Kernel panic caused when saving Photoshop file

Hi all,
Wondering if someone can help out with this kernel panic sitaution?
We've got two Creatives in the office who have recently both upgraded their iMac's to Mavericks 10.9. They both use Photoshop CS5 extended (12.1 x64). We have a Windows 2008R3 server and both are using SMB2 to connect to the server.
When they try to save an open Photoshop file they are editing, they get an error related to permissions. When they try to save the file again using a different name, their machines immediately kernel panics. Here's a panic log from one of their machines that just crashed now.  Any solutions out there? This was not happening befor they upgraded to Mavericks, however they did get the file permissons issue.
Anonymous UUID:       30936614-E506-06EF-3FE6-E61ACBF13F4D
Thu Dec 12 17:20:22 2013
panic(cpu 1 caller 0xffffff800f2dc19e): Kernel trap at 0xffffff7f9163cb33, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000010d358dd8, CR3: 0x000000002658b042, CR4: 0x00000000000206e0
RAX: 0x4343432f7374638d, RBX: 0xffffff80350c8968, RCX: 0x0000000003000000, RDX: 0xffffff80350c8968
RSP: 0xffffff8100faa950, RBP: 0xffffff8100fab1b0, RSI: 0x0000000000000000, RDI: 0xffffff80350c8968
R8:  0xffffff8100fab1c0, R9:  0x000000000000000c, R10: 0x00000000000001f0, R11: 0x0000000000000040
R12: 0x0000000000000001, R13: 0xffffff8100faa988, R14: 0x4343432f73746365, R15: 0xffffff8100fab1c0
RFL: 0x0000000000010202, RIP: 0xffffff7f9163cb33, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x000000010d358dd8, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80f1e3ddf0 : 0xffffff800f222f69
0xffffff80f1e3de70 : 0xffffff800f2dc19e
0xffffff80f1e3e040 : 0xffffff800f2f3606
0xffffff80f1e3e060 : 0xffffff7f9163cb33
0xffffff8100fab1b0 : 0xffffff7f9166d3eb
0xffffff8100fab1f0 : 0xffffff7f9165f569
0xffffff8100fab290 : 0xffffff7f9166729b
0xffffff8100fab2f0 : 0xffffff7f91666ac4
0xffffff8100fab3f0 : 0xffffff7f9166afba
0xffffff8100fab490 : 0xffffff7f91640a94
0xffffff8100fab590 : 0xffffff7f9164a722
0xffffff8100fab720 : 0xffffff7f916431d3
0xffffff8100faba00 : 0xffffff800f3fcb17
0xffffff8100fabae0 : 0xffffff800f3f3e40
0xffffff8100fabb80 : 0xffffff800f3e5f15
0xffffff8100fabc30 : 0xffffff800f3e67d2
0xffffff8100fabf50 : 0xffffff800f63de23
0xffffff8100fabfb0 : 0xffffff800f2f3e06
      Kernel Extensions in backtrace:
         com.apple.filesystems.smbfs(2.0)[8A68DA4E-715B-3B79-92A2-DC4769BB94DA]@0xffffff 7f9162d000->0xffffff7f91678fff
            dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7f8 fb24000
            dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7f8f b6b000
BSD process name corresponding to current thread: Finder
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x000000000f000000
Kernel text base: 0xffffff800f200000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 26918346256521
last loaded kext at 303507848045: com.apple.filesystems.smbfs
2.0.0 (addr 0xffffff7f9162d000, size 335872)
last unloaded kext at 334182625740: com.apple.filesystems.msdosfs
1.9 (addr 0xffffff7f9161f000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs
2.0.0
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM  100.14.11
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleBluetoothMultitouch
80.14
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.2fc2
com.apple.driver.AppleMikeyDriver
2.5.2fc2
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.kext.AMDFramebuffer
1.1.4
com.apple.AMDRadeonX3000
1.1.4
com.apple.kext.AMD5000Controller
1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache  35
com.apple.driver.AppleUSBCardReader
3.3.5
com.apple.driver.AppleIRController
325.7
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AirPort.Atheros40
700.74.5
com.apple.iokit.AppleBCM5701Ethernet
3.6.9b9
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.kext.triggers
1.0
com.apple.driver.IOBluetoothHIDDriver
4.2.0f6
com.apple.driver.AppleMultitouchDriver
245.13
com.apple.driver.DspFuncLib
2.5.2fc2
com.apple.vecLib.kext  1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.driver.AppleHDAController
2.5.2fc2
com.apple.iokit.IOHDAFamily
2.5.2fc2
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.iokit.IOAcceleratorFamily
98.7.1
com.apple.kext.AMDSupport
1.1.4
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.iokit.IOSurface
91
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.driver.AppleSMC
3.1.6d1
com.apple.driver.AppleUSBHIDKeyboard
170.15
com.apple.driver.AppleHIDKeyboard
170.15
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IOEthernetAVBController
1.0.3b3
com.apple.driver.mDNSOffloadUserClient
1.0.1b4
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread  1
com.apple.kec.corecrypto
1.0
Model: iMac11,3, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 8 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

Hi,
instead of using smb://Servername use cifs://ServerName for share SMB shared volume error will resolved.

Similar Messages

  • Crashing When Saving Photoshop  File Over Network

    Photoshop & InDesign CS3 crashes whenever I try to save a file over the network to a another shared Mac Pro computer. Another Mac Pro on the network can save to the shared computer without a problem.
    SPECIFICS
    - Three Macs and a 3 PC's on Ethernet network
    -Problem started after upgrading to Leopard
    - I have tried reinstalling the entire Creative Suite without Version Cue
    - Tried deleting the com.adobe.mediabrowser.p.ist and Photoshop.plist preferences.
    - If I create a new file on my computer and then immediately save it, it usually does not crash on the first save. But after I do a few things to the file and then try to save again, it hangs up giving me the spinning pinwheel with the message in the Force Quit dialog window that Photoshop is not responding.
    +- I am unable to force quiet Photoshop; I have to do a hard reboot.+
    Adobe tech support believes it is a network problem, any ideas what might be causing the problem?
    Are there any know issues with Leopard and CS 3 with certain network configurations?

    I have experienced issues with saving photoshop files over a network since upgrading to 10.5.3
    This is a major issue, and one that apple seems quite about.
    See related response on Adobe.com
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403815&sliceId=2

  • I keep having kernel Panics caused when I try to move file from external hd to my mac.

    i keep getting the below panic report when i try to move a movie file from my external hd to my mac. My MacBook Pro runs 10.7.5 the hard drive (HD) is formatter to fat 32 so i can hook it to our xbox. The HD is a 4tb seagate backup + desk media. it is partitioned into 2 two TB  both with fat 32 format. Please help I dont know what to do.
    Interval Since Last Panic Report:  17969872 sec
    Panics Since Last Report:          10
    Anonymous UUID:                    C6F1646E-A185-4CE9-8B6F-546D3AD9BC53
    Wed Feb  4 20:40:32 2015
    panic(cpu 0 caller 0xffffff8000648698): "complete() while dma active"@/SourceCache/xnu/xnu-1699.32.7/iokit/Kernel/IOMemoryDescriptor.cpp:2240
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80920cb9c0 : 0xffffff8000220792
    0xffffff80920cba40 : 0xffffff8000648698
    0xffffff80920cba90 : 0xffffff7f8077ce36
    0xffffff80920cbad0 : 0xffffff7f80774b0b
    0xffffff80920cbb30 : 0xffffff7f808cb95d
    0xffffff80920cbb80 : 0xffffff7f808ccad2
    0xffffff80920cbbd0 : 0xffffff7f80817ea5
    0xffffff80920cbc20 : 0xffffff7f808123a2
    0xffffff80920cbc70 : 0xffffff7f80812b01
    0xffffff80920cbca0 : 0xffffff7f809c5a2d
    0xffffff80920cbd70 : 0xffffff7f80abf7ef
    0xffffff80920cbe00 : 0xffffff7f80abfeec
    0xffffff80920cbe40 : 0xffffff7f80ab5dce
    0xffffff80920cbed0 : 0xffffff7f80ab5fb6
    0xffffff80920cbef0 : 0xffffff800063d4d6
    0xffffff80920cbf30 : 0xffffff800063c250
    0xffffff80920cbf70 : 0xffffff800063c0f4
    0xffffff80920cbfb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOStorageFamily(1.7.2)[40D4AB21-F11E-3C6C-8883-3554F93A251F]@0x ffffff7f80770000->0xffffff7f80794fff
             com.apple.iokit.IOUSBFamily(5.1)[6C8D52C2-CD1D-3DAF-9942-A0AF681D6BBC]@0xffffff 7f809c0000->0xffffff7f80a15fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.driver.AppleUSBXHCI(1.1)[7816EC3D-018B-3E21-9746-55AD82241C03]@0xffff ff7f80aaf000->0xffffff7f80ac3fff
                dependency: com.apple.iokit.IOUSBFamily(5.1.0)[6C8D52C2-CD1D-3DAF-9942-A0AF681D6BBC]@0xffff ff7f809c0000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f8080e000->0xffffff7f80838fff
             com.apple.iokit.IOSCSIBlockCommandsDevice(3.2.1)[9E8FB189-DF4F-337A-A3C5-8BD172 5C205C]@0xffffff7f808cb000->0xffffff7f808dffff
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f8080e000
                dependency: com.apple.iokit.IOStorageFamily(1.7.2)[40D4AB21-F11E-3C6C-8883-3554F93A251F]@0x ffffff7f80770000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 268173437187
    last loaded kext at 44259693880: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f80874000, size 57344)
    last unloaded kext at 153413605524: com.apple.iokit.IOUSBMassStorageClass 3.0.3 (addr 0xffffff7f80a16000, size 69632)
    loaded kexts:
    com.bresink.driver.BRESINKx86Monitoring 8.0
    at.obdev.nke.LittleSnitch 2.4.4
    com.apple.filesystems.msdosfs 1.7.1
    com.apple.driver.AppleMikeyHIDDriver 122
    com.apple.driver.AGPM 100.12.75
    com.apple.driver.X86PlatformShim 5.0.0d8
    com.apple.driver.AudioAUUC 1.59
    com.apple.driver.AppleHDA 2.2.5a5
    com.apple.driver.AppleMikeyDriver 2.2.5a5
    com.apple.driver.AppleUpstreamUserClient 3.5.9
    com.apple.driver.AppleIntelHD4000Graphics 7.3.2
    com.apple.driver.SMCMotionSensor 3.0.2d6
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.driver.AppleSMCLMU 2.0.1d2
    com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AudioIPCDriver 1.2.3
    com.apple.driver.ApplePolicyControl 3.1.33
    com.apple.driver.AppleLPC 1.6.0
    com.apple.driver.AppleBacklight 170.2.2
    com.apple.driver.AppleMCCSControl 1.0.33
    com.apple.driver.AppleIntelFramebufferCapri 7.3.2
    com.apple.driver.AppleSMCPDRC 5.0.0d8
    com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
    com.apple.driver.AppleUSBTCButtons 227.6
    com.apple.driver.AppleUSBTCKeyboard 227.6
    com.apple.iokit.IOUSBAttachedSCSI 1.0.2
    com.apple.driver.AppleIRController 312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 33
    com.apple.iokit.SCSITaskUserClient 3.2.1
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCISerialATAPI 2.0.3
    com.apple.iokit.IOAHCIBlockStorage 2.1.0
    com.apple.driver.AppleFWOHCI 4.9.0
    com.apple.driver.AirPort.Brcm4331 561.7.22
    com.apple.driver.AppleUSBHub 5.1.0
    com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
    com.apple.driver.AppleEFINVRAM 1.6.1
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleAHCIPort 2.3.1
    com.apple.driver.AppleSDXC 1.2.2
    com.apple.driver.AppleUSBEHCI 5.1.0
    com.apple.driver.AppleUSBXHCI 1.1.0
    com.apple.driver.AppleACPIButtons 1.5
    com.apple.driver.AppleRTC 1.5
    com.apple.driver.AppleHPET 1.7
    com.apple.driver.AppleSMBIOS 1.9
    com.apple.driver.AppleACPIEC 1.5
    com.apple.driver.AppleAPIC 1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
    com.apple.nke.applicationfirewall 3.2.30
    com.apple.security.quarantine 1.4
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
    com.apple.driver.DspFuncLib 2.2.5a5
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSurface 80.0.2
    com.apple.iokit.IOFireWireIP 2.2.5
    com.apple.iokit.IOSerialFamily 10.0.5
    com.apple.driver.AppleHDAController 2.2.5a5
    com.apple.iokit.IOHDAFamily 2.2.5a5
    com.apple.iokit.IOAudioFamily 1.8.6fc18
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleSMBusPCI 1.0.10d0
    com.apple.driver.AppleGraphicsControl 3.1.33
    com.apple.driver.X86PlatformPlugin 5.1.1d6
    com.apple.driver.AppleSMC 3.1.3d10
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.3.4
    com.apple.driver.AppleSMBusController 1.0.10d0
    com.apple.iokit.IOGraphicsFamily 2.3.4
    com.apple.driver.IOPlatformPluginFamily 5.1.1d6
    com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
    com.apple.iokit.IOBluetoothFamily 4.0.8f17
    com.apple.driver.AppleUSBMultitouch 230.5
    com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
    com.apple.iokit.IOUSBHIDDriver 5.0.0
    com.apple.driver.AppleUSBMergeNub 5.1.0
    com.apple.driver.AppleUSBComposite 5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
    com.apple.driver.AppleThunderboltNHI 1.6.0
    com.apple.iokit.IOThunderboltFamily 2.0.3
    com.apple.iokit.IOFireWireFamily 4.4.8
    com.apple.iokit.IO80211Family 420.3
    com.apple.iokit.IOEthernetAVBController 1.0.1b1
    com.apple.iokit.IONetworkingFamily 2.1
    com.apple.iokit.IOUSBUserClient 5.0.0
    com.apple.iokit.IOAHCIFamily 2.0.8
    com.apple.iokit.IOUSBFamily 5.1.0
    com.apple.driver.AppleEFIRuntime 1.6.1
    com.apple.iokit.IOHIDFamily 1.7.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 177.11
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.DiskImages 331.7
    com.apple.iokit.IOStorageFamily 1.7.2
    com.apple.driver.AppleKeyStore 28.18
    com.apple.driver.AppleACPIPlatform 1.5
    com.apple.iokit.IOPCIFamily 2.7
    com.apple.iokit.IOACPIFamily 1.4
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353737334448302D434B302020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353737334448302D434B302020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi 2, AirPort, en1
    Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Backup+  Desk, 0x0bc2  (Seagate LLC), 0xab31, 0x14900000 / 1
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9

    It's likely that the drive is malfunctioning or that there is an internal hardware fault, but to confirm, see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When saving photoshop file in PDF, my document changes, how do I solve this?

    Hello everybody,
    Im trying to save my CS6 files as PDF documents. When I save my files as PDF some texts or images disappear or deform.
    Is there anything i'm doing wrong?
    Is there a setting I need to change for saving my files so they don't change?
    Thank you for your help!

    Hi,
    Which operating system and version of photoshop cs6 are you using?
    You can find out the exact photoshop cs6 version by going to Help>System Info from within photoshop and looking at the very first line that says Photoshop Version.

  • Strange White Areas When Saving Photoshop File as a .pdf File ??? NEED HELP

    Using Photoshop CS5 -- I saved a Photoshop file I created as a .pdf file but some of the areas on the .pdf file (specifically, sections of text) do not have any of the color/fill information, they are just white (blank areas).  I've seen this before when converting other Photoshop files and could not find a work around.  I tried saving with various compression levels (max, high, med) and it makes no difference.  I’m not a techie or graphic designer, just an average Jane, so I need information and advice that I can understand and apply.  See attached image.  Thanks!

    That does sound a long way round.  The usual trick when layers don't do what you expect them to do, is to make a Copy Merged layer at the top of the stack.  Shift Alt Ctrl e (Shift Opt Cmd e). 
    I can see you have quite a few layers there, but you could problably track down the problem by Alt clicking each layer's Eye icon in turn to view them with everything else turned off.  When you find the culprit, Alt click it's Eye icon again to turn the other layers back on again.

  • The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

    The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
    Hi There,
    The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
    I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
     Context where exception was caught:
    Func:
    CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
    cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
    Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
    User Name     : slaney
    OS Version    : 5.1.2600 (Service Pack 3)
    Exception Code: C000001E
    Exception Addr: 457BC448
    Return Address: 457BC448
    Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
    Module Name   : FieldPoint71
    Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
    Source File   : (not available)
    Return Address: 481000C3
    Function Name : (not available)
    Module Name   : (not available)
    Parameters    : 00000000 00000000 00000000 00000000
    Source File   : (not available) 

    Hi,
    I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
    These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
    If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
    Let me know.
    DirkW

  • Kernel Panic caused by Nvidia GeForce 7300 GT after Upgrade

    Kernel Panic caused by Nvidia GeForce 7300 GT after Upgrade
    Mac Pro 2,66 Ghz Dual Core Intel Xeon
    driving 2 Apple Cinema Displays 23 (out of order since update) and 30
    running Mac OS X Lion 10.7.2
    Hi I'm Phil from Germany,
    and I have the same problem like many others here:  https://discussions.apple.com/thread/1541589?tstart=0
    caused by the Nvidia GeForce 7300 GT after combined Upgrade by Apple.
    Started with frozen desktop, and ended with a permanent Kernel Panic after a reeboot.
    - Safe mode is not running
    - System CD is not running
    - Apple Hardware Test is ok.
    - tried the newest 7300 firmware update
    - I have double checked the RAM, and HDD and disconnected all external equipment several times.
    System.log at startup ends with the folling permanent Problem:
    Previous Shutdown Cause:3
    NVDANV40HALG7xxx loaded and registered.
    DSMOS has arrived
    After running my Mac Pro in Target Mode (Fire Wire Connection with my MacBook Pro) I found the Problem-Folder of the 7300 GT:
    File:  HD/SYSTEM/LIBRARY/EXTENSIONS/NVDANV40HalG7xxx  inside my library and erased them......
    NOW MY SYSTEM IS RUNNING AGAIN, but I can't run my System-CDs without a kernel panic,
    Time Machine runs without the Starfleet-Background, and my second cinema display still doesn't work any more!
    After spending several hours in front of my Mac Pro I'm sure that all of my hardware works fine.
    NOW I THINK THE PROBLEM IS: I have to change my ROM-Version on my Nvidia GeForce 7300 GT and install the Firmware 3008.
    So how does it work and where can I get this Firmware? Or how can I run an Downgrade from 3011 to 3008?
    ANY IDEAS ....or similar cases?
    WOULD BE GLAD TO GET SOME HELP!!!!!

    Thanks Hatter
    I'm sure that an ATI 5770 would solve my Problem...and maybe I could save a lot of my time?
    But why I should spend 250 € on a new Graphic Board when the old one isn't broken?
    Especially when the problem wasn't caused by me.
    I need the old firmware, because my System runs with my GT 7300 after removing the software part listed above. Only one of the firmware components that had been updated won't fit in connection with the newer OS X Versions.
    I'm also sure that the Problem must be on the Graphic Board, because my System-CD isn't running while pushing the "c" button.

  • Adobe bridge crashes when saving illustrator files

    Hi there,
    We are developing custom connector using Adobe Drive SDK for our DAM system, the integration with CS was working fine, we recently updated Adobe Drive to 4.2, and we are encountering bridge crashes when saving illustrator file. It didn't happen with older version(4.0.2) of Adobe Drive, not sure why. I pin point the part that causing the issue: in our custom connector, we have READ_XMP_METADATA capability which we need to display the thumbnails and previews, and in the ftp sample connector, this capablity is not included originally, so the issue does not happen, but if I add this capabilty, the crash issue happens as well. If we exclude this capablity from our connector, this crash issue doesn't happen.
    We noticed this only happens when saving illustrator file, not photoshop or indesign, and it seems that only in illustrator, when save, and the bridge has the current file folder showing, we are seeing there are twice folder refreshes, and usually it will crash after the second time. In photoshop and indesign, we don't see folder refreshes. If switch to other folder, the crash won't happen. We tested on both windows and Mac, on Mac, this seems happen less often. Another thing we noticed is in debug mode, or we have many debug logging turned on, the crash happens less often, if it is deployed with no debug logging, the crash happens almost everytime. So we are guessing it might be some synchronization problem. 
    Could you please advice what's the cause of this issue?
    Thanks,
    Katherine

    Has it ever worked?
    What kind of files are they and where do you save them?
    Is a printer connected, set up and turned ON?
    Have you already tried resetting the preferences?
    Generally it's not a good idea to just save old files, because then some artwork may be automatically flattened. Illustrator will save the file to the old version file-format and if you used new features in-between, those cannot stay live in the old version file format.

  • FrameMaker crashes when saving a file as XML

    Hello -
    I am encountering a problem saving a .fm file as a .xml file. I have saved many .fm files as .xml files in the past with no issues. However, lately FM crashes with a "serious error" on certain files when I try the same save process. My initial thought was that the file was somehow corrupted, but this morning I ran into this scenario: I have 3 FM licenses in my office, I was trying to save a .fm file as .xml and FM kept crashing. So I had another co-worker try to save the exact same file as a .xml file and it WORKED!?!?!?!
    We all were using FM 11, but I have since installed FM 12 thinking that version 12 wouldnt have the same problem, but the same issue is happening with both versions of FM. I read that FM has issues when working across a network so I have tried it both ways, across the network and locally and the same issue occurs.
    Again, this problem occurs occasionally on various files - not every file, but as previously mentioned I was able to successfully save a file on a different machine that I could not save on my machine. I have the most recent log file that was generated after a crash:
    [*** LOG FILE REMOVED BY MODERATOR***]
    Thanks in advance for any help in this matter.
    Gavin

    An update -
    So FM now appears to crash "sometimes" when saving as an xml file AND when saving the file in general. I have 3 machine with FramMaker installed, first with version 11 now with version 12. These 3 machines are all identical as far as SW running on them, etc... I have been unable to detect a pattern as to when FM will crash thus far. Sometimes it will crash when I try to save the file as an .xml file and sometimes it will save just fine. I have resorted to marking up the document a little at a time, saving the file, then trying to save as an XML file. It will work sometimes and other times it will crash. Sometimes it crashes when trying to save the .fm file other times it works; sometimes it will crash when I try to save the .fm file as a .xml file, other times it will work. About the only thing in common that I have found thus far is the fact that it happens with the same file over and over again; meaning that if I have a pool of 12 files that I need to load into FM and markup, 11 of the 12 files may work just fine and the 12 file will not - it will crash FM at some point in the markup/saving process every time. One might guess that the original file is somehow corrupt and that may be, but at this point I am not sure how I prove that is the case as FM seems to load it in just fine and I can save it right off the bat just fine. Does anyone know how I can prove that the structured file i receive initially is corrupt when it loads into FM fine? If we were causing some issue with the import of our modified EDD then why dont we have the same issue with the other 11 files in the batch as they all are using the same EDD?
    I have sent my most recent log files to adobe tech support this morning. I have tried saving files on shared drives as well as on local drives. I have tried the same process on the other workstations with the same results.
    Does anyone have ideas on how I can isolate a problem with the source file (structured doc) or on why FM is crashing when I perform these actions?
    Thanks,
    Gavin (Ryan)

  • Excel Hangs when saving a file

    Hi
    When saving a file (CTRL+S) excel hangs, no error or anything.
    This happens on Windows 8 PRO, on Win7 no problem at all.
    Tried on EXCEL 2010 and EXCEL 2013 Customer Preview.
    Checking the file after the app crash shows no file exists however 2 files exist instead:
    *.TMP file
    *.[NOTHING] file
    The *.TMP is the new file i just saved, if I change it to *.XLSX it works fine, no curroption.
    This was done saving on DESKTOP.
    Since file was saved I assumed there is some kind of permission error so I changed the directory permission for "C:\Users\MYUSER\DESKTOP" to "EVERYONE".
    With this setup excel saves without a problem....
    I guess EXCEL tries to save under  a different user which has no permission but why no error?
    Any ideas?

    Hi,
    Check to see whether the user you logged on to the system has the permission to the file.
    Also, check to see whether the following link is helpful:
    http://support.microsoft.com/kb/271513
    http://support.microsoft.com/kb/313937
    And, based on my research, hang when saving the file also maybe caused by a printer installation.
    Check to see the following link:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
    Jaynet Zhang
    TechNet Community Support

  • Keep getting kernel panic even when everything is updated

    My MacPro keeps having kernel panic (4x in a week, then none in almost 2 weeks, then comes back again today) even when everything is updated. And I recognize that I always get the kernel panic only when I visit this one website where I usually go to stream an online movie. What could be wrong with my Mac? Is there a way to stop and/or prevent future kernel panic attack?

    Safe Mode
    Starting up into Safe Mode does several things:
    It forces a directory check of the startup volume.
    It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
    It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
    It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
    It disables all startup items and login items (Mac OS X v10.4 or later).
    Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.
    Taken together, these changes can help resolve software or directory issues that may exist on the startup volume.
    Try Repair Disk.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8492.html

  • Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    When you save a file that's what options offers application
    05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
    sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link.

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • When saving a file i don't see the progress

    When saving Numbers files I use to see the progress of the save.  I no longer see its progress.  The files are being saved.  Any reason why this is happening??
    tj

    I'm on OS X 10.7, your profile says you're on 10.6.8, so i can't duplicate what you are seeing. If I was to guess, I'd say it is related to changes made for Lion where versions are  periodically saved automatically in the background, where you wouldn't want a progress window always popping up. "Save" has become "Save a Version" and, though I hadn't noticed, probably also does not pop up a progress window..

  • Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    ASk in the ID forum and explain better what you actually mean.
    Mylenium

Maybe you are looking for