Key instead of text in the variable sclection screen

Hello Experts,
please clarify my doubt.
My user wants to see the key instead of text in variable selection screen (in portal) for material.
Is it possible to do this?
Regards
Prathap.

Hello!
I think in the menu there is a point like infoprovider specific properties (or similar) in rsa1. Here you can decide what value is shown. Try this, but I'm not sure that this also work in portal.
Best regards,
Peter

Similar Messages

Enabling Key and text for the Variable Selection screen

I need to display key and text for a characteristic when selecting the drop down menu in the variable selection screen of a web report. In the Business Explorer tab within the info-object, I changed the General Settings to display Key and text, but when I open the drop down menu for this characteristic, it is still displaying the key only. Is there some other place where this change needs to happen?

Hi,
Did you try to log out and log in again into BEx?
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Show key instead of text in ME51N for PR document type

Hi, did anyone know how to show key instead of text in ME51N for PR document type? How can I remain the setting after shut down the PC?
Thanks.

Can you give more info about your need as it is not clear which text you're referring to.
Regards,
Vivek

Need to skip the variable selection screen when using dropdown

Hello Friends,
I have created a web template having a dropdown, a table and a text element. Basically I am trying to follow the guide "How to Use a Dropdown Box to Set Variable Values". It shows how to select values for a variable using dropdown.
NOTE: The guide can be found here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
What is happening is when I select a value for the variable in the dropdown, the correct url is getting formed but instead of displaying the report using the selected value, the variable selection screen appears. Given below is the url that gets formed:
http://abcdev.wdf.sap-ag.de:8000/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=3&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME_1=TSTPEROD&VAR_VALUE_EXT_1=04.2007
Please assist me to get rid of the variable selection screen. Thanks!
Regards,
Prem.

Hello Ray,
Thanks for your reply. This has partially resovled the issue. I have awarded you points for that. Now I am able to skip the variable screen.
However, the query results are not getting refreshed. I wanted to restirct the values based on the value given in the variable selection (In my case the dropdown box). Somehow I am not able to link the dropdown with the variable or the "SAPBWOpenURL(url);" function is having some issues.
Please assist. Thanks!
Regards,
Prem.

How to run the variable exit without calling the variable selection screen?

Hi all
I have a query with 2 variables 0P_PRQUA (Previous Calendar Quarter (SAP Exit)) and ZCCDAT02.
ZCCDAT02 is a Key Date variable that is derived based on the last day of the quarter that is entered in 0P_PRQUA. The exit code works correctly when calling up the variable screen and ZCCDAT02 is derived properly.
The problem is that 0P_PRQUA is set to "Can be changed in query navigation". So if the user changes the value of the quarter the exit is not triggered and the value of ZCCDAT02 does not change.
Is it possible to trigger the exit or is there another way to do it? Ideas would be appreciated. I am trying to create a Web Template with a Dropbox box for the Quarter.
Query is written in BW 3.X.
Regards
Chami

Hi guys
Just to restate the requirement. I want the user to be able to change the value of the variable, WITHOUT calling the variable selection screen.
I want the user to be able to change the value of the quarter by using a dropdown box from within the web template. Once that is selected I want the value of ZCCDAT02 to be derived from the new value of the quarter.
Regards
Chami

Adding messages to the Variable entry screen in web report

I need to add a message or note to the variable selection screen on a web report. I need this message or note to be displayed somewhere on the same screen with the variable list. I found something similar in BW Expert regarding pop-up messages, but this does not work with web templates. Does anyone know of a way to add a static (or dynamic) message to this initial screen of a web report?

In my clients place, they are ready to do the SAP Mod based on "CL_RSR_WWW_VARIABLE_SCREEN" to have a Alert Message which sort of based on different idea.
Does anyboay have an idea on where to make the change?
Thanx
Arun

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

Caption in the Variable Selection Screen

Hi,
I have my queries in web templates on WAD. I want to attach a description for each report which shows on the top of the selection screen, how can I do it. For example i have a P&L monthly report with the selection screen include a selection for Fiscal Period and GL Account, I want to have the caption :
"P&L Monthly". How can I achieve this
Thanks
Rashmi.

Hi,
I have tried it but it is showing the caption once i enter the variables and get into the web template. I want it to show on the variable selection screen as well. How can i do it
Thanks
Rashmi.

Adding a message to the variable selection screen

Hi there
I have been asked to find a way to add a message to the variable selection screen.
It appears that DIVISION needs to be added to the selection screen, as this makes the query run faster. However, they don't actually want the user to enter a division, as this causes other problems.
So, ideally, I would be able to add a message to the variable selection screen that advises users against entering a value for division.
I don't know how to do this.
I create the web template, and I can therefore add messages or anything you like to the template, but I don't believe I have any control over the variable selection screen.
Does anyone know if this is possible?
We are running a 2004s system if that helps.
Cheers,
Andrew

Hello,
Well i think if you make the variable used for division not ready for input it would not be available for the users to input anything.
you can find the checkbox for this in the properties of the variable in query designer.
Hope this matches your requirement.
Regds,
Shashank

Interaction in the variable selection screen possible?

I have a query with related 3 variables: a Product Division is related to a Hierarchy-name and to a Hierarchy-node. I want the enduser only to fill in 2 variables in the selection screen: Product Division and Hierarchy-node. Is this possible?
If a enduser is entering a Product Division in the variable selection screen, the Hierarchy-name can be derived in CMOD with step2. But now we want an additional second variable selection screen for filling in the Hierarchy-node, which is related to the derived Hierarchy-name in CMOD.
Can somebody help:
Is there a second variable selection screen possible, or is there some interaction within one selection screen possible?

Well, In the exit itself you can try ppopulating the hierarchy node for the second variable too. Think well, it is pretty much possible doing it along with the same code.

Changing the heading in the variable entry screen

Hi,
I have the varible entry in my web template where in the user enter the starting year and ending year .The heading of the Variable entry screen is defaulty Variable entry I wanto change the heading from Variable entry to Years
In 3.5 WAD what ever description is assigned to the webtemplate appears as the heading for variable entry scree but this is not happening in 7.0
Pls let me know how can this be done
Thansk
Sany

Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver

Changing the variable entry screen in web?

Hi
I have copied and amended the standard web template and that's all fine. I now have a requirement to change the design of the variable entry screen. I need to be able to show the name of the query that has raised the variable screen. Is this possible? Can I change a different web template to achieve this?
Many thanks
Trish

Hi,
I need to do the same, were you able to display query name on variable entry screen, please share how you managed to solve this ?
Thanks in advance...

Display Key instead of Text in filter value

In BEx excel query, filter is displayed as text instead of key. I've changed the ojects properties to display as Key, but still displays text in query. Is there a way to change this??

Hi Angie,
There is no way to change it by way of system settings...

Key instead of Text in Results Object in Crystal Reports For Enterprise

Hi All
I recently developed a report in Crystal Reports for Enterprise and at some point afterwards the text description of the hierarchy used in the report was changed. The Key remained the same, however this caused the report to crash. The solution was to click Edit Query Option in the Results Objects and simply come out without changing anything. This refreshed the results object pane and the report ran as normal. I work in an environment where the text of hierarchies is liable to change frequently and without notice and it will be unfeasible for me to constantly refresh the results object every time a change to a hierarchy is made. Therefore is there a way to define in CRE to use the Hierarchy key instead of the text as this is less likely to altered?
Many Thanks in advance
Neil

Excuse me I have my terminologies mixed up, what I mean is the name of the characteristic used in the report. An example would be a characteristic called with the text of "Material" and a key of "0MATERIAL", if I were to change the text description to "MAT" and the key where to remain the same. This would cause crystal report to error because it expecting the Characteristic name to be "Material". Is there a setting or something in CRE to have it default to the key only so if the text of a characteristic or even a key figure for that matter where changed there would be no impact to the Crystal report.
I hope this makes more sense this time round
Thanks
Neil

HTML instead of text for the worksetItems of the SAPUI5 Shell

How to put HTML for the worksetItems?
Now, it is only text (example with the dashboard title):
worksetItems: [new sap.ui.ux3.NavigationItem("WI_home",{key:"wi_home",text:"Dashboard"}),
Do you know how to put HTML instead of text?
I need it to to put an image next to the title with the font :
<span class="icon-statistics"></span>
Vincent

Hi Vincent,
worksetItems accepts only aggrgetion of type sap.ui.ux3.NavigationItem[]
css could be applied for the id of the worksetITem
like
<style>
#WI_home {
background-color: green;
</style>
an example
JS Bin - Collaborative JavaScript Debugging</title> <link rel="icon" href="http://static.jsbin.…
Thanks and Regards, Venkatesh

Key instead of text in the variable sclection screen

Similar Messages

Maybe you are looking for