Key function  F1, F2 ,

Hey for All
i want to configure f1 , f2 , Ctrl F1 ,.....
to do new jobs not as default in oracle

hi,
i want to configure f1 , f2 , Ctrl F1 ,.....what do you mean by configure. do you want to override the standare functionality or do you want to validate the data when corresponding keys are pressed.
if you want to validate the data when corresponding function keys are pressed then you can use key-f1 etc triggers to do the task.

Similar Messages

  • Windows 7 Install and Thinkvantage Key Functionality

    Hello,
    I plan to install Windows 7 Home, however, I don't want to loose the Thinkvantage key and related functionality.  If someone could provide an outline to maintain Thinkvntage key functionality with Windows 7 install I would greatly appreciate it.
    Current OS: Windows XP SP3
    Thinkvantage T60/Type 1953-D7U
    Thank you

    I installed Windows 7 Enterprise x64 on a W500 and all keys are working fine. Some of the tools are discontinued for Windows 7. One of them is the productivity center which enable the blue Thinkvantage button. I installed the latest version of the productivity center for Vista and works fine for me even if not supported on Windows 7. I'm sure Lenovo will find another use for the Thinkvantage button under Windows 7 tho. Also the presentation director is discontinued so the Fn-F7 will start the built-in feature of Windows 7 which will basically do the same thing instead of starting the presentation director. If you used the advanced features of the presentation director you might find the Windows 7 features a bit limited, but Fn-F7 work properly.
    To make all the special keys work properly for your computer using Windows 7 you would need the following:
    Lenovo System Interface Driver
    Hotkey Features
    ThinkVantage Productivity Center (The Vista version)
    As i said the productivity center is discontinued for Windows 7 so there will probably be no support from Lenovo in case of problems with the productivity center.
    I'm not sure what you mean about related functionality so not sure about that one. If you could be a bit more specific it would be easier to say if it will work or not. The choices find in productivity center (when you press the Thinkvatange button) is mostly shortcuts to other applications/tools that have to be installed to work and don't know what you are currently using.
    You can find the available drivers and tools for your system here:
    T60, 1953-D7U drivers
    You could check if you find something missing there. Also you can use system update 4 for Windows 7 that will download and install most of the drivers/software for you.

  • How to use key() function in XSL Mapper file?

    I would like to use the XSLT key() function in an XSL stylesheet in the XSL Mapper designer, but I can find no way to include the <xsl:key> element.
    key() should be supported as it is available in the component palette, but I can't find a way to add <xsl:key> in the designer, and if I add it manually the designer tells me it is not supported.
    This is with Jdeveloper JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660 on Linux.
    Any help appreciated, thanks.

    The usual practice is to leave the XSLT as such. A person skilled in XSLT would know to open the XSLT in source mode if the design view is not supported. Almost most of AIA XSLTs are such and one has to only open them in source view.
    You might want to document this into some document/guide which the person might refer before actually making the changes!
    Cheers,
    - AR

  • Programming Key Functions in Web Dynpro Java

    Hi, "Amigous"
    How can I Programming Key Functions in Web Dynpro Java, like F1, F2, F3...??
    Thanks in advance.
    P:D. I don´t have Swine Flu.

    Hi,
    Please see the below link.
    [http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf]
    Regards
    Krishna

  • Key functions are not working in oracle11g forms

    I have migrated a oracle 10g form to oracle 11g form
    1.Key function such as down arrow,up-arrow is not working in oracle11g forms though key-down etc trigger have been written.
    2.Tree node function,i mean when i try to call form from a child node ,it required 4-5 click.
    Can anyone help me for these issue

    Next_form function is not working.i have copied the .res file from 10g.So the issue like this,when i master forms calls(by using open_form in when-window-activate trigger)to a child form and the child form having (when-window-activate trigger)next_form to return the cursor in the master form,it got hang in 11g.This is problem.i have checked by creating the same.Could you help me for the same.this code is running fine in 10g.

  • Key functional differences between SRM 7 and SRM 5

    Dear All,
    I urgently need to put togther a comparison document thst list key functional differences between SRM 7 and SRM 5.
    NB. i donot have access to service marketplace.
    sheena.roberts(AT)yahoo
    Thanks
    Edited by: Sheena Roberts on Jan 18, 2011 11:21 AM

    Hi Sheena,
                        Go to  difference between srm 5.0 and 7.0
    Regards
    Vishal Pd

  • MSI Wind U110 - Reverse/swap the keys functions of the "Fn" key with "Left Ctrl"

    Hi guys,
    is there a bios-fix to reverse/swap the keys functions of the "Fn" key with "Left Ctrl" for the MSI Wind U110. I don't know why this keyboard is still that disfunctional. I think this is a well known issue, people complaining about for a long time. I am really hoping that you can help me.
    Thank you, CyberKlabauter.

    Quote from: Henry on 08-December-09, 10:47:03
    Have you tried using the 'Search' function up there.
    I did. But maybe I'm to stupid to do it right. I found this thread http://forum.msi.com.tw/index.php?topic=121066.0 but there is nothing about the U110. If I'm searching for U110 I get only three topics (one is this one). I guess I shouldn't use any bios hack from a other model.
    May you're willing to help me a little bit more. Thank you.

  • What are Key functions of WEB Client in CRM 5.0

    Hi
    Can anybody help me what are the key functions in WEB Client 5.0,and who will use WEB Client.
    Regards
    Vikram

    Hello Vikram,
    I request you to be more specific in your post.
    Thanks,
    Vinay

  • How call key Function in WEB Dynpro Java?

    Hi,
    Somebody know how to call key Function(F1, F2, ... F12) in WEB Dynpro Java to launch and Event?
    Thanks in advance.

    Hi,
    You can WDHotKey property to define the different keyboard shortcuts to enable the user to trigger events with key combinations.
    When the user presses the key board shortcut defined as the hotkey then onAction event is triggered.
    The keys F2, F3, F4, F5, F6, F7, F8 and F9 are not supported, they call predefined functions provided by the Web Dynpro Framework.
    The complete list of supported shortcuts is here:
    http://help.sap.com/saphelp_nwce711/helpdata/en/48/1f1d65deaf733fe10000000a42189b/frameset.htm
    http://help.sap.com/saphelp_nwce711/helpdata/en/62/832cf3cd35004aa4ea8a2378c8a2be/content.htm
    If your question is answered then mark it so.

  • Changing the FN key function

    Hello.
    I don't remember how, but I accidentally changed my FN key function to "Show Desktop".
    This means that every time I press "FN" it shows my desktop.
    How do I disable this?
    Thank you very much for your help.
    Itai.

    That was it. Sorry for my easy-to-solve question
    Thank you very much!

  • LICENSE KEY FUNCTIONALITY

    Hi,
    I'm stuck. I've written a piece of software in Java and because of the way java's classes can be reversed
    engineered I want to embedd and run the application on-line via my website say as an applet.
    I read that applets can be very restrictive for example the user of my program will not be able to save
    his work or a file on his hard drive. Thus not too sure how to wrap up the application.
    How can I wrap up my java application such in order to acheive the following.
    1) A license key is generated upon a valid purchase send out to the purchaser via his/her email address
    2) Download my application with the necessary tools as say an icon on the users desktop.
    I outsourced the license key functionality and was told by the programmer that there is no way that the license
    key functionality would stop the user copying it onto another machine or passing it onto a friend - Am I missing
    the point here as I paid for an incomplete solution but surley this should be the case. What are the steps required
    to have safe license key functionality working properly.
    Regards

    opjava wrote:
    I'm stuck. I've written a piece of software in Java and because of the way java's classes can be reversed
    engineered I want to embedd and run the application on-line via my website say as an applet.Running it as an applet doesn't change anything. It will be just as accessible to reverse-engineering as if it were run as a normal application.
    I read that applets can be very restrictive for example the user of my program will not be able to save
    his work or a file on his hard drive. Thus not too sure how to wrap up the application.Unless you use a signed applet, yes.
    How can I wrap up my java application such in order to acheive the following.
    1) A license key is generated upon a valid purchase send out to the purchaser via his/her email address
    2) Download my application with the necessary tools as say an icon on the users desktop.
    I outsourced the license key functionality and was told by the programmer that there is no way that the license
    key functionality would stop the user copying it onto another machine or passing it onto a friend - Am I missing
    the point here as I paid for an incomplete solution but surley this should be the case. What are the steps required
    to have safe license key functionality working properly.There is no absolutely secure way. Since the machine needs to be able to execute the code, it must understand it. Anything that can be understood can be reverse-engineered.
    You can make it (slightly) harder by using a good obfuscator, but that only raises the clue barrier and doesn't produce an unbreakable barrier.
    The only secure way is to never let the user have the code at all. That can be achieved by providing your software only as a web service/web application that you host yourself. This way the user can use the application but never have access to the code.

  • Delete Key Functionality

    According to everything I have read, the keyboard shortcut for sending a file or folder to the trash is Cmd-Delete. This does not work on my computer. The delete key functions as expected within applications, but does not seem to do anything in the Finder. I've tried every combination of Cmd, Option, Control, and Shift with the Delete key, but it doesn't work.
    Any ideas?

    Backspace deletes the previous character and the delete button deletes the next character.
    Dib.

  • New wired keyboard, swapped key functionality?

    hi -
    I just replaced my keyboard for my iMac Intel Core Duo 10.6.8, 2GHz with the standard wired one. The aluminum keyboard is v 0.74, Apple made. The orignal died.
    I used a Dell board for a bit, and used Sys Prefs > Keyboard to swap the OPT & CMD keys. Now I have a new wired Apple keyboard, and the system won't recognize it as an Apple board, and the OPT / CMD keys will not return to heir original roles.
    I did these things:
    1) sys prefs: reset default for keyboard command keys
    2) sys prefs: swapped OPT & CMD key functions, didn't respond.
    3) repaired disk permissions
    I don't know what to toss as preferences that will influence the keyboard.
    Any suggestions, please?
    thanks.

    thanks, but it didn't change anything.
    I've also tried restarting after removing the system preference .plist as well as the keyboard layout .plist. Neither of these worked.
    I tried swapping out the keyboard and mouse with a friend's and that did not change anything.
    I've updated all OS software and repaired all permissions using Disk Utility.
    Perhaps something is creating a conflict, but I haven't a clue as to what at this point.

  • How To Script The F11 Web Browser Key Functionality?

    You've seen many Home pages that give you the choice of
    screen res. When you click a res, say full-screen, the new page
    opens up in a secondary popup and fills the screen.
    Yuck. This is not what I'm looking for.
    However, what I want to know is, can a swf be Actionscripted
    - not Javascripted - to carry out the F11 web browser key
    functionality, whereby when the swf loads in the Home page, it sets
    the web browser into kiosk or full-screen mode without using
    Javascript or HTML instructions in the HTML/xHTML head (E 7 Beta
    totally ignores these "arcane" instructions which is a real shame
    and a major pain in the butt).
    If so, please post the Actionscript on this forum for us all
    to enjoy!
    Fingers are crossed with this one.....

    Hello
    Here's another way you may try.
    --SCRIPT
    set rb to "# get bundle id of default browser
    require 'osx/cocoa'
    include OSX
    url = NSURL.URLWithString('http://aaa.bbb.ccc')
    app = NSWorkspace.sharedWorkspace.URLForApplicationToOpenURL(url)
    puts NSBundle.bundleWithPath(app.path).bundleIdentifier
    return do shell script "/usr/bin/ruby -e " & rb's quoted form
    --END OF SCRIPT
    Regards,
    H

  • Make num keys function as arrow keys

    my left arrow key is not working so i'm wondering if there's a way to make my number keys function as arrow keys. i'm using an apple keyboard with numeric keypad on os x 10.6.8 (late 2009 imac)
    thanks

    Laptops map the keyboard differently as they are also
    using the F1-F12 keys to control screen brightness,
    speakers, etc. To access FCP specific uses, you need
    to hold down the FN key in the lower left as a
    modifer.
    Since this a pain in the butt you may want to do
    this:
    Open up System Preferences
    select Keyboard & Mouse
    select the Keyboard item on the bar
    click on "Use the F1-F12 keys for custom actions"
    close.
    This should return your function keys to 'normal'
    operation. Now if you want to brighten or dim your
    screen, hold down the FN key (lower left of the
    keyboard) to modify the F# key.
    good luck.
    x
    Thanks a lot! This resolved the problem!
    I appreciate all the time you people are putting in helping me and others

  • How to add "security key" functionality in the software.

    hi, i want to implement "security key" functionality in the java software so that only one system (clienta0 can use that software. this is to prevent multiple usage of my software. what i have to do? how to generate the keys and implement them. please help. thanks

    Hi,
    not all key figure types are supported in BPS.
    1. All key figure types must have aggregation SUM, SUM.
    2. Supported key figure types:
    - amout
    - quantity
    - number (integer, float, dec)
    - time, only type DEC
    - datum, only type DEC
    All other key figures are filtered out and are not available in BPS.
    Regards,
    Gregor

Maybe you are looking for

  • Where are photo & other types of files located in iOS 8

    Can somebody please tell me where files are stored in iOS 8 ??? Why isn't there a Finder in iOS 8 like there is in OS X ??? I have photos (several hundred) that are stored on my old iPhone 4s, that are not in iCloud, that are more than 30 days old...

  • Installed itunes 10.5 and now can't use function keys on my keyboard

    I just downloaded iTunes 10.5.0.142 and I now can't use the function keys on my keyboards to change track, pause etc. Is anyone else having this problem? Also, why is it now ctrl+shift+m to switch to mini player? Ctrl+m doesn't do anything now

  • Repainting picture on a canvas

    hey, Now I have the canvasses ready on my applet I would like to make it able to change the pictures when a button gets pressed. For a start I kept it really simple, but when I call the method which repaints the canvas it just won't work. This is wha

  • SOA Suite 10.1.3.1 GA dehydration store

    Since I haven't received a response on the oc4j-ra.xml configuration question, I decided to reinstall and specify an existing database to use as the dehydration store, effectively forcing myself off of my 10.1.2.0.2 installation. There is a catch 22

  • How can i make a JTextField not scroll

    i have a JTextField which can show 10 columns, while i setText 20 cols, but i do not want the TextField scroll to show it all, any idea? thx


HashFlare