"Keep In Dock" option not working

That's all.

Have you tried 'reset home directory permissions and ACLs' on your home folder? Apple has a tool to do this. it's in the reset password utility, located on the install disk that was included with your computer.
To see how to boot to the install disk, and access the reset password utility check out steps 1 through 4 of "Resetting the original administrator account password" in Mac OS X: Changing or resetting an account password do not do steps 5 though 8.
Instead, use the pull down menu "Select a user of this volume to reset their password" to select your account, and then click on the "Reset" button at the very bottom of the window.
then perform steps 8 through 10.

Similar Messages

No Keep in Dock option

Hi, new user here. We're running eMacs in a small school computer lab (15 total), on 10.4.11. When I log in to any eMac as a workstation (where I log in with administrative rights), I'd like to add applications to the dock. However as I drag the apps over to the dock, they are not accepted, they only bounce back to where they originally were. I tried to open the apps I want to keep in the dock--when they are there and opened, I control-clicked on the icon so get the "Keep in Dock" option but it wasn't there. It only says "Show in Finder" and "Quit." I'd love to get this sorted out. Many thanks in advance!

It's not totally clear from your description what the set up is... But am I right in thinking you have an administrator account on each eMac plus a managed "workstation" account for students?
If correct, log into the admin account (logging out of workstation first) and go to System Preferences/Accounts. Unlock the padlock icon. Click the workstation account icon, go to the Parental Controls tab, check Finder & System, hit Configure button... In the tab that comes up, check "Modify the Dock" button.
Log into the workstation account; you should now be able to drag applications to the dock.

Apple 10.4 managed clients dock settings not working

I have an issues with 3 or 4 of my 10.4 clients all are managed by WGM on an apple 10.5 server. The I have managed dock settings on all apple clients are getting the proper dock settings however I have 3 or 4 clients that are not. The clients that are not getting the dock settings are in the correct computer group. And I don't see any of the clients dedicated in the computer group. And suggestions or tips would be welcome help.

THAT WORKED and all is back to normal.
By the way I did not lose any of the icons on my dock either. All the apps light up under the icon and they now mimimize correctly!!
Thank you very much capfred!!!
Chet
captfred East Coast, USA
This helped meRe: dock settings not working Sep 3, 2012 7:34 AM (in response to CaptainChet)
Try deleting com.apple.dock.plist from the preference folder located in your user Library.
You can open the hidden library in Finder's menubar, Finder > Go > hold the option key down > select Library.
Edit: you'll have to add back program icons to the dock that you moved there.

Keep in dock option disappeared

Hello,
Since some days, without any notable changes in my macbook pro, I can't move icons of dock into the dock, and I can't remove or add some ! And "keep in dock" option disappeared... I am under mac os 10.7.4.
Please help me !

Tahnk you for your fast answer. I already tried that, and I repaired disk permissions.
But it didn't work

Wifi option not working in my i phone 4s ios 7.0.2, how to fix it

wifi option not working in my i phone 4s ios 7.0.2, how to fix it

Now my wifi is working but not showing the wifi logo on the top

I keep getting "Applephotostream.exe" not working on my pc. How can I fix or reset?

I keep getting "Applephotostream.exe" not working on my pc. How can I fix or reset?

My Vista Home Premium System Type is a 64 bit Operating System.
I was hoping that someone in the Apple Community would have a solution.
Still waiting.
Thanks for your response. Keep checking back.

[svn] 1967: * Fixed issue where -keep-generated-actionscript would not work

Revision: 1967
Author: [email protected]
Date: 2008-06-05 08:12:21 -0700 (Thu, 05 Jun 2008)
Log Message:
* Fixed issue where -keep-generated-actionscript would not work
properly when -generate-abstract-syntax-tree was enabled, which is
now the default.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
API Change: NO
Reviewer: clucier
Code-level description of changes:
CompilerConfiguration.java
Modified setKeepGeneratedActionScript() to force AST generation
off when the value is true.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Dock icons not working, wont say whether an app is being used or not

I just bought my imac yesterday, not even 24 hours old, maybe 17, already im having problems with it. When i turn on my mac and start up an app it works great and what not, but then after i try to open another it, the app will bounce and keep bouncing and not stop, the light never shows up. So after that happens, the icons on the dock wont work properly, the apps work, but the icons on the dock dont.
Thanks in advance, dont take this the wrong way, i love macs, its just disappointing i buy it and in 40 mins my dock starts messing up.

Welcome to Apple Discussions!
It does sound like your dock isn't working properly, but I'm not sure what to tell you. Have you done all the software updates yet? OS 10.5.1 is out. You might check with software update and then go to the Apple site Downloads and bring everything up to date. Remember to repair permissions before and after downloading software. Maybe this might fix your problem with the dock. If not, please post back.
Good luck!

Why is the livechat option not working?

This has got to be the worst customer service I have ever experienced. I just want to talk to a real human being. My phone is currently not working, so calling is not an option. Everytime I go through the "get support" page it gives me three contact options, but will not let me click the livechat option. I am doing this during normal service hours, and it is not a holiday. I have been trying all day, so unless you are extremely busy that can't be it either. Please, just give me a link so I can talk to somebody! I don't want to waste more time on these forums. Thank you.

in general, adobe's pretty generous about that: things you create using adobe programs are yours to keep and/or sell even if they're created using adobe programs that are in trial use.
here are the specifics: Licenses and terms of use | Adobe

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

InfoPath 2013 - Rich Text box - Expand to show all text option not working

I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
expand the size of the text box based on the content length.
same thing used to work in InfoPath 2010.
Any suggestions?
Thanks,
Neelesh

Hi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.

Hierarchy Node Variable search (find) option not working

Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
Is node find/search in not working in Bi 7.0 .
Thanks
R

Hi Rohan,
We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
Hope this hels...let me know if u require any further info on this..
Best Regards,
Maruthi

3rg gen ipod dock connector not working with new imac on leopard 10.5.1

Recently found that my 3rd gen ipod is not working properly when i connect it using its dock. itunes just freezes and comes out with some "disk insertion error". however, when i don't use the dock and connect the ipod to the imac directly using its own firewire cable, everything is ok and working properly.
it seems to be the ipod dock that is the problem. but am wondering why wouldn't it work? any ideas? I'd still like to be able to use the ipod dock...
thanks.

ipodaid.page.tl go there, he got my iPod fixed.

Complaint - Netflix and Youtube (internet option) not working on Apple TV 2 - Please advise

Netflix and Youtube (internet option) is not working on Apple TV 2 I bought - please advise how to fix this. Please note this is not to do with signing in as the internet menu and option to sign in is not given at all on screen/within ATV2. The only menu options which appear on screen are "computer" and "settings" and nothing else.
I have read from some other posts this may be because of the country in which I am located (currently the UAE) - this of course is not an acceptable excuse and if the real reason I hope Apple will fix this immediately. From the box I bought the description on the reverse side of the packaging clearly states "Plays movies and TV shows from Netflix, live and archived games from MLB, NBA, and NHL, and videos from YouTube and Vimeo".
If it is a country specific/territory issue then the packaging must be changed for countries in which this does not work as this product is being missold to customers, especially as having the option to stream Netflix, YouTube and Vimeo is one of its unique selling points - without which I would not have bought it in the 1st place!
Currently very disappointed in Apple (normally a complete Apple fan!)
Any help appreciated (positive comments only thank you).

In reply to the comment "You seem to be saying that the box that you have is different in some way". I'm actually not saying that at all as I have no idea what your box says and therefore can't comment.
And unless you're on the packaging design or distribution teams it would be a giant leap to presume every single box around the world is the same based on the product being the same.
As a marketing person I know companies of all sizes and shapes tailor their products to cater for individual markets. E.g. coca cola cans have different designs based on distribution location and languages used in particular countries and even the product itself can differ, although this may not be the case with Apple of course.
I'm simply describing what is on my box and I don't neccessarily mean to be abrupt however I certainly wouldn't waste my time typing on this forum to say the box says something when it actually does not.
Let me know if you can postively affect the outcome of this problem/help in someway and I'll be sure to send the image.
Thanks.

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

"Keep In Dock" option not working

Similar Messages

Maybe you are looking for