Key figure not exist in infoprovider

Hi,
in what situation can a keyfigure exist in a query designer but not belonging to an infoprovider?
When i tried to launch a BEx query, i got system message about the above.
There is aggregation level under which there is multiprovider under which there are basic and real-time cubes.
regards
Prex

Dear
When you want to report some attributes as navigational attributes of a certain characteristics, then, you will mention that Chracteristics as data target and use it in report through multiprovider.
Thanks

Similar Messages

How to find key figures not created in a Structure.

After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.

Thanks for such a quick response.
I am assuming the following about the table :
-     Column u201CCALDAYu201D contains a date value for each day the Index is active.
-     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
-     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
-     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
-     Column u201CBIA_TECHINAu201D ????????
-     Column u201CBIA_INAu201D ???????
-     Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks

Error while connecting to ATE DecryptPasswordError "Key does not exist",,,

Dear All,
While trying to implement Syclo Service Manager with SAP CRM , I am trying to start the ATE (Agentry Test environment) on Windows after getting connected to the development server. However, I am getting the below error after I give my user ID and password on ATE login pop-up.
DecryptPasswordError <"Key does not exist",,,>
It initially says that the password is incorrect and asks if we would like to connect to the server instead. When I click on "Connect", the above mentioned error is displayed.
Can you please help me with this. As a matter of fact, in the past, I have been able to connect to ATE without any issues, but not sure what could be the problem this time.
Any quick help is highly appreciated.
Regards,
Ashish Dhagat
Tags edited by: Michael Appleby

Hi Ashish
Without seeing the rest of the logs, I'm assuming you are getting some kind of logon error.
If so, this error can happen if the the Agentry Server fails to load the "cryptography context and key container". This can be found by viewing the Startup.log files located in the LOG folder in the running Agentry Server folder.
The following is an example of the Startup.log:
     05/05/2009 12:50:55, 0, 0, 2, Thr 2120, Key container does not exist, attempting to create a key container.
     05/05/200912:51:02, 0, 0, 2, Thr 2120, Failed to acquire cryptography context and key container. 05/05/2009 12:51:02, 0, 0, 2,
     Thr 2120, Error 2148073487 loading cryptography key
This issue is caused by the User that started the AgentryServer.gui (or LOCAL SYSTEM if running as a Service) which means the user does not have access to the MachineKeys folder. The user needs to have full access to the following folder:
               C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\MachineKeys.
If running as a Service, the user should confirm the logon account.
To change the Logon account from Local System Account to 'This Account' option (needs to be an admin account):
Go to Control Panel->Administrative Tools->Services.
Right click on the appropriate service and select 'Properties'
Select the tab 'Log on'.
Click the radio button next to 'This account'
In the field next to 'This Account', enter ID used for logging into Windows (admin account)
In the Password and Confirm Password fields, enter password associated with the Windows login ID
After verifying that the user has full access to the folder, restart the Agentry Server, and with a cleared client, connect to the Server.
Let me know if this helps.
Thanks,
Ray

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Unexpected error;Primary key does not exist:CmscdomPK version=2,name=J2E

Hi I am getting the following error when i try to access the CMS related WebDynpro application.
First time i am able to access the CMS.I created the domain and track.after that i edited the Domain tab with new domain name J2E.During that time i tried to save the domain,its throughing the Primary key does n't exist error.I closed the application.Again when i tried to access the CMS.Its throughing the following error.
<b>Error stacktrace:
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - Primary key does not exist: CmscdomPK version=2,name=J2E
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
     at com.sap.cms.ui.wl.Custom1.hasTracks(Custom1.java:860)
     at com.sap.cms.ui.wl.Custom1.wdDoInit(Custom1.java:277)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdDoInit(InternalCustom1.java:990)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doInit(DelegatingCustomController.java:73)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:374)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:403)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.initAttributeMapping(AttributeInfo.java:596)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:456)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:373)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)</b>
What causing the problem.I am not finding the way,where can i rectifything problem
Regards
Usman

Hi Usman,
Domain ID and CMS Server ID are also stored in the SLD when you create these for the first time. As of now you can just create one Domain and One CMS Server id.
If you have to edit it you may have to do the following.
1. Delete all the tracks under the domain id and the CMS server id.
2. Then in SLD. go to HOME -> CONTENT BROWSER -> SUBSET = LANDSCAPE DESCRIPTION
In the CLASS dropdown please select Change Management Domain. Select the domain that you had created and delete it.
Again in the CLASS dropdown select Change management Server. Select it and delete.
Note: Please ensure that all the tracks have been deleted before you delete SLD entries.
Now login to CMS again and create the Domain and CMS server again.
If possible please try this some where on a test machine if possible and then try in actual scenario.
Hope this helps.
Regards
Sidharth

The specified registry key does not exist

I recently reinstalled DPM 2012 R2 (fully updated) after deleting the protection groups, database, wiping the tapes, everything and reconfigured everything from scratch after it became too unstable to use. Unfortunately since then I've found that the
MSDPMCurr.errlog is full events that look like the following:
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
Ignoring exception in ReadRegistryKey System.IO.IOException: The specified registry key does not exist.
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Win32.RegistryKey.GetValueKind(String name)
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Internal.EnterpriseStorage.Dls.Utils.ApplicationSettings.ReadRegistryKey(String registryKeyPath, String registryKeyName, Int32 registryValueKind)
Unfortunately it doesn't tell me what registry key it's looking for so I can't find out if it exists. Is there any way of finding this out?

Thanks for the advice, I found the vast majority of them were for cache entries and agree that these can be safely ignored.
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CacheInquiryResults\<protected server FQDN>
However, I also found the following:
HKLM\Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\gnorableSqlErrorNumbers
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CloudBackupEnabledApps
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{8AB21D86-21F0-430A-9AD1-2D90077104C3}
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\UI
All of these are missing from the registry is this likely to cause any issues?
Edit: also found this repeated in a DPMRACurr.errlog:
0E08   16CC   03/09   08:30:03.323   05   genericstatus.cpp(1256)   [0000000003C32AA0]   ED0A1862-1405-438A-ABC8-22CFD64C278E   NORMAL
Wait for CallUpdateQfesInstalledRegKey succeeded. Returning m_QfesInstalled = 31
0E08   16CC   03/09   08:30:03.338   03   schannelutils.cpp(129)       ED0A1862-1405-438A-ABC8-22CFD64C278E   WARNING
Failed: Hr: = [0x80070002] : Error trying to open RegKey [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\Certificates\<FQDN of backup server>]

Confirmation control key does not exist

There is a old one PO, which was created with confirmation control key ZSC1 ; Now issue is ZSC1 has been deleted but it is showing in po, now user want to close the po as want to ticked the "delivery completed" ind. in the Delivery tab page at Item level in the po.
In this cas he is facing the error as "Confirmation control key does not exist" so:-
1. How can be close the po.
2.Is there any option, from where we can check the change control i.e. can be checked when ZSC1 was deleted.

Hi Jurgen,
I think you misinterpret regarding this issue.
confirmation control key is not deleted in PO.
It is deleted from configuration setting I mean from IMG -> Material Management -> purchasing -> confirmation -> Setup confirmation control.
since it's exists in po but not in config. thats the reason system given us that error.
so my question was:-
how to get change control for the same, i.e. when it was deleted from config. setting
And how set del. completed ind. in po for closing the po, bcoz it's showing error as "Confirmation control key ZSC1 does not exists"

Object referred to by the object key, does not exist

I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
    The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
    The function terminates.
Procedure
    If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.

Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto

Restricted key figure not populating data

Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.

Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.'

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Disaggregation of Key figure not in proportion at monthly bucket

Dear Expert,
Please find the below case.
Here Key figure 2 is disaggregated based on Key figure 1 (Calculation Type P) also we maintained Time based disaggregation K.
The issue is - if you check total, it is 13 for both key figures as shown in below screen shot.
But region wise (Detail level) if you checked, it is not in 1:1 proportion and it is causing problem for us.
For example Region 2 having value in KF1 as 2 for Week 11.2015 but after disaggregation it got nothing on KF2.
(The reason is Key figure 2 is having value in week 12 and week 13 and nothing in Week 11)
We tried 2 different approach to get 1:1 proportion in Monthly bucket, but it could solve our problem.
Approach 1-After Key figure2 calculated in Weekly bucket, Reset Key figure 2 at total level in Monthly data View and enter the Total of Key figure 2 at Total level in Monthly bucket.Check the result at detailed level.
But in this case it is calculated for week 10, 11, 12 and 13 as 0, 9, 3, 1. (We want Key figure2 as per original calculation i.e it should be 12 and 1 in week 12 and 13 respectively)
Approach2 -
Approach 2 - Add another New Key figure as Key figure 1 Total- which sum the Key figure1 at detailed unit at Month level and then disaggregation of Key figure2 based on this new KF.
Its working for this scenario but different scenario is not working.
For example- here region 3 and 4 affected.
If disaggregation at Month level is corrected, our issue will be resolve.
Waiting for your feed back.
Thank you
Sachin

Hi,
In Planning Area u2013 Key Figure settings, did you try to use u2018N - No disaggregation in timeu2019 for KF2 key figure ?
This will mean that copying will occur in technical periods of the storage bucket profile and not the way it happens now.
Other option:
Now, you storage bucket profile and also the planning bucket proifile are in Days/Weeks/ .Months
Is it necessary for your user to view data in daily buckets ? Can the user view the data in weekly buckets only (and not in daily buckets) ?
Your planning bucket profile can be in Weeks/..Months .
This way your displayed data will be in weekly buckets.
Regards
Datta

Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

Key Figures not showing up in the Query disigner

I added a key figure to a characteristic as an
attribute, but it is not showing up in the Query designer
any idea why
Raj

Hi RajShekhar,
This KF that you have added as an attribute to a char will not be available in the Key Figure section. Open the dimensions and find the char for which you created this attribute. Open up the attributes under it and you should find the KF. If you need to use this KF value in a calculation, then you will need to create a formula variable to pull in its value.
Hope this helps...

How to filter Key Figures - not using the GUIDs

An example How to filter Key Figures may look like this:
http://XXX.com:8000/sap/bw/BEx?sap-language=DE&bsplanguage=DE&CMD=LDOC&TEMPLATE_ID=XXX&FILTER_IOBJNM=41F68RV4ZB5VYSARODYU70CAQ&FILTER_VALUE=41F68SAI18DB01DO023IR49QA
The GUIDs consume the space in the URl. Is there a way to work with an alias.
To use the technical name of a Key Figure defined in the Query does not work.

Hi Cherie,
This is exactly the type of problem that I'm currently trying to figure out. I'm trying to following your solution but I'm not clear on how you actually achieved this in you last note. I want to dynamically select actuals/budget column fields based on what period I enter. I thought about creating 12 separate RKF fields for actuals and 12 separate RKF fields for the budget reforecast and outputting these all and then doing some VBA to hide the fields not required based on which period was selected... how is your variable ZFYAPER7 defined and calculated?
Cheers

Key figure not displaying in SNC Web View

Hi All,
I have added a Key figure in Data Matrix View and its not displaying in SNC Web view- SMI Monitor.
Is there any activation settings after adding key figure in Data Matrix View, please help.
Regards,
Vikram

Hi,
You can try following steps,
1) Clear the Cache & Re-login.
2) Ensure in Setting the Key figure " Invisible" check box is not selected.( SNC 7.0 v)
3) Check the related Product is applicable for the new Key fig added, like if its a SMI Product & you are expecting to see for a PO key figure...
Regards,
Vasu

Key figure not exist in infoprovider

Similar Messages

Maybe you are looking for