Keyfigure dsiplay problem in BEx Report

Hello Experts,
In my BEx report i need to display keyfigure values as a whole numbers instead of fraction.I have selected 0 in decimal place of keyfigure properties but the problem is if I have a decimal it gets truncated instead of round figure. Eg. for value 153.65 report shows 153 but I need to display as 154.
Regards
Kumar

To be more specific suppose u r having a key fig say KF having the value 153.65.
Don't set any decimal place for the KF. Just go to the properties and hide it
Now create a new formula and set the decimal places to 0 in the properties and use the following formula.
( FRAC ( 'KF' ) < 0.5 ) * FLOOR ( 'KF' ) +
( FRAC ( 'KF') >= 0.5 ) * CEIL ('KF')
Hope this helps

Similar Messages

Cumulation problem in BEX REPORT?

hi,
i am generating reporting FISCAL PERIOD WISE. the values of standard price(OPRICE_STD), moving average price(0PRICE_AVG) values are basically coming from R/3 directly.
0fiscper    Company period            std price           mov avg price
2009001     20090101                      40                         50
2009001     20090102                      40                         50
2009001     20090103                      40                         50
2009001     20090104                      40                         50
no, when i run the report by fiscal period the values are showing 160 instead of 40, and 200 instead of 50 respectively.
when u drill down the values are 40,50 only for the company period wise. but how to display overall result as 40 for std price, and 50 for mov avg price in the bex report. that means how to do it in bex query designer.
regards
vadlamudi

thanks one and all , that problem has been resolved.
i have created structure for material types( Ingredients, packaging materials in rows)
when i execute the query by fiscal period the values which are showing is very high in the final result.
when i drill down by material and keyfigure(formula) values are not matching with the final result.
and if we execute by material wise rather than period wise the values are perfect.
pl tell me the solutio
regards
vadlamudi
Edited by: venugopalv on Sep 3, 2009 10:55 AM
Edited by: venugopalv on Sep 3, 2009 11:52 AM

Problem Running BEX report from SAP.

Hi All,
We are getting the below error message when we are executing BEX report from SAP.
"Analyzer requires version 140. The currently installed version is 066
Message no. RSR_LAUNCH_EXCEL107."
when i run the report for first time it is displaying correctly but, when i run it for second time (first one is already opened) then i get the above message.
Please let me know is there any setting or oss note related to this issue.
Thanks,
Shiva.

Hi,
Where is it happened? in Tx RRMXP, RRMX or when you execute Bex Analyzer?
Probe with this notes: 1086904, 1152929.
Regards.
Edited by: Conrado Linquet on May 11, 2009 9:55 PM

Tricky problem in Bex report

Hi, experts,
    In our Bex reports, If I set the figure format(scaling and decimal) with "change query (local view ..)", then customized layout(add drill down, keep filter ..). It's works fine.
    But, If I do customized layout firstly, then go to "change query (local view ..)", the format change can not work any more It's so strange, just cause different sequence.
    Some end user will follow wrong sequence, how can I explain this. is it bug in BW?
Thanks in advance.

my Version is: 3.50   patch level 3020.10.618
For example,
column is Act, Plan
Row is company
free characteristic is profit center.
if you position on "ACT" and right click mouse and select "filter and drilldown according to" -- "Profit center"
then open the "change query (local view)" , you will see Act located on "free characteristic". in this case, I can not set the scaling factor for "ACT"

Problem in Bex report Status of Data based on multiprovider

Hi Bi Expert,
I am facing probelm in my bex reprot having field "Status of data"
Report is based on multiprovider which using 3 cubes.
Out of this three cube report showing data with cube havnig oldest date data load.
How can I get latest one request data into my report .
I am not using bex web template so dont give solution related to it already gone through that thread.
using bw 3.5 version

Hi again,
in the table RSICCONT you find which request is in which data target. When you define the user exit variable on 0REQID, you have to go in this table and read the request with cubes names in your multi provider. In a second step you sort the request after cubes and time tamp and take the first n (depending on how many cubes you have in MP). Keep in mind: when you apply READ statement, read after Cube name
Regards
Aban

Gl account problem in bex reports

hi experts,
In my purchases data GL account is prefixed with chart of account ex: XX00/345672.
But in my report in bex client donot want to see the chart of account prefixed to GL account, so i need to show 345672 only with out prefix XX00/.
Please guid me how to achieve this
Thanks

Hi
There are 2 ways to do this,
1. If report is already there in production and assigned in portal then user have a knowledge of drill downs and properties then he can go to properties of GL Account and display as not compounded.
or
2. If you need to permanent solution then keep char of accounts object in above GL account in Rows better to keep first object as chat of accounts in rows because in future if user wants drill down and across that case also it works fine. You need to made Chat of accounts display properties as 'No DISPLAY'.
Regards
Jagadeesh.M

Keyfigure aggregation problem in BEX

Dear gurus,
I am creating a vendor performance report. In the report I will have SLA derived from formula "Goods Issued / PO Requested Qty"
The output of my report as follow
Vendor | SLA | Goods Issued | PO Qty Requested

Dear gurus,
I am creating a vendor performance report. In the report I will have SLA derived from formula "Goods Issued / PO Requested Qty"
The output of my report as follow (drill down by Vendor Level)
Site....Vendor......SLA.......Goods Issue....PO Qty
101.....90203.......100%......800 CV..........800 CV
101.....90202........80%......160 CV..........200 CV
102.....90201........50%........20 CV............40 CV
102.....90199........33%........30 CV..........100 CV
Result............... ( A )
I would like to know what is the output for result row A ?
I have tried several methods of aggregation, but the output is not relevant.

Aggregation Problem on BEx Report

I have a query that I want to display key figs that will aggregate.
For example:
char -> 0DF_PREQ
char -> 0DF_PREQITM
char -> 0pur_group
char -> pr_rlsdt
char -> zprrlsta
key_fig -> 0netprice
cal_key_fig-> z_mike_test
cal_key_fig -> ckf_mike_test
z_mike_test is defined as:
general calculation: abs(date1 - date2)
aggregation: std
aggregation reference_char: 'none'
calcuate after aggregation - checked
cal_key_fig is defined as:
general calculation: z_mike_test > 40
aggregation: std
aggregation reference_char: 0DF_PREQ
When I run it I get 8 rows. The days are calculating properly, and my counter displays 1 in the ckf_mike_test column for 6 of the 8 records so I'm all happy. 0DF_PREQ is unique for 6 occurrences (i.e. one 0DF_PREQ has 3 0DF_PREQITM)
However, when I take out 0DF_PREQ I get 7 rows and my counter displays 1 in the ckf_mike_test column for 5 rows. What I expected to happen is for one row to have a 2 in it, i.e. there should have been an aggregation still by 0DF_PREQ.
What am I doing wrong?
Mike

Al,
When I remove PReq# I get
Item# PurGrp    Buyr    POP Date   PR Date   Stat Date Price Days Counter
10     XYZ   Doe, John 05/03/2011 10/12/2011 10/12/2011     27.96     51     1
10     XYZ   Doe, John 05/03/2011 10/21/2011 10/26/2011     27.96     37     0
10     XYZ   Doe, John 10/10/2011 10/10/2011 10/26/2011     27.96     37     0
10     XYZ   Doe, John 10/12/2011 10/12/2011 10/12/2011     27.96     51     1
10     XYZ   Doe, John 10/13/2011 10/13/2011 10/13/2011     55.92     50     1
20     XYZ   Doe, John 10/13/2011 10/13/2011 10/13/2011     27.96     50     1
30     XYZ   Doe, John 10/13/2011 10/13/2011 10/13/2011     27.96     50     1
I'm thinking this record:
10     XYZ   Doe, John 10/13/2011 10/13/2011 10/13/2011     55.92     50     1
should be
10     XYZ   Doe, John 10/13/2011 10/13/2011 10/13/2011     55.92     50     2 <-
Mike

Need to add extra field in BEX report

Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabh

hi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

Bex Report Designer is not previewing changes in QA

Hi All,
Please help... i am getting an unusual problem with bex report designer. I have created a bex report using report designer. This was then transported in to QA. In QA i opened my created report using report designer and clicked the print version button to preview the report in PDF format. This all worked correclty, however i noticed a spelling mistake in one of the custom text fields i am using.
So i put the report in a transport in dev, made the changes in dev and previewed in dev. Everything is ok here and i can see the change i made.
After this i transported the report to QA and when i open the report in report designer to preview the data i can see in design mode that the custom text field does HAVE the change i made so it is correct. The problem i am getting is though when i preview to see in PDF format the image i get is of the old preview with the spelling mistake.
SInce i have made more changes and i can see the changes in DEV and in QA in design mode but when i preview it shows me the old image from the 1st preview.
Please can anyone shed any light into this issue.
Kind regards
Forhad

Refreshed the JAVA server resolved issue

Error while opening BEx reports

Hello Gurus,
I got a problem with BEx reports. When I tried to open the BI reports in BEx Analyzer, its giving the following error.
"Characteristic 0TCKAKYFNM does not exist. Check authorizations"
I got this problem only with the Production server. All the rpeorts worked fine in DEV and QA servers.
When checked, there is no infoobject named "0TCKAKYFNM" exists in the system.
Also we have checked with Basis people for any authorization object with the name 0TCKAKYFNM but of no use.
We are using BI7.0
Any suggestions will be of great use.
Rgds
Kumar

Hi Kumar,
Check the 0TCAKYFNM objcet properties - i.e Display the Char and goto Tab - Business Explorer.
If the Authorization relevant filed is checked then by default your object can be used to provide data level authorizations.
If this object is included in your infoprovider then you need to provide the values or '*' in the analysis authorization object.
If you r not using any authhorizations, then plz uncheck the 'authorization relevant' checkbox in the object properties.
Regards,
Geeta

How to use a charctersic as a keyfigure in the BEx report

How to use a charctersic as a keyfigure in the BEx report?

Hi chandra:
Please take a look at the document below.
"How to... Calculate with Attributes"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc?quicklink=index&overridelayout=true
Regards,
Francisco Milán.

Security limitation of Bex reporting

Hi Gurus,
Is there a limitation as to what can be secured in BEx reporting in terms of securing data by individual infoobject eg. selective master data value level? Eg. I want to restrict this user to view the corresponding keyfigure values for all characteristic values except for those he is entitled to view?
Regards
Alfonso S.

Hi Mikko,
My requirement was to limit the Leaf node, not the subnode.
My subnode is branch of a few leaf nodes.
I want to limit visibility of these leaf nodes to only a subset of the available leaf nodes.
A leaf node here is a characteristic value (lowest level). The subnode is just a text node.
I have no problem restricting by subnodes which are not leaf nodes.
Can a guru confirm if BW can meet this requirement.
That means to say, is there a limitation on the part of BW to restrict a hierarchy at the leaf node level? I have no issue with restricting by subnodes.
Regards
alfonso s.

RFC connection Error While run BEx Report

Hi All
I got BI 7.0 and create new user with roles only access: TR: RRMX to see only BEx Reporting... I create basically new customize role and put only one transcation code RRMX and assigned to user...
When goto BEx designer I got that error
rfc error received user has no rfc authorization for function group syst.
I am not sure what kind of authrouzation user need to only view BEx Reporting...
But when I put SAP_ALL in that profile same user, thats works fine, but I don't want to give SAP_ALL to user...
2nd question same look like BEx Analyzer the side bar when I click open nothing happend and it writedown like German language..
Please advised

Hi Alls
I am Angeline again, I resolved that problem and want to shair with you guys....
1.     Tr: PFCG and click on Maintain roles
2.     Role Name: Z_RUN_QUERIES
3.     Click on Authorization Tab Saved Entry
4.     In Edit mode Select the template: S_RS_RREPU and adopt reference (Business Content)
5.     Expand u2018Business Explorer u2013 Componentsu2019
6.     Selected: u201CType of a reporting component Calculated key figure, query restricted
7.     key figure u2013 template structure and click on Edit
8.     Un-Check REP Query
9.     Generate the Profile
10.     Create Transport number
11.     click on user TAB and define user name in it
12.     click User compare and complete compare and saved the entry
13.     TR: SU01 in User click on Roles and define Z_RUN_QUERIES and profile
Thanks

Keyfigure dsiplay problem in BEx Report

Similar Messages

Maybe you are looking for