KDE Konfusion: 1 panel needed to be recreated; toolbox non-responsive
I've been using Arch for about 2 minutes and KDE for about 2 seconds.
I should say that I'm not confident I understand KDE's terminology yet and the more I read, the more confused I get. I'm somewhat frustrated by KDE's built-in help because it seems only to explain the easy things and never the difficult or detailed ones!
So I configured my desktop (I think it is a desktop - or is it a "containment" or "plasmoid"?) as follows:
- 1 panel at top left of screen containing three different launchers (menu, kickoff, lancelot) so I can try them out, knowledge base widget, various application launchers
- 1 panel at top on right of screen just to left of the desktop toolbox (not sure this is the word - it has a cashew and sometimes the word "desktop" and cannot be moved or altered as far as I can tell) containing other widgets including the system tray, notifications, monitors, clock, navigational stuff (activities, dashboard, show desktop, pager) etc.
This seemed to work fine until I started up today. The right panel continued to work fine. The left panel responded only to right-clicks. Left-clicking on the leftmost widget changed virtual desktop. Left-clicking on others either did nothing or also changed to the same virtual desktop. The desktop toolbox was entirely unresponsive initially although it now seems to also take me back to the same virtual desktop if I click on it.
Rebooting did not help.
I removed the left panel, added it again and reconfigured it. That now seems to be working - at least for now.
The desktop toolbox remains unresponsive and I cannot, as far as I know, remove and replace this. I have tried various somewhat random configuration changes but nothing seems to have any effect whatsoever. Right now, left-click on the cashew takes me to the same virtual desktop. Right-click is just like right-click anywhere else on the desktop.
One thing I've noticed is that the word "desktop" no longer shows up all the time. Also it no longer looks as 3d as it did before. It used to be slightly deeper than my configured panels but now it looks more like just another very small mini panel (which doesn't do much).
When I shutdown last night, plasma crashed. This seems to occur more frequently than I like (ever since I installed Arch - before I'd made anything really by way of changes to KDE). Every time, it takes me through a process of requesting and gathering bug info and then announces that there's not enough so it isn't worth sending a report to the developers. I don't know if this latest crash is connected to what I'm seeing or not.
I am not sure what the difference between the "Desktop" and "Desktop Icons" activities are but "Desktop" seems to be the default one and I think I'm just staying in that activity. (I did try switching just to see if it made any difference but it didn't help.) I mention this only because I'm not really clear what activities are and so I'm not sure whether it might be important or not.
I realise this sounds very confused. That's the result of spending the entire day trying to figure out what is going on with man pages (are there such things for KDE?), help centre, google, arch's forum/wiki search and random trial-and-error. I mention this only because I suspect it will look as though I haven't bothered trying to find the answer which I'm sure must be obvious really. (I'm sure there was a simpler way of rejuvenating my left panel than removing it and making another, as well!)
Any pointer would be extremely welcome.
Thanks. ihatethecashew sounds great. RIght now, KDE has randomly decided to not let me install further widgets so although it is built I cannot use it. But I expect it will randomly decide otherwise at some point.
On reboot today, my left panel was again not usable. So I decided to remove it again and add everything to the right panel. Maybe having more than one is a problem?
I appreciate the link, too. I think I've found parts of that site when googling for things but not the introductory page which you linked to.
Also, just after I installed ihatethecashew, the toolbox cashew randomly responded again although it has now refrozen.
I'm pretty sure there's some logic to this - I just haven't a clue what it is yet!
Similar Messages
-
4620 all in one control panel non responsive
4620 all in one printer front control panel buttons non-responsive. The panel shows information but nothing happens when pushing buttons. So I can not copy, etc. I can print from the computer which is directly hooked up. The wireless light is on even though I don't use it. I have tried unplugging with no luck.
Hey , Welcome to the HP Support Forums!
I understand that the control panel display on your HP Officejet 4620 e-All-in-One Printer is unresponsive. I would like to assist you today with resolving this issue. There is the chance that either a power issue or Firmware Programming issue is occuring within your product. Therefore, to start troubleshooting I am going to have you perform some standard hardware troubleshooting steps. Please follow the steps below. Step 1: Check Power: Please plug your printer directly into a wall outlet for power. Power strips and surge protectors may cause your printer to lack power and not respond properly. Once your printer is plugged directly into a wall outlet please power it on. Next, please test the control panel buttons and Copy function to confirm that the issue is resolved. Should the issue persist, please proceed to the next step. Step 2: Perform a Power Reset: Turn your printer ONWith the printer ON please disconnect the power cable from the rear of your printerLeave the power cable disconnected for 60 secondsAfter 60 seconds plug the power cable back inYour printer should start back up on its ownOnce your printer returns to the Ready state please test the control panel buttons and Copy function to confirm if the issue has been resolved. Should the issue persist please proceed. Step 3: Update Firmware: The Firmware is the internal Programming within your printer. Essentially, it is the 'brains' of your printer and controls what your printer does and how your printer does it. If the internal Firmware Programming is corrupted, it may cause performance issues within your printer. Therefore, I would like you to run the latest Firmware Update for your printer. However, before I am able to provide you with the correct Firmware Update to run I do need to know what Operating System you're using on your computer. Once I find out what Operating System you're using I will provide the latest Firmware Update for you to download and 'send' to your printer. Please respond to this post with the result of your troubleshooting. Should the issue persist, be sure to include your Operating System in your response. I look forward to hearing from you. Good luck! -
Can the Genius Bar cable my 5S to their computer or separate keyboard to enter my passcode on a broken, non-responsive touchscreen? I need to get past the passcode to either transfer my data and pics to a new 5S or my PC computer (that the 5S has never been synced with.
Are you serious... only bluetooth keyboards? Even if the keyboard has the lightning connector? This supposedly works on the iPhone: http://store.griffintechnology.com/wired-keyboard-for-ios-devices
as well as this: http://www.att.com/accessories/specialty-items/logitech-apple-30-pin-wired-keybo ard.html -
I have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option noneI have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option none I've checked.
Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend. -
WM/Menu/Panel - Need Help/Suggestions
At the moment, I'm running KDE 3.5... with OpenBox3 as the window manager. I like the KDE apps, and the OpenBox look and feel. I really, really like Xfce4's panel and right click on desktop menu, and was wondering if it is possible to give up the DE and just have OpenBox with Xfce4's menu and panel. I could still use the KDE apps but I would not use the DE. I do not like the OpenBox menu, even if it is xml/standard. I know the panel is possible, but not so sure about the menu. I don't want to have to download all of Xfce4 though. I don't need Terminal or Thunar or that stuff.
If anyone has any ideas or suggestions I'd appreciate it.
Thanks,
ZackIf you want to run XFCE and just substitute Openbox as the window manager, you can look here:
http://icculus.org/openbox/index.php/Help:XFCE/Openbox
It's also possible to run Openbox, and then launch the XFCE panel on top of it (xfce4-panel).
I'll also second that the XFCE apps (Thunar and their terminal program) are quite light and fast. If you don't want them, they shouldn't get in the way.
Chris
Sjoden wrote:At the moment, I'm running KDE 3.5... with OpenBox3 as the window manager. I like the KDE apps, and the OpenBox look and feel. I really, really like Xfce4's panel and right click on desktop menu, and was wondering if it is possible to give up the DE and just have OpenBox with Xfce4's menu and panel. I could still use the KDE apps but I would not use the DE. I do not like the OpenBox menu, even if it is xml/standard. I know the panel is possible, but not so sure about the menu. I don't want to have to download all of Xfce4 though. I don't need Terminal or Thunar or that stuff. -
[SOLVED] Unable to open some programs in KDE, HFS+ partiton needs fsck
I've had two unsettling experiences today; I'm not sure if they're related or not.
I have a Mid-2012 MacBook Pro. I installed bluez + bluez-utils 5.13.1-1 in order to use an Apple Wireless Keyboard and Magic Trackpad. Following the instructions in the wiki for setting up bluetooth devices using bluetoothctl, I was able to connect to the keyboard without a hitch. However, when I connected the trackpad, I would be able to move the mouse for a few seconds and then the whole system would freeze and I would have to force reboot. I tried this a few a times. I couldn't find any errors in the logs or dmesg; the last entry in dmesg would always show the trackpad being connected, so it seemed like whatever happened after that wasn't being logged. I found a couple recent bug reports, one for Arch and one for Fedora, with similar issues.
I ran pacman -Syu in case my problem was due to outdated drivers or something, but it didn't get fixed. It's possible that the problems I've having now were caused by the update and have nothing to do with the trackpad, but I don't know.
Here's what was upgraded:
[2014-01-08 17:33] [PACMAN] starting full system upgrade
[2014-01-08 17:34] [PACMAN] upgraded glibc (2.18-11 -> 2.18-12)
[2014-01-08 17:34] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2014-01-08 17:34] [PACMAN] upgraded kdebase-workspace (4.11.4-2 -> 4.11.5-1)
[2014-01-08 17:34] [PACMAN] upgraded lib32-glibc (2.18-11 -> 2.18-12)
[2014-01-08 17:34] [PACMAN] upgraded libdrm (2.4.50-1 -> 2.4.51-1)
[2014-01-08 17:34] [PACMAN] upgraded lib32-libdrm (2.4.50-1 -> 2.4.51-1)
[2014-01-08 17:34] [PACMAN] upgraded lib32-nvidia-304xx-utils (304.117-1 -> 304.117-3)
[2014-01-08 17:34] [PACMAN] upgraded lib32-pcre (8.33-1 -> 8.34-1)
[2014-01-08 17:34] [PACMAN] upgraded libcap (2.23-2 -> 2.24-1)
[2014-01-08 17:34] [PACMAN] upgraded librsvg (1:2.40.1-1 -> 1:2.40.1-3)
[2014-01-08 17:34] [PACMAN] upgraded libxfont (1.4.6-1 -> 1.4.7-1)
[2014-01-08 17:34] [PACMAN] upgraded mesa (10.0.1-1 -> 10.0.1-2)
[2014-01-08 17:34] [PACMAN] upgraded openssl (1.0.1.e-5 -> 1.0.1.f-1)
[2014-01-08 17:34] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-01-08 17:34] [PACMAN] upgraded pacman-mirrorlist (20130830-1 -> 20140107-1)
[2014-01-08 17:34] [PACMAN] upgraded xorg-server-common (1.14.5-1 -> 1.14.5-2)
[2014-01-08 17:34] [PACMAN] upgraded xorg-server (1.14.5-1 -> 1.14.5-2)
[2014-01-08 17:34] [PACMAN] upgraded xorg-server-devel (1.14.5-1 -> 1.14.5-2)
In any case, now I can't open some programs; Skype and Okular both spend a while trying to open and then close again before anything happens. I also can't open the KDE application menu, although I can still launch programs with the quick launcher.
Also, I have a non-journaled HFS partition that I use to store media and has been working fine, but now I can't write to it. In dmesg there's an entry from hfsplus saying "Filesystem wasn't unmounted cleanly, mounting it as read-only" and suggesting I run fsck.hfsplus, which doesn't seem to exist. I assume this message refers to my media partition. I tried doing a systemctl short health test which checked out fine, but I don't know that that really has much meaning here. I do have a backup of it if anything risky or drastic needs to be done.
I'm generally new to Linux and not quite sure how to go about troubleshooting all this. I'd love some places to look, stuff to try, etc. Maybe I should try downgrading X server? I see some potentially weird stuff in my logs but nothing that looks like a smoking gun to me. However, I might just not know enough at this point to be able to recognize it.
dmesg:
There're a few firmware bugs and a segfault in konsole (see 0.047701, 0.257523, 12.077596, 27.185098).
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008cd12fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008cd53000-0x000000008cd68fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cece000-0x000000008cefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cf91fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cf92000-0x000000008cffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016f5fffff] usable
[ 0.000000] e820: update [mem 0x8970c190-0x89721dcf] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000008970c18f] usable
[ 0.000000] reserve setup_data: [mem 0x000000008970c190-0x0000000089721dcf] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089721dd0-0x000000008cd12fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008cd53000-0x000000008cd68fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cece000-0x000000008cefefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008ceff000-0x000000008cf91fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cf92000-0x000000008cffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008d000000-0x000000008f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x8cd8e000 ACPI 2.0=0x8cd8e014 SMBIOS=0x8cd1b000
[ 0.000000] efi: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008e000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008e000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=2, attr=0x80000000000000f, range=[0x0000000000090000-0x000000000009a000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0x80000000000000f, range=[0x000000000009a000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f54000) (15MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001f54000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcd7000) (1020MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcd7000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x0000000088fbc000) (143MB)
[ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000088fbc000-0x000000008936f000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000008936f000-0x000000008970c000) (3MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000008970c000-0x000000008972d000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000008972d000-0x0000000089741000) (0MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000089741000-0x0000000089742000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000089742000-0x0000000089746000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000089746000-0x0000000089747000) (0MB)
[ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x0000000089747000-0x0000000089cb2000) (5MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000089cb2000-0x0000000089cb4000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000089cb4000-0x0000000089ccf000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000089ccf000-0x0000000089cd0000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000089cd0000-0x0000000089d0f000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000089d0f000-0x0000000089d24000) (0MB)
[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x0000000089d24000-0x0000000089d4a000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000089d4a000-0x0000000089d4b000) (0MB)
[ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x0000000089d4b000-0x0000000089d4d000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000089d4d000-0x0000000089d53000) (0MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x0000000089d53000-0x0000000089d55000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000089d55000-0x0000000089d65000) (0MB)
[ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x0000000089d65000-0x0000000089d99000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000089d99000-0x0000000089dba000) (0MB)
[ 0.000000] efi: mem34: type=2, attr=0xf, range=[0x0000000089dba000-0x0000000089dbc000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000089dbc000-0x0000000089eb2000) (0MB)
[ 0.000000] efi: mem36: type=2, attr=0xf, range=[0x0000000089eb2000-0x0000000089eb9000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000089eb9000-0x0000000089ec4000) (0MB)
[ 0.000000] efi: mem38: type=2, attr=0xf, range=[0x0000000089ec4000-0x0000000089ec5000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000089ec5000-0x0000000089ec7000) (0MB)
[ 0.000000] efi: mem40: type=2, attr=0xf, range=[0x0000000089ec7000-0x0000000089ecc000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000089ecc000-0x0000000089ecd000) (0MB)
[ 0.000000] efi: mem42: type=2, attr=0xf, range=[0x0000000089ecd000-0x0000000089ece000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000089ece000-0x0000000089ed2000) (0MB)
[ 0.000000] efi: mem44: type=2, attr=0xf, range=[0x0000000089ed2000-0x0000000089ed3000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000089ed3000-0x000000008a123000) (2MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000008a123000-0x000000008a143000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000008a143000-0x000000008b3ca000) (18MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000008b3ca000-0x000000008b3de000) (0MB)
[ 0.000000] efi: mem49: type=1, attr=0xf, range=[0x000000008b3de000-0x000000008b413000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000008b413000-0x000000008b41d000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000008b41d000-0x000000008b42b000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000008b42b000-0x000000008b42d000) (0MB)
[ 0.000000] efi: mem53: type=2, attr=0xf, range=[0x000000008b42d000-0x000000008b42e000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000008b42e000-0x000000008b42f000) (0MB)
[ 0.000000] efi: mem55: type=2, attr=0xf, range=[0x000000008b42f000-0x000000008b430000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000008b430000-0x000000008b433000) (0MB)
[ 0.000000] efi: mem57: type=2, attr=0xf, range=[0x000000008b433000-0x000000008b435000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x000000008b435000-0x000000008b436000) (0MB)
[ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000008b436000-0x000000008b438000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000008b438000-0x000000008b43b000) (0MB)
[ 0.000000] efi: mem61: type=2, attr=0xf, range=[0x000000008b43b000-0x000000008b43e000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000008b43e000-0x000000008b43f000) (0MB)
[ 0.000000] efi: mem63: type=2, attr=0xf, range=[0x000000008b43f000-0x000000008b446000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000008b446000-0x000000008b543000) (0MB)
[ 0.000000] efi: mem65: type=2, attr=0xf, range=[0x000000008b543000-0x000000008b544000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000008b544000-0x000000008b55f000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x000000008b55f000-0x000000008b567000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000008b567000-0x000000008b57b000) (0MB)
[ 0.000000] efi: mem69: type=2, attr=0xf, range=[0x000000008b57b000-0x000000008b57c000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000008b57c000-0x000000008b582000) (0MB)
[ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x000000008b582000-0x000000008b584000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000008b584000-0x000000008b58c000) (0MB)
[ 0.000000] efi: mem73: type=3, attr=0xf, range=[0x000000008b58c000-0x000000008b593000) (0MB)
[ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x000000008b593000-0x000000008b594000) (0MB)
[ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x000000008b594000-0x000000008b595000) (0MB)
[ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x000000008b595000-0x000000008b597000) (0MB)
[ 0.000000] efi: mem77: type=3, attr=0xf, range=[0x000000008b597000-0x000000008b598000) (0MB)
[ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x000000008b598000-0x000000008b599000) (0MB)
[ 0.000000] efi: mem79: type=2, attr=0xf, range=[0x000000008b599000-0x000000008b59a000) (0MB)
[ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x000000008b59a000-0x000000008b59e000) (0MB)
[ 0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000008b59e000-0x000000008b5a3000) (0MB)
[ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x000000008b5a3000-0x000000008b5bd000) (0MB)
[ 0.000000] efi: mem83: type=3, attr=0xf, range=[0x000000008b5bd000-0x000000008b5c1000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x000000008b5c1000-0x000000008b5c5000) (0MB)
[ 0.000000] efi: mem85: type=2, attr=0xf, range=[0x000000008b5c5000-0x000000008b5c6000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x000000008b5c6000-0x000000008b5c8000) (0MB)
[ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x000000008b5c8000-0x000000008b5c9000) (0MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000008b5c9000-0x000000008b5ca000) (0MB)
[ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x000000008b5ca000-0x000000008b5d5000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x000000008b5d5000-0x000000008b5d9000) (0MB)
[ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x000000008b5d9000-0x000000008b5db000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x000000008b5db000-0x000000008b5ec000) (0MB)
[ 0.000000] efi: mem93: type=2, attr=0xf, range=[0x000000008b5ec000-0x000000008b5ed000) (0MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x000000008b5ed000-0x000000008b5f5000) (0MB)
[ 0.000000] efi: mem95: type=3, attr=0xf, range=[0x000000008b5f5000-0x000000008b631000) (0MB)
[ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x000000008b631000-0x000000008b647000) (0MB)
[ 0.000000] efi: mem97: type=3, attr=0xf, range=[0x000000008b647000-0x000000008b64a000) (0MB)
[ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x000000008b64a000-0x000000008b681000) (0MB)
[ 0.000000] efi: mem99: type=3, attr=0xf, range=[0x000000008b681000-0x000000008b68f000) (0MB)
[ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000008b68f000-0x000000008b69d000) (0MB)
[ 0.000000] efi: mem101: type=3, attr=0xf, range=[0x000000008b69d000-0x000000008b6b1000) (0MB)
[ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000008b6b1000-0x000000008b6b5000) (0MB)
[ 0.000000] efi: mem103: type=3, attr=0xf, range=[0x000000008b6b5000-0x000000008b6bb000) (0MB)
[ 0.000000] efi: mem104: type=2, attr=0xf, range=[0x000000008b6bb000-0x000000008b6bc000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000008b6bc000-0x000000008b6bd000) (0MB)
[ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x000000008b6bd000-0x000000008b6bf000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x000000008b6bf000-0x000000008b6c6000) (0MB)
[ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000008b6c6000-0x000000008b6df000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000008b6df000-0x000000008b6e0000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x000000008b6e0000-0x000000008b6e1000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000008b6e1000-0x000000008b6e2000) (0MB)
[ 0.000000] efi: mem112: type=2, attr=0xf, range=[0x000000008b6e2000-0x000000008b6e3000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000008b6e3000-0x000000008b6e5000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000008b6e5000-0x000000008b6e6000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000008b6e6000-0x000000008b6e7000) (0MB)
[ 0.000000] efi: mem116: type=2, attr=0xf, range=[0x000000008b6e7000-0x000000008b6e8000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000008b6e8000-0x000000008b6e9000) (0MB)
[ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000008b6e9000-0x000000008b6eb000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x000000008b6eb000-0x000000008b6ec000) (0MB)
[ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000008b6ec000-0x000000008b6f1000) (0MB)
[ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x000000008b6f1000-0x000000008b6f2000) (0MB)
[ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x000000008b6f2000-0x000000008b6f3000) (0MB)
[ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000008b6f3000-0x000000008b6f6000) (0MB)
[ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000008b6f6000-0x000000008b6f7000) (0MB)
[ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000008b6f7000-0x000000008b6f9000) (0MB)
[ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x000000008b6f9000-0x000000008b6fb000) (0MB)
[ 0.000000] efi: mem127: type=2, attr=0xf, range=[0x000000008b6fb000-0x000000008b6fc000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x000000008b6fc000-0x000000008b6fe000) (0MB)
[ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x000000008b6fe000-0x000000008b702000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x000000008b702000-0x000000008b705000) (0MB)
[ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x000000008b705000-0x000000008b70d000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x000000008b70d000-0x000000008b710000) (0MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x000000008b710000-0x000000008b715000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x000000008b715000-0x000000008b716000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x000000008b716000-0x000000008b717000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x000000008b717000-0x000000008b718000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x000000008b718000-0x000000008b71e000) (0MB)
[ 0.000000] efi: mem138: type=2, attr=0xf, range=[0x000000008b71e000-0x000000008b71f000) (0MB)
[ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000008b71f000-0x000000008b720000) (0MB)
[ 0.000000] efi: mem140: type=3, attr=0xf, range=[0x000000008b720000-0x000000008b722000) (0MB)
[ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x000000008b722000-0x000000008b724000) (0MB)
[ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x000000008b724000-0x000000008b728000) (0MB)
[ 0.000000] efi: mem143: type=2, attr=0xf, range=[0x000000008b728000-0x000000008b729000) (0MB)
[ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x000000008b729000-0x000000008b733000) (0MB)
[ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x000000008b733000-0x000000008b738000) (0MB)
[ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000008b738000-0x000000008b741000) (0MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x000000008b741000-0x000000008b75a000) (0MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x000000008b75a000-0x000000008b75c000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x000000008b75c000-0x000000008b76a000) (0MB)
[ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x000000008b76a000-0x000000008b76b000) (0MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x000000008b76b000-0x000000008b76e000) (0MB)
[ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x000000008b76e000-0x000000008b771000) (0MB)
[ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x000000008b771000-0x000000008b780000) (0MB)
[ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x000000008b780000-0x000000008b781000) (0MB)
[ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x000000008b781000-0x000000008b785000) (0MB)
[ 0.000000] efi: mem156: type=2, attr=0xf, range=[0x000000008b785000-0x000000008b786000) (0MB)
[ 0.000000] efi: mem157: type=4, attr=0xf, range=[0x000000008b786000-0x000000008b78b000) (0MB)
[ 0.000000] efi: mem158: type=3, attr=0xf, range=[0x000000008b78b000-0x000000008b78f000) (0MB)
[ 0.000000] efi: mem159: type=4, attr=0xf, range=[0x000000008b78f000-0x000000008b792000) (0MB)
[ 0.000000] efi: mem160: type=2, attr=0xf, range=[0x000000008b792000-0x000000008b793000) (0MB)
[ 0.000000] efi: mem161: type=4, attr=0xf, range=[0x000000008b793000-0x000000008b797000) (0MB)
[ 0.000000] efi: mem162: type=3, attr=0xf, range=[0x000000008b797000-0x000000008b798000) (0MB)
[ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x000000008b798000-0x000000008b79a000) (0MB)
[ 0.000000] efi: mem164: type=2, attr=0xf, range=[0x000000008b79a000-0x000000008b79b000) (0MB)
[ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x000000008b79b000-0x000000008b79c000) (0MB)
[ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x000000008b79c000-0x000000008b7ae000) (0MB)
[ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x000000008b7ae000-0x000000008b7af000) (0MB)
[ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x000000008b7af000-0x000000008b7b1000) (0MB)
[ 0.000000] efi: mem169: type=4, attr=0xf, range=[0x000000008b7b1000-0x000000008b7b3000) (0MB)
[ 0.000000] efi: mem170: type=3, attr=0xf, range=[0x000000008b7b3000-0x000000008b7bc000) (0MB)
[ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x000000008b7bc000-0x000000008b7c3000) (0MB)
[ 0.000000] efi: mem172: type=3, attr=0xf, range=[0x000000008b7c3000-0x000000008b7c4000) (0MB)
[ 0.000000] efi: mem173: type=4, attr=0xf, range=[0x000000008b7c4000-0x000000008b7c5000) (0MB)
[ 0.000000] efi: mem174: type=2, attr=0xf, range=[0x000000008b7c5000-0x000000008b7c6000) (0MB)
[ 0.000000] efi: mem175: type=4, attr=0xf, range=[0x000000008b7c6000-0x000000008b7c7000) (0MB)
[ 0.000000] efi: mem176: type=3, attr=0xf, range=[0x000000008b7c7000-0x000000008b7d5000) (0MB)
[ 0.000000] efi: mem177: type=4, attr=0xf, range=[0x000000008b7d5000-0x000000008b7d6000) (0MB)
[ 0.000000] efi: mem178: type=3, attr=0xf, range=[0x000000008b7d6000-0x000000008b7e3000) (0MB)
[ 0.000000] efi: mem179: type=4, attr=0xf, range=[0x000000008b7e3000-0x000000008b7e4000) (0MB)
[ 0.000000] efi: mem180: type=3, attr=0xf, range=[0x000000008b7e4000-0x000000008b7ee000) (0MB)
[ 0.000000] efi: mem181: type=4, attr=0xf, range=[0x000000008b7ee000-0x000000008b7ef000) (0MB)
[ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x000000008b7ef000-0x000000008b7f5000) (0MB)
[ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x000000008b7f5000-0x000000008b7f9000) (0MB)
[ 0.000000] efi: mem184: type=3, attr=0xf, range=[0x000000008b7f9000-0x000000008b7ff000) (0MB)
[ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x000000008b7ff000-0x000000008b800000) (0MB)
[ 0.000000] efi: mem186: type=3, attr=0xf, range=[0x000000008b800000-0x000000008b801000) (0MB)
[ 0.000000] efi: mem187: type=4, attr=0xf, range=[0x000000008b801000-0x000000008b802000) (0MB)
[ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x000000008b802000-0x000000008b804000) (0MB)
[ 0.000000] efi: mem189: type=4, attr=0xf, range=[0x000000008b804000-0x000000008b805000) (0MB)
[ 0.000000] efi: mem190: type=3, attr=0xf, range=[0x000000008b805000-0x000000008b806000) (0MB)
[ 0.000000] efi: mem191: type=4, attr=0xf, range=[0x000000008b806000-0x000000008b80b000) (0MB)
[ 0.000000] efi: mem192: type=3, attr=0xf, range=[0x000000008b80b000-0x000000008b80d000) (0MB)
[ 0.000000] efi: mem193: type=4, attr=0xf, range=[0x000000008b80d000-0x000000008b810000) (0MB)
[ 0.000000] efi: mem194: type=2, attr=0xf, range=[0x000000008b810000-0x000000008b811000) (0MB)
[ 0.000000] efi: mem195: type=3, attr=0xf, range=[0x000000008b811000-0x000000008b812000) (0MB)
[ 0.000000] efi: mem196: type=4, attr=0xf, range=[0x000000008b812000-0x000000008b814000) (0MB)
[ 0.000000] efi: mem197: type=3, attr=0xf, range=[0x000000008b814000-0x000000008b817000) (0MB)
[ 0.000000] efi: mem198: type=4, attr=0xf, range=[0x000000008b817000-0x000000008b819000) (0MB)
[ 0.000000] efi: mem199: type=3, attr=0xf, range=[0x000000008b819000-0x000000008b824000) (0MB)
[ 0.000000] efi: mem200: type=4, attr=0xf, range=[0x000000008b824000-0x000000008b826000) (0MB)
[ 0.000000] efi: mem201: type=3, attr=0xf, range=[0x000000008b826000-0x000000008b828000) (0MB)
[ 0.000000] efi: mem202: type=4, attr=0xf, range=[0x000000008b828000-0x000000008b82c000) (0MB)
[ 0.000000] efi: mem203: type=3, attr=0xf, range=[0x000000008b82c000-0x000000008b82d000) (0MB)
[ 0.000000] efi: mem204: type=4, attr=0xf, range=[0x000000008b82d000-0x000000008b82f000) (0MB)
[ 0.000000] efi: mem205: type=2, attr=0xf, range=[0x000000008b82f000-0x000000008b830000) (0MB)
[ 0.000000] efi: mem206: type=4, attr=0xf, range=[0x000000008b830000-0x000000008b832000) (0MB)
[ 0.000000] efi: mem207: type=3, attr=0xf, range=[0x000000008b832000-0x000000008b833000) (0MB)
[ 0.000000] efi: mem208: type=4, attr=0xf, range=[0x000000008b833000-0x000000008b837000) (0MB)
[ 0.000000] efi: mem209: type=3, attr=0xf, range=[0x000000008b837000-0x000000008b839000) (0MB)
[ 0.000000] efi: mem210: type=4, attr=0xf, range=[0x000000008b839000-0x000000008b83b000) (0MB)
[ 0.000000] efi: mem211: type=2, attr=0xf, range=[0x000000008b83b000-0x000000008b83c000) (0MB)
[ 0.000000] efi: mem212: type=4, attr=0xf, range=[0x000000008b83c000-0x000000008b83d000) (0MB)
[ 0.000000] efi: mem213: type=3, attr=0xf, range=[0x000000008b83d000-0x000000008b83e000) (0MB)
[ 0.000000] efi: mem214: type=4, attr=0xf, range=[0x000000008b83e000-0x000000008b841000) (0MB)
[ 0.000000] efi: mem215: type=3, attr=0xf, range=[0x000000008b841000-0x000000008b842000) (0MB)
[ 0.000000] efi: mem216: type=4, attr=0xf, range=[0x000000008b842000-0x000000008b859000) (0MB)
[ 0.000000] efi: mem217: type=3, attr=0xf, range=[0x000000008b859000-0x000000008b85e000) (0MB)
[ 0.000000] efi: mem218: type=4, attr=0xf, range=[0x000000008b85e000-0x000000008b863000) (0MB)
[ 0.000000] efi: mem219: type=2, attr=0xf, range=[0x000000008b863000-0x000000008b864000) (0MB)
[ 0.000000] efi: mem220: type=4, attr=0xf, range=[0x000000008b864000-0x000000008b8bf000) (0MB)
[ 0.000000] efi: mem221: type=3, attr=0xf, range=[0x000000008b8bf000-0x000000008b8d1000) (0MB)
[ 0.000000] efi: mem222: type=4, attr=0xf, range=[0x000000008b8d1000-0x000000008b8ec000) (0MB)
[ 0.000000] efi: mem223: type=3, attr=0xf, range=[0x000000008b8ec000-0x000000008b8ef000) (0MB)
[ 0.000000] efi: mem224: type=4, attr=0xf, range=[0x000000008b8ef000-0x000000008b91b000) (0MB)
[ 0.000000] efi: mem225: type=3, attr=0xf, range=[0x000000008b91b000-0x000000008b92f000) (0MB)
[ 0.000000] efi: mem226: type=4, attr=0xf, range=[0x000000008b92f000-0x000000008b930000) (0MB)
[ 0.000000] efi: mem227: type=2, attr=0xf, range=[0x000000008b930000-0x000000008b931000) (0MB)
[ 0.000000] efi: mem228: type=4, attr=0xf, range=[0x000000008b931000-0x000000008b94d000) (0MB)
[ 0.000000] efi: mem229: type=3, attr=0xf, range=[0x000000008b94d000-0x000000008b952000) (0MB)
[ 0.000000] efi: mem230: type=4, attr=0xf, range=[0x000000008b952000-0x000000008b958000) (0MB)
[ 0.000000] efi: mem231: type=2, attr=0xf, range=[0x000000008b958000-0x000000008b959000) (0MB)
[ 0.000000] efi: mem232: type=4, attr=0xf, range=[0x000000008b959000-0x000000008b95a000) (0MB)
[ 0.000000] efi: mem233: type=3, attr=0xf, range=[0x000000008b95a000-0x000000008b95b000) (0MB)
[ 0.000000] efi: mem234: type=4, attr=0xf, range=[0x000000008b95b000-0x000000008b95c000) (0MB)
[ 0.000000] efi: mem235: type=3, attr=0xf, range=[0x000000008b95c000-0x000000008b95d000) (0MB)
[ 0.000000] efi: mem236: type=4, attr=0xf, range=[0x000000008b95d000-0x000000008b970000) (0MB)
[ 0.000000] efi: mem237: type=3, attr=0xf, range=[0x000000008b970000-0x000000008b975000) (0MB)
[ 0.000000] efi: mem238: type=4, attr=0xf, range=[0x000000008b975000-0x000000008b976000) (0MB)
[ 0.000000] efi: mem239: type=3, attr=0xf, range=[0x000000008b976000-0x000000008b979000) (0MB)
[ 0.000000] efi: mem240: type=4, attr=0xf, range=[0x000000008b979000-0x000000008b97a000) (0MB)
[ 0.000000] efi: mem241: type=3, attr=0xf, range=[0x000000008b97a000-0x000000008b98b000) (0MB)
[ 0.000000] efi: mem242: type=4, attr=0xf, range=[0x000000008b98b000-0x000000008b98e000) (0MB)
[ 0.000000] efi: mem243: type=3, attr=0xf, range=[0x000000008b98e000-0x000000008b99a000) (0MB)
[ 0.000000] efi: mem244: type=2, attr=0xf, range=[0x000000008b99a000-0x000000008b99b000) (0MB)
[ 0.000000] efi: mem245: type=4, attr=0xf, range=[0x000000008b99b000-0x000000008b99c000) (0MB)
[ 0.000000] efi: mem246: type=3, attr=0xf, range=[0x000000008b99c000-0x000000008b99d000) (0MB)
[ 0.000000] efi: mem247: type=2, attr=0xf, range=[0x000000008b99d000-0x000000008b99e000) (0MB)
[ 0.000000] efi: mem248: type=4, attr=0xf, range=[0x000000008b99e000-0x000000008b99f000) (0MB)
[ 0.000000] efi: mem249: type=3, attr=0xf, range=[0x000000008b99f000-0x000000008b9a2000) (0MB)
[ 0.000000] efi: mem250: type=4, attr=0xf, range=[0x000000008b9a2000-0x000000008b9a3000) (0MB)
[ 0.000000] efi: mem251: type=3, attr=0xf, range=[0x000000008b9a3000-0x000000008b9a5000) (0MB)
[ 0.000000] efi: mem252: type=2, attr=0xf, range=[0x000000008b9a5000-0x000000008b9a6000) (0MB)
[ 0.000000] efi: mem253: type=4, attr=0xf, range=[0x000000008b9a6000-0x000000008b9a7000) (0MB)
[ 0.000000] efi: mem254: type=3, attr=0xf, range=[0x000000008b9a7000-0x000000008b9a8000) (0MB)
[ 0.000000] efi: mem255: type=4, attr=0xf, range=[0x000000008b9a8000-0x000000008bdc9000) (4MB)
[ 0.000000] efi: mem256: type=3, attr=0xf, range=[0x000000008bdc9000-0x000000008bdce000) (0MB)
[ 0.000000] efi: mem257: type=4, attr=0xf, range=[0x000000008bdce000-0x000000008be56000) (0MB)
[ 0.000000] efi: mem258: type=3, attr=0xf, range=[0x000000008be56000-0x000000008be5d000) (0MB)
[ 0.000000] efi: mem259: type=4, attr=0xf, range=[0x000000008be5d000-0x000000008be5e000) (0MB)
[ 0.000000] efi: mem260: type=2, attr=0xf, range=[0x000000008be5e000-0x000000008be5f000) (0MB)
[ 0.000000] efi: mem261: type=3, attr=0xf, range=[0x000000008be5f000-0x000000008be60000) (0MB)
[ 0.000000] efi: mem262: type=4, attr=0xf, range=[0x000000008be60000-0x000000008be61000) (0MB)
[ 0.000000] efi: mem263: type=3, attr=0xf, range=[0x000000008be61000-0x000000008be66000) (0MB)
[ 0.000000] efi: mem264: type=4, attr=0xf, range=[0x000000008be66000-0x000000008be67000) (0MB)
[ 0.000000] efi: mem265: type=3, attr=0xf, range=[0x000000008be67000-0x000000008be68000) (0MB)
[ 0.000000] efi: mem266: type=4, attr=0xf, range=[0x000000008be68000-0x000000008be69000) (0MB)
[ 0.000000] efi: mem267: type=3, attr=0xf, range=[0x000000008be69000-0x000000008be6a000) (0MB)
[ 0.000000] efi: mem268: type=4, attr=0xf, range=[0x000000008be6a000-0x000000008be6c000) (0MB)
[ 0.000000] efi: mem269: type=3, attr=0xf, range=[0x000000008be6c000-0x000000008be6d000) (0MB)
[ 0.000000] efi: mem270: type=4, attr=0xf, range=[0x000000008be6d000-0x000000008be92000) (0MB)
[ 0.000000] efi: mem271: type=3, attr=0xf, range=[0x000000008be92000-0x000000008be93000) (0MB)
[ 0.000000] efi: mem272: type=4, attr=0xf, range=[0x000000008be93000-0x000000008c358000) (4MB)
[ 0.000000] efi: mem273: type=2, attr=0xf, range=[0x000000008c358000-0x000000008c359000) (0MB)
[ 0.000000] efi: mem274: type=4, attr=0xf, range=[0x000000008c359000-0x000000008ccf7000) (9MB)
[ 0.000000] efi: mem275: type=2, attr=0xf, range=[0x000000008ccf7000-0x000000008ccf8000) (0MB)
[ 0.000000] efi: mem276: type=4, attr=0xf, range=[0x000000008ccf8000-0x000000008ccfa000) (0MB)
[ 0.000000] efi: mem277: type=2, attr=0xf, range=[0x000000008ccfa000-0x000000008ccfb000) (0MB)
[ 0.000000] efi: mem278: type=4, attr=0xf, range=[0x000000008ccfb000-0x000000008cd03000) (0MB)
[ 0.000000] efi: mem279: type=7, attr=0xf, range=[0x000000008cd03000-0x000000008cd13000) (0MB)
[ 0.000000] efi: mem280: type=10, attr=0xf, range=[0x000000008cd13000-0x000000008cd53000) (0MB)
[ 0.000000] efi: mem281: type=7, attr=0xf, range=[0x000000008cd53000-0x000000008cd69000) (0MB)
[ 0.000000] efi: mem282: type=9, attr=0xf, range=[0x000000008cd69000-0x000000008cd8f000) (0MB)
[ 0.000000] efi: mem283: type=7, attr=0xf, range=[0x000000008cd8f000-0x000000008ce3b000) (0MB)
[ 0.000000] efi: mem284: type=6, attr=0x800000000000000f, range=[0x000000008ce3b000-0x000000008ce8f000) (0MB)
[ 0.000000] efi: mem285: type=7, attr=0xf, range=[0x000000008ce8f000-0x000000008cece000) (0MB)
[ 0.000000] efi: mem286: type=5, attr=0x800000000000000f, range=[0x000000008cece000-0x000000008ceff000) (0MB)
[ 0.000000] efi: mem287: type=7, attr=0xf, range=[0x000000008ceff000-0x000000008cf92000) (0MB)
[ 0.000000] efi: mem288: type=0, attr=0xf, range=[0x000000008cf92000-0x000000008cfff000) (0MB)
[ 0.000000] efi: mem289: type=2, attr=0xf, range=[0x000000008cfff000-0x000000008d000000) (0MB)
[ 0.000000] efi: mem290: type=7, attr=0xf, range=[0x0000000100000000-0x000000016f600000) (1782MB)
[ 0.000000] efi: mem291: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem292: type=0, attr=0x8000000000000000, range=[0x000000008d000000-0x000000008fa00000) (42MB)
[ 0.000000] efi: mem293: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem294: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem295: type=11, attr=0x8000000000000000, range=[0x00000000ffe70000-0x00000000ffea0000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro9,1/Mac-4B7AC7E43945597E, BIOS MBP91.88Z.00D3.B08.1208081132 08/08/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x16f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 090000000 mask FF0000000 uncachable
[ 0.000000] 3 base 08E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 08D000000 mask FFF000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x16f400000-0x16f5fffff]
[ 0.000000] [mem 0x16f400000-0x16f5fffff] page 2M
[ 0.000000] BRK [0x02b35000, 0x02b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16f3fffff]
[ 0.000000] [mem 0x16c000000-0x16f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
[ 0.000000] [mem 0x100000000-0x16bffffff] page 2M
[ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02b37000, 0x02b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x8cd12fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x8cbfffff] page 2M
[ 0.000000] [mem 0x8cc00000-0x8cd12fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cd53000-0x8cd68fff]
[ 0.000000] [mem 0x8cd53000-0x8cd68fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cd8f000-0x8ce3afff]
[ 0.000000] [mem 0x8cd8f000-0x8ce3afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ce8f000-0x8cecdfff]
[ 0.000000] [mem 0x8ce8f000-0x8cecdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ceff000-0x8cf91fff]
[ 0.000000] [mem 0x8ceff000-0x8cf91fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cfff000-0x8cffffff]
[ 0.000000] [mem 0x8cfff000-0x8cffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7fcd7000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000008cd8e014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000008cd8e1c0 000B4 (v01 APPLE Apple00 00000000 01000013)
[ 0.000000] ACPI: FACP 000000008cd8c000 000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000008cd82000 04D53 (v01 APPLE MacBookP 00090001 INTL 20100915)
[ 0.000000] ACPI: FACS 000000008cd1e000 00040
[ 0.000000] ACPI: HPET 000000008cd8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000008cd8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000008cd88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000008cd87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000008cd7f000 002E0 (v01 APPLE SataAhci 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd7e000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd79000 00D20 (v01 APPLE UsbPpt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd6e000 013D8 (v01 APPLE TbtPEG11 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd6d000 00615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd6c000 00B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd6b000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008cd6a000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
[ 0.000000] ACPI: DMAR 000000008cd69000 00088 (v01 APPLE IVB 00000001 AAPL 00000001)
[ 0.000000] ACPI: MCFG 000000008cd89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16f5fffff]
[ 0.000000] NODE_DATA [mem 0x16f5f7000-0x16f5fbfff]
[ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016ac00000-ffff88016ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x16f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x8cd12fff]
[ 0.000000] node 0: [mem 0x8cd53000-0x8cd68fff]
[ 0.000000] node 0: [mem 0x8cd8f000-0x8ce3afff]
[ 0.000000] node 0: [mem 0x8ce8f000-0x8cecdfff]
[ 0.000000] node 0: [mem 0x8ceff000-0x8cf91fff]
[ 0.000000] node 0: [mem 0x8cfff000-0x8cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x16f5fffff]
[ 0.000000] On node 0 totalpages: 1032772
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8947 pages used for memmap
[ 0.000000] DMA32 zone: 572583 pages, LIFO batch:31
[ 0.000000] Normal zone: 7128 pages used for memmap
[ 0.000000] Normal zone: 456192 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8970c000-0x8970cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89721000-0x89721fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cd13000-0x8cd52fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cd69000-0x8cd8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ce3b000-0x8ce8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cece000-0x8cefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cf92000-0x8cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d000000-0x8f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
[ 0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88016f200000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016607
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3935088K/4131088K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 196000K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2294.978 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.20 BogoMIPS (lpj=7649926)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] init_memory_mapping: [mem 0x8ce3b000-0x8ce8efff]
[ 0.000034] [mem 0x8ce3b000-0x8ce8efff] page 4k
[ 0.000045] init_memory_mapping: [mem 0x8cece000-0x8cefefff]
[ 0.000046] [mem 0x8cece000-0x8cefefff] page 4k
[ 0.000086] init_memory_mapping: [mem 0x8d000000-0x8f9fffff]
[ 0.000087] [mem 0x8d000000-0x8f9fffff] page 2M
[ 0.026158] Security Framework initialized
[ 0.026166] AppArmor: AppArmor disabled by boot time parameter
[ 0.026167] Yama: becoming mindful.
[ 0.026441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.027488] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.027952] Mount-cache hash table entries: 256
[ 0.028114] Initializing cgroup subsys memory
[ 0.028122] Initializing cgroup subsys devices
[ 0.028124] Initializing cgroup subsys freezer
[ 0.028125] Initializing cgroup subsys net_cls
[ 0.028127] Initializing cgroup subsys blkio
[ 0.028148] CPU: Physical Processor ID: 0
[ 0.028149] CPU: Processor Core ID: 0
[ 0.028538] mce: CPU supports 9 MCE banks
[ 0.028551] CPU0: Thermal monitoring enabled (TM1)
[ 0.028560] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.028670] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.029671] ACPI: Core revision 20130725
[ 0.036004] ACPI: All ACPI Tables successfully acquired
[ 0.037838] ftrace: allocating 20318 entries in 80 pages
[ 0.047613] dmar: Host address width 36
[ 0.047615] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.047621] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.047622] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.047627] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.047628] dmar: RMRR base: 0x0000008d800000 end: 0x0000008f9fffff
[ 0.047699] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.047700] HPET id 0 under DRHD base 0xfed91000
[ 0.047701] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
[ 0.047705] Not enable interrupt remapping
[ 0.047706] Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
[ 0.048157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081147] smpboot: CPU0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[ 0.081154] TSC deadline timer enabled
[ 0.081162] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.081169] ... version: 3
[ 0.081170] ... bit width: 48
[ 0.081171] ... generic registers: 4
[ 0.081171] ... value mask: 0000ffffffffffff
[ 0.081172] ... max period: 0000ffffffffffff
[ 0.081173] ... fixed-purpose events: 3
[ 0.081174] ... event mask: 000000070000000f
[ 0.118277] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.104573] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
[ 0.240347] Brought up 8 CPUs
[ 0.240351] smpboot: Total of 8 processors activated (36734.63 BogoMIPS)
[ 0.247904] devtmpfs: initialized
[ 0.250380] PM: Registering ACPI NVS region [mem 0x8cd13000-0x8cd52fff] (262144 bytes)
[ 0.251164] RTC time: 7:32:07, date: 01/09/14
[ 0.251202] NET: Registered protocol family 16
[ 0.251294] cpuidle: using governor ladder
[ 0.251296] cpuidle: using governor menu
[ 0.251322] ACPI: bus type PCI registered
[ 0.251324] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.251381] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[ 0.251384] PCI: not using MMCONFIG
[ 0.251385] PCI: Using configuration type 1 for base access
[ 0.251999] bio: create slab <bio-0> at 0
[ 0.252116] ACPI: Added _OSI(Module Device)
[ 0.252117] ACPI: Added _OSI(Processor Device)
[ 0.252118] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.252119] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.253362] ACPI: EC: EC description table is found, configuring boot EC
[ 0.257523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 2.254668] ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20130725/evregion-287)
[ 2.254672] ACPI Error: Method parse/execution failed [\_SB_.PCI0.ZYXW] (Node ffff880169288708), AE_ERROR (20130725/psparse-536)
[ 2.254677] ACPI Error: Method parse/execution failed [\_SB_._INI] (Node ffff880169253fa0), AE_ERROR (20130725/psparse-536)
[ 2.255095] ACPI: SSDT 000000008cd19190 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.255414] ACPI: Dynamic OEM Table Load:
[ 2.255416] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.268225] ACPI: SSDT 000000008cd1a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.268583] ACPI: Dynamic OEM Table Load:
[ 2.268585] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.281264] ACPI: SSDT 000000008cd18d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.281581] ACPI: Dynamic OEM Table Load:
[ 2.281583] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.295568] ACPI: Interpreter enabled
[ 2.295575] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 2.295579] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 2.295592] ACPI: (supports S0 S3 S4 S5)
[ 2.295593] ACPI: Using IOAPIC for interrupt routing
[ 2.295614] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[ 2.295963] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
[ 2.319936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.320064] ACPI: No dock devices found.
[ 2.328628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.328727] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 2.328815] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 2.329006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
[ 2.329109] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 2.329127] PCI host bridge to bus 0000:00
[ 2.329129] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.329131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.329133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.329135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.329136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 2.329138] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 2.329139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 2.329141] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 2.329142] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 2.329144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 2.329145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 2.329147] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 2.329148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 2.329150] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 2.329151] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 2.329153] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 2.329154] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 2.329156] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
[ 2.329157] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 2.329165] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 2.329244] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 2.329277] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.329309] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 2.329346] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[ 2.329425] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 2.329464] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 2.329498] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 2.329509] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
[ 2.329516] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 2.329521] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 2.329611] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 2.329633] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
[ 2.329696] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.329729] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.329765] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 2.329790] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
[ 2.329869] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.329945] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 2.329968] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
[ 2.330059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.330095] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2.330130] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 2.330143] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
[ 2.330205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.330240] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 2.330273] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 2.330352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.330391] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 2.330423] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 2.330502] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.330540] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 2.330572] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 2.330653] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.330690] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 2.330733] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 2.330755] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
[ 2.330846] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.330882] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.330917] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 2.331082] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 2.331102] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
[ 2.331111] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 2.331120] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
[ 2.331129] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 2.331137] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 2.331145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
[ 2.331192] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.331255] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 2.331269] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
[ 2.331285] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 2.331414] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
[ 2.331425] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
[ 2.331436] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 2.331447] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 2.331455] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 2.331463] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
[ 2.331519] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 2.331560] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 2.331569] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
[ 3.338172] pci 0000:00:01.0: ASPM: Could not configure common clock
[ 3.338218] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.338221] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 3.338223] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 3.338227] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 3.338301] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
[ 3.338304] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
[ 3.338308] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
[ 3.338314] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 3.338460] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000
[ 3.338493] pci 0000:02:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
[ 3.338518] pci 0000:02:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
[ 3.338668] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.338738] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 3.338824] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[ 3.338861] pci 0000:02:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
[ 3.339051] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 3.339096] pci 0000:02:00.1: System wakeup disabled by ACPI
[ 3.344942] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 3.344949] pci 0000:00:1c.0: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 3.344955] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
[ 3.345076] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
[ 3.345105] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a03fff 64bit]
[ 3.345247] pci 0000:03:00.0: supports D1 D2
[ 3.345286] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 3.351561] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 3.351568] pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
[ 3.351673] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
[ 3.351712] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1900fff 64bit]
[ 3.351903] pci 0000:04:00.0: supports D1 D2
[ 3.351904] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.358214] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 3.358221] pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
[ 3.358742] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 3.358790] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 3.358836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 3.358883] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 3.358929] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 3.358973] ACPI: PCI Interrupt LI did read that report initially; I ended up just removing bluez and bluez-utils since I don't care that much about using those peripherals. I imagine that if I downgraded the kernel I might be able to run bluez and get the trackpad to work. I think I'd rather keep my copy of the kernel up-to-date at this point since I don't really care that much about using that trackpad. Thanks for the suggestion, though—if I decide I really do want to use it I'll downgrade and see if that helps.
The problems with running programs seem to have fixed themselves semi-mysteriously. That problem was persisting through reboots initially. I looked at the running processes and saw that the programs I had tried to open were actually running, but KDE wasn't behaving as such. I tried rebooting and using startx to see if I could see those programs running there, which I could. After that KDE behaved properly.
It seems like HFS support for fsck is poorly if at all supported outside of Mac OS, so I booted into Mac OS and ran fsck_hfs on my media partition. This worked, and I can read and write from it again.
EDIT: In case anyone is curious, there seems to be a fix pending for the trackpad issues—see here and here.
Last edited by tenfoxes (2014-01-09 20:42:45) -
Hello, I am having a problem using compiz with kde's kicker panel. I have my kicker set on auto-hide and when I enable the option in CCSM "unredirect fullscreen windows" my screen flickers when the kicker panels is raised. This problem dissapears when I again unmark the CCSM option.
I am using kde 4.6.2 and nvidia 270.41.06-1
Any help or workarounds would be appreciated.From the Compiz Fusion wiki:
Should programs be allowed to draw directly into a fullscreen window, bypassing the compositing process? This can significantly increase the performance of fullscreen games and videos, but may also cause visual glitches. If you don't know which setting is right for your use case, it's safer to leave this option disabled.
Seems like this is an expected issue, since Plasma renders itself independently of other apps and windows and therefore wouldn't comply with Compiz options (accept those found under "KDE Compatability"). I'm not sure how much of the issue would be your video driver and how much would be the window manager. -
[SOLVED] KDE / Dolphin : panel's places doesn't show the label of LVM
i'm not sure if it's a bug or a missing feature in arch but in the panel's places of Dolphin all my LVM partitions are labeled « X GB hard drive » even if they have a real label name. It's just working with non-LVM partition. (In debian dolphin i don't have this problem, LVM patitions are defined by their label.)
Running blkid or udisk –dump find for each LVM partition the label, here an exemple
Showing information for /org/freedesktop/UDisks/devices/dm_2d3
native-path: /sys/devices/virtual/block/dm-3
device: 254:3
device-file: /dev/dm-3
presentation: /dev/dm-3
by-id: /dev/disk/by-id/dm-name-mvg-LogVol_Arch_KDE
by-id: /dev/disk/by-id/dm-uuid-LVM-VeiFIUUyMdIae9ebAA0Pf5CVJdhrzzEcxfETxrr9dtE8TZSEYBlVFHHrXW5X3fbm
by-id: /dev/disk/by-uuid/2ab52173-2a95-4b41-9f4b-d5725c9a7550
detected at: sam. 16 juin 2012 10:51:10 CEST
system internal: 1
removable: 0
has media: 1 (detected at sam. 16 juin 2012 10:51:10 CEST)
detects change: 0
detection by polling: 0
detection inhibitable: 0
detection inhibited: 0
is read only: 0
is mounted: 1
mount paths: /
mounted by uid: 0
presentation hide: 0
presentation nopolicy: 1
presentation name:
presentation icon:
automount hint:
size: 21474836480
block size: 512
job underway: no
usage: filesystem
type: ext4
version: 1.0
uuid: 2ab52173-2a95-4b41-9f4b-d5725c9a7550
label: Arch_KDE
drive:
vendor:
model:
revision:
serial:
WWN:
detachable: 0
can spindown: 0
rotational media: Yes, unknown rate
write-cache: unknown
ejectable: 0
adapter: Unknown
ports:
similar devices:
media:
compat:
interface: (unknown)
if speed: (unknown)
ATA SMART: not available
and blkid for this device :
/dev/mapper/mvg-LogVol_Arch_KDE: LABEL="Arch_KDE" UUID="2ab52173-2a95-4b41-9f4b-d5725c9a7550" TYPE="ext4"
and the infos of solid-hardware for this device where the label appears too : (solid-hardware details /org/freedesktop/UDisks/devices/dm_2d3)
udi = '/org/freedesktop/UDisks/devices/dm_2d3'
parent = '/org/freedesktop/UDisks' (string)
vendor = '' (string)
product = '' (string)
description = '20,0 GiB Hard Drive' (string)
Block.major = 254 (0xfe) (int)
Block.minor = 3 (0x3) (int)
Block.device = '/dev/dm-3' (string)
StorageAccess.accessible = true (bool)
StorageAccess.filePath = '/' (string)
StorageAccess.ignored = false (bool)
StorageDrive.bus = 'Platform' (0x5) (enum)
StorageDrive.driveType = 'HardDisk' (0x0) (enum)
StorageDrive.removable = false (bool)
StorageDrive.hotpluggable = false (bool)
StorageDrive.inUse = true (bool)
StorageDrive.size = 21474836480 (0x500000000) (qulonglong)
StorageVolume.ignored = false (bool)
StorageVolume.usage = 'FileSystem' (0x2) (enum)
StorageVolume.fsType = 'ext4' (string)
StorageVolume.label = 'Arch_KDE' (string)
StorageVolume.uuid = '2ab52173-2a95-4b41-9f4b-d5725c9a7550' (string)
StorageVolume.size = 21474836480 (0x500000000) (qulonglong)
is anyone having the same problem ?
I take some time to find a solution, not sure if it's a problem of my configuration, a missing feature, a arch bug or a kde bug... If it's one i can open a bug in the system
I'm actually on KDE 4.8.90 but it was too in previous version
Last edited by ewilly (2012-11-24 14:51:11)ewilly wrote:Sorry to say that but i'm not unhappy to see i'm not alone to encounter this issue
I aggree with you : it's only a partial issue as those partitions are mounted under /media with their label name.
As krusader is able to retrieve the label name i don't think it's an udisks issue so it's more related to a kde functionnality. I looked for missing (optionnal or not) dependencies but without success.
Any idea is welcome... perhaps opening a bug could help ??
I have run out of ideas.
If you tried krusader, yes, it is quite safe to assume it is not a udisks problem, since I tried nautilus which uses udisks2. I also would rule out udev/systemd. Leaves solid, kdelibs, and the kdebase sources.
As said, on gentoo, kdelibs are compiled with udev dependency which I have not seen in the pkgbuild for kdelibs.
I think a bug report is a good idea.
Last edited by artoo (2012-09-06 18:01:49) -
In Keyword List panel, need to support quotes for AND'ing multi-word keyword searches
As far as I know (and read around), there's no way to search multi-word keywords in the keywords list panel using the "Filter Keywords" box. i.e. If I want to search for the "Great Blue Heron" keyword in a large animal keywords list I have, Lightroom will OR the three words instead of AND'ing them like Aperture does more intuitively. Adding quotes like "Great Blue Heron" doesn't work either. Again this is to filter a large keyword lists through the "Filter Keywords" box in the Keywords List panel.
Am I missing something? Is it possible to AND multi-word keywords?
Thanks.Rob,
as far as I know spaces are also contained and allowed in controlled vocabularies (e.g. for the "official" names of animals 'little panda' for example and plants). I'm using spaces for names very often. As a prof. photographer I need to write captions for all of my images before sending them to my agency with WHEN/WHAT/WHERE/WHO etc. So when shooting persons very often or regular (e.g. politicians or athletes) I started years ago to create keywords and hierarchies for them. So it is much easier and more comfortable to assign them later.
Please check out PhotoMechanic or IMatch. These progs doesn't have any problems with spaces in keywords and keyword searches...
BTW: when using a space in a search I expect that the default behaviour of such a space is a locical AND.
Lars -
Here is my class for a sliding panel. The class is released as open source. Please feel free to feed this into your IDE and provide feedback for improvement.
Known issues include: double clicking the component2 to be shown, some flickering in graphics.
import javax.swing.*;
import java.awt.*;
public class JSlidingPanel extends JPanel{
private JComponent component1, component2;
private Dimension dim1, dim2;
private int rate = 30, delay=35; //deals with showing speed. How smooth should animation occur. default 7. delay = 5; //also deals with showing speed. How fast to show component2. default 10
private boolean shown, showing, hiding, newComponent;
private GridBagLayout grid;
private GridBagConstraints c;
static JPanel p2;
public static void main(String[] a){
final JSlidingPanel s = new JSlidingPanel();
JLabel label = new JLabel("Put Mouse HERE");
label.addMouseListener(new java.awt.event.MouseAdapter(){
public void mouseEntered(java.awt.event.MouseEvent e){
s.showComponent2();
if(s.getComponent2() == null){
s.setComponent2(p2);
s.getComponent2().setSize(new Dimension(100, 100));
}public void mouseExited(java.awt.event.MouseEvent e){
s.hideComponent2();
JPanel p1 = new JPanel();
p1.add(label);
p1.setOpaque(true);
p1.setBackground(Color.red);
p2 = new JPanel();
p2.setOpaque(true);
p2.setBackground(Color.green);
p2.setLayout(new BoxLayout(p2, BoxLayout.Y_AXIS));
JPanel p2_1 = new JPanel();
p2_1.add(new JLabel("HELLO Olvin"));
p2_1.setOpaque(true);
p2_1.setBackground(Color.white);
JPanel p2_2 = new JPanel();
p2_2.add(new JLabel("HELLO Olvin"));
p2_2.setOpaque(true);
p2_2.setBackground(Color.gray);
JPanel p2_3 = new JPanel();
p2_3.add(new JLabel("HELLO Olvin"));
p2_3.setOpaque(true);
p2_3.setBackground(Color.black);
p2.add(p2_1);
p2.add(p2_2);
p2.add(p2_3);
p2.setMinimumSize(new Dimension(100, 200));
p2.setMaximumSize(new Dimension(100, 200));
p2.setPreferredSize(new Dimension(100, 200));
p2.setSize(new Dimension(100, 200));
s.setComponent1(p1);
s.setComponent2(null);
//s.getComponent2().setSize(new Dimension(100, 100));
JPanel panel = new JPanel();
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
panel.add(new JLabel("Hola"));
panel.add(s);
panel.add(new JLabel("<html><div style='height: 40px; background:#0000FF;'> </div></html>"));
JFrame f=new JFrame("");
f.setContentPane(panel);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.setSize(650,500);
f.setVisible(true);
public JSlidingPanel(){
super();
newComponent=false;
grid = new GridBagLayout();
c = new GridBagConstraints();
c.fill=GridBagConstraints.HORIZONTAL;
c.anchor=GridBagConstraints.NORTH;
c.weightx=1;
c.weighty=0;
setLayout(grid);
public void paintComponent(Graphics g){
super.paintComponent(g);
if(newComponent && component2 != null){
try{
dim1 = new Dimension(component1.getSize().width, component1.getSize().height);
dim2 = new Dimension(component2.getSize().width, component2.getSize().height);
realizeDimensions();
}catch(Exception ex){JOptionPane.showMessageDialog(null, "Component1 not set");}
newComponent=false;
public synchronized boolean isComponentShown(){
return shown;
public synchronized void setComponent1(JComponent panel) {
if(panel==null){
panel=new JPanel();
panel.setOpaque(false);
component1 = panel;
c.gridx=0;
c.gridy=0;
c.gridwidth=1;
c.gridheight=1;
c.fill=GridBagConstraints.HORIZONTAL;
grid.setConstraints(component1, c);
add(component1, 0);
public synchronized JComponent getComponent2() {
return component2;
public synchronized void setComponent2(JComponent panel) {
if(panel==null){
panel=new JPanel();
panel.setName("null");
panel.setOpaque(false);
if(component1 == null){
setComponent1(null);
}if(component2 != null){
this.remove(component2);
newComponent=true;
component2 = panel;
c.gridx=0;
c.gridy=1;
c.gridwidth=1;
c.gridheight=1;
c.fill=GridBagConstraints.HORIZONTAL;
grid.setConstraints(component2, c);
add(component2, 1);
updateUI();//repaint components. Needed
public synchronized void hideComponent2(){
if(showing || hiding || component2==null)return;
Thread t1 = new Thread(){
public void run(){
hiding=true;
int counter = dim2.height-rate;
while(component2.getSize().height > 0){
if( counter < 0 ){
int extra = counter;
int exact_amount = (counter - extra) ;
counter = exact_amount;
component2.setPreferredSize(new Dimension(dim2.width, counter));
component2.setMinimumSize(new Dimension(dim2.width, counter));
component2.setMaximumSize(new Dimension(dim2.width, counter));
component2.setSize(new Dimension(dim2.width, counter));
setPreferredSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setMinimumSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setMaximumSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
component2.updateUI();
try{
Thread.sleep(delay);
}catch(Exception ex){}
counter -= rate;
hiding=false;
shown=false;
};t1.start();
public synchronized void showComponent2(){
if(showing || hiding || component2==null || dim2==null)return;
Thread t1 = new Thread(){
public void run(){
showing=true;
int counter = rate;
while(component2.getSize().height < dim2.height){
if( counter > dim2.height ){
int extra = (counter-dim2.height);
int exact_amount = counter-extra;
counter = exact_amount;
component2.setPreferredSize(new Dimension(dim2.width, counter));
component2.setMinimumSize(new Dimension(dim2.width, counter));
component2.setMaximumSize(new Dimension(dim2.width, counter));
component2.setSize(new Dimension(dim2.width, counter));
setPreferredSize(new Dimension(dim1.width, dim1.height+counter));
setMinimumSize(new Dimension(dim1.width, dim1.height+counter));
setMaximumSize(new Dimension(dim1.width, dim1.height+counter));
setSize(new Dimension(dim1.width, dim1.height+counter));
component2.updateUI();
try{
Thread.sleep(delay);
}catch(Exception ex){}
counter += rate;
showing=false;
shown = true;
};t1.start();
private void realizeDimensions(){
component2.setPreferredSize(new Dimension(dim2.width,0));
component2.setMinimumSize(new Dimension(dim2.width,0));
component2.setMaximumSize(new Dimension(dim2.width,0));
component2.setSize(new Dimension(dim2.width,0));
setPreferredSize(dim1);
setMinimumSize(dim1);
setMaximumSize(dim1);
setSize(dim1);
updateUI();
}Im sorry guys for not replying it was probably because I didnt add this topic to my Watchlist. Now it is. Anyhow, I wrote a slightly different main() so you can test the custom JPanel again. This time it displays a red label. Once you place the mouse over it, it should make another JLabel (green colored) )visible. Known issues still include unwanted flickering, use of threads(instead of timers), and too many lines of code(7.5KB). This code is public domain so the community can make any changes. Please post your code modifications in this forum.
It runs fine under Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
import javax.swing.*;
import java.awt.*;
public class JSlidingPanel extends JPanel{
private static final long serialVersionUID = 1L;
private JComponent component1, component2;
private Dimension dim1, dim2;
private int rate = 20;
private int delay = 10;
private boolean shown;
private boolean showing;
private boolean hiding;
private GridBagLayout grid;
private GridBagConstraints c;
private boolean newComponent;
public static void main(String[] a){
final JSlidingPanel s = new JSlidingPanel();
JLabel label = new JLabel("Put Mouse HERE");
label.addMouseListener(new java.awt.event.MouseAdapter(){
public void mouseEntered(java.awt.event.MouseEvent e){
s.showComponent2();
}public void mouseExited(java.awt.event.MouseEvent e){
s.hideComponent2();
JPanel p1 = new JPanel();
p1.add(label);
p1.setOpaque(true);
p1.setBackground(Color.red);
JPanel p2 = new JPanel();
p2.setOpaque(true);
p2.setBackground(Color.green);
p2.setLayout(new BoxLayout(p2, BoxLayout.Y_AXIS));
p2.add(new JLabel("<html><h1>My HTML Label</h1><p>This component is a JLabel inside a JPanel.</p>"));
s.setComponent1(p1);
s.setComponent2(p2);
s.getComponent2().setSize(new Dimension(100, 300));
JFrame f=new JFrame("");
f.setContentPane(s);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.setSize(650,500);
f.setVisible(true);
public JSlidingPanel(){
super();
newComponent=false;
grid = new GridBagLayout();
c = new GridBagConstraints();
c.fill=GridBagConstraints.HORIZONTAL;
c.anchor=GridBagConstraints.NORTH;
c.weightx=1;
c.weighty=0;
setLayout(grid);
public void paintComponent(Graphics g){
super.paintComponent(g);
if(newComponent && component2 != null){
try{
dim1 = new Dimension(component1.getSize().width, component1.getSize().height);
dim2 = new Dimension(component2.getSize().width, component2.getSize().height);
realizeDimensions();
}catch(Exception ex){JOptionPane.showMessageDialog(null, "Component1 not set");}
newComponent=false;
public int getDelay() {
return delay;
public void setDelay(int delay) {
this.delay = delay;
public int getRate() {
return rate;
public void setRate(int rate) {
this.rate = rate;
public synchronized boolean isComponentShown(){
return shown;
public synchronized boolean isComponentHidden(){
return !shown;
public synchronized boolean isComponentShowing() {
return showing;
public synchronized boolean isComponentHiding() {
return hiding;
public synchronized JComponent getComponent1() {
return component1;
public synchronized void setComponent1(JComponent panel) {
if(panel==null){
panel=new JPanel();
panel.setOpaque(false);
component1 = panel;
c.gridx=0;
c.gridy=0;
c.gridwidth=1;
c.gridheight=1;
c.fill=GridBagConstraints.HORIZONTAL;
grid.setConstraints(component1, c);
add(component1, 0);
public synchronized JComponent getComponent2() {
return component2;
public synchronized void setComponent2(JComponent panel) {
if(panel==null){
panel=new JPanel();
panel.setName("null");
panel.setOpaque(false);
if(component1 == null){
setComponent1(null);
}if(component2 != null){
this.remove(component2);
newComponent=true;
component2 = panel;
c.gridx=0;
c.gridy=1;
c.gridwidth=1;
c.gridheight=1;
c.fill=GridBagConstraints.HORIZONTAL;
grid.setConstraints(component2, c);
add(component2, 1);
updateUI();
public synchronized void hideComponent2(){
if(isComponentShowing() || isComponentHiding() || getComponent2()==null)return;
Thread t1 = new Thread(){
public void run(){
hiding=true;
int counter = dim2.height-rate;
while(component2.getSize().height > 0){
if( counter < 0 ){
int extra = counter;
int exact_amount = (counter - extra) ;
counter = exact_amount;
component2.setPreferredSize(new Dimension(dim2.width, counter));
component2.setMinimumSize(new Dimension(dim2.width, counter));
component2.setMaximumSize(new Dimension(dim2.width, counter));
component2.setSize(new Dimension(dim2.width, counter));
setPreferredSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setMinimumSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setMaximumSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
setSize(new Dimension(dim1.width, dim1.height+component2.getSize().height));
component2.updateUI();
try{
Thread.sleep(delay);
}catch(Exception ex){}
counter -= rate;
hiding=false;
shown=false;
};t1.start();
public synchronized void showComponent2(){
if(isComponentShowing() || isComponentHiding() || getComponent2()==null || dim2==null)return;
Thread t1 = new Thread(){
public void run(){
showing=true;
int counter = rate;
while(component2.getSize().height < dim2.height){
if( counter > dim2.height ){
int extra = (counter-dim2.height);
int exact_amount = counter-extra;
counter = exact_amount;
component2.setPreferredSize(new Dimension(dim2.width, counter));
component2.setMinimumSize(new Dimension(dim2.width, counter));
component2.setMaximumSize(new Dimension(dim2.width, counter));
component2.setSize(new Dimension(dim2.width, counter));
setPreferredSize(new Dimension(dim1.width, dim1.height+counter));
setMinimumSize(new Dimension(dim1.width, dim1.height+counter));
setMaximumSize(new Dimension(dim1.width, dim1.height+counter));
setSize(new Dimension(dim1.width, dim1.height+counter));
component2.updateUI();
try{
Thread.sleep(delay);
}catch(Exception ex){}
counter += rate;
showing=false;
shown = true;
};t1.start();
private void realizeDimensions(){
component2.setPreferredSize(new Dimension(dim2.width,0));
component2.setMinimumSize(new Dimension(dim2.width,0));
component2.setMaximumSize(new Dimension(dim2.width,0));
component2.setSize(new Dimension(dim2.width,0));
setPreferredSize(dim1);
setMinimumSize(dim1);
setMaximumSize(dim1);
setSize(dim1);
updateUI();
} -
When changing headphones to 5.1 rear not working(volume panel), need to default in diagnostic t
Hi,
When I'm changing headphones to 5. in volume panel my rear speakers and middle one won't work...
I need to run diagnostic tool where I need to chose the default option in order to get my rear and middle
speakers to work.. I need to do this every time...
It get's annoying as I play BF242 and then try to listen to some music ot watch an movie in 5. ...
it takes an minute or so to do this but I would preffer not to have to....
I'm an xfi noob so there may be an setting that is causing this... does anyone knows how to change this?
edit: btw. the headphones(headset actually) are connected to the panel...
x-fi platinum champion fatalty, xp
the speakers are connected to teh x-fi card (analog)
edit2: It seems that when changing headphones to 5. the front center, rear left and rear right are being played in headphones...
:S?
Message Edited by foxhound009 on 06-07-2008 2:29 PMMessage Edited by foxhound009 on 06-07-2008 2:38 PMQuote from: Chrysomya on 29-April-13, 20:14:26
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Your issue is drivers related.
For Windows 8 use 6.0.1.6839
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064 -
Folio Builder Panel - need clarifications
Hi All,
I need the below clarifications on Folio Builder Panel:
(1) After installing Folio Builder Tool, I tried to generate FOLIO file, it shows like only one FOLIO will be generated as free, pl. confirm whether I can continue in generating FOLIO as free like done in pre-release tool 'Adobe Digit Content Bundler'
(2) After installing Folio Builder Tool, I unable to use 'Adobe Digit Content Bundler', pl. confirm whether I need to reinstall again the installed tool and installing again the 'Adobe Digit Content Bundler'
Thanks,
PraveenThanks Bob, for point 1, is it ok if I reinstall the same pre-release tool to generate the FOLIO file and continue for some more time, since my concern is not yet come to the conclusion to invest amount only for creating FOLIO files?
Praveen -
Opinion Needed on Atlona AV Toolbox CDM-660 Standards Converter
In the course of day-to-day transfers of VHS to DVD I am getting a mounting number of requests to convert PAL to NTSC. I have the Nattress plug-ing and I am familiar with Compressor's ability to transcode, but both are rather time intensive. As a result, I am looking at hardware based option that can give reasonable results in real time.
As such, while checking tigerdirect I found the "Atlona AV Toolbox CDM-660 Standards Converter". It seems to do exactly what I need (fully covering all the potential standards in either direction), and the price is quite reasonable.
Can anyone give me an opinion on this particular unit, or possibly suggestions on an alternative product.
Any and all opinions welcome.
Thanks
GaryThanks Burt for the reply and suggestion.
Even with a speedy software solution, it still takes (minimum) 3x realtime (Capture>convert>Burn DVD). Way too much time to be cost effective for my customers! With hardware, it is realtime (Play>burn), and therefore I would not have to charge $100/hr+ for the transfer. I want to keep it under $50/2hr DVD.
The transfers do NOT have to be broadcast quality. It just needs to be good enough for that average joe to get the VHS to DVD and not loose the memories from the tape. Consider, many of these tapes are recorded at EP! Broadcast quality would be a bit overkill...
Thanks,
Gary -
Toshiba 8" LCD panel - Need pinout diagram
I bought this LCD panel (part # LTA080B820A) specifically because it said it had analog RGB input instead of digital inputs that most LCD's accept.
http://www.geeks.com/details.asp?invtid=LTA080B820A&cat=MON
Now i need to find a pinout diagram that tells me which pin does what on the input connector so that I can wire it up.
Anyone have a clue where i can find a pinout diagram for it, or know of a way to test the pins.
I figured since it is analog RGB i should be able to solder up a homeade VGA cable, would this work?
Help if you can .
Thanks,
-KrysHi
Such technical manuals are not for public and I think you should get in contact with an authorized service provider. Here its only an user to user platform and I doubt that you can get these informations here.
Anyway, here you can search for an ASP in your country:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider -
Recon 3d Control Panel needs 30 seconds to start
I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
GreetingsOriginally Posted by juettnla
I've bought the Recon 3d PCIe. My operating system is windows7.
My problem: when I click on the Control Panel Symbol it need about 30 seconds to start. I've the latest driver update. I tried a new clean installation but got the same problem.
I there anyone else with this problem ?
Greetings
Same here, but it only happens when it's first opening of CP, other times it opens fast.
Maybe you are looking for
-
How to customize an interactive report PDF using a BI Publisher template
Hi, I am trying to figure out how to get an interactive report to work with BI Publisher. I want it so that I can create a custom RTF template with custom headings, and then apply this for the interactive report. On the front end, when a user runs an
-
Cannot use DDNS service in china!
I am use WRT300N V1(Firmware Version: v1.03.6) wireless router in china, and use China Telecom ADSL Broadband service, I want to use DDNS service but never connet to DynDNS.org, please help me to solve the problem,many thanks. Joe
-
HT1420 First world problems... Is there any way to authorize more than 5?
I have three apple Tv's in my home. I have 3 macs, 3 iPads, and three iPhones. Is there really no way to authorize all of MY apple devices at once?
-
Our podcast was approved and running for 3 weeks, 4 episodes, and we just received an email saying we were rejected. Not sure why this is, our feed validates fine. Title: Ruby5 Description: All your ruby news in 5 Feed URL: http://feeds.feedburner.co
-
To the apple management , my name is koh peeng hwah ,On the 8 jun 2012 I received one error changes via my visa card .it was very disappointed . Because I just download a free app Astro on the go , I hope your can revise the changes . Thank you. <Ed