KEFC - CO-PA External Data Transfer  - Data Storage

Hi everyone,
Does anyone knows how does KEFC transaction works and where does it stores the data uploaded ?
Thanks on any advice.

Press the "I" button at the top of the selection screen. The program is well documented.
Rob

Similar Messages

  • Is there an external data storage device for an IPAD? 64MB is not enough for me. . . o_O

    Is there an external data storage device for an IPAD? 64MB is not enough for me. . . o_O " HELP ! "

    There may be others.
    Here is an interesting product:
    http://www.airstash.com/
                                            Size & Weight                               
                                            Connectivity                               
                                            WiFi:                                                                
                                                    802.11b/g (54 Mbps max)                                       
                                              Range: 50m (160 ft) line of sight                                       
                                              Maximum simultaneous connections: 8                                       
                                              Configurable security: open and WEP; WPA available in upcoming firmware release                                       
                                                                            USB:                                                               
                                                    USB 2.0 High Speed (480 Mbps)                                       
                                                    USB Mass Storage Class                                       
                                                                            Power & Battery                                                               
                                                    Built-in rechargeable lithium polymer battery (non-replaceable)                                       
                                                    Charging via USB connector to computer or powered hub                                       
                                            Capacity                               
                                            SD / SDHC Card up to 32 GB (user supplied)                                                                                                         Compatibility                                                                                                        Wireless operation:                                                               
                                                    Web browser WiFi b/g capable device                                       
                                                    Optimized experience for iPhone, iPod touch, and iPad via HTML5                                       
                                                    No internet connection required                                       

  • External data storage for iPad

    I am a student and just purcased an iPad (due to arrive any day now eek!) to be able to order my textbooks in e-book format.
    The issue I am running into is non wifi data back up.  I don't want to keep the books on the actual iPad as the files are huge, but to keep them on iCloud or something similar on line limits my access when my WiFi at work goes down.  I did not have the money for a larger memory and cannot afford the 3G due to being college poor.  So, while the ability to store my textbooks on iCloud is a great start, what if I'm working and the wifi goes out? (It does often and I'm constantly breaking into our server room to reset it for patients who want to use their tablets or e-readers, but it doesn't always work and our IT people are not there overnight which is when I work). I was told the camera connector kit would work to store data on a flash drive or SD card, however, it won't. I was also told about iFlashdrive, but the price is way out of my league and it is merely a flash drive anyway.  I can't justify that cost.  Is there a cost effective way to store my textbook files for when I can't access the internet, at all?  This just does not seem very user friendly to me at the moment.

    Keep your eyes open for a device called the "ZoomIt" or "ZoomIt Reader".  It looks and acts similar to the Apple Camera Connection Kit, except that it allows you to access much more of the content on the SD/SDHC cards.  I bought one to use it for loading data files onto the micro-SDHC card for my GPSr and it works great using my iPhone 4.  I have places pictures, videos and PDF files on my SDHC cards and accessed them from my iPhone, so it might be able to get you closer to what you want.  The only problem I've seen lately is that these devices seem to be a premium to come by.  I paid about $39 for mine when I bought it new on Amazon, but the last time I looked, every retailer with them in stock was asking closer to $100 for them.
    If your app offers "open with" and "export" funcitonality, you can probably use this device to copy content onto or off from your iPad.  I can't imagine trying to get by without mine now that I've had it so long...

  • Time Maschine | FileVault | additional external data HDD

    Hi all
    At my companies macbook i'm using time maschine with FileVault enabled. I do my time maschine backups to an external HDD. In addition i have another HDD (Raid 0) connected to my macbook which contains additional data i whish to backup as well.
    The system backup is working well. My user foldes also is beeing backedup when i log out. Everything as expected.
    The additional external data HDD also is beeing backed up, as i wish to. But every now and then the backup of the external HDD is starting from scratch, which is annoying, since it contains about 600G of data.
    While backing up from scratch the old backup of the external data HDD is not going to be deleted by time maschine (until the backup-HDD is full). It seems to me, that the external data storage is seen like "one file", which needs to be backed up as a whole.
    It doesn't do that every time. Only every couple of times. In this state time maschine is not really useable for my data, which is bad.
    Any Ideas about this one ? I really would appreciate it
    Thanks,
    Stephan

    Hi all
    Some news on the topic. After the backup startet over and over again most of the time, i deactivated File Fault last weekend. After that, i did the whole backup from scratch (again). This now last for about a week or so. Right now, Time Mashine is doing the whole backup again. (All the 6xx GB). That is ******* annoying.
    Here that latest output from the logs:
    +Starting standard backup+
    +Backing up to: /Volumes/backup/Backups.backupdb+
    +Event store UUIDs don't match for volume: daten+
    +Node requires deep traversal:/Volumes/daten reason:kFSEDBEventFlagMustScanSubDirs|+
    +No pre-backup thinning needed: 793.57 GB requested (including padding), 1.10 TB available+
    +Copied 654 files (27.3 MB) from volume Macintosh HD.+
    One entry before that:
    +Starting standard backup+
    +Backing up to: /Volumes/backup/Backups.backupdb+
    +No pre-backup thinning needed: 1.43 GB requested (including padding), 1.10 TB available+
    +Backup requested due to disk attach+
    +Copied 3876 files (220.0 MB) from volume Macintosh HD.+
    +No pre-backup thinning needed: 1.18 GB requested (including padding), 1.10 TB available+
    +Copied 558 files (927 KB) from volume Macintosh HD.+
    +Starting post-backup thinning+
    +Deleted backup /Volumes/backup/Backups.backupdb/macbook stijink/2009-06-17-184212: 1.10 TB now available+
    +Deleted backup /Volumes/backup/Backups.backupdb/macbook stijink/2009-06-17-174206: 1.10 TB now available+
    +Deleted backup /Volumes/backup/Backups.backupdb/macbook stijink/2009-06-17-164321: 1.10 TB now available+
    +Deleted backup /Volumes/backup/Backups.backupdb/macbook stijink/2009-06-17-154654: 1.10 TB now available+
    +Post-back up thinning complete: 4 expired backups removed+
    +Backup completed successfully.+
    It seems to me, that Time Maschine is removing to many backups. Unnecessarily, since the backup disc still has 1,8 TB of free space.
    Could this even be a problem with the backup disc itself ? It is a WD MyBook configured to use RAID 0. See: http://www.amazon.com/Western-Digital-Book-Mirror-WDH2U20000N/dp/B001B8RSAK/ref= sr12?ie=UTF8&s=electronics&qid=1245398972&sr=8-2

  • CO-PA External Data Transfer (KEFC)

    Hello,
    I am using KEFC t-code for external data transfer into CO-PA. The company code currency is activated at Operating Concern level.
    So,  KEFC is creating  two records 1) record in USD  2) record in EUR (company code currency). 
    I am not able to figure out what exchange rate type it is using during the conversion.
    Any ideas.
    Thanks
    Sanjiv Agrawal

    Hi Sanjeev,
         Please refer to attached notes 508273 and 639180 and let me know if they help.
    Best Regards,
    Abhisek

  • Error in KEFC transaction - External Data Transfer

    I am getting this error while using external data transfer function using KEFC.
    Plan version is not supported -> check your entry
    Message no. KG 029
    Diagnosis
    Plan version"xx" has not been created in operating concern"xxxx"
    Procedure
    Transfer version"xx" to operating concern"xxxx" and maintain the attributes for that version.
    I have checked plan version settings. It has been created for operating concern as well. I am not sure how to resolve this. Any suggestion or help would be appreciated.

    Hi AP,
      Please check whether you defined a constant value for characteristic VERSI (Version) in the transfer rules for your sender structure. If you don't want to define a constant value there you have to assign a field from your external structure and fill the version in your external file. In this case please consider to fill the field in the following format '1  ' for version 1 (don't use '001').
      Please refer and implement note 576807 in your system if it is in your system . Also refer note  508273 for a possible list of problems in external data transfer.
    Best Regards,
    Abhisek

  • COPA exit COPA0007 for external data transfer

    Hello all,
    Have anyone already used COPA0007 Enhancement?
    Is ther any customizing that is needed in order to SAP stop execution with a break-point in the FM's associated.
    I'm trying to change data in external data transfer and I can not stop execution when running T-CODE KEFC.
    Best regards,
    Francisco Fontoura

    Hi,
      Please read note 508273.
    regards
    Waman

  • External data transfer into CO - Profitabilty Analysis tables

    Gurus, Sending this again as the earlier one was not answered. Please give us some insight ASAP.
    We are implementing the custom allocations to CO-PA (Profitability Analysis) records externally and trying to post close to million records into CO-PA table CE1xxxx. What is the most efficient method should be used for the posting of the externally created records into CO-PA table. Transaction KE21 is used for one entry at a time. We need to perform the mass data transfer. We also checked the BAPI BAPI_COPAACTUALS_POSTCOSTDATA. It clearly says that it is not for mass data transfer. Also, it updates the CE4xxxx table only. We need the data posted to CE1xxxx table. Any ideas!!!
    There is a transaction KEFC - External data transfer to CO-PA. Has anyone used it? Please provide your insight on this transfer method.
    Any suggestions are appreciated.
    Thank you.

    Ashish,
    We use KEFC on a regular basis to upload actual sales data to PA from a third system.
    An upload file is created in Excel, saved as a TXT file. The structure of that excel file is equal to the structure defined in customizing: define data interface to find the structure and: define structure of external data transfer to see the respective values of the columns you need in your excel file.
    Hope this works for you!
    Regards,

  • Any info about EDT (External Data transfer)

    Hi,
    I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
    Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer).
    Does some one know about EDT as data transfer tools ?
    Regards,
    Rajesh.

    Hi Rajesh,
    Please check this EDT online document.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CADATA/CADATA.pdf
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • External data Transfer - Loan Module (t.code - KCLJ)

    Hi Expert
    I have upload the loan source data through t.code KCLJ.  and it showing me External data transfer completed with return code: 4. there is no error but no loan is created in server and also tables is not updated. is there any further step to update a loan transaction through EDT. i  read SAP documentation here it's show that data saved in data pool. Please tell me what's the next step to update the loan data.
    Please  help
    Regards
    Gaurav Gupta

    Hi, how are you? My name is Santiago, I'm working in KCLJ trx. and I'm trying to upload my file, but I cant. Cuoud you fix your error? Do you have any documentation or an example of your file?
    thanks
    Santiago

  • FCHX - External data transfer  file format

    FCHX - External data transfer  creates a one line row of AP checks. I need to convert this flat file to bank format specifications. I have a program to do this. My problem is how do I convert the one line row into multiple line rows so I can use this in my conversion program.

    Hi Kotta
    What for you have created structure? is it for BP or IO or CA?
    These are the Std structures provided by SAP for loading master data:
    rkct994 - BCA Insurance SENDER
    rkct995 - Insurance Object
    rkct996 - Contract Data
    rkct997 - Partner Data SENDER
    All these structures contains AKTYP field in it.
    Can you post more details.

  • I have 2 different iCloud accounts and would like to delete the account where I have purchased paid for extra iCloud data storage.  Can I transfer this additional storage over to my other account?

    I have 2 different iCloud accounts and would like to delete the account where I have paid for extra iCloud data storage.  Can I transfer the data storage over to my other account?  I am trying to get my iCloud and Apple account with same user name.

    You'll have to contact Apple about that.
    Their iCloud support page indicates you cannot merge or transfer iCloud accounts.
    What do you mean by, I am trying to get my iCloud and Apple account with same user name.

  • COPA : External data transfer

    Dear Guru`s,
    While executing KEFC t-code to upload external data into COPA,system it is showing error.
    Below are the screen shots attached..
    Regards
    Nitisha

    Hi Nitisha
    I believe this has something to do with the format or the values (content) of the file you are trying to upload.
    Check the following link too and see if you get any pointers to help resolve your issue
    Error executing transaction KEFC
    Issue with KEFC transaction
    Error in KEFC transaction
    Hope its helpful
    Regards
    Mustafa

  • Loans Managements - Externa Data Transfer.

    Hi Expert.
    I need help you.
    I need create loans with their conditions.
    How use the transactions of Externa Data Transfer.
    You have information complete for use this tools EDT.

    Hi,
    The process of Migration with the Tool EDT was successful..!!!
    Thanks..!!!
    Edited by: arrova on Sep 22, 2010 6:14 PM

  • Use an external HD with Airport Extreme to access it for data storage from computers  connected to the WiFi network?

    Can I connect My Passport HD into my Airport Extreme's USB port to access it from my computers (27" iMac 2012 now using Yosemite) on that Wifi network for data storage and retrieval purposes?

    Yes, if the AirPort base station's hardware supports 802.11n. The drive needs to be formatted as Mac OS Extended (Journaled), FAT16, or FAT32, and may need to be connected through an USB hub with its own power supply.
    (117777)

Maybe you are looking for

  • What is the benefit of Using Data Adaptor

    Hello I wonder that What is the benefit of Using Data Adaptor ? I don't know TopLink Technology , inorder to using Data Adaptor I should know toplink but what is the advatages of using BPEL database adaptors in conditions thet I can make webservices

  • Unable to add a special character in the rskc

    Hi I want to add the degree symbol like how it will come when we will write : 36degree [that small circle]. Please suggest how to add i am trying by coping that from a word file but failed. Regards Vismark

  • Excel 2010 "Save As" happens twice

    In Excel 2010, whenever I choose "Save As", it starts normally and performs the requested change. However, it then repeats itself as if I performed the "Save As" a second time. This does not happen in the other Office 2010 Pro Plus components. Does a

  • Items Sold Report

    We would like to create a report that shows how many items we have sold and percentage of each size sold in a specific color combination. We are a clothing company so ideally this report can be in a matrix format for a particular style -- showing the

  • Uninstall adobe pro 9.

    I have adobe pro 9 & 11 installed.  9 installed fine but 11 wasn't a smooth transition.  Both seemed to work until yesterday.  Suddenly I could no longer open a PDF file through either Firefox or Safari.  Firefox has also crashed on me a few times.