Kann W530 SLAT (Second Level Address Translation) ?
Hallo,
Unterstützt der im W 530 verbaute Prozessor SLAT (Second Level Address Translation)?
Danke
Rainer Borchmann
CEO smarttechnics
The W530 supports SLAT and will run Hyper-V.
Similar Messages
-
Bios 68dva ver f. 03. How to enable SLAT (Second Level Address Translation)
Hi all. i need help.
I'm a student and I need to write a thesis on the topic "programming on a mobile phone," I chose the product mitsrosoft sdk8 background. However, for normal debug need to run SLAT (Second Level Address Translation)
which is supported by my CPU, but it is off, and it should be included in the bios, but I can not naiti where it is included, help please!
i can not find
NP (Nested Page Tables), RVI (Rapid Virtualization Indexing), SVM (AMD support for hardware-assisted virtualization)
PS: Google translation.msdn link
http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj863509(v=vs.105).aspx -
Tree View Second level is not displaying bind parameter
Studio Edition Version 11.1.2.2.0appears this problem is addressed in
http://dailydevfixes.blogspot.com/2011/07/setting-bind-parameters-on-hierarchy-of.html
unfortunately I must be missing something.
as a test using the hr schema
I was doing a tree view with hire date as the first level then the employee id, last name and first name as the second level.
I hard coded employee id of 187 on a bean called by a button.
the first level is updated unfortunately the second level is not (employee id 107 should not show up)
--1999-02-07
----- 187 Cabrio Anthony
----- 107 Lorentz Dianahere is my bean the first level is updated but the second level is not not quite sure what I am missing
public void ButtonClick(ActionEvent actionEvent) {
BindingContext bindingctx = BindingContext.getCurrent();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("ParentVO1Iterator");
ViewObject Parentvo =dciter.getViewObject();
Parentvo.setNamedWhereClauseParam("empid",187);
Parentvo.executeQuery();
AttributeDef attrDef = Parentvo.findAttributeDef("ChildVO");
ViewObject childvo = attrDef.getAccessorVO(Parentvo);
childvo.setNamedWhereClauseParam("empid",187);
childvo.executeQuery();
AdfFacesContext adfFCtx = AdfFacesContext.getCurrentInstance();
adfFCtx.addPartialTarget(treeupdate);
}here is the query for the parent view object.
select trunc(hire_date) hire_dt
from employees
where :empid is null or employee_id = :empid
group by trunc(hire_date)here is the query for the child view object
select trunc(hire_date) hire_dt, employee_id, employee_id||' '||last_name||' '||first_name nm
from employees
where :empid is null or employee_id = :empid
order by trunc(hire_date)here is the view link
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewLink SYSTEM "jbo_03_01.dtd">
<!---->
<ViewLink
xmlns="http://xmlns.oracle.com/bc4j"
Name="ParentToChildViewLink"
Version="11.1.2.61.83">
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="model.view.link.ParentToChildViewLink_LABEL"/>
</SchemaBasedProperties>
</Properties>
<ViewLinkDefEnd
Name="ParentVO"
Cardinality="1"
Source="true"
Owner="model.view.ParentVO">
<DesignTime>
<Attr Name="_accessor" Value="true"/>
<Attr Name="_finderName" Value="ParentVO"/>
<Attr Name="_isUpdateable" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item Value="model.view.ParentVO.HireDt"/>
</AttrArray>
</ViewLinkDefEnd>
<ViewLinkDefEnd
Name="ChildVO"
Cardinality="-1"
Owner="model.view.ChildVO">
<DesignTime>
<Attr Name="_finderName" Value="ChildVO"/>
<Attr Name="_isUpdateable" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item Value="model.view.ChildVO.HireDt"/>
</AttrArray>
</ViewLinkDefEnd>
<ResourceBundle>
<PropertiesBundle
PropertiesFile="model.ModelBundle"/>
</ResourceBundle>
</ViewLink>and here is the tree
<af:tree value="#{bindings.ParentVO1.treeModel}" var="node"
selectionListener="#{bindings.ParentVO1.treeModel.makeCurrent}" rowSelection="single"
id="t1" binding="#{myBean.treeupdate}">
<f:facet name="nodeStamp">
<af:outputText value="#{node}" id="ot1"/>
</f:facet>
</af:tree>thanks I am working through that example unfortunately I ran into a problem
previously (in my real application) I was using bind parameters and my query had the following where clause.
( I did this to turn a comma separated list into an in statement)
WHERE :Bind_Batch_NM_Comma_Sep_List IS NULL
OR batch_nm IN
( SELECT REGEXP_SUBSTR (:Bind_Batch_NM_Comma_Sep_List,
'[^,]+',
1,
LEVEL)
batch_nm
FROM DUAL
CONNECT BY LEVEL <=
REGEXP_COUNT (:Bind_Batch_NM_Comma_Sep_List,
+ 1)however in the example presented you are to create view criteria and there is a panel on the right called view object where clause but I can not figure out how to type into it directly
and I find it unlikely I can recreate this where clause using the add item button.
is there a way to manually type the where clause in the view object where clause box? -
How to change security questions after adding a second email address?
I'm at a loss and really really frustrated with Apple for the first time in my life.
I've added a second email address and tried over the last 3 days on my iPad and Mac to change my security questions. There is no option present that I can see that allows you to do this without first entering the answers. (to which I don't know anymore)
I called Apple support (even in english) and every time the call has been dropped.
In all the years since switching to Apple I've always been impressed with the level of customer service. This is the first time that I've felt this level of sincere frustration.
I'm not sure why I have to book a time to speak with someone. Updating or changing security questions, should be a process one can do over the internet. I'm confused either way why questions are necessary if the apple password entered was correct. It's not my bank account; why the need for such extreme security just to download an app paid for by an iTunes card!
Any help or direction would be appreciated!!
Thank you
KateHello there, Kate.
Apologies for your frustration. For your security the existing questions need to be answered before new ones can be created. The following Knowledge Base article provides some additional steps to try if you are unsure of the answers to the existing ones:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Specifically:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Tuxedo and Network Address Translation(NAT) at Firewall
We made a sucessful connection through the firewall without Network Address Translation
(NAT)on the firewall, from one network to the other and what we found happened
was that the client machine makes a connection on port 8090 and then sets up a
successful connection to the server (WSL).The client then very soon afterward
makes another connection on
another high-port and everything works (WSH connection).
Whats not happening with NAT is that the second connection is not being made to
the firewall. The firewall and the router are not blocking the call. It is just
not being made.
Thanking you in advance!!!
NathanielNathaniel,
Take a look at the WSL -H option at
http://edocs.bea.com/tuxedo/tux80/atmi/rf540.htm#1534543
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Nathaniel Sebolai wrote:
We made a sucessful connection through the firewall without Network Address Translation
(NAT)on the firewall, from one network to the other and what we found happened
was that the client machine makes a connection on port 8090 and then sets up a
successful connection to the server (WSL).The client then very soon afterward
makes another connection on
another high-port and everything works (WSH connection).
Whats not happening with NAT is that the second connection is not being made to
the firewall. The firewall and the router are not blocking the call. It is just
not being made.
Thanking you in advance!!!
Nathaniel -
Wie kann ich meine cloud Mail addresse ändern? Ich habe mich beim einrichten verschrieben!
Wie kann ich meine cloud Mail addresse ändern? Ich habe mich beim einrichten verschrieben!
Sie müssen sich öffnen Systemeinstellungen> Sprache & Text. Starten Sie, indem Sie Deutch an die Spitze der Liste. Bow abmelden und wieder einschalten. Dialoge und Menüs sollten jetzt in deutscher Sprache. Gehen Sie zurück zu Systemeinstellungen> Sprache & Text und stellen Sie sicher, die anderen Einstellungen sind ebenfalls geeignet.
Übersetzung wurde von Google Translate getan. Ich hoffe, es funktioniert.
Dan -
Problem with open in new window for second level tab
Hi Friends,
I am using 2 level tabs in my application. In my second level tab when i right click and select *open in new
window* it is giving Page not found error. But for the first level tabs it is working correctly. How can i fix this so
that either i can show the page when right click the tab and select open in new window or disable the right clicking
for the second level tabs. Please help,
Thanks
JeevHi,
I don't think its exactly possible, as tabs use javascript:doSubmit('somevalue'); and you can not open javascript in a new window, as javascript usually references the current page you are on, and since you open the javascript in a new window, it doesn't know what to reference. The most helpful thread I found was : Re: Open other tab in a new window (ATD reply, third from the bottom).
Ta,
Trent
Edited by: tr3nton on Dec 3, 2009 4:19 PM; Hari beat me to linking to the correct thread, my bad. -
Linked report from second level drill-down level
Hi,
I have a report with two drill-down levels, Dept Id and Job Id.
The requirement is when I am on Job Id drill level; I have to call another report when I click on any of the Job Id. This Job Id is passed to another report and the report is filtered based on that Job Id.
I created a hyperlink on Job Id drill down level successfully. But the problem is I am unable to go to the first level i.e Dept Id. Actually the hyperlink is displayed and the up arrow is not visible to go to the first level.
Is there any way where after creating a link on second level and opening the report in a new window, the drill up functionality can be maintained?
I am using Business Objects XI 3.1 version.
Thank you.hi
there is another way to drill down the report of web intelligence.for that we have to customize in the universe level create a folder in custom hierarchy and add your two objects to that folder, i.e empid. and deptid. the order of these objects should be in the way the drilling happens that means if you want to drill down from empid. to deptid. then empid. should be the first object of the folder,save and export the universe to the CMS.Then it ready to use for webi report.Build the query for the report and enable the drill option in the report.Now the report is ready for your requirement.
thanks & regards
Sreekanth K -
I have an exisitng email address but I need to create a more professional sounding email address for work. I can't figure out how to do this. I'm using OS X 10.8.4
Thanks!If you mean you want to add a second email address to the Mac Mail app:
Open Mail > Preferences > Accounts > Click the plus sign and enter the information
If you mean you want to add an alias to your iCloud mail account:
Go to https://www.icloud.com > sign in > Mail > Click the Gear on top right > Preferences > Accounts > Add an Alias (on bottom left) -
On UPnP and NAT (Network Address Translation)
Why UPnP is an often asked Question.
This article goes a long way to say why.
A couple of Quotes
*What is UPnP?*
Universal Plug and Play (UPnP) is an architecture for pervasive peer-to-peer network connectivity of PCs and intelligent devices or appliances, particularly within the home. UPnP builds on Internet standards and technologies, such as TCP/IP, HTTP, and XML, to enable these devices to automatically connect with one another and work together to make networking - particularly home networking - possible for more people.
*Are there other ways to solve the problem of NAT traversal? If so, why is using UPnP the best choice?*
Yes, there are other ways to solve this problem, but no other mechanism currently exists as an industry standard to address this problem in an automatic way for the consumer and in such a universally-applicable way for the developer.
Simply Automated Starter Package
Other approaches require either manual intervention by the user or they require special development efforts by the Internet gateway device vendor and the software developer to handle the NAT traversal needs of specific applications. As a result, UPnP is uniquely able to solve this important problem.
*Consumer does the work.* The manual intervention methods of NAT traversal require a consumer to use a browser, a graphical user interface-based tool on the PC, or a command line interface tool on the PC to change some settings on the Internet gateway device in the home. While some technical enthusiast users have little difficulty with this, many consumers do not feel comfortable doing this. Further, many consumers may not even realize that NAT traversal problems are interfering with their use of services across the Internet. _The user may be attempting to play a multi-player game or engage in some other peer-to-peer service but find he or she cannot connect for some reason._ This leads to troubleshooting, support calls, customer dissatisfaction, and reluctance on the part of the user to try new services or experiences in the future.
*Developer does the work.* To avoid requiring the consumer to solve this NAT traversal problem manually, some Internet gateway device vendors have written and included application layer gateway support into their devices. This application layer gateway software is designed with specific applications in mind. In other words, the device vendor writes and tests specific code that will automatically enable one application to go through the NAT. If the application software is updated, the application layer code the device vendor wrote may have to be updated and tested again. This one-at-a-time way of chasing the NAT traversal problem is manageable for device vendors when there are only a few peer-to-peer or relevant applications to consider, but this approach does not scale well to 100s or 1000s of applications, can be very expensive to pursue, and likely requires specific knowledge of how each of these applications function. The better way to approach this problem is to have the device vendor add software or firmware to their device once to understand UPnP and have other devices and software be able to communicate with the NAT device using this same technology. UPnP is uniquely able to fulfill this role today.
I have underlined a passage in the last.
I hope this helps in some way.
6:58 PM Tuesday; January 1, 2008Look for bindAddr in the weblogic.properties doc.
weblogic.system.bindAddr
You can use a dns name instead of an ip address
Mike
David Chen <[email protected]> wrote:
>We are planning to add a client that needs to access our weblogic cluster
>through firewalls with IP address translation. According to the WebLogic
>(5.1) documentation, this could be done by opening port 7001 in the
>firewalls, and BIND WebLogic SERVER INSTANCES TO DNS NAMES. Does anyone
>know how to bind WebLogic server instances to DNS names? Should it be
>done in weblogic.properties?Thanks in advance,David [email protected]
-
Can i add a second email address to adobe digital edition account
can i add a second email address to adobe digital editions?
If you mean you want to add a second email address to the Mac Mail app:
Open Mail > Preferences > Accounts > Click the plus sign and enter the information
If you mean you want to add an alias to your iCloud mail account:
Go to https://www.icloud.com > sign in > Mail > Click the Gear on top right > Preferences > Accounts > Add an Alias (on bottom left) -
How do I add a second email address in my email account with Shaw cable
How do I add a second email address in my email account with Shaw cable. It is already set up with Shaw but how do I add it to my incoming email
If you are using Apple's Mail setup is: Mail>Preferences>Accounts tab, click the + sign to add an account. You'll need the email account name and password to input on the first screen. Mail should then attempt auto-setup but if it can't do it you'll need to manually add the mail server info, etc.
-
I have an email account and they want me to use my (same) email account name as my Apple ID. When I do it says my email is already in use. Is Apply suggesting I need to create a second email address?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Is the email address being used in the account of another Apple ID that you have? -
How to cancel a second email address
I added a second email address needing it for a short time and i did not secure it with spam protection. I need to cancel it as i only get junk on it and have no need for it at this time
Please see http://homepage.mac.com/rfwilmut/notes/mobileme.html#alias
-
Problems with Second level drop downs
Hi, I'm having problems with the second level of my drop down
menu. It's showing up when you hit the first level. Any ideas what
I'm doing wrong?
http://www.graphicvisionsinc.com/test/Solved it!
For info, updating from FCS 1.1 to FCS 1.1.1 solved this problem!
Maybe you are looking for
-
Hi Guru's Here we r facing problem while doing output in sales order I configured everything but we came to know from our abaper that there is one function module is missing That is RV_Message_functional module something Could u please light on it Th
-
Can anyone tell me how I can save a password again after "never remind this password" was pressed accidentally
-
Hai, Where the Abap Routines are used in BW side? How many routines are there in bW? Can any send me the Doc's on this to my mail id [email protected] full points assured. thanks n Regards prashanth k
-
Help please! I had to reformat my early 2008 MacBook and have now lost my pre-installed Pages/Keynote/Numbers. I tried to repurchase only my OS is incompatible and Mountain Lion OS will not run on my MacBook. Really annoyed as MacBook is in good cond
-
Can't set up apple ID iPod due to "age limit"
I was trying so set up another apple ID on my device for iCloud, etc. when I did this I by accident entered the wrong year on my birthdate. Now it won't let me set up the ID at all saying that I am too young...even once I corrected the birth date!