Kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)
I own a Compaq Mini. Since kernel26 update to 2.6.30.4-1 my ethernet card won't work anymore. I used sky2 modul. My wlan card uses broadcom-wl driver from AUR so I disabled !b43 !b44 !ssb in modules. Wlan-Card is now eth0 and there is any other nethwork card. What can I do instead of wait and drink a cup of tea ?!?
Last edited by Amnon82 (2009-08-08 09:09:42)
I downgraded back to 2.6.30.1 and it works again ... Weird!
[phil@phils-netbook ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
[phil@phils-netbook ~]$ dsmesg | grep sky2
bash: dsmesg: Kommando nicht gefunden.
[phil@phils-netbook ~]$ dmesg | grep sky2
sky2 driver version 1.22
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:02:00.0: irq 26 for MSI/MSI-X
sky2 eth0: addr 00:24:81:38:00:01
sky2 eth0: enabling interface
sky2 eth0: disabling interface
sky2 eth0: enabling interface
[phil@phils-netbook ~]$ dmesg | grep wl
wl: module license 'Mixed/Proprietary' taints kernel.
wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
wl 0000:01:00.0: setting latency timer to 64
eth1 (wl): not using net_device_ops yet
[phil@phils-netbook ~]$ pacman -Q kernel26
kernel26 2.6.30.1-1
[phil@phils-netbook ~]$
Last edited by Amnon82 (2009-08-07 23:30:36)
Similar Messages
-
[Solved] Kernel BUG at include/linux/netdevice.h:501, and sky2?
So, ever since a certain point in time between kernel 3.11.x and now (3.12.5-1), I have been getting this strangely inconsistent error on bootup. I would estimate that about 3 out of every 4 reboots leads to this error message, and the bootup process terminates in a black screen and what (appears) to be a system hang. However I CTL+ALT+F2, log in, and I output dmesg to a boot log, and everything my eyes have seen is now your visual property as well. The remaining 25% of my reboots patches through and boots directly to my window manager successfully. Now the output seems to be screaming to me "sky2 is the culprit", as EIP seems to be pointing in its general direction at the time of error. However, I am more inclined to believe that my hardware's interaction with the driver is more likely to be responsible. If sky2 was actually a real problem, I doubt I would be the only one complaining about this. Nonetheless, I am quite vexed, and would greatly appreciate anbody's help here. Much appreciated, and perhaps I can provide you with some other (perhaps) useful information:
MotherBoard: Asus P5KE (with suspect ethernet controller built in)
Ethernet Controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Kernel: 3.12.5-1
CPU: Dual core 2.33 ghz
RAM: 2GB (recently has not passed a memtest)
[ 9.699863] sky2: driver version 1.30
[ 9.699960] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 9.700020] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
[ 9.700498] ------------[ cut here ]------------
[ 9.703391] kernel BUG at include/linux/netdevice.h:501!
[ 9.703391] invalid opcode: 0000 [#1] PREEMPT SMP
[ 9.703391] Modules linked in: sky2(+) i2c_core snd_hda_codec_analog acpi_cpufreq processor button snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore shpchp intel_agp asus_atk0110 intel_gtt agpgart ext4 crc16 mbcache jbd2 sd_mod hid_logitech ff_memless usbhid hid firewire_ohci ahci libahci firewire_core crc_itu_t libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common
[ 9.703391] CPU: 0 PID: 155 Comm: dhcpcd Not tainted 3.12.5-1-ARCH #1
[ 9.703391] Hardware name: System manufacturer P5K-E/P5K-E, BIOS 0906 12/10/2007
[ 9.703391] task: f562f4d0 ti: f50fa000 task.ti: f50fa000
[ 9.703391] EIP: 0060:[<fa99372f>] EFLAGS: 00010246 CPU: 0
[ 9.703391] EIP is at sky2_setup_irq+0x9f/0xb0 [sky2]
[ 9.703391] EAX: 00000000 EBX: f51c8100 ECX: 00000089 EDX: 00000000
[ 9.703391] ESI: f5dfb000 EDI: 00000000 EBP: f50fbdf0 ESP: f50fbdd8
[ 9.703391] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 9.830016] sky2 0000:02:00.0 eth0: addr 00:1b:fc:61:1c:91
[ 9.830018] CR0: 80050033 CR2: f9133760 CR3: 356f4000 CR4: 000007d0
[ 9.830018] Stack:
[ 9.830018] 00000000 f51b1000 f51c8100 f51b1000 f51c8100 00000000 f50fbe2c fa996169
[ 9.830018] 00000020 00000000 c1007210 00000400 f51b15b4 00000000 f50fbe1c c1007210
[ 9.830018] f51b1500 000000e0 f51b1000 fa999f40 00000000 f50fbe50 c135ed4b 00000246
[ 9.830018] Call Trace:
[ 9.830018] [<fa996169>] sky2_open+0x309/0x360 [sky2]
[ 9.830018] [<c1007210>] ? via_no_dac+0x40/0x40
[ 9.830018] [<c1007210>] ? via_no_dac+0x40/0x40
[ 9.830018] [<c135ed4b>] __dev_open+0x9b/0x120
[ 9.830018] [<c1431cbe>] ? _raw_spin_unlock_bh+0x1e/0x20
[ 9.830018] [<c135efd9>] __dev_change_flags+0x89/0x150
[ 9.830018] [<c135f148>] dev_change_flags+0x18/0x50
[ 9.830018] [<c13bb8e0>] devinet_ioctl+0x5d0/0x6e0
[ 9.830018] [<c13bcced>] inet_ioctl+0x6d/0xa0
[ 9.830018] [<c1346094>] sock_ioctl+0x114/0x250
[ 9.830018] [<c1345f80>] ? sock_fasync+0x80/0x80
[ 9.830018] [<c1166416>] do_vfs_ioctl+0x2e6/0x4e0
[ 9.830018] [<c1435127>] ? __do_page_fault+0x2e7/0x580
[ 9.830018] [<c11576f6>] ? __fput+0x106/0x1f0
[ 9.830018] [<c116668f>] SyS_ioctl+0x7f/0x90
[ 9.830018] [<c143874d>] sysenter_do_call+0x12/0x28
[ 9.830018] Code: 8d 74 26 00 8b 86 d8 01 00 00 83 c6 64 89 34 24 c7 44 24 04 91 97 99 fa 89 44 24 08 e8 fb d1 95 c6 89 f8 83 c4 0c 5b 5e 5f 5d c3 <0f> 0b eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 53
[ 9.830018] EIP: [<fa99372f>] sky2_setup_irq+0x9f/0xb0 [sky2] SS:ESP 0068:f50fbdd8
[ 10.114977] ---[ end trace 6853181d11e5e45a ]---
[ 10.121597] [drm] Initialized drm 1.1.0 20060810
[ 10.598013] nvidia: module license 'NVIDIA' taints kernel.
[ 11.366133] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251)
[ 11.372053] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 11.389363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.436774] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 11.449056] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 11.461240] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 11.473379] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 11.485835] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 11.498462] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 11.510829] NVRM: loading NVIDIA UNIX x86 Kernel Module 331.20 Wed Oct 30 16:59:55 PDT 2013
[ 11.523659] iTCO_vendor_support: vendor-support=0
[ 11.539930] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 11.714329] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[ 11.727418] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 11.740101] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 11.753434] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.767642] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[ 11.781056] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 12.042064] coretemp coretemp.0: Using relative temperature scale!
[ 12.055598] coretemp coretemp.0: Using relative temperature scale!
[ 14.944832] systemd-journald[110]: File /var/log/journal/2e32c4787d3945018666d6257394d8b8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 18.610023] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X
[ 19.320584] NVRM: Your system is not currently configured to drive a VGA console
[ 19.320590] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 19.320593] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 19.320595] NVRM: drivers including, but not limited to, vesafb, may result in
[ 19.320597] NVRM: corruption and stability problems, and is not supported.
Last edited by eazar001 (2014-01-24 22:02:50)UPDATE: So I ran some low level troubleshooting and decided to test out the linux-lts (3.10.24-1-lts) kernel. No problems at all. Everything works fine with my ethernet adapter and the sky2 module. It just appears that something occurred in the newer kernels to break the interface for at least one Marvell adapter. This solution works for now, but I suppose I should file a bug report eventually. In the meantime, any insight is welcome.
-
Kernel 3.0.4-1 with sky2 ethernet driver - VLAN problem
Hello,
after installing kernel 3.0.x (any) VLANs stopped working on sky2 driver. Althoug I can add VLAN to interface, i can't ping anything. Tcpdump does not register any traffic on tagged interface.Of course normal (untagged) traffic works without any problems. Everything was fine with 2.6.39 kernels. Under kernel26-lts (2.6.32) everything works perfect.
Some technical details:
lspci |grep Ethe
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
dmesg |grep sky2
[ 7.622893] sky2 driver version 1.25
[ 7.623017] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7.623055] sky2 0000:06:00.0: setting latency timer to 64
[ 7.623176] sky2 0000:06:00.0: Yukon-2 FE+ chip revision 0
[ 7.623735] sky2 0000:06:00.0: irq 28 for MSI/MSI-X
[ 7.624179] sky2 eth0: addr e8:11:32:09:79:67
[ 3959.669643] sky2 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 3959.669774] sky2 0000:06:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
[ 3959.669818] sky2 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc600004)
[ 3959.669841] sky2 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3959.669879] sky2 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[24962.224924] sky2 eth0: enabling interface
RegardsNo: you have a different issue as this thread is old. Please don't necrobump:
https://wiki.archlinux.org/index.php/Fo … Bumping.27
Closing -
Xen Kernel randomly fails to load and goes out of range
Been having an on/off issue lately that requires a hard reset of my system. Essentially what happens is the system begins to load when my monitor reports an error that the signal is out of range. I try to pretend login and reboot, but it does not work. Instead, I am forced to simply reset the system and once reset it appears to boot OK without any issues. In fact I can go a few reboots before once again it decides to break. Below is what should be one of the logs from a failed boot, in fact, the system is in this same failed state right now as well.
arch_1 ~ :( # journalctl -b -1
-- Logs begin at Sat 2013-12-28 00:39:50 EST, end at Thu 2014-01-02 23:28:03 EST. --
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 332.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 336.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuset
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpu
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuacct
Jan 02 23:22:36 arch_1 kernel: Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SM
Jan 02 23:22:36 arch_1 kernel: Command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console=tty0
Jan 02 23:22:36 arch_1 kernel: Freeing 9e-100 pfn range: 98 pages freed
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on 9e->100
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on bd9ff->100000
Jan 02 23:22:36 arch_1 kernel: Released 98 pages of unused memory
Jan 02 23:22:36 arch_1 kernel: Set 271971 page(s) to 1-1 mapping
Jan 02 23:22:36 arch_1 kernel: Populating 80000-80062 pfn range: 98 pages added
Jan 02 23:22:36 arch_1 kernel: e820: BIOS-provided physical RAM map:
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000100000-0x00000000bd9fefff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000100000000-0x0000000237ffffff] usable
Jan 02 23:22:36 arch_1 kernel: NX (Execute Disable) protection: active
Jan 02 23:22:36 arch_1 kernel: SMBIOS 2.5 present.
Jan 02 23:22:36 arch_1 kernel: DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A10 12/20/2010
Jan 02 23:22:36 arch_1 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan 02 23:22:36 arch_1 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jan 02 23:22:36 arch_1 kernel: No AGP bridge found
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: Scanning 1 areas for low memory corruption
Jan 02 23:22:36 arch_1 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00000000-0x000fffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7fe00000-0x7fffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b47000, 0x01b47fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b48000, 0x01b48fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7c000000-0x7fdfffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b49000, 0x01b49fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4a000, 0x01b4afff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4b000, 0x01b4bfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4c000, 0x01b4cfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00100000-0x7bffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x80000000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x80000000-0xbd9fefff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x100000000-0x237ffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: RAMDISK: [mem 0x01f54000-0x029fefff]
Jan 02 23:22:36 arch_1 kernel: ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
Jan 02 23:22:36 arch_1 kernel: ACPI: XSDT 00000000000fc7d7 00084 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACP 00000000000fc907 000F4 (v03 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DSDT 00000000ffe9e423 05744 (v01 DELL dt_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACS 00000000bd9ffc00 00040
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000ffea3d30 00087 (v01 DELL st_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: APIC 00000000000fc9fb 00092 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: BOOT 00000000000fca8d 00028 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: ASF! 00000000000fcab5 00096 (v32 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: MCFG 00000000000fcb4b 0003C (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET 00000000000fcb87 00038 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: TCPA 00000000000fcde3 00032 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DMAR 00000000000fce15 00108 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bd9ffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: NUMA turned off
Jan 02 23:22:36 arch_1 kernel: Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
Jan 02 23:22:36 arch_1 kernel: Initmem setup node 0 [mem 0x00000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: NODE_DATA [mem 0x7f0c7000-0x7f0cbfff]
Jan 02 23:22:36 arch_1 kernel: Zone ranges:
Jan 02 23:22:36 arch_1 kernel: DMA [mem 0x00001000-0x00ffffff]
Jan 02 23:22:36 arch_1 kernel: DMA32 [mem 0x01000000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: Normal [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: Movable zone start for each node
Jan 02 23:22:36 arch_1 kernel: Early memory node ranges
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00001000-0x0009dfff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00100000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: On node 0 totalpages: 2054556
Jan 02 23:22:36 arch_1 kernel: DMA zone: 64 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA zone: 21 pages reserved
Jan 02 23:22:36 arch_1 kernel: DMA zone: 3997 pages, LIFO batch:0
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 12072 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 772607 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: Normal zone: 19968 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: Normal zone: 1277952 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: ACPI: PM-Timer IO Port: 0x808
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Jan 02 23:22:36 arch_1 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan 02 23:22:36 arch_1 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ0 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ2 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ9 used by override.
Jan 02 23:22:36 arch_1 kernel: Using ACPI (MADT) for SMP configuration information
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Jan 02 23:22:36 arch_1 kernel: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
Jan 02 23:22:36 arch_1 kernel: nr_irqs_gsi: 40
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Jan 02 23:22:36 arch_1 kernel: Booting paravirtualized kernel on Xen
Jan 02 23:22:36 arch_1 kernel: Xen version: 4.3.1 (preserve-AD)
Jan 02 23:22:36 arch_1 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
Jan 02 23:22:36 arch_1 kernel: PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s86464 r8192 d24128 u262144
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Jan 02 23:22:36 arch_1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022431
Jan 02 23:22:36 arch_1 kernel: Policy zone: Normal
Jan 02 23:22:36 arch_1 kernel: Kernel command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console
Jan 02 23:22:36 arch_1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 02 23:22:36 arch_1 kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
Jan 02 23:22:36 arch_1 kernel: software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff880072a00000-
Jan 02 23:22:36 arch_1 kernel: Memory: 1857868K/8218224K available (5124K kernel code, 807K rwdata, 1628K roda
Jan 02 23:22:36 arch_1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan 02 23:22:36 arch_1 kernel: Preemptible hierarchical RCU implementation.
Jan 02 23:22:36 arch_1 kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jan 02 23:22:36 arch_1 kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jan 02 23:22:36 arch_1 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
Jan 02 23:22:36 arch_1 kernel: NR_IRQS:8448 nr_irqs:512 16
Jan 02 23:22:36 arch_1 kernel: xen: sci override: global_irq=9 trigger=0 polarity=0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 9 triggering 0 polarity 0
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=9 -> irq=9 (gsi=9)
Jan 02 23:22:36 arch_1 kernel: xen: acpi sci 9
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=1 -> irq=1 (gsi=1)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=2 -> irq=2 (gsi=2)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=3 -> irq=3 (gsi=3)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=4 -> irq=4 (gsi=4)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=5 -> irq=5 (gsi=5)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=6 -> irq=6 (gsi=6)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=7 -> irq=7 (gsi=7)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=8 -> irq=8 (gsi=8)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=10 -> irq=10 (gsi=10)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=11 -> irq=11 (gsi=11)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=12 -> irq=12 (gsi=12)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=13 -> irq=13 (gsi=13)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=14 -> irq=14 (gsi=14)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=15 -> irq=15 (gsi=15)
Jan 02 23:22:36 arch_1 kernel: Console: colour VGA+ 80x25
Jan 02 23:22:36 arch_1 kernel: console [tty0] enabled
Jan 02 23:22:36 arch_1 kernel: allocated 33030144 bytes of page_cgroup
Jan 02 23:22:36 arch_1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 02 23:22:36 arch_1 kernel: Xen: using vcpuop timer interface
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 0
Jan 02 23:22:36 arch_1 kernel: tsc: Detected 2992.224 MHz processor
Jan 02 23:22:36 arch_1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5986
Jan 02 23:22:36 arch_1 kernel: pid_max: default: 32768 minimum: 301
Jan 02 23:22:36 arch_1 kernel: Security Framework initialized
Jan 02 23:22:36 arch_1 kernel: AppArmor: AppArmor disabled by boot time parameter
Jan 02 23:22:36 arch_1 kernel: Yama: becoming mindful.
Jan 02 23:22:36 arch_1 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 02 23:22:36 arch_1 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 02 23:22:36 arch_1 kernel: Mount-cache hash table entries: 256
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys memory
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys devices
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys freezer
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys net_cls
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys blkio
Jan 02 23:22:36 arch_1 kernel: CPU: Physical Processor ID: 0
Jan 02 23:22:36 arch_1 kernel: CPU: Processor Core ID: 0
Jan 02 23:22:36 arch_1 kernel: mce: CPU supports 2 MCE banks
Jan 02 23:22:36 arch_1 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Jan 02 23:22:36 arch_1 kernel: Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
Jan 02 23:22:36 arch_1 kernel: ACPI: Core revision 20130725
Jan 02 23:22:36 arch_1 kernel: ACPI: All ACPI Tables successfully acquired
Jan 02 23:22:36 arch_1 kernel: ftrace: allocating 20318 entries in 80 pages
Jan 02 23:22:36 arch_1 kernel: Performance Events: unsupported p6 CPU model 23 no PMU driver, software events
Jan 02 23:22:36 arch_1 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 1
Jan 02 23:22:36 arch_1 kernel: Brought up 2 CPUs
Jan 02 23:22:36 arch_1 kernel: devtmpfs: initialized
Jan 02 23:22:36 arch_1 kernel: PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
Jan 02 23:22:36 arch_1 kernel: xen:grant_table: Grant tables using version 2 layout
Jan 02 23:22:36 arch_1 kernel: Grant table initialized
Jan 02 23:22:36 arch_1 kernel: RTC time: 4:22:33, date: 01/03/14
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 16
Jan 02 23:22:36 arch_1 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PCI registered
Jan 02 23:22:36 arch_1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Jan 02 23:22:36 arch_1 kernel: PCI: Using configuration type 1 for base access
Jan 02 23:22:36 arch_1 kernel: dmi type 0xB1 record - unknown flag
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-0> at 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Module Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: EC: Look up EC in DSDT
Jan 02 23:22:36 arch_1 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Jan 02 23:22:36 arch_1 kernel: ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Interpreter enabled
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 02 23:22:36 arch_1 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 02 23:22:36 arch_1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and rep
Jan 02 23:22:36 arch_1 kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only par
Jan 02 23:22:36 arch_1 kernel: PCI host bridge to bus 0000:00
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
Jan 02 23:22:36 arch_1 kernel: DMAR: Forcing write-buffer flush capability
Jan 02 23:22:36 arch_1 kernel: DMAR: Disabling IOMMU for graphics on this chipset
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: PME# supported from D3hot
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7880000-0xf789ffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xf78a0000-0xf78bffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7900000-0xf791ffff pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf78c0000-0xf78dffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x14: [mem 0xf78e0000-0xf78fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x18: [io 0xdce0-0xdcff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: [1102:0007] type 00 class 0x040100
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: reg 0x10: [io 0xcce0-0xccff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: supports D1 D2
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: Enabled 2 GPEs in block 00 to 3F
Jan 02 23:22:36 arch_1 kernel: ACPI: \_SB_.PCI0: notify handler is installed
Jan 02 23:22:36 arch_1 kernel: Found 1 acpi root devices
Jan 02 23:22:36 arch_1 kernel: xen:balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: xen_balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jan 02 23:22:36 arch_1 kernel: vgaarb: loaded
Jan 02 23:22:36 arch_1 kernel: vgaarb: bridge control possible 0000:00:02.0
Jan 02 23:22:36 arch_1 kernel: PCI: Using ACPI for IRQ routing
Jan 02 23:22:36 arch_1 kernel: PCI: pci_cache_line_size set to 64 bytes
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0xbd9ff000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: NetLabel: Initializing
Jan 02 23:22:36 arch_1 kernel: NetLabel: domain hash size = 128
Jan 02 23:22:36 arch_1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jan 02 23:22:36 arch_1 kernel: NetLabel: unlabeled traffic allowed by default
Jan 02 23:22:36 arch_1 kernel: Switched to clocksource xen
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI init
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP registered
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0800-0x085f] could not be reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0c00-0x0c7f] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0860-0x08ff] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: [dma 4]
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 13 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 8 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 6 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: [dma 2]
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI: found 7 devices
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP unregistered
Jan 02 23:22:36 arch_1 kernel: PM-Timer failed consistency check (0xffffff) - aborting.
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 1 [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 2
Jan 02 23:22:36 arch_1 kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP: Hash tables configured (established 65536 bind 65536)
Jan 02 23:22:36 arch_1 kernel: TCP: reno registered
Jan 02 23:22:36 arch_1 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 1
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: Boot video device
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=16 -> irq=16 (gsi=16)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=17 -> irq=17 (gsi=17)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=22 -> irq=22 (gsi=22)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=23 -> irq=23 (gsi=23)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=18 -> irq=18 (gsi=18)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: PCI: CLS 64 bytes, default 64
Jan 02 23:22:36 arch_1 kernel: Unpacking initramfs...
Jan 02 23:22:36 arch_1 kernel: Freeing initrd memory: 10924K (ffff880001f54000 - ffff8800029ff000)
Jan 02 23:22:36 arch_1 kernel: Simple Boot Flag at 0x7a set to 0x1
Jan 02 23:22:36 arch_1 kernel: Scanning for low memory corruption every 60 seconds
Jan 02 23:22:36 arch_1 kernel: audit: initializing netlink socket (disabled)
Jan 02 23:22:36 arch_1 kernel: type=2000 audit(1388722954.276:1): initialized
Jan 02 23:22:36 arch_1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 02 23:22:36 arch_1 kernel: zbud: loaded
Jan 02 23:22:36 arch_1 kernel: VFS: Disk quotas dquot_6.5.2
Jan 02 23:22:36 arch_1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 02 23:22:36 arch_1 kernel: msgmni has been set to 3650
Jan 02 23:22:36 arch_1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 02 23:22:36 arch_1 kernel: io scheduler noop registered
Jan 02 23:22:36 arch_1 kernel: io scheduler deadline registered
Jan 02 23:22:36 arch_1 kernel: io scheduler cfq registered (default)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 02 23:22:36 arch_1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 02 23:22:36 arch_1 kernel: intel_idle: does not run on family 6 model 23
Jan 02 23:22:36 arch_1 kernel: GHES: HEST is not enabled!
Jan 02 23:22:36 arch_1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: 0000:00:03.3: ttyS0 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
Jan 02 23:22:36 arch_1 kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 02 23:22:36 arch_1 kernel: Linux agpgart interface v0.103
Jan 02 23:22:36 arch_1 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan 02 23:22:36 arch_1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 02 23:22:36 arch_1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 02 23:22:36 arch_1 kernel: mousedev: PS/2 mouse device common for all mice
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: RTC can wake from S4
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
Jan 02 23:22:36 arch_1 kernel: drop_monitor: Initializing network drop monitor service
Jan 02 23:22:36 arch_1 kernel: TCP: cubic registered
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 10
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 17
Jan 02 23:22:36 arch_1 kernel: Key type dns_resolver registered
Jan 02 23:22:36 arch_1 kernel: registered taskstats version 1
Jan 02 23:22:36 arch_1 kernel: Magic number: 14:436:362
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: setting system clock to 2014-01-03 04:22:34 UTC (1388722954)
Jan 02 23:22:36 arch_1 kernel: PM: Hibernation image not present or could not be loaded.
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
Jan 02 23:22:36 arch_1 kernel: Write protecting the kernel read-only data: 8192k
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
Jan 02 23:22:36 arch_1 systemd-udevd[50]: starting version 208
Jan 02 23:22:36 arch_1 kernel: Floppy drive(s): fd0 is 1.44M
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type USB registered
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbfs
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver hub
Jan 02 23:22:36 arch_1 kernel: SCSI subsystem initialized
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new device driver usb
Jan 02 23:22:36 arch_1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci: EHCI PCI platform driver
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
Jan 02 23:22:36 arch_1 kernel: FDC 0 is a post-1991 82077
Jan 02 23:22:36 arch_1 kernel: libata version 3.00 loaded.
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: version 3.0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi0 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi1 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi2 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi3 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi4 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi5 : ahci
Jan 02 23:22:36 arch_1 kernel: ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 58
Jan 02 23:22:36 arch_1 kernel: ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 58
Jan 02 23:22:36 arch_1 kernel: ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 58
Jan 02 23:22:36 arch_1 kernel: ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 58
Jan 02 23:22:36 arch_1 kernel: ata5: DUMMY
Jan 02 23:22:36 arch_1 kernel: ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 58
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: pata_acpi 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ata_generic 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi6 : ata_generic
Jan 02 23:22:36 arch_1 kernel: scsi7 : ata_generic
Jan 02 23:22:36 arch_1 kernel: ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
Jan 02 23:22:36 arch_1 kernel: ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
Jan 02 23:22:36 arch_1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata4: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata6: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata2.00: ATAPI: PIONEER DVD-RW DVR-217D, 1.07, max UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: ATA-8: WDC WD15EARX-00ZUDB0, 80.00A80, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Jan 02 23:22:36 arch_1 kernel: ata1.00: ATA-6: WDC WD360GD-00FNA0, 34.06J34, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: 72303840 sectors, multi 0: LBA48
Jan 02 23:22:36 arch_1 kernel: ata1.00: applying bridge limits
Jan 02 23:22:36 arch_1 kernel: ata2.00: configured for UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: configured for UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: configured for UDMA/100
Jan 02 23:22:36 arch_1 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 34.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217D 1.07 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD15EARX-00Z 80.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sda: sda1 sda2
Jan 02 23:22:36 arch_1 kernel: sdb: sdb1
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
Jan 02 23:22:36 arch_1 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 02 23:22:36 arch_1 kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 02 23:22:36 arch_1 kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: 3 ports detected
Jan 02 23:22:36 arch_1 kernel: device-mapper: uevent: version 1.0.3
Jan 02 23:22:36 arch_1 kernel: device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-1> at 1
Jan 02 23:22:36 arch_1 kernel: usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbhid
Jan 02 23:22:36 arch_1 kernel: usbhid: USB HID core driver
Jan 02 23:22:36 arch_1 kernel: input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/u
Jan 02 23:22:36 arch_1 kernel: hid-generic 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitec
Jan 02 23:22:36 arch_1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Jan 02 23:22:36 arch_1 kernel: usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
Jan 02 23:22:36 arch_1 systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SY
Jan 02 23:22:36 arch_1 systemd[1]: Detected virtualization 'xen'.
Jan 02 23:22:36 arch_1 systemd[1]: Set hostname to <arch_1>.
Jan 02 23:22:36 arch_1 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device dev-hvc0.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Setup Virtual Console...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Load Kernel Modules...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Service...
Jan 02 23:22:36 arch_1 systemd[1]: Started Journal Service.
Jan 02 23:22:36 arch_1 systemd-journal[129]: Journal started
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Coldplug all Devices...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Jan 02 23:22:36 arch_1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Po
Jan 02 23:22:36 arch_1 systemd[1]: Started Set Up Additional Binary Formats.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Create list of required static device nodes for the current kernel
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Huge Pages File System...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Debug File System...
Jan 02 23:22:36 arch_1 systemd[1]: Mounting POSIX Message Queue File System...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Apply Kernel Variables...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Started File System Check on Root Device.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Remount Root and Kernel File Systems...
Jan 02 23:22:37 arch_1 systemd[1]: Expecting device dev-disk-by\x2duuid-1f355bf1\x2d1469\x2d4722\x2d8f65\x2d01
Jan 02 23:22:37 arch_1 systemd[1]: Starting Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Started udev Coldplug all Devices.
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Loaded
Jan 02 23:22:37 arch_1 kernel: RPC: Registered named UNIX socket transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered udp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'nfs'
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Netfs 'nfs' registered for caching
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_evtchn'
Jan 02 23:22:37 arch_1 kernel: xen:xen_evtchn: Event-channel device installed
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntdev'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntalloc'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_blkback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_netback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_pciback'
Jan 02 23:22:37 arch_1 kernel: xen_pciback: backend is vpci
Jan 02 23:22:37 arch_1 kernel: ACPI: Requesting acpi_cpufreq
Jan 02 23:22:37 arch_1 kernel: Monitor-Mwait will be used to enter C-1 state
Jan 02 23:22:37 arch_1 kernel: Warning: Processor Platform Limit not supported.
Jan 02 23:22:37 arch_1 systemd[1]: Started Apply Kernel Variables.
Jan 02 23:22:37 arch_1 systemd[1]: Started Setup Virtual Console.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Huge Pages File System.
Jan 02 23:22:37 arch_1 kernel: xen_acpi_processor: Uploading Xen processor PM info
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Debug File System.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_acpi_processor'
Jan 02 23:22:37 arch_1 systemd[1]: Mounted POSIX Message Queue File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Load Kernel Modules.
Jan 02 23:22:37 arch_1 systemd[1]: Mounting Configuration File System...
Jan 02 23:22:37 arch_1 systemd[1]: Mounted FUSE Control File System.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Configuration File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create list of required static device nodes for the current kernel.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Create static device nodes in /dev...
Jan 02 23:22:37 arch_1 systemd[1]: Started Remount Root and Kernel File Systems.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Load/Save Random Seed...
Jan 02 23:22:37 arch_1 kernel: EXT4-fs (dm-0): re-mounted. Opts: data=ordered
Jan 02 23:22:37 arch_1 systemd[1]: Started Load/Save Random Seed.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create static device nodes in /dev.
Jan 02 23:22:37 arch_1 systemd[1]: Starting udev Kernel Device Manager...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Mounting /tmp...
Jan 02 23:22:37 arch_1 systemd[1]: MountinI have the same problem on Fedora Core 20 with xen 4.3.1 32bit Sempron3200+ with turned off HPET tables on South bridge and these boot options
xen: noreboot nosmp console_to_ring console=vga vga=text-80x50
linux: pci=noacpi pci=nommconf
Image on Yandex disk
When I solve it I notify you.
Last edited by maskimko (2014-01-16 08:12:35) -
Major crashing and performance problems, apparently since 10.6.1
Hi there
Since I updated to 10.6.1, I've had significant problems with my black MacBook, Core 2 Duo 2.16Ghz. I get the spinning beach ball holding me up all the time (twice since I've started typing this message), the fan goes crazy, applications just crash and hang, and on a few occasions the whole window server has just crashed, killing all my apps and dumping me out at a login prompt.
I've looked in the console and seen a variety of messages, some related to Windowserver, e.g.:
[598] kCGErrorIllegalArgument: _CGXMapShmemInternal : Invalid shared memory id
[112] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 179)
[112] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x7 not owned by caller loginwindow
some related to I/O:
kernel disk0s2: I/O error.
and of course the latter make me think about disk problems. However the disk is only 6 months old, I replaced the one that came with the computer which died in March, and this one's been perfectly alright up until now, so I've checked the disk with Disk Utility and /sbin/fsck -fy in single user mode, and both say there's nothing wrong with it. I have an external LaCie 2Big RAID attached by Firewire which is my TimeMachine volume, and I've run Disk Utility against that and again, it says there's no problem.
I've rebooted in safe mode, single user mode, verbose mode, all of it says everything's fine. I've switched off Spotlight indexing, as I thought it might be that. I'm getting nowhere - haven't had a window server crash for a couple of days, but applications randomly take ages to start, cursors just hang waiting on the beach ball, and sometimes if I leave Activity Monitor running I see applications just go red "not responding" for a while and then just start responding again later, with nothing in the system/console/'all messages' log to indicate there was ever a problem.
I've got 168.3GB free space out of 250GB available on the boot disk; Activity Monitor says 1.17GB free RAM. 'top' says PhysMem: 1247M free. I've checked the memory in single user mode by running '/usr/bin/memtest all 20' and it says everything's fine.
There are a variety of other error messages, lots of warning to do with multiple kernel dependencies which I think are probably deprecation warnings, but a lot of which I don't know much detail about. The point is, none of this was happening before I upgraded to 10.6.1, and now that I have, it's making my computer nigh on unusable at times.
Anyone have any ideas?
Cheers,
IgorHi again. Right, Thursday night it crashed, just hanging there, so I force-restarted with the power button, and it wouldn't boot. disk0s2: I/O error in console. Great, dead disk, I think; well, a shame that neither Disk Utility nor fsck told me anything about it, but at least that explains things.
So today I went out and bought a Seagate Momentus 500GB 7200rpm 2.5" SATA disk, took it home, plugged it in, partitioned the disk, did a restore from Time Machine, and pressed "Restart from restored system". Bang. Nothing. Option-restart: only shows SL install DVD. Console: nothing. Reboot into installer, doesn't even show Seagate in Disk Utility. Swap old disk back in, same as before, disk I/O error. Try new one again, nothing. Start thinking I might be in for a big bill or a new Mac, try once more, boots fine. All working fine except Mail which gives me this:
"You can't use this version of Mail with this version of Mac OS X
You have Mail version 4.1 (1076/1075.2). It can't be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button."
So:
a) What might be up with the computer that it sometimes can't see the HD? I'm trying to make sure the disk is securely seated, but it's as far as I can see identical in shape to the last one, with which I carted the Mac around over the last few months without any such problems. Connections? Motherboard? SATA bus? How can I find out? This is going to be expensive, isn't it?
b) In the meantime, while I have the thing booted and working, how do I fix the above? I simply restored the whole system from a Time Machine backup about 4 hours before the computer died the other night, didn't do anything funny at all: how can the versions be wrong? Software Update says I have no updates necessary, where do I find an installer?
Cheers
i -
Kernel panics with iBook G4 and 10.3.9 (modem kext)
Upon upgrading my iBook G4 to 10.3.9, I began recieving a rash of kernel panics (about 1-2 a day) . This was quite a change from the relatively solid machine I had previous ( about a panic a month with 10.3.8 with heavy daily use ). I initially suspected some ram failure but after extensive testing (bit flip, pattern, etc.) in single user mode eliminated that possibility.
The panic log contiuously pointed at the MotorolaSM56K driver. I now suspected a kernel module/kernel incompatibility problem. After activating root and kextunloading that class I was able to regain some measure of stabilty ( about 4-5 days between crashes ). This stability varied as the class would be reloaded by OS under certain (unknown) conditions. As I have actually never used the built-in modem I have now decided to fully unload the AppleI2SModemFamily.kext extension, to avoid the SM56K class from starting.
Have others noticed similar issues when upgrading from 10.3.8 to 10.3.9? or with the modem kext? I am suprised at the poor quality of this "upgrade", having used X since 10.1 on my ibook G3 (that I have now kept at 10.3.8)
Is the modem kernel extension a red herring and its truly an issue in the kernel (that the modem extension exposes)?
attached are some snippets from my (now very long) panic.log:
Wed Nov 23 14:35:32 2005
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000000000025C PC=0x000000000008D810
Latest crash info for cpu 0:
Exception state (sv=0x326E3280)
PC=0x0008D810; MSR=0x00001030; DAR=0x0000025C; DSISR=0x40000000; LR=0x0001784C; R1=0x121EBC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000177F4 0x00014774 0x000219F8 0x00040DC4 0x00016360 0x000189D4 0x0001C9E0 0x00027444
0x00094318 0x0079003E
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.1)@0x6ef000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x6e4000
dependency: com.apple.iokit.IOSerialFamily(6.0.1d20)@0x49d000
Proceeding back via exception chain:
Exception state (sv=0x326E3280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x259F4A00)
PC=0x900106D8; MSR=0x0000F030; DAR=0x1C348004; DSISR=0x40000000; LR=0x901D9778; R1=0xBFFFEDB0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x326E3280)
PC=0x0008D810; MSR=0x00001030; DAR=0x0000025C; DSISR=0x40000000; LR=0x0001784C; R1=0x121EBC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000177F4 0x00014774 0x000219F8 0x00040DC4 0x00016360 0x000189D4 0x0001C9E0 0x00027444
0x00094318 0x0079003E
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.1)@0x6ef000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x6e4000
dependency: com.apple.iokit.IOSerialFamily(6.0.1d20)@0x49d000
Exception state (sv=0x259F4A00)
PC=0x900106D8; MSR=0x0000F030; DAR=0x1C348004; DSISR=0x40000000; LR=0x901D9778; R1=0xBFFFEDB0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
Wed Nov 23 20:54:17 2005
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000000000025C PC=0x000000000008D810
Latest crash info for cpu 0:
Exception state (sv=0x326E3280)
PC=0x0008D810; MSR=0x00001030; DAR=0x0000025C; DSISR=0x40000000; LR=0x0001784C; R1=0x121EBC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000177F4 0x00014774 0x000219F8 0x00040DC4 0x00016360 0x000189D4 0x0001C9E0 0x00027444
0x00094318 0x0079003E
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.1)@0x6ef000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x6e4000
dependency: com.apple.iokit.IOSerialFamily(6.0.1d20)@0x49d000
Proceeding back via exception chain:
Exception state (sv=0x326E3280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x259F4A00)
PC=0x900106D8; MSR=0x0000F030; DAR=0x1C348004; DSISR=0x40000000; LR=0x901D9778; R1=0xBFFFEDB0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x326E3280)
PC=0x0008D810; MSR=0x00001030; DAR=0x0000025C; DSISR=0x40000000; LR=0x0001784C; R1=0x121EBC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000177F4 0x00014774 0x000219F8 0x00040DC4 0x00016360 0x000189D4 0x0001C9E0 0x00027444
0x00094318 0x0079003E
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.1)@0x6ef000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x6e4000
dependency: com.apple.iokit.IOSerialFamily(6.0.1d20)@0x49d000
Exception state (sv=0x259F4A00)
PC=0x900106D8; MSR=0x0000F030; DAR=0x1C348004; DSISR=0x40000000; LR=0x901D9778; R1=0xBFFFEDB0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
iBook G4 Mac OS X (10.3.9)A reasonable possibility is that you upgraded without
first repairing the hard drive and permissions.
Although this may not help after the fact, I suggest
you give it a try:
Boot from your OS X Installer. Be sure to use the
installer for the version of OS X you have installed.
After the installer loads select Disk Utility from
the Installer menu (or Utilities menu if using
Tiger.) After DU loads select your OS X volume from
the list on the left, click on the First Aid tab,
then click on the Repair Disk button. If DU reports
any errors that have been fixed, then re-run Repair
Disk until no errors are reported. If no errors are
reported click on the Repair Permissions button. Wait
until the operation completes, then quit DU and
return to the installer. Now shutdown the computer
for a couple of minutes and then restart normally.
This I did yesterday and found a slew of permission setting problems - speaking to some endemic issues in the OS software/installation scripts. But after doing this repair (all were repairable) and reinstalling the COMBO update to 10.3.9 the problem persists. Thanks for the tip.
Keep in mind that RAM can pass the memory tests yet
not work properly with OS X. Therefore, you cannot
assume that because the RAM passed the memory tests
that it is fully functional with OS X. If you have
installed third-party RAM, the only definitive test
is to remove it and see if the kernel panics cease.
If they do, then add one module at a time and
re-test. When the panics recur you have identified
the faulty module.
Though I find disconcerting that Apple's POST routines are not sufficient to identify out of spec/incompatible RAM, I fully tested my memory (as mentioned) using memtest in single user mode. Memtest is a gnu program ported over from BSD unix that does exhaustive memory testing (ie the patterns, walking, etc that I mentioned)
Of course it's also possible there is a hardware
problem with the modem itself or that your upgrade to
10.3.9 is defective. After repairing the hard drive
and permissions you should reinstall the 10.3.9
update, but be sure to do so using the Combo updater.
You can download it from Apple's download site.
How the modem hardware failure mysteriously coincided with my 10.3.9 upgrade begs the question on how could be anything but a software issue... -
Greetings,
In August 2008 I bought my first Mac and ever since have trouble with it. I already contacted Apple Support, Sonnet Support, Lacie Support, still there is no solution on the table.
I thought, before I have the maschine picked up I give it a shot in these fora.
My configuration:
Mac Pro 3.0Ghz, 16 Gig, 4x 750 Gig HD internal, 3x 1TB external (Time capsule, 2x Lacie quadra), Sonnet E4P.
My main problems:
1. Noise level:
The maschine emits a humming noise, intervalling up and down, probably located where the PSU is installed (decibel meter check). The noise is clearly audble, even over the AHT noise of the fans speeding up. The resonance can be felt if a hand is put on the chassis.
I asked friends with similiar maschines, and none of them reports this extremly annoying hum. I checked the HD sleds, all sits tight.
I assume this is only able to be resolved by sending the maschine to service.
2. Boot and Reliability Problems:
If my Mac is out over night, and on booting it up in the morning, it takes around 6-7 minutes until boot cycle is complete. If I am not mistaken, this should be more in the region of 30 seconds.
Up until recently, after boot OSX did not find a harddrive, but I solved this, the reason was that the useless dealer I bought it from formatted one internal drive as MS-DOS FAT, go figure.
However, I need to run a RAID-0 via OSX, and will exchange the WD Caviar SE for WD 1TB RE3 for that purpose. I am also having trouble with my xternal Lacie Drives on Sonnet E4P, but I send system logs and reports to Sonnet still waiting on their answer.
Would it be correct to assume that less than one minute is a more appropriate boot up time?
Does anyone else around here have this noise problem I described?
Best wishes
OVSGood evening The Hatter,
yeah, I studied a couple of those threads and tried to apply findings. Tell me, you say you have your MCP on the side, does that not cause problems for the DVD drive and/or other parts. The MCP does not look as if it is designed to lay on it's side.
I tried to de couple the chassis from the floor with heavy carpet underlay, still the same. I am not fuzzy, but this sound is really disturbing in a quiet environment, and I often need it quiet when I work on photographs. I left the case open, I pushed the lever half way up, nothing resolved that.
Allow me to ask you something else, you seem to have a lot of Mac years under your belt, would you think my boot problems can come from a dodgy OSX installation? The dealer I bought it from in August installed everything, but has proven to be rather incompetent and very sloppy. The first few weeks, on 10.54, I had probably 8-10 kernel crashes, which stopped after 10.5.5 and so far only occurs when I use sleep mode, hence I can;t use it anymore.
The pain in the butt is that I probably would be best advised to do a complete clean install, hence have to authorise all my software again. - Sigh - I intend to wait with that until i received new HD's.
Best wishes
OVS -
Kernel 2.6.35-1 and 2.6.35-2 crash amuled
On the same machine, with kernel 2.6.34.2 and kernel 2.6.34.2-bfs amuled runs normal. Only the 2.6.35 kernel from testing crashes amule every time - and I tried it very, very often ^.^
----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
Current version is: aMuled 2.2.6 using wxGTK2 v2.8.10
Running on: Linux 2.6.35-ARCH i686
[2] ?? in amuled[0x8057c81]
[3] wxFatalSignalHandler in /usr/lib/libwx_baseu-2.8.so.0[0xb76f3c76]
[4] ?? in [0xb77e6400]
[5] GSocket::Input_Timeout() in /usr/lib/libwx_baseu_net-2.8.so.0[0xb777c133]
[6] GSocket::Read(char*, int) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb777cd64]
[7] wxSocketBase::_Read(void*, unsigned int) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb777878f]
[8] wxSocketBase::Peek(void*, unsigned int) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb77788f7]
[9] wxProtocol::ReadLine(wxSocketBase*, wxString&) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb777312e]
[10] wxHTTP::ParseHeaders() in /usr/lib/libwx_baseu_net-2.8.so.0[0xb777111f]
[11] wxHTTP::BuildRequest(wxString const&, wxHTTP::wxHTTP_Req) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb7771f90]
[12] wxHTTP::GetInputStream(wxString const&) in /usr/lib/libwx_baseu_net-2.8.so.0[0xb77721cc]
[13] ?? in amuled[0x80c2dbc]
[14] ?? in amuled[0x80c329d]
[15] wxThreadInternal::PthreadStart(wxThread*) in /usr/lib/libwx_baseu-2.8.so.0[0xb76eec50]
[16] wxPthreadStart in /usr/lib/libwx_baseu-2.8.so.0[0xb76eecbd]
[17] ?? in /lib/libpthread.so.0[0xb77a2e60]
[18] clone in /lib/libc.so.6[0xb746720e]
Now I'm compiling amule-devel in the hope, that it helps.
Have fun,
Karlpatroclo7
Wireless extensions are included and I did make/make install and everything seemed to go right - no errors! And I have allways used rt2500-cvs-daily -drivers because they have been very stable (in my system).
nightfrost
Code:
modprobe -l | grep rt2
Thanks for that - there was missing rt2500.ko module and I added it in place and wlan is now working.
But now I have nvidia-problems... maybe I can solve it later -
MBP 13'' Display and Screen Problems.
HELP!
I've posted about this problem before, and I've read all the threads, but my problem is not resolved despite sending my new MBP back to Apple to sort it out. They fitted a new logic board, but it has made no difference. My machine is still under warranty.
The MBP continues to totally freeze when connected to an external projector via the mini port using VGA. The computer screen goes a funny blue-ish color with everything out of focus and the pointer freezes, too. It has also started to make a funny buzzing noise, too. I have to restart the entire machine, which is not very convenient right in the middle of using it. It is an intermittent problem. Sometimes, the machine is working OK for a few days, other days it crashes several times.
I have read that this may be something to do with 32 bit versus 64 bit Kernel start up. Some suggest resetting the PRAM and system manager, but I'm still struggling. Does anyone know what the real issue is? A solution would be great.
By the way, I am resorting to using my old MBP (Nov 2006 15" model) and it works perfectly still, no matter what projector it is connected to. It is frustrating the **** out of me as I bought the 13'' to have more power and RAM and it is easier to lug about the place, but I can't use it as I need to connect it up to various projectors at work.
Any expert out there? I'd really appreciate a solution to this problem. Is it only confined to the MBP 13", or has the 15" got similar problems? From the threads, I can tell this has been a big issue for people using their computers in conjunction with a projector.Badlydrawnboy wrote:
I have a new MBP that is less than 3 months old. I've been having various display and power problems pretty much since I got it.
You should not be having those type of problems on a brand new Mac. Did you call AppleCare about this? If not why not?
You have 90 days of free phone tech support from Apple on top of your one year warranty. Strongly suggest that you use it before you lose it! You already missed your 14 day from the date of purchase to return your MBP for a refund or an exchange. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
BOSD, Battery issues and Heating problem after iOS 8 upgrade
i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.
The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV -
I am making code to try to make a game and my problem is that my code......
I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
//Wounding formula
double sL = 70; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 50; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
rockCrab() {
void attack() {
health = floor(10 + sL/10 * aL/10);
double done = rint(fH - fA);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
//Wounding formula
double sL = 1; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 1; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
self() {
void attack() {
health = floor(10 + sL/10 * aL/10);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
public static void main(String[] args) {
self instance1 = new self();
rockCrab instance2 = new rockCrab();
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.
-
A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905� -
LG Ally text message and gps problems
hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever madeI do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet?
Maybe you are looking for
-
Mapping the Follow-up action to the Usage-Decision
Hi All, I have a the following requirement in my development: The Usage decision needs three function-modules for the three cases of the follow-up process. In addition to that this ,service shall have a control table in Customizing, where
-
Unable to find Adobe PDF resource files since SP3 installed
We have a user who is sure since XP Service Pack 3 was installed that he cannot print to PDF. Once he clicks Print he gets an error stating Unable to find "Adobe PDF" resource files "C:\...\Adobe PDF 6.0\Settings\Adobe PDF Converter.joboptions" Runni
-
Are there any recording apps that can record phone conversations on the iphone?
-
Initializing a varying array of records?
Hi everybody, Given below is a sample code. I have created a varying array of records. However I am unable to initialize the same. Can anybody help me out? DECLARE TYPE XRECORD IS RECORD(x NUMBER, y VARCHAR2(12)); TYPE VARRAYTYPE IS VARYING ARRAY(10)
-
Unable to Open Change Organisation Form
Hi All, i have added Change Organisation - MRP, Change Organisation - CST Form Function to a custom Menu, and it does not show list of Inventory Organisation. and i have also added "Change Organisation" Self Service Function and now it shows my Defau