Keep Together when we have two detail sections

Post Author: achaithanya
CA Forum: General
Hai,
I have two Detail Sections and when you look at the report data is split and is displayed in two pages. It should be together. If we have single section then we use Keep Together option. I have tried with this option also.
1st page end
AAAA
BBBB
aaaa
bbbbb
2nd page start
cccc
dddd
Data should not split as above and it should displayed in any one of those pages.
Thanks in advance,
Regards,
Chaithanya.

Post Author: [email protected]
CA Forum: General
keep together is good for that section only. unless there is a parent section that you could turn keep together on, i don't know of a way

Similar Messages

Bug: when you have two or more reminder pop-ups on BB10, you can't edit 2 or more of them because the second and beyond are lost...

I notice that when you have two or more reminder pop-ups on BB10 (tasks, calendar, etc.), you can't edit 2 or more of these because the second and beyond get lost and will never pop-up again.

Hey JVanB,
Thank you for your feedback.
To better understand your issue, for example If you have two reminders and select 'View Event Details' on the 1st reminder, does the 2st reminder popup before the Details of the1st reminder displays?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

Firefox freezes for up to a minute when I have two tabs open and running a video and a flash game. Why?

Firefox freezes for up to a minute when I have two tabs open, one playing a YouTube video, the other with a flash game running, and the screen shows the contents of both tabs, one superimposed on the other. If I have other tabs open, they also appear as visual garbage on the same screen. After the freeze, everything semi-works, starting and stopping, with long frozen hangs.The frequency of this problem is increasing and greatly reduces Firefox's operating capacity. I am using Firefox 5.0 on a Windows Vista desktop made by Hewlett-Packard. I have cleared the caches and the problem persists, and I can't find any online help to explain why this is happening. I don't recall it happening with a previous version of Firefox.

Hello jesterabk, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

HT1296 How do you sync iphone and PC when you have two different iphones/users?

How do you sync iphone and PC when you have two different iphones/users in house? I just tried to sync my iphone and cancelled sync becauase I saw it was updating my phone with my husband's apps! How do I make it so that sync can distinguish between my and my husband's phone?

I sync two iPhones and an iPad with one iTunes library on the same computer and each device has different content. Each device has its own sync preferences with iTunes. You can transfer the same music and apps to each device or different music and apps.
Are you sharing the same Apple ID or iTunes account?

TS2776 An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

I need two query in one report (two detail section in one query)

Hi master sorry for again distribute
Sir I need two query in one report
Because I need two detail section in my one report
Such as
Master
Vno=9088989
Detail          1
=
=
==
=
Total                     99999
Detail          2
=
=
==
=
Total                     33333
Sir how I get this type of report
Please give me idea
Thanking you
Aamir

I want to see the report as follow.
d_name: CPU-1
date: -----------
Software installed:
sw_id, software, version, serial_no, sw_type
(list of softwares attached, can be more then one)
Hardware attached:
hw_id, hardware, specification (same like software list, it will contain hardware list attached to specific device),
Please if you can help me that how will i make a query for this.
Thanks and Regards
Maz

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

How can I restore my contacts, when I have two phpnes on one account? In icloud are the contacts of the first phone, and in my computer is the back up of my second phone

How can I restore my comtacts from pc back up when I do have two phones with one account?the i cloud has contacts from one of the phones, and the pc back up from the other?

Hi Silky-Milky!
If I understand your question correctly, you are attempting to merge your contacts from your previous phone's backup into your iCloud account, then go back to using your new phone as normal, with the new merged database of contacts. I have an article that can tell you how to do exactly that:
Recovering iCloud or MobileMe data from iTunes backups for an iOS device
http://support.apple.com/kb/TS4108
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Best iCloud setup when I have two apple ID's

Ok so I have two apple ID's---One is a yahoo email address, and that is what I began using forever ago with iTunes, so I have a bunch of purchased music and apps with that username. Since that is my ITUNES username, that is what my iphone has been setup with.
The OTHER apple ID is my original .mac ID, which is now my mobileme ID, which was syncing my calendars, notes, yada yada yada
Does anyone out there have suggestions on how I should go about setting up this iCloud. Can you give reasons why one ID would be more beneficial over the other. I am trying to simplify my life and workflow, but it seems Apple keeps effing things up with their new fangled technologies!!! ;o)
Emails and Calendars are using my .mac name while music is using my yahoo name, how can I simplify all this?!?!?!
Cheers

You will need to continue to use the Apple ID you are using for iTunes for iTunes, whether or not you use it for iCloud sync services or not is up to you, you can move your contacts etc to iCloud once you log in. On the other hand you could upgrade your MM account to iCloud and use that ID just for sync services.
Personally, I chose to use use my Apple ID for iTunes as my iCloud Apple ID, but I never really used my MM email address all that much.

How to delete one apple id account when you have two

How do I delete the apple id and password I use on my iPhone
and just use the one on my MacBook for both devices.
When I bought my iPhone I tried to set up my apple id on the phone using the same username and password as on my MacBook
but it didn't like my password on the iPhone.
The password was acceptable on the MacBook but the iPone required a more complicated password.
So, I set up a separate Apple id on my iPhone
and now I have two apple ids and I'd like to delete one and just use one for both devices.

There's no way to delete an Apple ID. Just don't use it.

How do you close only one window (not tab) when you have two open?

I can close a tab when I have multiple ones open but if I have two windows open and I close one window it closes all other windows. How can I close just one window without shutting down any other windows?

Yes, when I click on the red X it closes both windows. I'll try the Ctrl+w
Thanks

Outgoing email bug when you have two accounts each with an SMTP.

I have two email accounts on iPhone and each has a different outgoing SMTP server associated it the account. One is SBC the other is my domain ISP. (Sometimes I like to send out of SBC but when it gets slow I can sent out of my domain.)
Here is the thing. Each account has a "from" email address THE SAME (i.e. [email protected]).
Now get this No matter which account I send out of, the mail ALWAYS go through the SMPT server of the FIRST account in the account list. HOWEVER, if I change one of the "from" email addresses to something different than the other (ie. [email protected]) the mail will go out of the correct SMTP server.
What is THAT all about? It looks like iPhone is looking to use the return address as a factor in determining what SMTP to use. It SHOULD use the SMTP of the account mail is SENT from... but it doesn't... if the return addresses are the same.
Any ideas?
Al

You will need to contact iTunes Store support and you will lose access to any purchased content from that account. You may wish to consider just asking to disable the account or how to better manage multiple accounts.
http://www.apple.com/support/itunes/contact/
Support link

Simple and maybe stupid question when you have two instances

Just a simple question, I was just wondering how to create user account on the local machine when you run two instances of oracle.For example all the commands I use to start and stop the database use the variables stored in the oracle user bash_profile.
But do I have to create another user to manage the other instance because it should use another bash_profile with a different oracle_sid?

Linux and Unix installations of Oracle are kind-a funny. At the end of te installation is a request to run 'root.sh'. That does a few things: set up permissions and ownerships correctly; copy some scripts into the specified directory (default /usr/local/bin).
If you were to look at /usr/local/bin, you would notice a few files, typically with names "dbhome.sh, oraenv.sh, oraenv.csh". These are designed to set up the PATH, the ORACLE_HOME and the ORACLE_SID correctly, based on user response and information in the oratab file - which is /etc/oratab in Linux. (I always ensure there to link oraenv.sh as oraenv)
Longer story shortened:
Assume you use(d) dbca to create the instances. Then you can source the oraenv.sh to set up the environment:
pop2@fuzzy:~> . oraenv.sh
[pop2]? orcl
pop2@fuzzy:~> env | grep -i ora
ORACLE_SID=orcl
PATH=/opt/oracle/product/10.2.0/server/bin:/home/pop2/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
ORACLE_HOME=/opt/oracle/product/10.2.0/serverThat way you can switch to any known environment simply by sourcing oraenv and telling it which SID you want. It extracts the info from /etc/oratab.
You can tell oraenv to shut up by setting ORAENV_ASK to 'NO' and setting the ORACLE_SID variable before sourcing oraenv. This is useful in .profile - for example my /etc/profile contains the followig:
export ORACLE_SID=XE
ORAENV_ASK=NO
. oraenv

Keep Together when we have two detail sections

Similar Messages

Maybe you are looking for