Key figures are not appearing in the reports ?

Hi Guys,
After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

Hi,
can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
Ingo

Similar Messages

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Hidden Key figures are not being displayed after unhiding

We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

/101,/560 are Not appearing in the RT cluster while running the live run

HI Experts,
Pls help me to update the problem,While running the live payroll run the wagetypes /101,/560 are Not appearing in the RT cluster .
and all primary wagetypes are missing in the RT log .I have checked the processing class table for each classes but its perfecly placed.Whatever I placed in the IT 8 is not appering in the RT LOG .I have run with Standard and custom schema's also for indian payroll.Any settings has been changed for basic infotype??wht could be the reson.Early respose will be appreciated.
Regards
Chandra

Hi Chandra,
To me, your problem seems like a patch updation problem.
Please contact your basis team.
Technical wagetypes not coming in the RT table
Regards,
Dilek

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

HI,
Have you done this before ? And if so, is photo stream turned on on your iphone and ipad. and as Alfred DeRose pointed out they must both on the same icloud account.
If you're new to this, you might want to do some research. Photo stream is different from camera roll and albums. Many have been on this sight looking for their photos stored in icloud after restore, etc. and they're not there. Also, after thirty days icloud deletes your photos from photo stream.
So if you're not aware, you might want to google your question. We're using the camera connection kit soon and I am learning about it. From all I've read, I'm also not the biggest icloud fan. I use dropbox. We plan to put photos taken on ipad with a camera/iphones into albums on the ipad. We'll keep all on the sd card until (and after) they can be uploaded to a computer.
An example of an article we can learn from -
http://www.macobserver.com/tmo/article/how-to-understand-and-work-with-your-iclo ud-photo-stream
Hope this helps.

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Fcx4 bin clips are not appearing in the viewer after clicking on them.

fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
Thanks in advance
Regards
Ligon Gopinathan

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Why key figures are not displaying

Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.

Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani.

Key figures are not appearing in the reports ?

Similar Messages

Maybe you are looking for