Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Similar Messages

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

IPad 3 not working correctly after update

Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
A few notes:
Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
Calendar is blank (only showing a blank opened book).
Reminders is blank.
I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
Any ideas on how to resolve this issue?

Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
A few notes:
Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
Calendar is blank (only showing a blank opened book).
Reminders is blank.
I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
Any ideas on how to resolve this issue?

Email counter and connection not working correctly after updates

How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine. Does anyone have a fix for this?

I did find the problem with the counter. It had to do with my Gmail account not my other email account. I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though. I have made sure that the passwords is correct that is entered.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

My macbook pro retina is not working camera after updating Mountain lion.

My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Keyboard not working correctly on laptop. What do I do?

so I was using windex to clean my laptop and it went on my keyboard too. I cleaned it off but I noticed that it was not functioning properly. Some letters were not even working. After 24 hrs. almost everything is working but not correctly. Some keys be typing weird things and opening programs. Like w types out 2w and e opens a program. F8 doesn't work either. Please help.

Hello gurmeet1126,
Welcome to the HP Forums!
I understand the keyboard is not working correctly. I'll do my best to help, but first I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Also, try another keyboard. This will help determine whether or not the issue is with one keyboard or several. Thanks!
Mario
I worked on behalf of HP.

Script does not work anymore after updating to FM 12.0.3

Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!

Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

My mouse is not working correctly after upgrade to ITunes 11

I upgraded to iTunes 11 for WinXP and now my mouse is not working correctly. No double clicks, no right button function and sometimes refuses to do simple left click options. What can I do?
I've tried new mouse drivers and checking the settings in Control Panel but no joy so far.
Driving me mad and taking me three times longer to do anything as I look for keyboard solutions.

I'm facing the same problem too on Windows 8. No mouse clicks (just 'ding' sound whenever trying to click anything).
I could work around it on Windows 8, but ultimately have to restart my PC to get back mouse functionality.
I wasn't quite sure which app is to blame, but ultimately concluded it's iTunes 11. As this behaviour always concided with having iTunes running in the background for 15-20 minutes (usually listening to podcasts) and never seems to happen when iTunes 11 isn't running.
Don't know what to make of this, I'm currently playing my podcasts through Windows Media Player instead. I'll hopefully try running iTunes 11 in Windows 7 Compatibiliy mode to see if that helps.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

Keyboard not working correctly after updating to 8.1 64bit pro.

Similar Messages

Maybe you are looking for