Keyboard no longer working when using Citrix Receiver and OSX10.9.5

I use Citrix Receiver and an iMac to connect to my work desktop from home. I have the latest release of Citrix Receiver. This morning I upgraded to OSX 10.9.5 and, after the update, my keyboard was not recognised when using Citrix Receiver. It works fine otherwise. Yesterday I had no problems. Is there something in the new OSX upgrade which interferes with Citrix Receiver? Does anybody know what I need to do to get it working again?

I had the same problem and found the solution on another discussion board.  You just go to the dock and click on Finder, then click back in the Citrix window and the keyboard works again.  At least for me.
MacBook Pro 2011

Similar Messages

  • HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

    The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
    This seem to happen after the update. Any suggestions?

    Dear Apple friends,
    I have the exact same problem with some apps.
    Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
    Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
    I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
    Should I update to the latest firmware and do what raymond73 said?
    Is there a fix for this issue?
    Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
    Is it possible to downgrade to iOS 6?
    Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
    Should I wait or go to the place I bought it and try to get the money back?

  • Firefox 30 will not launch the ICA Application when using Citrix receiver 4

    When trying to launch a Citrix Application with Firefox version 30 it will not launch.
    There is no error message appears.
    If, you change back to Firefox 29 all works without issues.
    How can you get the new version to work Citrix Applciations and Citrix receiver 4.1

    The fix for me was to update to the latest version of Citrix Receiver (4.1.0.56461) and then change the plugin settings for Citrix in the about:addons sections from "ask to activate" to "always activate". All working again for me now :)

  • Keyboard backlighting not working when using Windows in Boot Camp

    Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

    Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

  • Workspace no longer works when using flex application as Form

    Hi,
    I've got a problem in the Workspace with one of my process that use a flex application as form.
    I used the tutorial "Creating Flex® Applications Enabled for LiveCycle® Workspace ES" to create the flex application and it works well in the workspace (displays ok and datas well passed to the process).
    The task completes well because my process fires the next step with all the datas filled in the task.
    But after the end of the task (when I click on the submit button of the form) the Workspace is no longer usable.
    I can no longer access preferences, messages, starting process panel... when a click on an item in any Menu nothing occurs. Everything is blocked.
    I must restart the Workspace to be able to use it again.
    Can someone help me please?

    I think I have it solved, will check...
    When modifying, the P3 in the go url was left out. what was P2 should be P3 and the correct P2 would have the table.column name.

  • Aperture 1.5.6 no longer works when using Snow Leopard.  Help!

    I never upgraded to Aperture 2. This has prevented me from using RAW files on my Nikon D90 (despite the RAW Compatibility Update, it did not apply to the original Aperture).
    Now, to my dismay, Aperture does not work on Snow Leopard. This is just great, because my entire collection of over 20000 photos is stored in the library. While I am aware that the photos are preserved in the Aperture library, I am aware of absolutely no way to easily access them for export now that I have Snow Leopard installed and I'm fearing for my photography collection.
    I am not willing to downgrade my OS just for Aperture, but after two serious issues with the original Aperture program, I think I am going to switch over to Lightroom. Aperture's workflow was excellent, but the fact that a copy I paid good money for is being phased out in extreme manners like this, so much so that my photo library is in critical condition, makes me leery of future iterations of the program. I understand something like PowerPCs being phased out with the release of Snow Leopard. That makes a lot of sense, because it's old technology. But I feel like Apple simply ignored people who had the original version of Aperture and only supported the newer version.
    I may have to resort to installing Aperture on my friend's laptop that is still running Leopard, exporting all the images, and then importing them into iPhoto in the meantime or something.
    Is there any way I can get around doing this? Is there an easier way to access my files in the Aperture Library without going through the program? Does Lightroom have an easy way to import from Aperture? If I bought Aperture 2 instead of Lightroom, would I be able to import Aperture 1's Photo Library right into Aperture 2 and still preserve everything?
    I'm really worried. Thank you for reading/responding.

    I ran into the same issue as well - I had an old academic version of 1.5 which did not even have an upgrade path to 2.0. What's worse is that there was no way to recover my RAW/master files without rolling back to OSX 10.5. After much frustration and reading Apple's responses in these forums, I decided to try out Adobe Lightroom and I'm liking it a lot now.
    I used a 10.5 install with Aperture 1.5.6 in a temporary partition to get the RAW files out. I probably will not spend any more money on Aperture and will pay the extra $ on lightroom as it seems to be more versatile and worth the money. Especially the new integrated export UI is neat.

  • On my iPad I Cant get the keyboard to show using Citrix Receiver.

    I Cannot get a keyboard to show on my work VPN using Citrix receiver, using my ipad.  I see all my needed apps, but no keyboard so I can't type a thing
    Message was edited by: MarcusKog

    If the iTunes sidebar (along left side of iTunes window) is hidden, go up to the menu bar.  Under View, select Show Sidebar.  With the sidebar visible, does the iPod appear there under DEVICES.
    Actually, if the iPod is formatted for Mac, Windows cannot read it, so I think iTunes should automatically prompt you (when you first connect it) to do a Restore, which will reformat the iPod's hard drive for Windows.
    When you connect it, what do you see on the iPod's screen?
    Is it connected to a USB hub, or directly to a USB port on the computer?
    Is the iPod seen n Device Manager or Computer Management or other Windows utility?

  • 3rd party keyboard no longer works properly with Yosemite

    Prior to the update to Yosemite my third party bluetooth keyboard paired without issue on my wizened 2007 MBP workhorse. I unfortunately spilled some liquid on the keyboard recently. A few keys no longer respond. I will be replacing the keyboard, being cheeper than replacing the entire computer. I brought out my third party bluetooth keyboard, and it initially paired fine under Yosemite. I went into the keyboard preferences to see if I could improve the key mapping with the function keys. Selected "set up bluetooth keyboard" which seemed to reset the connection. Since, the keyboard no longer worked completely. Letters, numbers, and function keys, respond, but none of the letter keys. I re-paired it multiple times to the same effect (forget - pair). The keyboard still pairs fine with my iPhone 6, with the Apple Mouse still pairs fine with the laptop. Is there any way to fix this problem? The keyboard technically is pairing!
    I am using an old apple USB keyboard as plan B until the main keyboard is replaced. However, this is especially frustrating, because one of the reasons why I bought that keyboard was in case the old laptop's keyboard developed issues!

    Do either of these typical troubleshooting steps make any difference?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Command+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Firefox menu) > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    * click the globe or padlock to the left of the address in the address bar > More Information > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

    I use Citrix Receiver to connect to my office systems when I work from home. The office systems are Windows 7 based and I work at home on a Imac. Up to yesterday everything worked like a dream. Then I upgraded from OSX 10.9.4 to 10.9.5 and sine then my keyboard has stooped responding when I am connected to my office system. When I close Citrix the keyboard works OK. I tried to connect using a MacBook still on 10.9.4 and there are no problems with the keyboard in Citrix. What do I do to get the keyboard to work under 10.9.5?

    Citrix Receiver is upgraded to 11.9.0. http://discussions.citrix.com/topic/356870-receiver-for-mac-119-tech-preview-for -os-x-yosemite/
    It works good together with OSX 10.10 Yosemite.
    I think they did a great job releasing an update so soon after the release of Yosemite.
    I upgraded to Yosemite on a mid 2011 iMac. It all performs better that OSX 10.9.5. No issues so far.

  • Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Is there a way to use my HP6100 Printer with Mavericks?

    Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard? 

    It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
    I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
    http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
    Alternatively ou could try Gutenprint (open source software):
    http://gimp-print.sourceforge.net/MacOSX.php
    I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

  • The function of the F keys at the top of my keyboard no longer work as they used to. How do I restore their old function?

    The function of the F keys at the top of my keyboard no longer work as they used to. The actions they do no longer correspond to the symbols that are printed on them. For example, the volume buttons no longer control volume and now change the display to full-screen instead, and the brightness buttons don't do anything at all.
    This started today and I'm finding it very irritating. I checked in System Preferences and didn't find any obvious way to turn most of them back to what they used to do.
    Help?

    In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.

  • The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

    The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

    Hello there, Teworsham90.
    The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
    iTunes: How to add artwork to songs and videos in your library
    http://support.apple.com/kb/HT1409
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

    After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker.  What to do?

    Hi jlk166,
    I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/kb/ts5196
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

    After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

    Dansyacht wrote:
    If the previous Safari suggestion doesn't work try the following:
    In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder.  Restart Safari.  If this works you may just want to delete that FUBAR plug-in.
    Thanks.  This was the solution for me.
    Message was edited by: tvdowntown

Maybe you are looking for