Keyboard, Trackpad, Mouse and USB ports - Not Responding

Hello,
Here is my problem. Today when I started my MBP, there was no keyboard, no mouse(USB), no trackpad, no USB ports. I restarted it several times, but nothing changes. If not everything looks fine My desktop is availble, also the backlight on the keyboard works fine, but I can do nothing, my MBP is unusable. Only the power button works fine. I tried to connect an external USB keybord without success, the same with usb drives. I'm running 10.5.6 on MBP, Core Duo 1.83 GHz, 2 GB RAM.
I found many discussions here about the same problem( http://discussions.apple.com/thread.jspa?threadID=1568210&tstart=0 ), I tried a restart without battery etc.... Nothing helps.
Please help, my warranty passed away
Message was edited by: gvassilev

As this is literally a brand new imac, I would hope that the ports aren't giving up as I am sure they are very expensive to replace.
If it is that new you should be under applecare so you could take it your nearest apple store and let them deal with it (or call apple first if you want).
Besides the keyboard do you have anything else connected to the usb ports that may be drawing off too much usb power? In which case you may need a powered usb hub.

Similar Messages

  • I AM USING KEYBOARD WITHOUT MOUSE AND LETTER "H" NOT WORKING

    I AM USING KEYBOARD WITH NO MOUSE AND LETTER "H" NOT WORKING
    DOES SOMEONE KNOWS WHAT CAN BE DONE.
    THANK YOU
    MARIA

    I saw this issue before where cause was a bad preference for another application.
    When I had the "can't type Shift H" problem in Entourage, it was a corrupt preference for FlightCheck, a preflighting program I use in conjuction with QuarkXPress that was the culprit.
    First determine if the problem is in your User’s folder by creating a new User in System Preferences and test for the problem there. If it goes away then you know the problem is in your User’s folder.
    Use new User to test for problems
    Let us know the results

  • Touchsmart TX-2 fingerprint scanner and USB ports not working

    Hi everyone,
    Please forgive me if this is in the wrong spot.
    Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
    I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
    All advice really welcome and very much appreciated!
    Thanks in advance

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • USB port not responding

    The second USB port on my iBook is not responding to my Flashdrive. However, the other USB port is. Any suggestions for fixing or figuring out what the problem is?
    Thanks.

    Help. I too am having problems with my USB ports on a brand new 2.16ghz 15" Macbook Pro with 2GB Memory. More specifically, for my business, I use Vectorworks 12, a macintosh CAD program with a serial dongle that enables me to simply open and run the program. Well, the serial dongle is not lighting up as it should whwn plugging it into my MacBook Pro. My wife has a 15" PowerBook and G4 17" iMac, in which the dongle does NOT light up either! When I plug the dongle into my Dual 2 ghz "G5" Tower it lights up perfectly as it historically did! I plugged in a thumb drive that works in both my laptop and G5 tower. So why all of a sudden does the Vectorworks Serial Dongle become unrecognized by both USB ports in my MacBook Pro when Thumb drives, iPods, USB mouse etc. all work? The serial dongle should have at least lit up in my wifes 15" PowerBook or G4 iMac if the problem was isolated to my MacBook right? Something is messed up from the last firmware update maybe? So, what the heck happened! It was working a few days ago!? I need to use this serial dongle in my MacBook Pro but why is it, of all these computers mentioned, only being recognized on the G5? Please Help!

  • Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

    I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work. 
    I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
    I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
    The drivers that are not working on Windows 7 32 bit are:
    Realteck RTL8188EE 802-11b/gn witeless lan
    Realteck ethnet die and
    Intel High definition graphcs driver 
    Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
    So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
    This question was solved.
    View Solution.

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • Toshiba L505D-ES50​25 Microphone​, Sound , Webcam and Usb ports not working

    Title says all, i also dont have any usb port tree in my device manager

    For the sound go search in your start menu sound and click manage try the same for mic you may haft to configure it if not go to device drives ( sane for ports) you either haft to enable or ad drives if that does not work shut down your computer we'll starting it up press f8 and and select repair computer if it doesn't work you will haft to repeat the sand process except don't click repair click open the partition and follow the instruction when it ask you put it to out of box state

  • HPDV6 6c04sa - HP truevision HD camea and usb ports not working

    My camera is not working - there appear to be no drivers for it through the website for re-installing, and none in HP recovery and the copies of the original drivers loaded on the computer.  Cyerlink you cam does not install a driver.
    How am I expected to be able to re-instal a driver when there is not driver for it?
    Secondly, there is no information on the camera provided in the laptop.
    USB ports on the left hand side are not working.
    Finally - there is a mysterious Q drive which also appears not to function.
    Running Windows 7 64 bit.

    bump
    Is the HP TrueVision HD internal webcam usb based?

  • Esata Port and USB Ports Not working

    My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
    and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
    port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
    device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it. 
    Any advice would be much appreciated.
    The computer is a Dell Inspiron N7010 running Windows 7

    Hi,
    Obviously, you can't connect USB directly into Esata port, for they are not compatible.
    Attempt to install your phone usb driver and then check if it works.
    If not, it should be related to your adater, not all adapters support data transfer.
    Andy Altmann
    TechNet Community Support

  • USB port not responding on iMac

    First - On my iMac (running OS X 10.7.5), I periodically will lose the functionality of 1 of my 3 USB ports on the back of the Mac.
    The only thing that seems to work is to restart the iMac.  But, this is only a work around.  Why would the USB just randomly fail?
    Second - On a related note, I do have a USB expansion hub that ONLY works with an external hard drive.  Whenever I try to use it for my iPhone, iPod, Neat scanner, or whatever, I get the pop-up window stating that there is not enough power for device that was plugged in and that I must use the USB on the back (which may or may not work in the first place).  Any suggestions on a product that WOULD work as a successful USB expansion?  Thank you.

    1. The port overload protection is tripping off because it was overloaded.
    2. Get a self-powered USB Hub instead of using that bus-powered Hub.
    Below are a couple examples of Belkin self-powered Hubs
    Hi-Speed USB 2.0 4-Port Hub | Other Hubs | Hubs | Macbook & PC | Products | Belkin
    Amazon.com: Belkin Hi-Speed USB 2.0 7-Port Hub F5U237-APL-S: Electronics

  • Firewire and USB ports not recognizing devices

    All of a sudden, some of our MacBooks don't recognize firewire and usb devices. It's weird, but after about a week, one of the MacBooks suddenly started recognizing a video camera, again, but it's troubling because my users need to be able to import movies and pictures from digital devices.
    We ran the updates, and it did not help. We have been using these devices with our MacBooks for over a year, and this happened at the worst possible time. Any ideas?
    I've tried both self- and AC-powered devices, rebooted, powered off and on, made sure everything is plugged in, etc.

    Try Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Mouse and track pad not responding

    intermitently the mouse and track pad arent working. I can move the cursor put no left or right function. I have to restart computer to get them working again.

    well, it is not over yet
    the bluetooth keeps disconnecting the magic mouse
    Any advice?

  • Mouse and touch pad not responding/working?

    the entire touch pad doesnt work when using the computer. also when a mouse is plugged in that doesnt work either!...... but both work fine when in the lenovo help section, (when pressing the lenovo help button) they only dont work from the login section and when logged in.
    HELP!!!

    I am facing similar problem. However it is little different. My touch pad stopped working just within 3 months after buying this product. Now the problem is no body is taking responsibility of this kind of problems customers are facing. Here the real problem is my blue light at the touch pad has also stopped working.
    I believe it means, it must have some hardware problem. Now it is almost more than 8 months to this product and am still struggling with this problem. The only good part of it is, here my usb mouse is still working.
    One more thing i would like to know here, how can i find lenovo help key you mentioned in your querry? Please guide someone to get rid of this problem.

  • TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

    Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.    

    Hi SBrwn,
    Thanks for visiting Apple Support Communities.
    The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
    Follow these steps to reset the SMC on your iMac:
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer. [by holding down the power button]
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    You can find these steps and more information at this link:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    All the best,
    Jeremy

  • Aluminum Keyboard USB Ports Not Working

    I bought a new aluminum keyboard for my Intel Core 2 Duo iMac last week. Everything worked fine at first. I was able to connect my digital camera, flash drive, and iPod through the USB 2.0 port, while my mouse was plugged into the other.
    Anywho, now the only thing that I can get to work in either port is my mouse! If I plug anything else in I get the following notice:
    That's impossible being 1) it worked last week and 2) these are USB 2.0 ports.
    I've tried restarting my system and running software update. Any solutions?

    These ports being USB2.0 does not prevent this message at all. There is still a restricted power supply from 1 USB port (tracing back to your computer, all 3 items are being powered by the 1 port on the iMac). There is also the possibility that other USB items attached to the computer are having a very small effect, just enough to make a difference, so try with all others removed.
    I would personally get a small USB extension cable plugged into the iMac, and plug your units into that. If you need more ports, a good powered hub will sort this out, as it can provide the 500ma current from each port, rather than splitting the available 500ma current between a keyboard, a mouse and another item.
    Karn.

  • My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

    My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
    Thanks

    Have you updated iTunes with the absolute latest software?  If you have not in a long time, your iPad won't be recognized.

Maybe you are looking for