Key functions are not working in oracle11g forms

I have migrated a oracle 10g form to oracle 11g form
1.Key function such as down arrow,up-arrow is not working in oracle11g forms though key-down etc trigger have been written.
2.Tree node function,i mean when i try to call form from a child node ,it required 4-5 click.
Can anyone help me for these issue

Next_form function is not working.i have copied the .res file from 10g.So the issue like this,when i master forms calls(by using open_form in when-window-activate trigger)to a child form and the child form having (when-window-activate trigger)next_form to return the cursor in the master form,it got hang in 11g.This is problem.i have checked by creating the same.Could you help me for the same.this code is running fine in 10g.

Similar Messages

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

My 6, 7, y, u, h, j, n, m key's are not working on my hp pavilion g6 PLEASE HELP!!!

my 6, 7, y, u, h, j, n, m key's are not working. they used to work but even then i had to hold down one of those unresponsive keys to get the others to work now i can't use them at all!! i have to use the on screen keyboard which is really annoying but is the only way i can use my laptop
i have a hp pavilion g6 4GB i3 core 64 bit windows . i think the warrenty has expired as it is a refurbished laptop

Hello momomhammed:
I think you forgot to type in HP g6 1239as because I could not find HP g6 123sa. This is the only steps they give for your lat top. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458194&tmp_task=solveCategory&cc=uk&dlc=en&lc... I would do the reset direction first then do the update drives for it. To see if that fixes the issue. If it doesn't then yout computer needs repairing. frrw.

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Satellite C660-17L - Some TouchPad functions are not working

My touch pad functions are not working:
- I can't use it to scroll up and down
- I can't use it to zoom.
What should I do to fix it?

Yes the model number is Satellite C660-17L
And no I didn't install the touchpad driver.
I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
I have no idea what this means but I click no and it comes up with all the mouse setting options.
What should I do now?

My copy and paste functions are not working, does anyone know why this might be happening?, my copy and paste functions are not working, does anyone know why this might be happening?

my copy and post functions are not working, does any one know why this may be happening and what I could do to fix it? Thanks!

Have you tried rebooting?

9iAS java functions are not working

Dear All.
Im using oracle 9iAS Release 9.2.0.1.0 and JServer Release 9.2.0.1.0. Im using java functions (eg. Array, pop, push method and trim function) in my JavaScript section.
But these functions are not working. When run the page it work up to that function and stuck. Functions are written properly.
I would be much-appreciated .if you could help me to solve this problem..
Regards,
Nish

Are you sure you uncommented and changed jvm.include.CLASSPATH=1
in the jvm12.conf when you added your classpath there?
The preferred way to do this would be to create a .war and deploy it instead. Then you can put your beans in the WEB-INF/classes directory and the application wont have conflict problems if you decide to create virtual servers later.

Time series functions are not working for fragmented logical table sources?

If i remove that fragmented logical table sources, then its working fine.
if any body know the reason, please let me know.
thanks and regards,
krishna

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Mathscript all matlab functions are not working

Hello,
I am using mathscript node in my labview development. I have used right away "imfill" function to fill the holes in my edge detected image. But the "imfill" function is not working in mathscript.
How could I use this function in mathscript?
Attachments:
Candel.vi ‏96 KB

Did you take this code directly from MATLAB and put it in the MathScript node? (I'm guessing the imfill function is a MATLAB function?)
If so, you're going to be sorely dissapointed. While MATLAB and the MathScript node both use .m files, they are not the same language. The language is very similar, but the syntax differs slightly in some cases. My guess (since I've used MATLAB but never the imfill function) is that the imfill function is part of a toolkit for MATLAB. Unless the MathScript node has a corresponding function (you'd have to search the help to see) you will not be able to use this function in the MathScript node.
If the MathScript node has no corresponding function and you must use this function in LabVIEW, I would reccommend the MATLAB Script Node. This structure actually calls MATLAB through the ActiveX interface. This means that you must have MATLAB installed on the computer you are running your VI on.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

Keys (MJU) are not working after repair

Hello,
I've sent my MBP early 2011 for motherboard replacement, as affected model.
After repair service inform me some keys are not working anymore (MJU), thay asked me 290 euros for repair
What should I do? Anyone else had the same problem?

I never managed to get the keys to work again, but maybe I haven't been holding them long enough.
I have read somewhere that Apple ask for more than 300€ (USD 400) to change the keyboard, so I am considering opening myself my Crapple Crapbook Pro and change it myself.
I am quite ****** actually. A keyboard shouldn't die like this with no reason less than 3 years later. My Powerbook G4 that I used a lot much more than the Macbook is still working fine.

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Depenedant SelectOneChoices are not working in creation form of ADF 11g

Hi,
I have created a ADF creation form using updatable VO.
I have three list boxes, theaterId, AreaId, SalesSegment. if i select theaterId list box it should refresh the list for areaId and salesSegment.
I have created list boxes in VO attribute level and defined the dependencies.
When i run the page dependant lists are not showing data.
If i create the ADF form with same VO, functionality is working fine but it is not working in the Creation form.
Pls help me to resolve this issue.
Thanks inadvance.
Regards,
Satya.

Check this if its helpful: Re: Cascading LOV not refreshing correctly after removing row

Some key commands are not working

I have a 2010 MacBook Pro running OS 10.10.2.
When I use cmd/shift/4, nothing happens. However, these keys work individually. Similarly, in Pages, hitting cmd/shift/> will zoom the content in the window, but cmd/shift/< will not zoom back out. I've check my keyboard settings and all of the keys are mapped correctly and set to default settings. None of them seem stuck down.
Does anyone have any ideas of other things I can check to restore these functions? Thanks!

Yes, I've done this already. It looks just like your image.
I rebooted, hoping that would fix it and it did not. Also, this started before I loaded Yosemite and I was hoping loading it might fix the problem if it was something simple like that.
I checked the apps tab also (I have no apps) but the only one on there was the "show help menu" button and the keys listed for it are not replacing any other commands.

Two Exact Functions Are Not Working (long)

I am making a portfolio website. The way I have structured my code is that I have an action layer that takes care of global actions such as how the user would navigate through the website. For each page of the website, I would have a seperate layer that would load the content of that page onto the screen. The content would be added as a movie clip which is attached to a scroll pane component.
I am having trouble calling one of my functions. What I am trying to do is that when the user navigates to 'My Work' section of my website, they can select from one of the examples of my works. Doing so will pop-up a movie clip which will display photographs and provide an explanation for my work. The problem I am trying to fix is that when the user tries to navigate to another page on my portfolio, the pop-up will not remove itself. I have created a function which is attached to the close button so if the user presses it, they can manually close the pop-up movie clip. I have also tried using this closing function with the main navigation buttons of my website so that when the user tries to go to another secion of the website with the pop-up open, the pop-up will automatically close itself, however, it is not constantly working. My 'works' page is seperated into several catagories (web, graphics...). This auto close function is only working on one of the five catagories and I do not understand why. I have copied everything exactly for one catagory to the second catagory, but Flash keeps on giving me the error that "Error #1009: Cannot access a property or method of a null object reference".
My flash files can be downloaded here. Once downloaded, you would want to open up website14.fla. I know my coding is not exactly organized, and I am sorry as this is my first time I have really used a lot of ActionScript at once. I'll try my best to walk you guys through my coding to my error.
To navigate through my website, you would click on the sink, toilet, or shower handles X amount of times. 1 time would bring you to 'about me', 2 for 'resume', 3 for 'contact', and 4 for 'work'. Once on the work page (press 4 times), click on the 'web' catagory and select one of the thumbnails. A pop-up window will appear. Don't close the pop-up window, and instead navigate to another page by pressing one of the handes a few times. Notice that the pop-up window automatically closes itself. Now navigate back to the 'work' page, click on the 'graphics' catagory and select a thumbnail. Now navigate to another page by pressing the handles a few times. Notice how Flash produces the error 'Error #1009: Cannot access a property or method of a null object reference'. In addition, notice how the pop-up window doesn't dissapear, and the new page is layed overtop.
To navigate in the Flash file to my error, I'll try to guide you there. In the root timeline, scroll over to Frame 1 Layer 'Action' and look at the actions panel. On line 72, I have two If statements checking for frames 30 and 31. These two frames are where my work is displayed. I have also used a try/catch statement to check for errors. Now going to frames 30 and 31 and clicking on the workContent layer and looking into the actions panel, I am bringing my movie clip onto the stage by using the function createScrollPane. The function createScrollPane is located in frame 1 in the Action layer on line 13. This function just takes the movie clip and wraps the scroll pane component around it. Going to frame 31 on the main timeline, select the workContent layer and pull up the actions panel to see the code. you will see that I am loading workGraphics_content movie clip onto the page. Find it in the library (content/content/workGraphics_content) and open it by double clicking on it. There you will see another movie clip (workGraphics_content2) fading from alpha0 to alpha1. Double click on it and look at the action script in frame one layer 'action'. On line 93, I have the function external_workFrame_exit which is called whenever the user navigates from the 'work' page to another page on the website. For some reason, Flash keeps on giving me an error whenever that function is called. Oddly enough if you scroll up to line 78 you will see the function workFrame_exit which is none the less exactly the same as external_workFrame_exit. workFrame_exit is called when the user manually clicks the closing X button on the pop-up window to close it. If you want, you can open up another movie clip (content/content/workWeb_content) and double click on that movie clip to open up workWeb_content2 and take a look at its action. Looking on line 86, I have the external_workFrame_exit function and this one is the exact same one as the external_workFrame_exit function (which works fine) found in workGraphics_content2.
What I am confused about is how I have two exact functions being called in pretty much exact same situations in the exact same way, and one of them fails to work. Is there a solution to my problem? Feel free to ask any questions if any of my explanations were difficult to follow.
Again, the flash files can be downloaded here. Once downloaded, you would want to open up website14.fla.

Sorry about the long post. I just thought that I would include all the details. To sum things up:
You navigate through my website by clicking the sink, toilet, and shower handle X amount of times. By clicking it 4 times you will end up on my 'work' page. My 'work' page has several categories. Select the 'graphics' category, click on one of the thumb nails and a pop-up will appear. Now navigate to another page without closing the pop-up by clicking on the handles. Notice how the pop-up doesn't go away, and the new content is displayed over top? Now if you go back to my 'works' page and click on one of the thumb nails under the 'web' category, then navigate to another page, notice how this pop-up goes away.
I am using the exact same functions to make both the 'graphics' category and the 'web' category to go away, but for some reason the 'graphics' one is not working.
Again, you can download my files from here.

Key functions are not working in oracle11g forms

Similar Messages

Maybe you are looking for