Key figure units in fact tables of InfoCube are blank

I run RSRV - Key figure units in fact tables for my cube and found the following error message. I found one SAP note 941895 - RSRV test fails with unknown error, but our system status is SAPKW70020, so this note is not useful to our case. Pls advise!
System message:
The test Unit of key figures in fact tables for InfoCube XXX initial had to be terminated due to an unknown error (RSRV320).
Many thanks!
rajatina.

Hi Raja,
Check that in your transformation you have mapped Unit from source system to this key figure. If not then you will have to do the mapping and reload the data. If you are not able to get unit from source system then atleast you will have to assign some constant Unit if possible.
Regards,
Durgesh.

Similar Messages

  • Key Figure units in Fact Table - Error

    All -
    When a run a report off of a cube, some row display 0 when there are corresponding values in my cube.  The report doesn't agree with LISTCUBE.  I have ran transaction RSRV on my cube and tested the "Key figure units in fact tables of Infocube" and I get an error saying that 1380 units are missing from fact table.
    <b>Diagnosis
    In the fact table /BIC/FEU_FRCTS records have been found that contain values other than zero for key figures that have units, but that have no value for the unit of the key figure. Since the value of the unit has to correspond to the value of the key figure, this inidicates an error when the data was loaded. The values of the units have not been loaded into BW correctly. Choose Details to display the incorrect records.</b>
    Does anyone know what this error means? How do I solve this problem?
    Thanks,
    Nyrvole

    hi Nyrvole,
    as the message said, you have keyfigures with unit but the unit value not filled, click 'detail' as suggested to check which keyfigure(s) involved, that go to rsd2 type in that keyfigure and see which infoobject unit is used, then check transfer/update rules how this unit infoobject mapped, try correct the values and upload again.
    there is option 'repair' in rsrv but think in this case it can't fix the error, just try.
    hope this helps.

  • Fact tables in Infocube

    How many tables Exact Contain in Info cube?
    Please search the forum
    Edited by: Pravender on Sep 16, 2011 12:31 AM

    Hi Mahesh,
    For Basis InfoCubes in SAP BW, there are two fact tables for
    including transaction data: The F and the E fact table.
    Unlike the E fact table, the F fact table contains the information
    about the request from where the transaction data originates
    When loading data (when receiving requests), the system writes data
    into the F fact table.
    During "compression", the system summarizes data from different
    requests and writes it to the E fact table.
    To ensure good reporting performance, it is important that you only
    keep data from a few requests in the F fact table, which means that you
    should compress requests as soon as possible.
    Also bear in mind that deleting transaction data according to the
    request is only possible from the F fact table, as only this table
    contains the information regarding which data belongs to which
    request.
    You should therefore compress a request as soon as you are certain
    that the data loaded is correct. When you install BW on an ORACLE database, BITMAP indexes are created on the fact tables to improve the reporting performance of the system
    And yes try to search on help.sap, there is plenty of information.
    Regards
    Sunny

  • How to create unique key column in ROLAP fact table?

    Hi all,
    Is there a way to create a single column primary key (or unique index) on my ROLAP cube (and fact tables) in OWB? if so, what I should do in my mappings?
    Thanks!
    - Andrew

    Have you all conformed dimensions between the two facts?

  • APO key figures - units of measure

    I am using APO V5.1.
    Via RSA1 I have created a key figure of data type Quantity and unit = 0UNIT.
    I have assigned this key figure to my planning area and planning book.
    The planning area has unit of measure = CAS, and this is the unit of measure shown for my new key figure in interactive planning.
    How can I change the unit of measure for my new key figure to D(ays)?
    Thanks for any advice...

    Datta,
    Thanks for this reply.
    I have followed your advice...
    I have a key figure with data type 'Number'.
    In interactive planning, this key figure is appearing with a blank uom.
    In the planning book design, on the 'key figure attributes' tab, I cannot however make any changes to the key figure attributes including uom, as they are greyed out.
    Any ideas on this?
    Thanks...

  • Dimension ids are 0 in fact table of infocube

    Hi ,
    We have cube in which we have have dimension A which has two chars stocktype (non masterdata).
    and stock category(non masterdata).
    When I checked the fact table of the same cube I could see that the DIM ID for A is maintained as 0 for all values.
    In this case how does the DIM IDs get linked to the fact table.
    Please explain.
    Thanks.
    Ramesh

    Hello Ramesh
    DIM ids are combination of SIDs.  Please check whether those two InfoObject have "Attribute Only" option checked in InfoObject maintenance.
    If that is the case , then there will be no SID table generated for these two InfoObjects and if no SID is there, there can not be any DIM id.
    But I was wondering why this if these are Attribute Only then why did system allow you to add them in dimension.
    Another possibility, you did not get any data for these two field in this cube , so it did not check SIDs and generated DIM ids.
    Do you have value for these two fields in the cube?
    Regards
    Anindya

  • Joining two fact tables for subject area

    When I tried to use two simple fact tables joined by a dimension, I am getting the “ No fact table exists at the requested level of detail” error in the answer when I try to pull the columns from Fact 1 and Fact 2 tables. I have set the content in both the fact table to lowest granularity of dimension with CUST_ID, RAT_ID, ACT_ID keys. We have one to many relationships between dimension and both the fact tables. Any feedback is highly cherished.
    Fact1: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
    Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev1, Transaction Date
    Fact2: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
    Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev2, CreationDate
    Dimension keys are CUST_ID, RAT_ID, ACT_ID
    Thanks,
    uday

    Hi LC,
    We have to add two fact tables F1 AND F2 to an existing bmm. These fact tables have history tables F11 AND F22 and we have to use partition logic for this.How you did partition ? you should be using Fragmentation logic for that any how you will add the F11/F22 tables to F1 and F2 LTS , so when you join F1 & F2 to the common dimension then it should work for the calucluated measures but dont forgot to create hierarchies and specify the content levels for the fact tables
    Thanks,
    Saichand

  • The fact table of InfoCube 0OPA_C11 is missing 2 secondary indexes

    Hello experts,
    in RSRV i got the above mentioned message for my InfoCube 0OPA_C11. Before I tried to delete, repair and build up my indices in performance tab of the InfoCube.
    I followed SAP Note '401242 - Problems with InfoCube or aggregate indexes'.
    -> SAP_INFOCUBE_INDEXES_REPAIR repaired indexes and show no further problem, but problem still exists, in performance tab light is red and RSRV brings same message.
    Does someone have any idea what further I can do?
    Best regards,
    Peter

    Peter, refer to note 928037, it's FAQ about MaxDB indexes. I gave it a quick reading and I believe the answer to this issue lies beneath this doc! There are ways to check consistency of individual index, bad indexes and ways of eliminating them.
    Also, refer to the below blog. Check the status of the secondary index in this case. I suspect they are bad or missing. There are ways to recreate them. Keep your basis guys in the loop.
    http://wiki.sdn.sap.com/wiki/display/MaxDB/MaxDBIndex%28Secondary+Key%29
    Hope this helps.
    Edited by: Mann Krishna on Sep 10, 2010 3:50 PM

  • Table FAGLFLEXT - Functional Area blank for plan assessment cycle (result)

    Hi all,
    I have query regarding table FAGLFLEXT. We have plan data and need to report our plan data based on functional area and profit centres. Plan assessment was run and this is allocation from a cost centre to WBS.
    In table FAGLFLEXT for this line items there's 2 lines created and in one of the line item the functional area is blank.
    Is this a bug or is this standard SAP? Does anybody has experience on this table?
    thanks

    Refer to note 1024480 and see if the situation applies to your system.

  • Table ANLP/ANLQ are blank

    < MODERATOR:  Message locked.  Please post this message in the [Asset Accounting forum|SAP ERP Financials  - Asset Accounting;. >
    Dear all,i want to use table  ANLP / ANLQ to carry out monthly posted depreciation or monthly planned depreciation,but no data in those 2 tables,is it correct?
    highly appreciate your advise

    Hi,
    Yes you are right. When depreciation will be run on monthly basis, such table will be updated
    Regards,
    Jigar

  • Calculating Key Figures in Copa based as sales Rev / Cusomter Price Based

    Hello Gurus,
    I have a requirement in which i would like to calculate some key figures in COPA as sales revenue.
    I would like for e.g to calculate the following: Cusomter Price Based Discount but do not know what to take into consideration.
    Is there any document which can help me to build it?
    I have  created the generic datasource based on the table CE1XXXXX.
    Thank you

    Hi Anindya,
    thank you for replying.
    The steps in that document was already being done.
    I have all Key Figures comin from CE1xxx Table. We are using the cost based COPA.
    My problem now is to build some Key Figures as sales revenue (Sales View) like for e.g Cusomter Price Based Discount.
    I would like to know how to proceed to build them. Any sample?
    Is it possible to build them directly based only on the generated extractor? or should i have to take dta from Billing as well?
    Thank you.

  • Adding the Extra Key Figure in Infocube which has already data.

    Hi BW Experts,
    We have Purchasing Data Cube (0PUR_C01). I have already loaded the data into Infocube.
    And we have made some reports on Purchasing Cube.
    Now user wants a modification in the report.
    He wants a extra information in the Report. But that information will be coming from one KEY FIGURE. But this Key Figure is not there in Our InfoCube.
    But This Key Figure is there in our Transfer Rules.
    I can add the Key Figure in Infocube. But already data is there in our Infocube.
    I dont want to delete the data from Infocube. 2 crores records are there.
    Please can any one tell me the solution for the further process.
    Please help us with the solution.
    Thanks & Regards,
    Anjali

    Anjali,
    If you are using BW 3.x version then you have to delete the data if you want to add a new Key figure, In this case you need to create a cube from copy as option and load the data into that cube and you can enhance the cube with a new Key figure..
    If you are using BI 7 then you can do that in RSA1 -> administation Sub function area -> Remodelling option
    <Stop asking for points on each reply>
    Thanks,
    Gattu
    Message was edited by:
    Moderator

  • Could not release my own Key Figure from DP to SNP

    Hi SAP Experts,
    As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
    I added these Key Figures to DP Planning Area with name Z_DPPlan01.
    I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
    After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
    Question is:
    How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026)  so that we can release all three above Key Figures from DP to SNP?
    Thanks very much for your help!
    Duyennx

    Dear Pawan,
    2 . The business requirements are:
    Our customer is a bank that has many branches. They want to forecast for each branches:
    - The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
    - The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
    Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
    90 is the number of days in a Quarter.
    We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
    If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
       3 combinations not contained in target master planning object structure
    Message no. /SAPAPO/MSDP_REL108
    Diagnosis
    Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
    System Response
    The source data of these characteristic combinations is not written to to the target planning area.
    So, How to copy with my case?
    4.Please Explain more about:
    u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
    4.1.I can creat a custom category group under menu path:
    SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
    u2192 Basic Settings u2192 Maintain Category Groups.
    But where can I create my custome category? Is this menu path:
    SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
    In this path, I can see to folder:
    -u201CSAP categoriesu201D: We could not create new category in this folder
    - and  u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
    oCategory: TT
    oCategory text: TT
    oCategory Description: TT
    oSort String: 99
    oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
    And then, press u201CSaveu201D button. But system always create message:
    u201CEnter values in work area for non-key fields
    Message no. SV174
    Diagnosis
    An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
    System Response
    The values entered cannot be accepted.
    Procedure
    Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
    I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
    4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
    5. By the way, Please clearly explain for me:
    5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
    5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
    Thanks very much for your help!
    Edited by: xuanduyen on Dec 31, 2011 4:38 AM

  • Indexes on a fact table

    Hi All,
    We are trying to build a data warehouse. The data marts would be accessed by cognos reporting layer. In the data marts we have around 9 dimension tables and 1 fact table. For each month we will have around 21-25 million records in the fact table. Out of 9 dimensions there dim1 and dim2 have 21 million and 10 million records respectively. The rest 7 dimensions are very small like less than 10k records.
    In cognos reports they are trying to join the some dimension tables and the fact table to populate some reports. they are taking around 5-6 min.
    I have around 8 B-Tree indexes on this fact table with all possible combination of columns. I believe that these many indexes is not improving the performance. So I decided to create a aggregated table with measures. But in cognos there are some reports which give detailed information from the fact table and that are taking around 8 min.
    please advice as to what type indexes can be created on fact tables.
    I read that we can create bit map indexes based on join conditions but the documentation says that it can include columns only from dimension tables and not fact tables. Should the indexed columns be keys in dimensional tables?
    I have observed that the fact table is around 1.5gb. But each index is around 1.9 -2gb. I was kind of surprised when I saw that figure. Does it imply that index scan and table lookup would take more time than the full table scan? And hence it is not using the indexes.
    Any help is greatly appreciated.
    Thanks
    Hari

    What sort of queries are you running? Do you have an example (with a query plan)?
    Are indexes even useful? Or are you accessing too much data to make indexes worthwhile?
    Are you licensed to use partitioning? If so, are your fact tables partitioned? Are the queries doing partition pruning?
    Are you using parallelism? If so, is parallel query actually being invoked?
    If creating aggregate tables is a potentially useful strategy, you would want to use materialized views with query rewrite.
    Justin

  • Compression error due to Key figure values

    Hi experts,
    When I am compressing the Info cube, the job is getting terminated. I think that the problem comes from a data issue.The field /BIC/ZX_COM_LC (key figure) contains huge values in both F table and E table. For exapmle the entry in F table is  23.592.684.640.809,00 (16 digit) and E table entry is 985.460.854.341.148,62 (17 digit)and while in the process of compressing they should be added and the value becomes 18 digit number which is greater than the capacity of that Key figure(CURR 17 decimal 2). This is why the compression job is terminated.
    Please through some light on this issue.
    1.If I change the key figure type from DEC to FLTP , what are the consequences?
    2.Do we have any oss notes to solve this issue in production?
    3.Is there any work around for this?
    Please provide your inputs to solve this issue.
    Thanks in advance,
    Edited by: SiNU reddy on Aug 19, 2010 3:35 PM

    Seems like you have too much of data still present in F fact table whcih needs to be compressed.
    Is this data is present in one request or with the multiple requests?
    If its with the multiple requests then you can do the compression job multiple times by splitting the number of requests in this case so that the data whcih you are trying to compress is limited in this case.
    So I propose you to compress few requests at one time and proceed further and check whether you have the same issue comes again or not?
    Do get back.. Hope this helps.
    Murali

Maybe you are looking for