Kernel change for Non Unicode to Unicode

Hi All,
Is it ncessary to change the Non-Unicode Kernel to Unicode Kernel before before starting the Export for Unicode Conversion?
Regards,
Amit

Hi
Is it ncessary to change the Non-Unicode Kernel to Unicode Kernel before before starting the Export for Unicode Conversion?
No
Niel has made every thing clear
Regards
Uday

Similar Messages

Target system install problem (SAPINST searching for Non unicode kernel)

Hi,
I'm currently performing a unicode conversion (from 4.7 to EHP4). I am finished with the upgrade and I'm now in the unicode conversion part.
I have completed the export and selected unicode as the target system. I am done with source system uninstallation and I'm now installing the unicode target system. I have selected unicode during the parameter selection (it's the default option anyway) but during the part where it will ask for the kernel DVD, it doesn't accept the path of my unicode kernel (and instead looks for the non-unicode kernel)

Hi Markus,
Thanks for your response. This problem is now resolved. It turns out that there are some remaining files from the old /usr/sap/<> and /sapmnt/SID/exe that were not deleted yet (after uninstalling for non unicode system). I proceeded to delete again these files and ensure that there are no files from the non unicode system

Problems realted to changing the language for non-Unicode programs from one into anther.

Hi,
Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into
English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal
for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while language used
for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language
Arabic to be shown properly, then then I
must let the language for non-Unicode programs be Arabic.
Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
must be in my Arabic lanague English and whatever location and format are.
Is this happened with you as well?
I would highly appreciate any clarification from you.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
I am confused about your issue.
when you changed language for non-Unicode programs into English, it show English.
while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
This is correct. Why you think it's an issue?
About your second scenario description, I was not clear what you said. Could you give us a explanation?
Note: System display language is not the un-Unicode program language.
You can just choose one language to display the system at same time.
This article might be helpful to you:
Install or change a display language
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
Change the system locale
http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
Karen Hu
TechNet Community Support

Problems realted to changing the language for non-Unicode programs

Hi everyone!
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N.
My Windows 7(464Bit) Ultimate, and its base language, and display language is English.
The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
I would like anyone kindly to confirm for me why I have been facing these problems when changing language for non-Unicode programs from English into Arabic.
First: After I have installed the AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
B- when I changed language for non-Unicode programs into English.
I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
Second:
A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
B- All the Arabic contents are displayed properly while language for non-Unicode programs is Arabic.
Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
A- I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
B- However while language for non-Unicode programs is Arabic, there is no error extracting files.
In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while langauge used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?. IF so I would be saying that if I have wanted the contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
I would highly appreciate any clarification from you.
This question was solved.
View Solution.

Hi cooperator,
I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

When i use language for non-unicode [Russian] and i insert another language

when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
Thank you for help.My English is not good,Sorry

that is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file.

Cant Set System Locale (language for non-Unicode programs)

Im trying to deploy custom image wherein Input language and location should be English Australia , BUT system locale (language for non-Unicode programs) should be English-us. The requirement is as below
Standards and Formats: English (Australia)
Location: Australia
Default input language: English (Australia) – US
Installed input languages: English (Australia) – US
Time zone: Cen. Australia Standard Time
System Locale
Language for non-Unicode programs: Default - English (United States)
Below is my CS.ini
SkipLocaleSelection=YES
UserLocale=en-AU
SystemLocale=en-US
UIlanguage=en-AU
KeyboardLocale=0c09:00000409
SkipTimeZone=YES
TimeZoneName=Cen. Australia Standard Time
when image is deployed the language for non-Unicode is also getting set to en-AU while it should be en-US, other language setting are as per the requirement. what should I do :(
thanks a lot
Sanju.

that is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file.

Cannot run a UNICODE kernel against a non-UTF8 database

Hi,
I am trying to install SAP ECC 6.0 SR2 . am using windows 2003 server oracle 10g db.
please help me how to resolve this...
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100717144107
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -testconnect
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Cannot run a UNICODE kernel against a non-UTF8 database (charset = AL32UTF8)
(DB) ERROR: db_connect rc = 256
DbSl Trace: Default conn.: already connected to DEV
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100717144108

Reinstallae the server .problem solved thanks to 3everyone

Importing from an Oracle database converted from non-unicode to unicode - SSIS 2012

Hi,
I've some SSIS 2012 pkgs that read from a non-unicode Oracle database to a non-unicode SQL Server database.
Few days later, the Oracle database will be converted to unicode one and so I need to update the SQL database and the SSIS pkgs. Obiously no data conversion transformations are present in the pkgs. I'd like to avoid to add more of these data conversions.
As a first step, I'm trying to convert a SQL table to unicode format, but it isn't possible to convert non-unicode and unicode string data types.
I did not expect to have an error about the conversion from to non-unicode Oracle database (not yet converted) to unicode SQL Server database: a such conversion doesn't lost any information content. For me, it is right to have an error by from unicode to
non-unicode conversion.
Any suggests to solve this issue with a minimum development effort? Many thanks

Nope once you change datatypes to unicode you've to refresh metadata settings within SSIS packages for it to work fine. SSIS doesnt have the ability to do metadata changes at runtime. So someone has to update package metadata information to make them unicode
to make sure it works correctly after the changes.
What you can do is create test dbs in oracle and sql in uncode and create some modified packages based on it. Once you make changes to production dbs you need to move these modified copies also to production after making necessary config value changes like
servername,dbname,folder paths etc and then they will continue to work normally without causing any further downtimes to the customer.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Transport request from non-unicode to unicode

Hi
In our BW landscape we have Development and Production server.
Unfortunately the development server was installed on BW 3.5 with NonUnicode
and production on BW 3.5 with UNICODE option..
We inderstand the architecture change, but we are using only ENGLIGH language in our envn.. Do we still need to do a unicode conversion on our development server ??
I understand that as long as I am using single language & single codepage, I will be needing a unicode conversion
Kindy let me know your feedback..
Thanks & Regards
Madhu

Hi,
We are having a running landscape of non-unicode system.
Now, Another Landscape is being used by parent company of Unicode Systems. Now, All data, programs, objects are being configured on the parent company server. So, there is no chance to migrate non-unicode to unicode.
But, We have to apply all packages developed on Non-unicode system to Unicode System. I have released that request and copied data file and cofile into target developement System (Unicode) then imported on this Server.
Now, we are facing this problem (Above mentioned.). I think, there must be a solution for it conceptually.
Regards
Dharmendra

Non-unicode to unicode conversion

Dear All,
We have non unciode systems in our landscape and we planned to do unicode conversion. I would like to know the support period for non unicode system by SAP. Does anyone knows about When will SAP drops their support for non unciode? , so that we will plan for unicode conversion accordingly. Any links ro refer ? Thanks in advance.
Regards
Raj

Hi Raj,
1) as you can see from the link above, all new installations based on Netweaver 7.0 are supported as Unicode systems only.
2) There is an FAQ about this statement: Please have a look at
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000380759&_OBJECT=011000358700000045082008E
3) The usage of new technologies like JAVA integration and eSOA applications are only supported on Unicode systems. Please have a look at SAP notes 838402, 975768 and 1358929.
4) From my point of view, there is a high probability that the successing release of SAP Business Suite 7.0 will be Unicode only. However at the moment this is being discussed inside SAP and there is no outcome yet.
Best regards,
Nils Buerckel
Solution Management
Globalization Services
SAP AG

From non-unicode to Unicode

I want to read texts in a Unicode SolMan 7 sps20 system that were already saved in a non-Unicode SolMan 3.2 system. When, i tried to open docin solar01, i have a message :"No document opened". Any idea?!

Hi Puneet,
You can convert non-unicode single code page systems to unicode for all SAP Applications and SAP NetWeaver systems. Of SAP NetWeaver you can only convert SAP NetWeaver AS (ABAP) and SAP NetWeaver BI to unicode as all other SAP NetWeaver solutions are unicode only anyway. For the SAP Applications please note that only certain releases can be converted to unicode. For SAP R/3, you have to be at release SAP R/3 Enterprise extension set 2.00 before you can convert to unicode.
The other major restriction is that most but not all databases support unicode - the major exception being Informix.
Also it should be pointed out that you can do a conversion in place and therefore do not need to do an application migration (it is simply an export with conversion and a reload into the new database).
Al the requirements and conversion steps are covered in conversion guides found on the service marketplace. http://service.sap.com/unicode@sap -> Unicode Library -> Unicode Conversion Library
I hope this helps,
Mike.

Re : The Migration of Non Unicode to Unicode System

What are the areas must be check once we shift from non Unicode to Unicode system

Hi,
check this threads and the links in it:
SAP Best Practice For Unicode Upgrades - NetWeaver 2004s
Regards
Andreas

HELP Cant login on my MAC after changed in OSX Server all access for NONE

Hi
After changed for the users , roots , and another one , the access for NONE in one of the options in OSX Server to configure access just lost the capability to open the programs with the click of the mouse and turned off the MAC
I can't login now into my MAC , the display got the apple logo on startup and the login window doesn't come blocking me to login
Any help are welcome
Thanks

Hi
Just tipped command key and S key and hold it and turned the mac on
Lots of information coming but in the middle of the screen I can read some of the lines it says
Darwin Kernel VErsion....
Security policy loaded
AppleIntell CPUPowerManagementClient :ready
FireWire (OHCI) TI ID 823f built-in is now active
Got boot device= iOService : AppleACPIPlatformExpert ......
"Launch [1] has started up in single-user mode"
" Verbose boot will log to /dev/console "
"SHutdown loggin is enabled "
Root device is mount read-only
It got much more lines and ends with
If you want to make modifications to files
/sbin/fsck -fy ( this command line show that system it's ok )
/sbin/mount -uw
If you want to boot the system
Exit
But after exit it goes to the same situation with the apple logo in the middle of the screen and the login widow doesn't come
Thanks anyway for your answer
Any further information in how can I login into my mac are welcome
Thanks

I have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else

i have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else i need some one helpe wt this issue cus i spend money and thing that i cant have back

adkennon wrote:
And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

Transports from none Unicode to Unicode system. Possible?

Hello,
is it possible to transports from none Unicode to Unicode system?
Any experience?
Any links?
Best regards.

Hi,
We ahve upgraded to unicode but never transporetd from non unicode to unicode...
Non unicode to unicode is ok but vice versa might be will not work.
reagrds
Gopal

Kernel change for Non Unicode to Unicode

Similar Messages

Maybe you are looking for