Keyboard & Mouse Settings - Mouse Tracking Problem

Whenever I change the tracking setting for my mighty mouse in system preferences it works fine, but as soon as I close system preferences the tracking setting reverts to the default setting. I tried altering various settings and they all remain as I set them when I close system preferences, but the mouse tracking setting is the only one that will not remain as I set it. I tried changing the setting in Terminal, but it will not work that way either. Then I downloaded MouseZoom thinking that maybe it would work, but it also works fine until you close system preferences. Any input would be greatly appreciated.

Have you tried repairing permissions?
If that doesn't work try downloading Onyx
http://www.titanium.free.fr/pgs2/english/onyx.html
Run these scripts in the 'Cleaning' Tab
* User Caches
* System Caches
* Core Files
* Temporary Files
See if that works for ya.
Good Luck
-Steve

Similar Messages

Keyboard and Mouse Settings Keep "resetting"

Ok so I set up my keyboard's F5 to be the Desktop View ( F11 the old way ) and squeezing my mighty mouse, I set to Expose... but every time I do that, it resets itself after like a day or so..
Anyone experience this? I have to go back in and check off the F5 option again, and I have to change my mouse from Button 4, to Expose.
HELP!

I am having the same problem. I have my system preferences setup to synch with my .mac account. The mouse settings keep resetting on both computers I have synched.
The problem seems to have ramped up since the update to 10.5.3. It is now happening every synch.

Wireless Mighty Mouse Tracking Problem

I'm finding that sometimes my mighty mouse is not tracking downwards.
During these blips it will still tracking left / right and upwards.
When this happens, I can feel that the 'wheel' is not engaging the internal mechanism that drives the scrolling / tracking. After sometime of operation the mouse starts tracking again and I can physically 'feel' that the 'wheel' is engaging the internal mechanism.
Does anyone know if this is a common problem, does hte mouse need to be cleaned inside? Do I need a new one??
Luke

Hi
There are many threads on this but here's Apple's advice:
http://docs.info.apple.com/article.html?artnum=302417
Steve

Expose looses keyboard and mouse settings

Hi,
My girlfriend iMac is constantly loosing the Expose settings (keyboard shortcut and mouse). I reinstate it to the default, then after a while, they just disappear after a while for no specific reason.
I tried repairing the permissions, but it did not help.
Any idea?
Thanks

ditto, any help out there?
doesn't seem to have any rhyme or reason, except that it happens after I've been away from the computer for awhile, as it either sleeps or is on the screensaver. It doesn't seem to happen in the middle of actually interacting or using the mouse/keyboard.

Wireless Keyboard & Magic Mouse - Battery Power Reporting Problem

Problem Description: OS X Bluetooth Manager is constantly reporting that my 2009 Apple Wireless Keyboard has a low battery. For instance, Bluetooth Manager reports my Wireless Keyboard Battery Level is 18%. At the same time Bluetooth Manager reports my Mouse Battery Level is 65%. Because the Keyboard Battery Level is low I am being constantly nagged by the Bluetooth Manager about Battery Level and the possibility of the Keyboard disconnecting.
I decided to swap batteries between the keyboard and mouse as part of a test to see if there is a problem with the way the keyboard or mouse reports available battery power. Sure enough it appears there is a problem with battery power level reporting.
The batteries that were in the Wireless Keyboard, and that are now in the Magic Mous,e are now reported as having a Mouse Battery Level of 65%, compared to a Keyboard Battery Level of 18%. The batteries that were in the Magic Mouse, and that are now in the Wireless Keyboard, are now reported as having a Keyboard Battery Level of 18%, compared to a Mouse Battery Level of 65%.
Conclusion, either the Wireless Keyboard, or the Magic Mouse, or both devices are incorrectly reporting the Battery Power Level. It may also be that the OS X Bluetooth Manager is incorrectly reporting the battery level of one or both devices as well.
This needs Apple to investigate & fix the issue through updates to either the Magic Mouse, 2009 Wireless Keyboard or the OS X Bluetooth Stack.
I am using Duracell NiMH 1.2V 2000MAh "Stay Charged" Batteries (same as the Apple Store battery version)
I'm running Snow Leopard 10.6.4 + Apple 2009 Wireless Keyboard Firmware Update 1.0 + Bluetooth 2.0.1. Firmware Update.
So Apple Support Techs... there is the challenge; are you up for investigating and fixing this problem??
Cheers Pete

Thanks for the link David. I used the Community Forums because I've found in the past that Apple Support do monitor them and do pick up problems with Apple gear and pass the info back to their developers. Mostly I used the Community Forums because I just couldn't find the link you provided, so thanks again.
ps Apple & Macintosh are one in the same. My Apple Wireless Keyboard & Apple Magi Mouse are actually performing as per the descriptions in their respective user manuals, especially in terms of how they report battery state through their built in LED lights. So I deduced this as a problem with the Mac-mini Bluetooth Stack, so beleive it is appropriate to this forum.
I'm sure other users have noticed this, or similar problems, so perhaps they will add their experience of this issue to my original post. When I did a search of the Community Forums using the search term "Keyboard OR Mouse AND Battery" I found plenty of similar issues.
Thanks again for the link I'll chase Apple through that channel.

Mighty Mouse Tracking Problems with Mac mini core duo

I have a new Mac mini core duo (2GB RAM, 100GB HDD) and I'm having problems with my USB Might Mouse.
The cursor stutters and doesn't track with the movement of the mouse and it will sometimes leap to a different part of the screen or get stuck at the last place it rested. At other times the mouse will track smoothly for a while before starting to stutter again. The behavior isn't consistent.
Is anybody else having tracking problems?
Any thoughts on what might be causing this behavior?
iMac G5 20 & Mac mini 1.42Ghz, PB G4 1.67Mhz, Mac mini core duo Mac OS X (10.4.6)

Hmm, this could be one of two things. Your mac might be faulty (Harware wise) which would suck. But, hopefully it is a problem with your drivers that need updating. Try these 3 options.
1. Update you mouse driver.
2. Update you video card driver (Video cards can sometimes affect mouse sensitivety -don't ask why)
3. This is my last solution, before consulting a technician (For money if you can do it free talk to one!) or returning your mini: Try reformating/reinstalling Max OSX and if u have bootcamp check out wat happens to the mouse in XP check for the same problem if it doesn't happen in XP your hardware is safe. IF the problem continues after this... looks like your hardware is bad in that case i recomend a return or send back (If your on warranty).
GOod luck,
Wannabe

Problem with wireless keyboard and wireless mouse

All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Wireless Keyboard and Magic Mouse (Bluetooth) Problems

Hi folks,
I recently got a new Mac Mini, wireless keyboard (Apple) and Magic Mouse. During high LAN activity, the keyboard and Magic Mouse will often lose connection and will have trouble re-connecting even when LAN activity goes back to basal levels. If they do not lose connection, the performance becomes terrible and both lag significantly during use.
This behavior does not happen on my MacBook Pro.

Other things to check-
Do you have anything on top of your mini, or is the top of the mini under a desk or other obstruction? The bluetooth antenna is (as you are looking from the top down at the mini) to the top right of the Apple logo on the plastic case top. Try clearing any clutter (if there is any), or establish a clear line of sight with your keyboard and mouse to the unexposed top of the mini and see if the dropouts occur.
Also, microwaves wreck havoc with bluetooth. Any machinery in the same room as your mini and keyboard/mouse?

Magic Mouse tracking problem

OK...it's all pretty and shiny so I bought it. Installed the mouse software update to Snow Leopard and though it appears to be installed just fine, the tracking rate is SLOWWWWWWW, even though I have it set to the highest tracking setting.
With my Wireless Mighty Mouse on a new 24" LED Cinema it takes no more than two inches of mouse travel on the pad to go from one side of the monitor to the other with the pointer. With the Magic Mouse my mouse pad isn't wide enough! Seriously, with the tracking set to maximum for both mice the Magic Mouse moves about 3/4 way across my monitor when traveling the entire nine inches of my mouse pad.
The Mighty Mouse was already bad enough at this (it had to be on the max tracking setting) but this isn't right. Unless someone has a fix this goes back to the store (it's already out of use). Thanks.

Yes...fully understand the concept of acceleration, but it's still not working properly for me. It is definitely better after I changed the tracking limit to "5" in Terminal, but the left-right distance on my 24" monitor is still nearly all the width of my mouse pad, where it is about two inches with the Mighty Mouse.
I use SteerMouse only for it's Snap-To feature (something Apple simply has never done in all these years) but it's a pref pane and I've completely uninstalled it trying to make a difference, but it doesn't. In fact, it also has a tracking increase feature that also helps a little...but just not enough.

Magic Mouse -- almost unusable tracking.

My new magic mouse doesn't track well on almost any surface, including flat wood, mousepads , cardboard, and more. On the best surfaces, it still tracks with a jittery style. Is there something wrong with my bluetooth receiver, or is it the mouse?
I tried getting support by putting in the serial number, but Apple claims it doesn't exist.

Have you used any other bluetoth devices with this Mac in the past, ex. Keyboard, mighty mouse? If so did they cause you any trouble.
Remove any wireless phones or other wireless devices like other computers that use wireless and take them to another room or unplug form AC. Make sure that you do not have any external devices such as drives or printers attached to the Mac and then turn off your Macs Airport.
See if the problem persist!
If the problem still exist then call the Apple store where you purchased it and see about a return.
It is possible that the Bluetooth of the Mac is experiencing issues but the mouse is easier and cheaper to test and change.
Also make sure that you have the latest update for the Magic Mouse installed on you Mac:
http://support.apple.com/downloads/#mice
Then I would download an install "Magic Prefs" and see if it helps with the problem.
http://magicprefs.com/
Message was edited by: iyacyas

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

Unable to change mouse settings in System Preferences

Using a standard wired USB Apple Mouse (oval shape with scrolling nib and squeeze option for the 4th button), the options in System Preferences seem to have no effect. Have tried configuring the secondary button (to emulate right click) and nothing happens. The 4th button used to function as "Mission Control" but now there is no effect. Is it possible the mouse hardware no longer works? It's less than a year old.
Some other information: I recently reinstalled the iMac to make room for BootCamp and Windows 7. Could that process have soured to mouse settings? Right clicking (same mouse) works in Windows 7 so I doubted the hardware problem.
I've followed steps for removing HID plists and stuff from the Library/Preferences area, but no joy. Is there some other troubleshooting I can perform to get this feature working again? It *was* working before the reinstall, but now isn't.
BTW: I'm aware of the "<control>click" to get a right click going, but when you get used to using something and are very productive in that method it is difficult to just "change the way I'm doing it" so please help me to find the cause for this issue instead of teaching me new ways to do things.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How can I prevent my mouse from erratic tracking with time machine on?, How can I rpevent my mouse from errtic tracking with time machine on?

I am running 10.8.5 on my MBP, and external monitor, keyboard and Magic Mouse. When I have Time Machine on the mouse is a pain to use use as it does not track properly. Is there anyway to have Time MAchine come on after 30 minutes of inactivity or something? I have yet to find that prference.
Thanks,
Jim

4 MB
I was doing that and I wanted something on Sept 18 and I shut it off on 8/20 and never turned it back on. So that will work but you have to remember to turn it it. There should almmost be an option somewhere to check that when the system goes to sleep, turn on Time Machine. All my PC back-up stuff has that option. Surprised TM doesn't. If raising the memory will do it it seems to cheap enough. Will that help you think. And I did just reboot my machine yesrday so it is pretty clean:).

Wireless keyboard and mighty mouse do not work with windows Vista

I have a new iMac core 2 duo 20" used by my granddaughter.
The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
Any suggestions would be helpful.

I had the same problem on the mac mini from my dad with windows XP.
I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

Keyboard & Mouse Settings - Mouse Tracking Problem

Similar Messages

Maybe you are looking for