Ken Burns for slide shows?

Why isn't there a Ken Burns affect for slide shows?  This should have been in Lightroom 3!

You're right.

Similar Messages

  • Hi, I made a slide show with music from 81 photos I downloaded from my camera.  I would like to burn these to a blank DVD, but there appears to be no utility for export to a DVD for slide shows.  Help.  I want to distribute DVD copies to classmates

    Hi, I made a slide show with music from 81 photos I downloaded to iphoto from my camera.  I would like to burn the slide show to DVD, but can't make this happen.  How do I go about doing this? 

    If the DVD is to play on a DVD Player, then Share -> Send to iDVD as iDVD is the only app that creates the correct file structure and format for this purpose.
    If the DVD is just to hold the file, then Export to the desktop and burn with the Finder.
    Regards
    TD

  • I am using IDVD to make slide shows.  The pictures are clear and of good quality.  When I burn the slide show to a disk, the pictures are blurry and of poor quality.  Is there a setting for quality of picture in burning a disk?

    I am using IDVD to make slide shows.  The pictures are clear and of high quality when viewed on my computer.  When I burn the slide show to a disk, the pictures are blury and of poor quality.  Is there a setting adjustment to correct this problem?

    I would re-post in the iDVD forum.  You are likely to get a faster answer there.  Good luck.

  • I am using using IDVD to create slide shows.  When viewed on my computer the pictures are clear and of high quality.  When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

    I am using IDVD to create slide shows.  When viewed on my computer, the pictures are clear and of high quality.  When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality.  Is there a setting that controls the quality of the burn and if there is, where do I find it?  Thank you.

    The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

  • How can I burn a slide show to a dvd?

    I have tried, every way, possible to burn a slide show with music to a dvd and I did so successfully except that it will only play in a play station 3 unit and not correctly play on any computer or dvd player. I have tried several ways:
    -Creating it as an image saving it to my desktop and burning it from disk utilities
    -Creating it in iDVD and burning it that way
    I AM using a DVD-R
    So, again it will play in the playstation but not on dvd players
    WHAT CAN I DO??
    When I burned it using the whole image thing & disc utilities, it burned the slide show correctly but NO music. I would really appreciate your help

    Sorry, was trying to get all of these.
    Have a look at these for help:
    http://discussions.apple.com/thread.jspa?threadID=967804&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=7814936&#7814936
    http://discussions.apple.com/thread.jspa?messageID=7503940&#7503940
    http://discussions.apple.com/thread.jspa?messageID=9312008&#9312008

  • After burning a slide show, I get a skip in audio

    After burning a slide show, II get a skip in the audio about every 5 min. of run time.  I imported the pictures from i photo and the music from an itunes play list. When I play the entire thing in preview it runs fine with no problems, but after burning to a dvd, I get a skip every 5 min.  I burned to hp DVD-R (16x) and Memorex DVD-R (16x).  Still the skip.  I have burned to Best preformance, High Quality and Professional Quality.  I have even slowed the burn time to 4x.  Still the skip.  I noticed the bar at the bottom of the screen always reads 5 min. for the audio duration and when it goes back to 0 is when it skips.   The run time when I put the cursor on the audio well reads the correct 3min:35sec. 

    SlideShow function in iDVD - is limited to 99 photos per show.
    Creating the SlideShow in iMovie HD6 or FinalCut - doesn't limit this but offers 100% control over process (audio and transitions)
    Using iMovie'08 or 09 or 11 - will degrade picture quality as they only deliver every second line over to iDVD.
    I never use "Share to iDVD" in any iMovie version.
    • iMovie up to HD6 - Just close it and import movie project from within iDVD
    • iMovie'08 to 11 - "Share to Media Browser" and as Large (not HD) will give as good quality as they can do
    Yours Bengt W

  • No music when i burn my slide show to dvd in idvd

    I selected the share to burn I slide show. This opened the idvd and transfered the info to it. I was able to burn a dvd, but the music did not transfer.
    I am not able to open and edit the drop box to add music. I dont know what to try. Thanks.

    Thanks so much for your possible solution. If I can pull this off , I will no longer curse adobe PSE 13.
    I'm still a long was off to accomplish this goal but I will surely give it a try. H264 (mp4) is still Greek to me.

  • Using downloaded songs for slide show background music

    Maybe I am naive, but I just joined iTunes and downloaded some music to use as background for slide shows of family pics. I am using Microsoft Plus! to put the slide shows together. The iTunes songs downloaded in MPEG-4 and the Plus! code will only recognize MP3. I am also concerned that the copyright protection will make the songs not useable for the slide show compilations. Any ideas? Thanks!

    In iTUnes you can burn the song to CD then reimport it as a MP3. Goto edit>preferences>advanced tab>Import sub tab, and set it from "AAC" to "MP3" then hit OK
    Now burn the songs to CD in itunes. Put the CD back in and hit the "Import" button in the top right corner of itunes

  • Is it possible to burn a slide show onto a Blu-ray DVD ?

    Using PS8 Premier I could't burn my slide show ( no movies ) with music onto a Blu-ray DVD. The problem seems to be......low memory. ( my computer has 2 Gig but my project which doesn't seem that involved has over 4 or 5 Gig ). The reason I want to burn onto Blu-ray is to get a clearer project than I was able to on a regular DVD. I get a good slide show on my cpu monitor and also on a regular DVD in the smaller screen of the burner program but the project loses resolution when going to full screen. That is why I wanna try it on Blu-ray.

    If you are going to BD, then I would start with a BD Preset. This ARTICLE will tell you the supported Frame Sizes, and FPS.
    I would choose the 1920 x 1080 @ 29.97 FPS Interlaced (NTSC), or 25 FPS Interlaced (PAL). I would then go to my original stills and Scale them to ~ 1920 x 1080 in PS/PSE. This ARTICLE will give you tips on doing that with automation in either image editing program. Import those Scaled Images into PrE, with the Duration that you feel is correct, depending on the "flow" of the SlideShow. Note: you can tweak that Duration for each Image, if needed, but by planning a bit, most will not need any tweaking. Then, add any Pans, or Zooms (Effect>Motion>Scale, and/or Motion>Position). Add any Transitions desired, and edit any Audio. Add the desired BD Menus and Chapter Markers (no Stop Marker at the end of the Timeline). This Project should burn to BD easily.
    Good luck, and hope that it helps,
    Hunt
    Note: in the first linked article, you will see that 20 FPS is not supported, and neither is 1 FPS. You can, of course, make the Duration of each Image 1 Frame, but will probably want the Image on-screen for longer, say 5 - 10 secs.

  • Burn a slide show

    How can I burn a slide show to a DVD playable on a DVD palyer and a TV?

    Thanks, that helped a lot. iPhoto 5 was already installed on this refurbished iMac and other than this one topic I don't plan to make a great deal of use of iphoto-that's why 5.1.4, and I asked in the 08 iDVD forum because the version of iDVD on my Mac Book Pro is newer,7.0.4 so I would assume more knowledge for burning the DVD could be found here, I didn't realize that someone would take offense at my using an old version of iphoto, but would appreciate it if you actually know something about the subject[missing fotos in a slide show] to share your experience-that is the reason for these forums and the moderator would have moved my message if it was totally off topic. Again, thanks for your help?

  • How do I burn a slide show to a DVD?

    When I burn a slide show I created on Photoshop Elements 11 to a DVD using Premier Elements 11, only the botton half of the photos are copied.  How do I correct this?

    drfsf
    There is a problem with 1/2 wmv display related to a recent Windows Update kb. The issue is highlighted in the Announcement at the topic of this forum and has been discussed in numerous threads here. For your convenience, the Announcement looks like the following:
    Announcement: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these Windows Updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
      by Bill Hunt (Aug 2, 2013)
    The general suggestions in the threads have included
    a. For now, set up Windows Updates to require notification and your approval before any downloading and installing of them.
    b. If you catch the offending Windows Update kb in the Important Updates, right click it and select Hide. That is supposed to keep it gone.
    Your problem mostly likely popped up when you selected a route that involved the transfer of the slideshow as a .wmv file. You should be OK after deleting the indicated Windows Update kb. But, consider using the Photoshop Elements Slideshow Editor Output option Edit With Premiere Elements which sends the slideshow over to Premiere Elements in a non wmv format. If you go this route, the slideshow can be broken apart for further significant edits with the Break Apart Elements Organizer Slideshow command.
    Please review. If any questions, please do not hesitate ot ask.
    Thanks.
    ATr

  • Video adapter only works for slide shows.

    We received the Apple video adapter today. It appears that it only works for slide shows? It might also work for Keynote, but we don't use that much and haven't installed on the iPad. For our purposes, we'd like to be able to display from other programs- Numbers, Pages, and a PDF reader. This seems counterintuitive to business use if the adaptor isn't fully functional. We are hoping that a software upgrade will make the adaptor functional.

    The iPad Dock Connector to VGA Adapter can play content to a VGA display when using the following apps:
    Videos
    Photos—Slideshow playback only
    YouTube
    Keynote
    Safari—Video content on webpages
    Whether Apple will add additional support in the future is unknown, but you can indicate your interest to Apple via their feedback page:
    http://www.apple.com/feedback/ipad.html
    Regards.

  • Burning a slide show on DVD

    I've created a slide show in iPhoto using a song which plays 2 1/2 times. When I try to burn the slide show on to a DVD It only plays the song once and stops. How do I burn the slide show at its full length?

    As per my understanding, you created a slideshow in PSE organizer and now want to burn into DVD using Output dialog which launches PRE...
    Which application crashes and at which step??
    Through PSE you can output the video into PDF or Video...

  • Import subtitles for slide show

    I have two slide shows, each with 50 slides. I would like to generate a text file with the subtitle definitions and import it, but apparently subtitles can only be imported for timelines. Why is that?
    I have the names of the slides (the texts that should be displayed as subtitles) in an excel file and generated a text file out of it that has exactly the format needed for importing subtitles.
    It would be rather time consuming to manually copy the names of the 100 slides out of the Excel sheet and insert them as a description for each slide.
    Are there any technical reasons why importing subtitles for slide shows is not allowed?
    Regards,
    Christian Kirchhoff

    Hallo,
    thanks again for the reply. In one case I really could do it, you are right there.
    But there are slide shows, too, which do not proceed automatically but wait for the user to press the previous/next chapter buttons on the remote control. To realize the same behaviour in a timeline one had to set the end action for a chapter to "return to beginning of chapter". That works, kind of, but I found out that both with software DVD players on a computer and with regular DVD players the navigation (forward/backward) is very...irregular. Sometimes when you press the next chapter button it works, and sometimes not.
    That's why I wanted to stick with the slide show instead of a timeline.
    Regards,
    Christian

  • Pdf for slide shows

    When I create a slideshow in Photoshop Elements .pdf is my preferred file format  to save the show.
    One of the nice features of .pdf for slide shows is the 'fade out /fade in' transition between slides, which has been functioning on my laptop, even if slide changing was set to manual.
    I recently downloaded Acrobat Reader for iPAD. Although slide changing was no problem the 'fade out /fade in' effect was gone. Is there any way I could get it back?

    No transitions and multimedia on Adobe Reader for iOS.

Maybe you are looking for