Keynote '09 with very long presentation

I'm planning a kiosk-type application using keynote and a new mac mini. The presentation will have video, transitions, etc. and will be looped. The video will be large (up to 1GB per clip), but not embedded into the keynote file. I'm wondering if the 1GB mini will be able to handle this ok, or if I'll have to go with 2 or 4G. I know the more the better, but I'm trying to keep costs down. Any opinions?

I had really hoped this problem would be fixed with iWork 09, as some people reported, but today I tried my first QT export from a Keynote presentation with narration, and the problem persists. My audio cuts out after the first minute or so of the QT movie.
Earlier thread with details: http://discussions.apple.com/thread.jspa?threadID=1592261

Similar Messages

  • Files with "alien" names in directories with very long path names

    Hi all,
    first of all - I dont know if this is the right forum for my Question,
    but I could not find any better ;-)
    I have a problem with some files with "alien" names with MIXED characters from different foreign countries
    (e.g. "Φέτα (τυρί) 只有沙盒或您的用户页可以用作測試ורת המבחנים בחינוך פור.txt").
    Sometimes - whenn those files are exists in a directory with a very long path name,
    then the windows api fails to handle these files.
    For example GetFileAttributesW() returns error 2
    and ntQueryDirectoryFile does not return this file in the list (etc. pp.)
    I have this behaviour not with other files in those directories (e.g. "abc.txt")
    and also not when those names are a little bit shorter
    or the directorys name is not too long.
    So I guess, there is a bug either in the API or in the file system...?!
    I know that such a file name is a generic one,
    but I have a situation where I have to handle any file with any name -
    even in directories with very long path names...
    So please no suggestions like "use shorter paths" or "convert it to a short name"....
    thx in advance and Best regards,
    dp.

    No need to call, your MSDN subscription has few free support incidents.
    Chat with the rep to submit an incident.
    Or find their phone number
    here.
    Good luck,
    -- pa

  • Trouble with very long sessionid.

    I'm in a wap project at Ericsson. When I try to use Weblogic 5.1.0 as a servlet engine I get a very long sessionid (157 characters long). Jrun gives me a sessionid of 10 characters.
    Weblogic implements getID() method from HttpSession. Is it possible to write an own class with a similarar method and use that class instead of the bea weblogic class and let Weblogic use that class ?
    Or does it exist any pathces that fix this problem ?
    Peter Landhage, Telelogic Sverige AB
    Amadeus - WTM Competence Center
    Tel: +46-(0)703-401481
    [email protected]

    Although not documented, AdminProps shows the following:
    weblogic.httpd.session.sessionIDLength
    (Length of the unique, random identifier used for
    each session (8 bytes or higher).)
    ... and I have it set to 52 ( by default ... Its not on my properties
    file )
    John
    Peter Landhage wrote:
    >
    I'm in a wap project at Ericsson. When I try to use Weblogic 5.1.0 as a servlet engine I get a very long sessionid (157 characters long). Jrun gives me a sessionid of 10 characters.
    Weblogic implements getID() method from HttpSession. Is it possible to write an own class with a similarar method and use that class instead of the bea weblogic class and let Weblogic use that class ?
    Or does it exist any pathces that fix this problem ?
    Peter Landhage, Telelogic Sverige AB
    Amadeus - WTM Competence Center
    Tel: +46-(0)703-401481
    [email protected]
    Jesus M. Salvo, Jr.
    Senior Consultant
    PowerServe Pty Ltd
    Level 2, 116 Miller Street
    North Sydney 2060
    New South Wales, Australia
    Ph: (61-2) 9492 4800
    Direct (61-2) 9492 4853
    Fax: (61-2) 9492 4899
    http://www.powerserve.com.au
    Email: [email protected]
    This email is from PowerServe Pty Limited (ACN 069 037 056)
    The information contained in this email (including any attached files)
    may be privileged and confidential intended for the use of the
    person/persons named above. If you are not the intended recipient, you
    are advised that any use, distribution or copying of the information is
    strictly prohibited. If you have received this transmission in error,
    please notify PowerServe Pty Limited immediately on (61 3) 9618 1222 or
    reply by email to the sender.
    PowerServe Pty Limited does not represent or warrant that this email or
    any attached files are free from computer viruses or other defects. Any
    attached files are provided, and may only be used, on the basis that the
    user assumes all responsibility for

  • File copy problems with very long DVD/CD names

    I can't copy any file from a very long named DVD to the desktop or any other part of the hd. Is there any way to solve it?
    Thanks in advance.

    Thanks again, Malcolm. I did try the disk image file from the DVD before asking in the forum and yes, it works but I was looking for a faster solution. It seems stupid that apple doesn't fix the bug that remains in leopard.
    I'll try with other user account but it seems to me a bit tiresome. I'm used to use one only account in my personal computer.
    Thank you very much for your help.
    Meanwhile I'm still waiting for an easy solution if any.

  • Problem under Mac OS X with very long commands

    Hi,
    in one app. I have very long commands, this make problems under mac os x (sdk 1.4.2)
    it works under Lin and Win, only under Mac OS X it wont work like it shoud.
    is there a possibility of arise this "max length" ?
    sample:
    http://matrix.phileon.de/java_mac.html
    thx!
    phileon

    It seems as he didn't like the last entry of the classpathhuh, i always thought of MacOS X as a she..

  • Simple Transformation with very long XML element names

    I am trying to write a program to deserialize XML documents using the Simple Transformation technique.  There are many optional elements in the XML document, so I need to have conditional statements statements to avoid trying to process elements that are not in the document.  The XML document, however, has several Element Names that are greater than 30 characters in length.  The Simple Transformation technique seems to require ABAP data dictionary structures that mirror the schema of the XML document.  But one cannot create structure component names that are greater than 30 characters in length.  We don't have any control over the XML schema as the XML documents come from the US government.  The ST fragment below shows the statement that I want to write, but since the ABAP Structure PlasticCardInformationGroup cannot have a component AuthorizationResponseInformation, the ST syntax checker yields an "Illegal Reference ADDITIONALPLASTICCARDINFORMATION" error message.
    Does anyone know a way to avoid this error?
    <tt:d-cond check="exist(TRS_TradingPartner_Agreement.TRS_FinancialTransaction.PlasticCardInformationGroup.AdditionalPlasticCardInformation)">
    <ns2:AdditionalPlasticCardInformation>
    <tt:attribute name="CardNetworkType" value-ref="TRS_TRADINGPARTNER_AGREEMENT.TRS_FINANCIALTRANSACTION.PLASTICCARDINFORMATIONGROUP.ADDITIONALPLASTICCARDINFORMATI.CARDNETWORKTYPE"/>
    <tt:attribute name="DraftLocatorNumber" value-ref="TRS_TRADINGPARTNER_AGREEMENT.TRS_FINANCIALTRANSACTION.PLASTICCARDINFORMATIONGROUP.ADDITIONALPLASTICCARDINFORMATI.DRAFTLOCATORNUMBER"/>
    </ns2:AdditionalPlasticCardInformation>

    could anyone help me?

  • Very long publishing times

    Hi,
    since a week know I'm facing problems with very long publishing times.
    I also get error messages during publishing which tell me that the "target server failed to respond".
    Are there any known issues?
    Any help will be appreciated.
    Best regards
    Felix

    If the disk is getting hit VERY hard during the GC, then it is possible that your system is thrash its page file. What else is running besides the Java process? If the total RAM size (not including page file) is smaller than the working set (which during GC basically includes the entire JVM heap) the system will hopelessly thrash.
    You probably need a smaller heap, fewer other processes running or more RAM.

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

  • HT2506 I use Preview to edit photos, and would like to know if there are any Preview updates in the works. I find there is a problem with Preview crashing, or taking a very long time to "catch up" (spinning beachball of death) while I'm editing.

    I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Crystal report with prompts takes very long time to open in infoview BOXI3.

    Crystal report with prompts takes very long time to open in infoview BOXI3.1?
    Is there any way to increase the performance.

    Ramsudhakar,
    There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
    What we know. BOXI3.1
    What we don't know.
    O/S
    App. Server
    Hardware Spec's
    ETC.
    I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
    Thanks
    Bill

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop. I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop. How do I do this?

    I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
    How do I do this?
    (when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)

    Just to add to what ChrisJ4203 said.  You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing.  However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
    If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before.  You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer). 
    After that you can sync your voice memos to your computer as mentioned earlier.
    If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy.

  • I am a very long term customer how is now very disappointed with Verizon!

    I am writing in to give one final try at gaining a positive response from Verizon.  I called in to talk to Customer Service today with a request and was really disappointed at getting a NO for a response.   I have a family plan with 4 phones of varying contract/upgrade dates.  Mine…6/10/15. Wife’s…5/29/14.  Mom’s…6/20/13.   Son…4/11/16.  Two of the phones are past their date and thus we can upgrade without additional fees.   I will be disconnecting my mom’s phone as she hasn’t used it since 8/6 and won’t be using it as she is moving into a Memory Care facility for Alzhiemers.   Thus my request was whether there was a way to upgrade my phone and my wifes phone to the iPhone 6 without having to pay an added fee for upgrading mine early.   I asked that they take into account that my mom’s is 16 months past her upgrade date, I am 9 months from mine and we are very very long term customers. Verizon has been our cell phone company ever since we bought cell phones a long time ago.  I was told NO.    I then told the service rep that if I have to wait until 6/10/15, I have no real reason to stay with Verizon as saying no to this request just makes no sense when it is being ask by a customer of such long standing.  I was told NO again.  Even though I am clearly not a customer that hops from one cell phone service provider to another...Verizon told me NO.  Even if it costs a bit more to switch to AT & T (which it may or may not...I don't know)…on 6/11/15 my wife and I will be leaving Verizon and my son can have an individual account.

    You sign a contract promising to a 2 yr service commitment in exchange for a substantial discount on a phone. You are 9 months from completing your commitment. There is no reason for Verizon to grant your request. In fact, they may be contractually obligated to NOT do so depending on their terms for selling the iPhone negotiated with Apple.
    In the past, Verizon has been lenient(by a month or 2 but never 9 months) with approving an early upgrade, but NEVER with an iPhone. The reason for this has been hinted at being because of the contract terms Verizon has with Apple. Verizon is not going to jeopardize their ability to have iPhones on their network to satisfy your demand.
    Currently, there is a limited time offer to upgrade early with Verizon if you are eligible to get a discounted upgrade by 11/15/2014. Unfortunately you fall outside of that window.
    Good luck with the new provider, you will be unlikely to ever get an early upgrade at another provider either.

  • Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

    Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

    I have found a workaround in this bug report.
    Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
    #!/bin/sh
    case $1/$2 in
    post/*)
    echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
    esac
    Do not forget to make it executable:
    chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

  • Web pages taking a very long time to load; nothing wrong with my internet connection.

    I've contacted my ISP and they've told me there is nothing wrong on their end and that my modem is running perfectly. I've done a speed test and my upload is 33mbps+ and download is 5.5mbps+.
    The problem is, it takes webpages a very long time to load. Sometimes longer than others, but sometimes it's so long I give up. There doesn't seem to be a difference between when I type in a URL or an IP address directly into the address bar.
    One night last week I completely lost the ability to connect to any webpages, and then when I woke up in the morning I was having these problems with connection speed, and the problem has persisted for several days.

    Hello Billyeee,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro.  I would be concerned about this too.
    I recommend following the steps in the section titled "Symptom: The Wi-Fi network seems slow" in the following article to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

Maybe you are looking for