Keyboard location on display

My keyboard is located @1 inch above the bottom of my screen. For most things this is ok. But on my notes utility, it's in the way. I can't see what I'm typing behind it and cannot move the note up or downtown seeing. Is there a way to move the keyboard or scroll the page up.

Tap and hold down on the little keyboard icon in the lower right corner of the keyboard and select - Dock.
Settings>General>Keyboard>Split Keyboard>Off.

Similar Messages

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Fix "Folder Location" in Display

I have a 2011 iMac that I transfered all my files to from a PC. I had to buy Photoshop Elements 8.0 in order to transfer my catalogue of 10,000 images with all the tags and albums etc into the Organizer for the mac. I understand that once images are imported into Organizer, all file management (moving images or folders that contain images) has to occur through Organizer (unlike Picasa) otherwise the catalogue can't locate the images.
If you move images in the Finder you must then search in Organizer to Relocate the image and Reconnect them with the catalogue. I found this out the hard way. I think that Photoshop ought to correct this to be able to move and have the catalogue find the images regardless how they are moved as file management should be able to occur either way. However, I know that you can do file management of images within Organizer and the Catalogue by chosing Folder Location view in the Display pull down on the upper right corner. However, there is a glitch. After I move images from one file or Folder Location to another in the Display, the Display does not accurately show where the new images are located. I find that some images are shown where I moved them and some in the adjacent folder. Yet, if I check the actual location in Finder they ARE moved to the designated folder. IE the Folder Location view does not reflect where the images actually are after you move them. This is a big problem if you have to do file management through Organizer because Folder location doesn't accurately show where images are.
Finally, I've played with Picasa and while I like the option for viewing ALL images chronologically like Photoshop, I also like the idea of being able to view images by the folder location. Folder Location in Photoshop could do this, but it only displays the lowest folder of image, rather than being able to click on a folder in Folder Location and show all the images in that folder by sub folders.
Any body else have this problem with images not correctly shown where they are in Folder Location under Display or want the option how to view images?
bg

Vlad,
You'll get much faster and better responses in the Photoshop Elements forum. I had trouble even grasping what you're talking about.
Photoshop Elements forum

I have a HP Pavilion which has a touch sound bar above the keyboard. The display is no longer there

HP Pavilion Entertainment PC Windows 7
Wich has a touch sound bar above the keyboard and a display shows on the bottom of the screen when I touch the bar.
This display is not there any longer.
This question was solved.
View Solution.

Hi,
Download and install the HP OSD utility on the link below.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Onscreen keyboard doesn't display all characters in QWERTY mode in iOS7

Since installing iOS7, the onscreen keyboard has been sluggish. Tonight, all of a sudden, the onscreen keyboard doesn't display all characters on the keys in QWERTY mode - only the B, N, comma, and period keys show their characters on their key face. All of the other white keys are blank. When you press one of the blank keys, the character does display on the key face momentarily and does show in the text box that you are typing in. This only seems to occur in QWERTY mode. If you switch to QWERTZ or AZERTY software keyboard layouts, the keys do display their characters on their key face. If you split the keyboard in QWERTY mode the all keys display normally. This occurs in any application.
We've tried:
Turning off and turning off
Resetting by holding the sleep/wake and home button
Settings->General->Reset->Reset All Settings
Nothing has worked so far... Help!

Thanks Carolyn, we are going to try and 'Restore the iPad' tonight. We went to an Apple store this afternoon - they haven't seen this before and suggested the same thing, to try and 'Restore the iPad'.
Here is an image just to be clear about what the issue is - in this example we are in Safari, trying to type a url:

Assigning Global Keyboard Shortcut to Display Home Folder

Hi there,
I've done some hunting to determine if there is a way to assign a global keyboard shortcut to display a finder window displaying one's home folder contents. I don't see how I can do it using "Keyboard Shortcuts" in system preferences. Does anyone know if there is a way to accomplish this?
Thanks!

you can't make a keyboard shortcut like that that will work from any application using keyboard system preferences.
You can do it with a 3rd party app as follows.
paste the following into script editor and save it as a script or an application.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Finder"
make new Finder window
open home
activate
end tell</pre>
then use a 3rd part application launcher to bind a global shortcut to it. Try Quicksilver, Butler, ikeys or Quickeys for that.
Message was edited by: V.K.

How to use one keyboard, mouse and display for two PC's?

hey guys, right now i'm using a mac mini and also another Windows PC tower. whenever i want to switch between them i need to re-plug in my headphones/keyboard/mouse/display and this is getting annoying. i've been using a usb hub for the mouse and keyboard so it's not as difficult to setup. is there anything out there that'll allow me to switch between them more easily?
what are my options?
thank you

If both are on your intranet, try Synergy.
I personally use the Wormhole. You can drag between desktops.

How do I get the keyboard viewer to display Korean characters

I am trying to set up my Mac so that I can type in Korean. I followed the instructions here: http://www.foolsworkshop.com/120b/koreanmac.html.
After adding all the Hangul input methods under the International control panel, I have the flag language menu on the menu bar that lets me switch between typing in English and Korean.
So far so good, but now I'd like to see a layout of where the Hangul characters are on the keyboard, so that I don't have to guess. The above link says that I can see this by selecting Show Keyboard Window from the language menu. If I select this, however, it brings up a picture of a keyboard with Roman characters on the keys. How do I get it to display a picture of a keyboard with Korean characters?

Bleech. That's exactly the kind of unpolished UI sloppiness that Apple makes such a big deal about not having. I think the dorky-but-lovable PC guy from the TV ads gets a pass to chew out the insufferably smug Mac hipster guy in Korean.
Seriously, though, I tried that and it works. Thanks for the tip.

Macbook mid 2007 broken keyboard where close display touch

Hi I have a macbook a1181 and my problem is that my keyboard is broken where the display touch and i know that apple had established this like a factory problem, so is it possible to repair in apple's assistance shop free even if my warrantee is finished or i have to pay for a new one?
thanks

None of us here can give you a definite answer. You need to bring the machine to an Apple store and ask the folks there.
It is true, at least here in the United States, that folks have had their topcases replaced at no charge to the user. I'm not sure if the same will hold true for other countries.
~Lyssa

Non-Apple keyboard and Target display mode?

Hi,
How do I change to Target Display Mode with a Logitech keyboard? The usual Command/Windows + f2wont work!
edit: what would be perfect is an applescript to do this, anybody ever heard of one?

Probably be better to search the logitech boards, here's some reference to the cmd and option keys being switched:
http://forums.logitech.com/t5/Keyboards-and-Keyboard-Mice/wave-pro-on-OSX-comman d-key-switched/m-p/31
Regards,

Brightness Keyboard Shortcut - Dual Displays

Hi guys,
Posted this in another forum and did not get an answer so thought I'd give it a try here. I've got a Mac Pro with dual 23" displays. Anyone know of a way for the keyboard shortcuts (F14/F15) to affect brightness on BOTH displays instead of just the main one?
Thanks in advance!

Nope. Not it. I managed to set it so F1/F2 **AND** Fn+F1/Fn+F2 adjust the screen brightness. I can't for the life of me find where I *defined the keyboard shortcuts* for the screen brightness. I know that I did it, I just wish I'd written down *where*.
The problem I'm having is that the system F1/F2 functions are overriding application-specific shortcuts. NOT the "Function/Fn" stuff.

Storage Location Address Display.

Dear All,
Good Morning to all of u. Hope u all are doing well.
I have issue that i have a plant in delhi location
1010 Delhi Plant & under 1010 there are diffrent storage location
as given
Plant         Storage Location
1010        FG01
1010        TR01
1010        SP01
1010        TE01.
These storage location has diffrent address accoring to their address in diffrent area. for example
FG01 IN KAROL BAGH
TR01 IN KASMIRI GATE.
Now the issue is that i have to see the storage location address in system. so please help me.how i can display & modify in the system.
Regards
Dev
Edited by: Parmar_Devender on Feb 10, 2011 7:26 AM

Hello,
You need to maintain storage location address first;
Go to Transaction OX09 >>Enter your plant>>Now select the storage location and double click on Addresses of storage location in Dialog structure>> Now Press that Tab New Entries from application Tool Bar.
Now Enter 1 and press the Envelope icon and you can maintain your storagge location address. Now this address will come in delivery address of your purchase order.
Like wise you need to maintain storage location addresses for storage locations FG01, TR01,SP01,TE01 in plant 1010
BR,
Tushar
Edited by: Tushar Patankar on Feb 10, 2011 5:47 PM

Keyboard Layers not displaying

I recently upgrade to Mainstage 3 and found that when I open the concert I was previously using with Mainstage 2, any new instrument channel strips will not display keyboard layers in the Edit or Perform window.
The layers are however showing up in the Layer Editor below the Workspace and can be edited. I can hear everything fine and they play as normal but not being able to see them displayed on the Perform screen is kind of annoying.
I should also mention that "display keyboard layers" is checked in the Layout screen up to a height of 3 levels so that is not the issue. Also, when I open a brand new concert template I can see the layers in every window as expected when a instrument new channel strip is added. It seems to be a problem with my old Mainstage 2 concert.
Figured it was a bug and I can't find any mention of it in the forums. Any suggestions would be greatly appreciated.
I am running Mainstage 3.0.3 on a Macbook Pro with Mavericks 10.9.3.
Thanks very much!

Yes! Finally got it figured out today.
When I create a new channel strip I had to change the MIDI Input to the keyboard that was connected. There were 3-4 listed and I just had the wrong one checked apparently.
Never noticed this being an issue in Mainstage 2 but it's all figured out so away we go.
Thanks for everyone who took a look at this question aerolfor replying.
Cheers!

Keyboard shortcut for display is not working

I have an external keyboard because my internal one is damaged, When I set up the keyboard shortcut settings when I first got the keyboard I made sure the display short cuts are set, it worked, though when I changed the short cut values to be something else because it conflicted with a program I am using it stopped working, When I set the shortcut keys back to what I first put them when I got the external keyboard it still did not work.
I use Macbook air 13-inch, Mid 2011, Software OS X 10.9.4
My mac is up to date on this posts time.

Sorry, I don't have an answer, and I am not a Mac user so not familiar with their problems, but ISTR another Mac use posting with the same issue recently. Are you using Mavericks? There are apparently a number of bug issues that the PS team has made Apple aware of.
But in case that is not the issue here, is this with the Background layer? Shift F5 works OK for me on a BG layer, but you might find the Del key works better for you.
Not strictly related, but for other CC users reading this thread, Trevor Morris has released a CC version of his famous Photoshop Keyboard Shortcuts PDF, as well as an Extension that applies a number of custom shortcuts. I didn't think there were any going spare! I am also a big fan of the Michael Ninnis Power Shortcuts video from last year's Adobe Max, and there are bound to be conflicts
Message was edited by: Trevor Dennis (I forgot the Trevor Morris link)

Webi- Location fields display dynamically

Hello
We have a webi report based on OLAP universe. We have a requirement to display the locatoins data depending upon user selection of location and radius.
These are the following fields in the WebI report:
Material No. Packaging Component, Manufacturer, Manufacturer Location, State, Country
389 Carton XXXX Delaware City DE USA
389 Insert YYYY Delaware City DE USA
389 Coil ZZZZ Blythewood SC USA
Business wants 4 selection fields:
Required Radius: 50 miles
Location: Delaware City
State: DE
Country: US
when they enter 50 miles and select location Delaware city, they should get all manufactures within the radius of 50 miles to this City.
Output:
Material No. Packaging Component Manufacturer Manufacturer Location State Country
389 Carton XXXX Delaware City DE USA
389 Insert YYYY Delaware City DE USA
How can I achieve this in WebI?
What are the possible options to achieve this in Business Objects?

I am not aware of any specific product, maybe somebody else knows and will be able to advise but every possible source from the web would be different from any other.
If I was in your shoes I would write myself or hire somebody to write a script to pull the data and store them somewhere for then reporting out of them.
This shouldn't be too difficult, as said it only varies depending on what data you need
Thanks!
Simone

Keyboard location on display

Similar Messages

Maybe you are looking for