Keynote 6.5 audio cuts off in the middle of a recording

I am trying to record a Keynote presentation with narrative then convert it to a movie and post it to YouTube. I created and saved the presentation, verified the recording then exported it to Quicktime. From there, I loaded it up to YouTube but discovered that the audio was cut off within the first minute or two. When I went back to the original recording, it appears that the audio was cut off when it was being converted to a movie. Is this a known bug or am I doing something wrong? Any fixes out there? Thank you.

One example of an affected clip:
Source is from a Panasonic HD camera--so transferred to FC from a P2 card
Item properties:
817.5 MB
960x720
DVCPRO HD 720p60, Interger (little Endian), Timecode
Hey--could this be caused by the frame rate of the sequence? I just noticed that the sequence these affected clips are in is 60fps, and my video clips are 23.98fps. So--I copied and pasted my clips into a new 23.98 sequence and the issue has gone away. Huh. Oops... Not enough coffee this morning.
Thanks for trying to help out--sorry to have answered my own question (duh).
Message was edited by: Coyotegyrl

Similar Messages

My IPhone 4's incoming audio cuts off in the middle of a conversation...

Just recently - I updated software and backed up iPhone - have not done restore... but - in the middle of conversations lately, suddenly I am not able to be heard. I can hear the incoming voices... but they can't hear me. Call is still connected... any idea why this is happening?

Also I've tried to reset it and it still keeps doing the same thing

HT201263 MY I 4S CUTS OFF IN THE MIDDLE OF THE DAY FOR NO REASON. IT WON'T TURN ON UNLESS I PLUG THE USB INTO COMPUTER. THEN THE PHONE HAS "SEARCHING " AT THE TOP LEFT SCREEN.BATTERY IS 64% NOW AND SOFWAER IS UP TO DATEN

MY I4S PHONE CUTS OFF IN THE MIDDLE OF DAY FOR NO REASON. IT WILL NOT TURN BACK ON UNTILL I PLUG THE USB INTO THE COMPUTER. THEN IT HAS "SEARCHING " AT THE TOP LEFT PART OF THE SCREEN. BATTERY IS 64% RIGHT NOW. IT DID THE SAME THING YESTERDAY SO I DOWNLOADED THE IOS61.1 AND IT SAYS IPHONE SOFTWARE IS UP TO DATE. ANY IDEAS

Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?

HT201272 According to iTunes, my song was downloaded, but it's cut off in the middle. Help!

According to iTunes, my song is downloaded, but when I play it it's cut off in the middle. I cannot download it again. Help!

Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

I recently purchased 3 CD's, some of the songs are cut off in the middle of the song. Itunes sent me a link several times to redownload the songs, but each time either the same songs or different songs would be cut short each time I redownloaded the CD's

I recently purchased 3 CD's, some of the songs are cut off in the middle of the songs. Several times ITunes sent me a link to redownload the CD's or certain songs and each time either the same songs or different songs on the CD's would be cut short. What could be causing this?

shameless bump

TS1424 A song I purchased cuts off in the middle. I can't re-purchase it. What can I do?

A song I purchased cuts off in the middle. I can't re-purchase it. What can I do to fix this?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

A song I recently downloaded is cutting off in the middle of the song. how do i fix it?

a song i recently downloaded is cutting off in the middle of the song. How do I fix that or what Should i do??

Welcome to the Apple Community.
Delete it and try downloading it again from the "purchased" option in the iTunes store, if the problem persists, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Audio cutting off at the end of audio clips w no change in waveform?

Audio cuts off right at the end of some of my clips... I can still see the waveforms that have the full audio on them, but no audio plays for those last two or three seconds! My audio level is the same throughout the clip, so its not like its fading out or anything. This has been happeneing for a few weeks now, in multiple seperate projects.

Hi David,
Thanks for the response. I did look at the song that got cut off and it's a .m4a file. However, I also have normal audio that comes from an external Zoom recorder in .wav format that is getting cut off in the same way. The strange thing is I've never had a problem with this before a couple weeks ago. I've used this same song before and my external audio is always in .wav format

Audio cuts out in the middle!

I have now burned two disks for my current project. The preview looks and sounds fine, but when I view the burned disk, the audio drops out in the middle. I thought maybe it was a memory issue, but wouldn't I get an error message or something? Maybe I did something wrong in the editing, but then why would the preview be fine? Any suggestions? THANKS!

The problem may be the actual DVD media or player. Read Beverly's comments here:
http://discussions.info.apple.com/webx?128@@.68b68f78
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Tape delay gets cut off in the middle of a project

I'm working on a multichannel 24bit, 48kHz audio project in Soundtrack Pro version 1.1.
I'm using WAVs as source material.
One of the audiotracks contains a short sample of 1 second, that has a Tape Delay effect on it with the feedback on 55%, so it keeps repeating for about a minute. At least, that's what is should do.
The problem is that it gets cut off after around 15 seconds.
This does not happen when I solo the track or some of the tracks.
I've converted the 24bit, 48kHZ source WAVs to 24bit & 16bit AIFFs, but this doesn't make a difference.
I found a work around, by solo exporting & importing the track with the delay on it, but this is not how it should be.
Has anyone had similar problems and maybe found a solution?
Thanks.
G5 Dual 1.8Ghz Mac OS X (10.4.9)

For everybody who has the same problem: I found a solution.
Soundtrack appears to end an effect abruptly after around 15 seconds when there are no new clips on the timeline in that track.
The solution is adding 'silent clips' in those tracks every 10 or 15 seconds for as long as the effect has to continue. Not very elegant, but it works.

Horrible exs24 problems..notes cut off in the middle of a sample

Hi, I have a really serious problem with mainstage and exs24. When I play long samples (strings mostly but also various sequences), sometimes the sample plays for a little while, and then all of a sudden the note gets cut off.
Its not a voices problem ´cause it often happens when i only play 1 sample.
I have seen other people around the net with this problem, but i have not seen any proper solution to the problem. If i play the sample again right after the mishap, it will play fine. Can this be hard-disk related? Or is it something with the exs24 that is playing tricks on me..?
cpu and memory looks fine, like 50%
Was wondering if maybe the disk was in some sleep mode, but then it wouldn´t play the first part of the sample, would it? Was also thinking of maybe turn off virtual memory in the exs in order to load the samples into ram, but you cant do that in mainstage i´m afraid.
I have been embarrased on stage because of this and i don´t like it.
I am desperatly looking for a solid solution to this problem.
My setup : MBP 2.4 ghz 4 gig RAM. RME fireface 400.
Harddisk: wd MyBook studio edition II
Thanks in beforehand
Claes

Hi Claes,
I also have this problem and I tried A LOT, I talked a lot and I read a lot and I talked a lot and I read a lot and the problem drove me crazy... After "hundred" of hours working on that I think: if you have that problem you cannot solve it with the exs. It has nothing to do with anything you know is important, that a computer has to have that he can play audio files. I'm shure you NEVER had problems with iTunes playing audio files... But the exs has.
If you just want to play samples I think inside MS there are three solutions: AUAudioFilePlayer, iTunes and GarageBand. I tried them all, you can controll iTunes and GB with AppleScripts and this are possible solutions but they are not very flexible at all.
What I found today and I tested it just for a few hours and by now it works and I tried some of my 1 or two minutes samples and they never cutted of suddenly and it's free and I just cannot believe it that my problem seems to be suddenly solved:
http://www.uvisoundsource.com/uvi-workstation-loops-phrases/articleinfo.php/articlesid/11?osCsid=5929d8fdfa69d4a42a3edb5aeb424da9
it's a free loop player... and it's working... there's a video...
Good luck!
:-)Raino

Hp touchsmart win8 audio cuts out in the middle of listening or watching stuff after 5min

Just bought a brand new HP Touchsmart Envy 23 and audio will stop working after listening to anything after a few minutes. Been doing it since I bought it. Will work again if the computer is restarted, but still will only last a few minutes before cutting out for good again.

To confirm, the driver linked to earlier in this thread was installed and your audio is no longer working at all?
What is the product number?
NOTE: Do NOT provide the serial number or the Windows product key.
If you open the device manager (typically Start>right-click Computer>manage>device manager), is the sound card listed without any errors (?, ! )? If it has a ? or a ! on it, open it and let me know what the status message is.
What is the status of the mute key? Does the key respond when it is pressed?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

[Q] loaded jpg is cut off in the middle!!!!

Hi, I am having troulbe loading an external jpg image
jpg file is long rectangular shape (width 700px * height
8000px <possiblely longer>), and around 1.2mb.
I am loading image with listener (onComplete?: I was using
someone else's tutorial, sorry for my lact of knowledge)
Everything worked..tutorial was great..and result was fine
HOWEVER, when I am loading my own image(which i specified
above), It seems like only 1/3 of jpg file is loaded.
(I wantted to make a scrollable image gallery sort of
thing..showing long portrait images)
I was wondering is there any external file size limit in
flash???
or height(pixel size) limit?? or any other possibly related
issue that i am not aware of???
Can someone help me out ?
Is there any way I can fix it without touching jpg images?
(last way would be cutting the all jpg images into smaller
pieces or making images size smaller :'()
THANK YOU FOR YOUR TIIME ~~

yes, there's a limit of 2880 pixels in height and width for
an image.
to remedy, import your jpg to flash and publish the swf. you
should be able to load the swf and get around the 2880 limit.
there are other work-arounds, but that one is the
easiest.

Audio cuts out in the middle of recording an instrument track

The recording continues to happen, but I can no longer hear either the pre recorded tracks, nor the track I am laying down.
I am using Logic 7 Express on a Mac Mini with 1 Gig of Ram, and I am recording through a M-Audio Fast Track USB. Play back goes through the Fast Track into a Logitech basic computer 3 piece speaker system. I dont know if this is an application or hardware issue.
Any thoughts?

To confirm, the driver linked to earlier in this thread was installed and your audio is no longer working at all?
What is the product number?
NOTE: Do NOT provide the serial number or the Windows product key.
If you open the device manager (typically Start>right-click Computer>manage>device manager), is the sound card listed without any errors (?, ! )? If it has a ? or a ! on it, open it and let me know what the status message is.
What is the status of the mute key? Does the key respond when it is pressed?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Timing goes out and audio cuts off at end of published slide sequence

Hi
I am experiencing a problem with timing and the sound cutting off at the end of a slide sequence.
Here is my work flow:
I record what I want my slide show to say, add my music and sound effects in Soundbooth. I then create a mp3 file for my slide show.
I adjust my slide show timing to match my voice over, ensuring that the total number of minutes and seconds the slide show equates to matches the length of my audio. I then import my audio into my project while maintaining the slide timing.
If I preview the individual slides to match the timing of the arrival of words or pointers in my presentation by pressing the play button in Captivate, everything is great.... until I publish to a .swf file.
On a 2m:50sec slide show of 22 slides it cuts off approximately 5 seconds before the end. My timing which I have bent my brain on getting right, is out and appears to worsen the longer the slide show is or if it is not on the latest and greatest Mac powered computer.
I have gone so far as to increase the length of time on the last slide 5 seconds beyond the length of time that the audio occupies as well as adding another 5 seccond blank slide and still have the same cut off problem. No ideas how to help the poor souls who might not have an amazing computer to watch the demonstration on?
Interestingly if I publish and look only at the last 3 slides or if I look at a short sequence of slides or at a slide in isolation, my audio is there as it should be along with the timing. It would appear that the time "lost" or a lag between the presentation and the audio is the culprit.
Kindly advise if there is a solution to this or whether the problem lies with something I am doing.
Thank you in advance

Has there been any new developments on this problem?
I've been having to do some crazy work arounds to avoid audio cutting off at the end of slides when using CP5 for development.
Then this week I had to review an old training which was published a long time ago only to discover that the same issue of audio cutting off is happening there.
These materials were developed using CP4 and some even with CP3. This means that the problem/change is not CP5 but probably something to do with the Flash player version because at the time of publshing the older files did not have this issue.
This has me really worried. There is no way I can go back and update all the old files and it means that previously perfect materials are now being viewed with audio cutting off.
Have the Adobe Captivate developers considered the possiblity that this may be a flash player issue? Have you discussed this with the Adobe Flash developers? Will there be a fix for this anytime soon?
Thanks,
Aimee

Keynote 6.5 audio cuts off in the middle of a recording

Similar Messages

Maybe you are looking for