demonstrated by the one you bought it from if possible.
    Testing might also give you a clue on what is actually wrong in your own system.
    Thanks HansH.
    Checking the powersupply
    Don't do this if you don't know what you are doing!
    Disconnect the powersupply.
    Orientate the 20pin Powerconnector with the clip up.
    Locate pin 4 and pin 8 top row, mostly green and black wire.
    Use a wire to short them (or better a 12V test lamp).
    Now connect the power and the fan inside the powersupply should start spinning.
    If it doesn't your powersupply maybe dead.
    Thanks HansH.
    KT4 users  
    Please read the Un-Official KT4 guide if you have CRC errors or strange crashes.
    These can be BIOS problems.
    In any case !!!Only flash if the system is stable!!!
    Set default-settings and FSB100 to make it stable first!!!
    Motherboards making a Siren-sound
    If your board is making the sound of a firetruck, BEEP-BOOP-BEEP-BOOP...
    Check the folowing:
    1. CPU too hot
    2. chassis intrusion was enabled in the BIOS
    3. PSU is below min/max allowable value
    Stutter in audio
    Remove your antivirus software.
    We have heard a few cases where the stuttering was created by badly behaving antivirus software.
    Disable cpu halt command if it's in the BIOS (Thanks Pascal16)
    Windows  
    Windows2000/XP won't run stable, try to disable APIC and install again....
    Not all drivers/devices like the APIC.
    Windows2000/XP won't install USB2.0, install the latest servicepak (SP3 Win2000 or SP1 WinXP).
    Let Windows rediscover the USB ports, they should work now.
    If you have driver or other problems and don't know what to do anymore but Windows does function without crashing, read this: Click here.
    Audio [added by Maesus, 20/2/2003]
    Can't stream AC3 via SPDIF to external DD decoder? try this ac3filter [info provided by Manfred ]
    Lan not working 100MBit
    You could try this patch, seems to work on some boards.
    The download-link is at the bottom of this post.
    I think I have about covered all most commen problems....
    Check those first before you ask us, as it's not fun to type the same over and over again.... :(
    Another good link for trouble shooting is here: Link
    If you have more issues that can solve problems, please write your thing below......
    I will insert your comments in this guide, with credits, offcourse 8)
    !!I will delete any attempt for discussion or problem report below this message.....!!
    Please report back, in another thread, if your problem was solved and how you did it, this will help others a great deal.
    It's only ment to help people as a guide to where the problem can be, start a new thread if this guide didn't solve your problem and you need more help!
    This thread is only for the experts to guide you into a solution :]

    Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
    Given the settings" irq's are a major",part of directing traffic and power? example:
    Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
    Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored:  no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
    I can honestly say my system is error free and running like a dream.
    xp 2500 barton 333
    creative sound 5.1gamers.
    512 mb kingston ram 400 mhz
    boadband either onboard.
    MSI 5700 128 mb ddr
    Setting are:
    163 fsb
    mult of 11
    ddr 333
    video memory clock down to 450mhz
    3d clock to 390mhz
    The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

  • What does this message mean?  "ITunes has fetected an iPad in recovery mode.  You must restore this iPad before it can be used with ITunes".

    What does this message mean?  "itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with ITnes."  How do I restore when every time I connect to my computer I get this message?

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE!

    HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
    YOUR LIFE!
    I found this on a bulletin board and decided to try it. A
    little while back,
    I was browsing through newsgroups, just like you are now, and
    came across an
    article similar to this that said you could make thousands of
    dollars within
    weeks with only an initial investment of $6.00! So I thought,
    Yeah right,
    this must be a scam,but like most of us, I was curious, so I
    kept reading.
    Anyway, it said that you send $1.00 to each of the 6 names
    and address
    stated in the article. You then place your own name and
    address in the
    bottom of the list at #6, and post the article in at least
    200 newsgroups.
    (There are thousands) No catch, that was it. So after
    thinking it over, and
    talking to a few people first, I thought about trying it. I
    figured: what
    have I got to lose except 6
    stamps and $6.00, right? Then I invested the measly $6.00.
    Well GUESS
    WHAT!!...
    within 7 days, I started getting money in the mail! I was
    shocked! I figured
    it would end soon, but the money just kept coming in. In my
    first week, I
    made about $25.00. By the end of the second week I had made a
    total of over
    $1,000.00! In the third week I had over $10,000.00 and it's
    still growing.
    This is now my fourth week and I have made a total of just
    over $42,000.00
    and it's still coming in rapidly. It's certainly worth $6.00,
    and 6 stamps,
    I have spent more than that on the lottery!! Let me tell you
    how this works
    and most importantly, why it works....Also, make sure you
    print a copy of
    this article NOW, so you can get the information off of it as
    you need it. I
    promise you
    that if you follow the directions exactly, that you will
    start making more
    money than you thought possible by doing something so easy!
    Suggestion: Read this entire message carefully! (Print it out
    or download
    it.) Follow the simple directions and watch the money come
    in! It's easy.
    It's legal. And, your investment is only $6.00 (Plus postage)
    IMPORTANT: This is not a rip-off; it is not indecent; it is
    not illegal; and
    it is virtually no risk - it really works!!!! If all of the
    following
    instructions are adhered to, you will receive extraordinary
    dividends.
    PLEASE NOTE: Please follow these directions EXACTLY, and
    $50,000 or more can
    be yours in 20 to 60 days. This program remains successful
    because of the
    honesty and integrity of the participants. Please continue
    its success by
    carefully
    adhering to the instructions. You will now become part of the
    Mail Order
    business. In this business your product is not solid and
    tangible, it's a
    service. You are in the business of developing Mailing Lists.
    Many large
    corporations are happy to pay big bucks for quality lists.
    However, the
    money made from the mailing lists is secondary to the income
    which is made
    from people like you and me asking to be included in that
    list. Here are the
    4 easy steps to success:
    STEP 1: Get 6 separate pieces of paper and write the
    following on each piece
    of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
    $1.00 bills and
    place ONE inside EACH of the 6 pieces of paper so the bill
    will not be seen
    through the envelope (to prevent thievery). Next, place one
    paper in each of
    the 6 envelopes and seal them. You should now have 6 sealed
    envelopes, each
    with a piece of paper stating the above phrase, your name and
    address, and a
    $1.00 bill. What you are doing is creating a service. THIS IS
    ABSOLUTELY
    LEGAL! You are requesting a legitimate service and you are
    paying for it!
    Like most of us I was a little skeptical and a little worried
    about the
    legal aspects of it all. So I checked it out with the U.S.
    Post Office
    (1-800-725-2161) and they
    confirmed that it is indeed legal! Mail the 6 envelopes to
    the following
    addresses:
    Mailing Adresses
    Stephanie Hicks
    1283 Evening Canyon
    Henderson NV 89014
    Ross Wilson
    202 Belmont Dr.
    Thibodaux, LA 70301
    James Small
    4690 Sierra St.
    Riverside, CA 92504
    Thomas G.
    P.O. Box 591939
    Houston, TX 77259
    S. Parker
    159 Main Street
    Dadeville, Alabama 36853
    A. Wyman
    9734 Landowne ct.
    Orlando, FL 32817
    STEP 2: Now take the #1 name off the list that you see above,
    move the other
    names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
    as number 6 on
    the list.
    STEP 3: Change anything you need to, but try to keep this
    article as close
    to
    original as possible. Now, post your amended article to at
    least 200
    newsgroups. (I think there are close to 24,000 groups) All
    you need is 200,
    but remember, the more you post, the more money you make!
    This is perfectly
    legal! If you have any doubts, refer to Title 18 Sec. 1302
    & 1341 of the
    Postal lottery laws. Keep a copy of these steps for yourself
    and, whenever
    you need money, you can use it again, and again.
    PLEASE REMEMBER that this program remains successful because
    of the honesty
    and integrity of the participants and by their carefully
    adhering to the
    directions. Look at it this way. If you are of integrity, the
    program will
    continue and the money that so many others have received will
    come your way.
    NOTE: You may want to retain every name and address sent to
    you, either on a
    computer or hard copy and keep the notes people send you.
    This VERIFIES that
    you are truly providing a service. (Also, it might be a good
    idea to wrap
    the $1 bill in dark paper to reduce the risk of mail theft.)
    So, as each
    post is downloaded and the directions carefully followed, six
    members will
    be reimbursed for their participation as a List Developer
    with one dollar
    each. Your name will move up the list geometrically so that
    when your name
    reaches the #1 position you will be receiving thousands of
    dollars in
    CASH!!! What an opportunity for only $6.00 ($1.00 for each of
    the first six
    people listed above) Send it now, add your own name to the
    list and you're
    in business!
    ---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
    Step 1) You do
    not need to re-type this entire letter to do your own
    posting. Simply put
    your cursor at the beginning of this letter and drag your
    cursor to the
    bottom of this document, and select 'copy' from the edit
    menu. This will
    copy the entire letter into the computer's memory.
    Step 2) Open a blank 'notepad' file and place your cursor at
    the top of the
    blank page. From the 'edit' menu select 'paste'. This will
    paste a copy of
    the letter into notepad so that you can add your name to the
    list.
    Step 3) Save your new notepad file as a .txt file. If you
    want to do your
    postings in different settings, you'll always have this file
    to go back to.
    Step 4) Use Netscape or Internet explorer and try searching
    for various
    newsgroups (on-line forums, message boards, chat sites,
    discussions.) Step
    5) Visit these message boards and post this article as a new
    message by
    highlighting the text of this letter and selecting paste from
    the edit menu.
    Fill in the Subject, this will be the header that everyone
    sees as they
    scroll through the list of postings in a particular group,
    click the post
    message button. You're done with your first one!
    Congratulations...THAT'S
    IT! All you have to do is jump to different newsgroups and
    post away, after
    you get the hang of it, it will take about 30 seconds for
    each newsgroup!
    **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
    YOU WILL MAKE!!
    BUT YOU HAVE TO POST A MINIMUM OF 200**
    That's it! You will begin receiving money from around the
    world within days!
    You may eventually want to rent a P.O.Box due to the large
    amount of mail
    you will receive. If you wish to stay anonymous, you can
    invent a name to
    use, as long as the postman will deliver it.
    **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
    part: Out of
    200 postings, say I receive only 5 replies (a very low
    example). So then I
    made $5.00 with my name at #6 on the letter. Now, each of
    the 5 persons who just sent me $1.00 make the MINIMUM 200
    postings, each
    with my name at #5 and only 5 persons respond to each of the
    original 5,
    that is another $25.00 for me, now those 25 each make 200
    MINIMUM posts with
    my name at #4 and only 5 replies each, I will bring in an
    additional
    $125.00! Now, those 125 persons turn around and post the
    MINIMUM 200 with my
    name at #3 and only receive 5 replies each, I will make an
    additional
    $626.00! OK, now here is the fun part, each of those 625
    persons post a
    MINIMUM 200 letters with my name at #2 and they each only
    receive 5 replies,
    that just made me $3,125.00!!! Those
    3,125 persons will all deliver this message to 200 newsgroups
    with my name
    at #1 and if still 5 persons per 200 newsgroups react I will
    receive
    $15,625,00!With an original investment of only $6.00!
    AMAZING! When your
    name is no longer on the list, you just take the latest
    posting in the
    newsgroups, and send out another $6.00 to names on the list,
    putting your
    name at number 6 again. And start posting again. The thing to
    remember is:
    do you realize that thousands of people all over the world
    are joining the
    internet and reading these articles
    everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
    and see if it
    really works?? I think so... People have said, "e;what if the
    plan is played
    out and no one sends you the money? So what! What are the
    chances of that
    happening when there are tons of new honest users and new
    honest people who
    are joining the internet and newsgroups everyday and are
    willing to give it
    a try?
    Estimates are at 20,000 to 50,000 new users, every day, with
    thousands of
    those joining the actual internet.
    Remember: play FAIRLY and HONESTLY and this will really work.

    HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
    YOUR LIFE!
    I found this on a bulletin board and decided to try it. A
    little while back,
    I was browsing through newsgroups, just like you are now, and
    came across an
    article similar to this that said you could make thousands of
    dollars within
    weeks with only an initial investment of $6.00! So I thought,
    Yeah right,
    this must be a scam,but like most of us, I was curious, so I
    kept reading.
    Anyway, it said that you send $1.00 to each of the 6 names
    and address
    stated in the article. You then place your own name and
    address in the
    bottom of the list at #6, and post the article in at least
    200 newsgroups.
    (There are thousands) No catch, that was it. So after
    thinking it over, and
    talking to a few people first, I thought about trying it. I
    figured: what
    have I got to lose except 6
    stamps and $6.00, right? Then I invested the measly $6.00.
    Well GUESS
    WHAT!!...
    within 7 days, I started getting money in the mail! I was
    shocked! I figured
    it would end soon, but the money just kept coming in. In my
    first week, I
    made about $25.00. By the end of the second week I had made a
    total of over
    $1,000.00! In the third week I had over $10,000.00 and it's
    still growing.
    This is now my fourth week and I have made a total of just
    over $42,000.00
    and it's still coming in rapidly. It's certainly worth $6.00,
    and 6 stamps,
    I have spent more than that on the lottery!! Let me tell you
    how this works
    and most importantly, why it works....Also, make sure you
    print a copy of
    this article NOW, so you can get the information off of it as
    you need it. I
    promise you
    that if you follow the directions exactly, that you will
    start making more
    money than you thought possible by doing something so easy!
    Suggestion: Read this entire message carefully! (Print it out
    or download
    it.) Follow the simple directions and watch the money come
    in! It's easy.
    It's legal. And, your investment is only $6.00 (Plus postage)
    IMPORTANT: This is not a rip-off; it is not indecent; it is
    not illegal; and
    it is virtually no risk - it really works!!!! If all of the
    following
    instructions are adhered to, you will receive extraordinary
    dividends.
    PLEASE NOTE: Please follow these directions EXACTLY, and
    $50,000 or more can
    be yours in 20 to 60 days. This program remains successful
    because of the
    honesty and integrity of the participants. Please continue
    its success by
    carefully
    adhering to the instructions. You will now become part of the
    Mail Order
    business. In this business your product is not solid and
    tangible, it's a
    service. You are in the business of developing Mailing Lists.
    Many large
    corporations are happy to pay big bucks for quality lists.
    However, the
    money made from the mailing lists is secondary to the income
    which is made
    from people like you and me asking to be included in that
    list. Here are the
    4 easy steps to success:
    STEP 1: Get 6 separate pieces of paper and write the
    following on each piece
    of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
    $1.00 bills and
    place ONE inside EACH of the 6 pieces of paper so the bill
    will not be seen
    through the envelope (to prevent thievery). Next, place one
    paper in each of
    the 6 envelopes and seal them. You should now have 6 sealed
    envelopes, each
    with a piece of paper stating the above phrase, your name and
    address, and a
    $1.00 bill. What you are doing is creating a service. THIS IS
    ABSOLUTELY
    LEGAL! You are requesting a legitimate service and you are
    paying for it!
    Like most of us I was a little skeptical and a little worried
    about the
    legal aspects of it all. So I checked it out with the U.S.
    Post Office
    (1-800-725-2161) and they
    confirmed that it is indeed legal! Mail the 6 envelopes to
    the following
    addresses:
    Mailing Adresses
    Stephanie Hicks
    1283 Evening Canyon
    Henderson NV 89014
    Ross Wilson
    202 Belmont Dr.
    Thibodaux, LA 70301
    James Small
    4690 Sierra St.
    Riverside, CA 92504
    Thomas G.
    P.O. Box 591939
    Houston, TX 77259
    S. Parker
    159 Main Street
    Dadeville, Alabama 36853
    A. Wyman
    9734 Landowne ct.
    Orlando, FL 32817
    STEP 2: Now take the #1 name off the list that you see above,
    move the other
    names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
    as number 6 on
    the list.
    STEP 3: Change anything you need to, but try to keep this
    article as close
    to
    original as possible. Now, post your amended article to at
    least 200
    newsgroups. (I think there are close to 24,000 groups) All
    you need is 200,
    but remember, the more you post, the more money you make!
    This is perfectly
    legal! If you have any doubts, refer to Title 18 Sec. 1302
    & 1341 of the
    Postal lottery laws. Keep a copy of these steps for yourself
    and, whenever
    you need money, you can use it again, and again.
    PLEASE REMEMBER that this program remains successful because
    of the honesty
    and integrity of the participants and by their carefully
    adhering to the
    directions. Look at it this way. If you are of integrity, the
    program will
    continue and the money that so many others have received will
    come your way.
    NOTE: You may want to retain every name and address sent to
    you, either on a
    computer or hard copy and keep the notes people send you.
    This VERIFIES that
    you are truly providing a service. (Also, it might be a good
    idea to wrap
    the $1 bill in dark paper to reduce the risk of mail theft.)
    So, as each
    post is downloaded and the directions carefully followed, six
    members will
    be reimbursed for their participation as a List Developer
    with one dollar
    each. Your name will move up the list geometrically so that
    when your name
    reaches the #1 position you will be receiving thousands of
    dollars in
    CASH!!! What an opportunity for only $6.00 ($1.00 for each of
    the first six
    people listed above) Send it now, add your own name to the
    list and you're
    in business!
    ---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
    Step 1) You do
    not need to re-type this entire letter to do your own
    posting. Simply put
    your cursor at the beginning of this letter and drag your
    cursor to the
    bottom of this document, and select 'copy' from the edit
    menu. This will
    copy the entire letter into the computer's memory.
    Step 2) Open a blank 'notepad' file and place your cursor at
    the top of the
    blank page. From the 'edit' menu select 'paste'. This will
    paste a copy of
    the letter into notepad so that you can add your name to the
    list.
    Step 3) Save your new notepad file as a .txt file. If you
    want to do your
    postings in different settings, you'll always have this file
    to go back to.
    Step 4) Use Netscape or Internet explorer and try searching
    for various
    newsgroups (on-line forums, message boards, chat sites,
    discussions.) Step
    5) Visit these message boards and post this article as a new
    message by
    highlighting the text of this letter and selecting paste from
    the edit menu.
    Fill in the Subject, this will be the header that everyone
    sees as they
    scroll through the list of postings in a particular group,
    click the post
    message button. You're done with your first one!
    Congratulations...THAT'S
    IT! All you have to do is jump to different newsgroups and
    post away, after
    you get the hang of it, it will take about 30 seconds for
    each newsgroup!
    **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
    YOU WILL MAKE!!
    BUT YOU HAVE TO POST A MINIMUM OF 200**
    That's it! You will begin receiving money from around the
    world within days!
    You may eventually want to rent a P.O.Box due to the large
    amount of mail
    you will receive. If you wish to stay anonymous, you can
    invent a name to
    use, as long as the postman will deliver it.
    **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
    part: Out of
    200 postings, say I receive only 5 replies (a very low
    example). So then I
    made $5.00 with my name at #6 on the letter. Now, each of
    the 5 persons who just sent me $1.00 make the MINIMUM 200
    postings, each
    with my name at #5 and only 5 persons respond to each of the
    original 5,
    that is another $25.00 for me, now those 25 each make 200
    MINIMUM posts with
    my name at #4 and only 5 replies each, I will bring in an
    additional
    $125.00! Now, those 125 persons turn around and post the
    MINIMUM 200 with my
    name at #3 and only receive 5 replies each, I will make an
    additional
    $626.00! OK, now here is the fun part, each of those 625
    persons post a
    MINIMUM 200 letters with my name at #2 and they each only
    receive 5 replies,
    that just made me $3,125.00!!! Those
    3,125 persons will all deliver this message to 200 newsgroups
    with my name
    at #1 and if still 5 persons per 200 newsgroups react I will
    receive
    $15,625,00!With an original investment of only $6.00!
    AMAZING! When your
    name is no longer on the list, you just take the latest
    posting in the
    newsgroups, and send out another $6.00 to names on the list,
    putting your
    name at number 6 again. And start posting again. The thing to
    remember is:
    do you realize that thousands of people all over the world
    are joining the
    internet and reading these articles
    everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
    and see if it
    really works?? I think so... People have said, "e;what if the
    plan is played
    out and no one sends you the money? So what! What are the
    chances of that
    happening when there are tons of new honest users and new
    honest people who
    are joining the internet and newsgroups everyday and are
    willing to give it
    a try?
    Estimates are at 20,000 to 50,000 new users, every day, with
    thousands of
    those joining the actual internet.
    Remember: play FAIRLY and HONESTLY and this will really work.

Maybe you are looking for

  • New iTunes Update: Won't Open; Crashes

    iTunes takes an hour to open after clicking on  the icon, then it plays two songs before crashing after the latest update. Is there a fix?

  • .chm on Windows Server 2008 hangs on a hyperlink to an embedded .xls file

    This link has not caused problems on Windows XP, Windows 7, and Windows Server 2003. On Windows Server 2008, if a user attempts to go to the link he gets the option to open or save the file. Either option causes an "application crash". The .xls is ac

  • 5800 xpress music messaging has gone very slow aft...

    Dear Friends, I have recently updated by 5800 xpress music OS and since then the messaging has gone very slow. it takes lot of time in loading the SMS editor and lot of time in sending a msg. can some body please give me some solution to improve the

  • Jackaroo need some help

    hello,I use solaris8 as a rookie,and I meet a lot of questions, 1 I must change the LANG to C before I can use admintool,why default profile is set like this ? 2 I always add a user with admintool ,but ,I can't write the passwd file.why? 3 I can't do

  • False sharing identification

    I have a basic idea about false sharing and how to write a java program to avoid it. Now I am interested in looking at the Studio analyzer's view of false sharing as shown in pages 34-36 in http://cscads.rice.edu/workshops/summer09/slides/performance