Keeps asking for Dual layer DVD

I made a slideshow in iMovie and shared to iDVD8. The media windows shows the file as 2.7 gig. But when I go to burn it says to insert a Dual Layer DVD because the project to large.
I dont have anything else in the project other then the menu which is 3 drop areas. Nothing to it.
I tried sharing again from imovie and selected medium this time with a files size of 1.7gig and i still get the same thing.
I do have quality set for PRO.

good question. I used the Theme that has half the screen as a grey fade. When i added music to it i changed it to 25 secs of playback. I would assume then my menu is only 25sec. It only has 1 button to start the movie.
At this point I have a DVD+R DL created that works fine my PC. After googling around I read about DL and changing the bitsetting before burning so that a TV DVD Player sees the disk as a DVD-ROM.
Would I be able to copy this DVD+R DL with Toast 8 and change that setting to make it work?
BTW, thank you for all the replies.
Bill

Similar Messages

  • Compressing 7.5 Hour video for Dual Layer DVD

    I've got to compress 7.5 hours of footage into an MPEG2 fittable on a Dual Layer DVD. The client knows that the quality will be inferior. Anyone have any suggestions as to settings before I start? I'm guessing to set the bitrate to 2.3 or so. How about the maximum? Thanks!

    I used Compressor and set everything on the MPEG 2 settings to the lowest I could, like 2.1-5.0 and compressed the **** out of it. It looks pretty decent for that much compression. It only fit because I chopped off the credits sequence from the 15 different sections, compressed that seperately, then had them link to it so that it was actually about seven hours of footage. There's a little pixelation when you go into certain motion areas, but the client's happy. I only recommend doing this if there are no other options.
    AK

  • Media write error for dual layer DVD burn

    I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
    Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
    Does anyone have a suggestion on how I can fix this?
    Thanks

    I am using Memorex DVD +R DL disks.
    Try Verbatim DVD+R DL discs.

  • Outputting a file for dual layer dvd

    Hi...is there a setting in Adobe media encoder that automatically caculates your timeline to fit a dual layer DVD?  The MPEG DVD output setting automatically shrinks it to 3 gigs, enough to fit a standard DVD.  I feel the quality of the file would be better if it was larger and burned to a dual layer. 
    Thanks

    If you're authoring in Encore, you set the Layer Breaks there.  You can let Encore find them for you automagically, or you can set your own, or render out your own separate timeline for each layer.  Read p.178 of the Encore Help PDF.

  • Project for dual layer DVD

    Hi there,
    I have a project which contains several individual sequences that have been compressed separately and which constitutes several parts of my future DVD.
    The total size is such that I need to burn a dual layer DVD.
    How do I determine where to include the marker indicating to switch layer ?
    I have done it before with a long project containing only one sequence, but this time the sequences are independent....
    Would DVDSP include automatically a "change layer" marker if I burn as is ?
    Thanks in advance
    Ivan

    I'd recommmend looking up "About Choosing a Dual-Layer Break Point" in the DVD Studio Pro user's manual or Help File.
    -DH

  • Suitable marker break point error for dual layer DVD!

    I'm a new FCP user of a few months and DVDSP of one week.
    I have read the manual again and again and I am still not sure how to add a suitable break point. I added a chapter marker and set it as a dual layer break point, not sure if that is correct. Quicktime Movie is 5.9 GB, it does everything except burn to DVD in SP. I can burn this movie in IDVD though. Please help me!
    Thank you in advance for your help, I appreciate the assistance everyone so willingly gives. Thank you!

    Will compressor or Mpeg cause degeneration of picture quality?
    If you put it on DVD-Video, you have to convert it to MPEG2 (with either Compressor or by letting DVDSP convert it). It will lose quality as a result. The only way to minimize this is to use as high a bitrate for your MPEG2 file as possible. Compressor has some presets labeled 60 min, 90 min, and 120 min, that will allow movies of that length to fit onto a single-layer DVD.
    You should probably re-read the opening chapters of the DVDSP manual; they cover this important and fundamental information relatively well.

  • Dual layer DVD will not play after iDVD burning

    Hi All,
    I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
    I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

    I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
    That part I don't understand.
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Dual Layer DVD Burners?  (Best Choices)

    What are people having the Best luck with Dual Layer DVD wise?
    I have an older G4 (as seen on bottom of post)
    I've been reading that the DVD+ format is the way to go as far as Dual Layer DVD is concerned..
    Does that mean I wouldn't be able to play it back on my single layer SuperDrive?
    Thanks,
    Eric

    Can't anyone give me a couple of good choices for Dual Layer DVD Burners for the G4?
    I know that LaCie makes one, are they're any better choices?
    Thanks Again,
    Eric
    Which model of LaCie, or others are recommended?
    (or not recommended?)

  • How can I burn a 5GB iso to a dual layer DVD (I get a size error..)

    I converted a 5GB *.mkv to iso for dual layer dvd with devede. When I try to burn the iso with growisofs -dvd-compat -Z /dev/sr0 /home/hk/movie/movie.iso, I get: /movie.iso is larger than 4GiB-1.
    -allow-limited-size was not specified. There is no way do represent this file size. Aborting.
    :-( write failed: Input/output error
    What could I do? Thank you

    Chances are the ISO is not dvd compliant & does not contain layer change info:
    http://forum.doom9.org/archive/index.php/t-113514.html
    EDIT: Alternative
    For the lazy you can install ImgBurn into a Windows NT4 bottle/prefix
    then install the latest ASPI.dll
    issue a wineboot for the bottle/prefix
    then build the dvd in ImgBurn BUT you will need to use dvdauthor to create the correct dvd folder structure & files
    http://forum.imgburn.com/index.php?showtopic=1777
    Last edited by t0m5k1 (2013-05-22 14:49:24)

  • Firmware upgrade for Matshita DVD-R UJ-845E to burn dual layer DVD?

    Dear All
    I have a PowerBookG4 with a Matshita DVD-R UJ-845E which it seems apple has disabled from burning dual layer DVD. I've read around that there are firware upgrades that can enable actions again. I can't find any for Matshita DVD-R UJ-845E, though. Any ideas?
    Thank you!
    Angie
    PowerBookG4   Mac OS X (10.4.8)  

    angie1976 you have me directly.
    As stated in previous posts there have been several issues with the Matshita Optical drives that Apple has installed in there computers. Over time the problem has been discussed and it would appear that there are several things that come into play here.
    Apple has made it so that many of the drives they intall are in fact not capable of there full potential.
    It in fact boils down to an issue of Copywrite Infringment. Apple doesn't want to put itself in a position to be open to Lawsuits from the Motion Picture Industry.
    Many of the drives that do not work up to there full potential have FIRMWARE updates that are offered by the manufacture to remedy this problem and some do not.
    It has also been found that the casual user that burns DVD's isn't aware of the huige difference in the Format's available for DVD Burning. and the many limitations of these different drives as far as Media and Speed of Media is concerned. Many of the DL burners that were installed will not burn DL. Apple has had such a huge amount of dissatisfied customers that many that will take the time and if they still have AppleCare these drives will be replaced free of charge.
    Here are a collection of links that will help you to understand the problem as it exists.
    I will also say that upwards of 85% of the problems user expieriance is with POOR QUALITY MEDIA.
    http://www.digitalfaq.com/media/dvdmedia.htm
    http://www.videohelp.com/dvd
    I also noticed that some others have chimed in as to the fact that Media was not the issue. This is not entirely true.
    Here is another post that I answered that will also cover this subject that may help you understand the problem a little better.
    Let me see if I can shed some light on this issue, for you.
    Maybe some others as well can.
    There are several Applications that are standard programs that come with OSX.
    Of these, several have the ability to burn a project.
    iTunes....iMovie.....Disk Utility.
    Each of the above mentioned applications were developed for a specific purpose. However, they are capable of doing more than the original developers intended.
    The problem in my eyes is the lack of information for a new user to Mac.
    In what one would consider the perfect world, you simply choose a project, drag it in to one or more of the applications mentioned above and simply click burn and you are finished.
    This is not always the case.
    Often users are left with the issue of no clear cut direction on how to use these different burning softwares, and the ability to have a clear cut step by step user interface.
    All of the furnished OSX burning software is in fact usable and works well.
    The problem is HOW TO USE THEM.
    The more experienced users find this either to be a non issue or will take the time to work with these different applications until they figure out how to use them.
    There are of course different Advertisements and FAQ's that cover these to some degree that leave users more confused than when they started.
    One of the major issues that accompany this problem is this.
    Not all Burners that Apple uses in there machines are the same.
    Not all Burners will accept all the different Media's that are available on the market.
    Thus leaving many users confused. Not having a clear cut understanding of what the difference is between these different Media's and there use.
    http://www.videohelp.com/dvd.htm
    The above link offers an overview of this subject.
    Apple has found itself in a delima with the Motion Picture Industry, as well as The Music Industry over the issue of offering there users with the capability of copying Copyrighted material. Thus leaving them open for Law Suits.
    There was an in-depth article in one of the recent issues of Macworld Magazine, that went in-depth covering this issue.
    It is almost impossible to cover all aspects of this issue on these forums.
    There are of course different softwares available that make the burning experience much easier and user friendly.
    Roxio is one of the industry leaders in the development of Mac compatible Burning Software. They offer 2 of the industry leaders in this area.
    Toast-7 and Popcorn.
    This solves only one portion of the problem. Both of these software offering give the user the ability to copy about anything.
    However, there is so much controversy over the issue of Movie and Music copying, the manufactures of the Computers, and the Burners try to limit the users ability to copy these, and thus be clear of any Legal Issue.
    Here again rises the problem of computer users being mad because the industry has placed limitations on there ability to use there product in a fast easy to use method.
    Again there are work around to all of these issues.
    The problem then becomes who out there is willing to tell us what is the easiest most trouble free method of using these computers, burners, software,and media.
    The burner manufactures offer there burners.
    To get them to work to there full potential the users then must search out the 3rd party Firmware updates that will enable them to work properly. This is not an issue with all burners but quite a few.
    Most readers on these forums have read about the MEDIA compatibility and poor quality issues these are covered in a prior link.
    To sum this up, the resources are available to do just about anything one wants to do in the copy area.
    Not every copy problem is the same because of all the different elements that come into the equation, Burner, Media, Software, Firmware.
    So if a user has a problem and needs the information and the resources to copy there projects whatever they may be.
    Be through, give as much information as you can.
    Keep it simple, No need for the use of exotic terms that most people don't understand anyway.
    In-depth. Tell all aspects of the issue and what you have what you are using and what you want to accomplish.
    If there is an answer out there.
    Someone will Chime in.
    The users on these forums for the most part are more than willing to share in there knowledge, free of charge.
    One last thing,
    When a user gives you an answer for you problem, for the most part they believe it to be a fact. Sometimes this isn't the case, we have all been guilty of, this is not done with malicious intent. It is done trying to help.
    I personally have been misinformed, or tried a fix, that will work in one instance but not another. So tell all you can about your problem.
    Cheers Don

  • Best strategy for buring dual layer DVD

    I've got a project that won't fit on a single layer DVD, so I've got it set up for dual layer and "best quality" which results in a 7.38GB disk image.  However, iDVD 8 warned me when burning the disk images that some utilities may not be able to burn a reliable dual layer disk copy and to use iDVD instead, does this include Disk Utility?
    I always use Disk Utility to make copies, iDVD took almost 7 hours to burn the disk image, I can't afford to wait that long for each copy.  So what's the best strategy for burning dual layer DVDs?

    subsequent copies burn in far less time immediately after the first provide you don't quit iDvd
    If you know ahead of time you'll need more than a few copies, I'd recommend burning from a disc image to the desktop and reducing the burn speed (4x or lower) I prefer to use Roxio Toast myself. But others have had success with Apple's Disc Utilities as well.

  • Internal Dual-Layer DVD Writer for Tecra M1

    Hi,
    Does anyone know of a suitable internal dual-layer DVD writer for the Tecra M1?
    Thanks,
    Colin

    Hi,
    check this site and you will find some proper information about Tecra S1 and DVD Writer!
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=EU&PRODUCT_ID= 102102&DISC_MODEL=0&toshibaShop=reseller
    Bye

  • Will iTunes recognize dual layer DVDs/drives for backing up purchases?

    If I have a dual layer dvd in a drive that supports dual layer burning, will itunes be able to use it to its fullest capacity?

    DaddyPaycheck,
    Just after i posted my message i thought i'd pop in a DL DVD in the drive, open Toast and see again what Toast would do.
    Lo and behold, i check disk capacity in Toast and it shows the full 8GB. So i'm currently copying a 6GB DV file to the DL DVD ... so far so good. I want to see if it completes the task this time without errors.
    I'll know within 15 minutes whether it worked. Holding my breath ....
    Paul

  • Dual Layer DVD reader for Sun Blade 2500?

    Can anyone recommend a dual layer DVD reader that will work with the Sun Blade 2500 (Silver)? Either something to replace the built-in single layer reader or something that will work externally either via firewire or USB.
    Thanks!

    I haven't had occasion to use a dual-layer drive yet, but I've found that all the external and internal Sony drives I've ever happened to plug into my old 1500 worked great...

  • Two hour sequence to dual-layer DVD?

    Hi,
    I'm confused.
    I have a two hour 16:9 sequence (actually 1 hour, 56 minute) that I want to put on a dual-layer DVD. I guess I didn't fully think it through when I sent it from FCP to Compressor and selected DVD 16:9 120 minute fastest encode, because it compressed it to 4.04 gigs rather than twice that size at a better quality. Now I'm looking for a setting that tells it my destination is a dual-layer DVD and I don't see it.
    Additionally, the m2v file that came from that process cut off the final minute or so of my sequence. Why in the world would that happen?
    Kenny

    These instructions assume you're using DSP for authoring. I don't know if iDVD has DL capability.
    The 'calculator' in Compressor assumes a single layer DVD. The key is to look at the summary, which is the far left tab in the Inspector. About 1/3 from the top, it will show the estimated file size. Adjust the bit rate selector until you get the file size approaching the capacity of the Dual Layer disk. You have other restrictions to consider as well. Totally data rate of video(s)audio(s)other data cannot exceed the maximum for the DVD spec (nominally 10mb/s).
    Once inside DSP, when you burn the disk, you'll be asked to select a marker to indicate where the burner will change from writing to the first layer to the second layer. This should occur at a convenient location in the video (a fade to black, eg.) near the end of the first layer capacity. If you don't already have a marker near that point, be sure to add one for the switch-over.
    Good luck
    allen

Maybe you are looking for

  • Error in preloading Servlet

    Hi, I am new to Weblogic....I have an application built on struts and are able to deploy in Tomcat and Websphere. I copy the exploded application to user_projects\mydomain\applications and start the server. The following comes up:           ####<2005

  • Quicktime 7 Screen movie in iWeb '09

    Is there a way to include a Quictime 7 Screen Movie in iWeb '09? I tried dragging the file onto the page I want it to appear and exported the changes but on the actual page it just shows the "Q" marker. I then tried uploading the actual movie file to

  • HT201269 dont have iphone anymore but it is still trying to function as iphone in text from others

    I dont have my iphone anymore, but other iphones cant send me text because it says i still have an iphone. ATT told me that i needed to get onto apple and turn everything off

  • Query Governer Configuration Settings-URGENT

    Hi When I run my report,sometimes I get an error 'Not all rows have been retrieved.Data may be inaccurate'. Then i found out reason could be because of Query Governer settings (Tools->Options->Query Governer Tab)where i have checked option Limit retr

  • Reset user password using Apple ID

    I have a problem with resetting a forgotten administrator password in OS X Lion. I know that it is possible to reset the password with the Apple ID by typing in a wrong one 3 times at the login window. But what if I have allowed automatic login and t