Keynote doesn't export in Quicktime

Hello!
I have a problem with a Keynote file: I must show this presentation on PC and so, I want to export it in Quicktime (because there are many animations and hyperlinks).
But, if I export it, I get the error message, that the Keynote file cannot be exported in Quicktime, because the volume hasn't enough disk space or there is a problem with the file.
I have enough disk space (more than 75 GB) and all my files, which I imported to Keynote, are okay.
Can anyone help me? Because I can't find any solutions at the Apple homepage or other websites.
Thanks!
Message was edited by: LadySue

I've also had this problem in the past, but based on the suggestion of another member of this forum I tried exporting my presentations using the Custom settings menu and then selecting MPEG-4, 30 Frames per second, and Best quality. The presentations have exported perfectly.
Good luck.

Similar Messages

Movie in Keynote doesn't export properly for QuickTime

Hello all. I really hope someone can help with this. I've used the discussions before with great success so THANK YOU all for sharing your expertise.
I've got a keynote presentation that for the most part exports perfectly on QuickTime. The only part that doesn't export right are the 2 videos I've got on the presentation. I set the timing with the inspectors for it to start automatically and even added a song to play along with the presentation. But when I export it, there is about an extra minute and 15 seconds added to the whole video and I've got the presentation timed perfectly with keynote and the song. I've got iWork '09 and QT 10.0. Not pro just player.
I've played with the custom settings to no avail. Any way to get the videos to export exactly to their lengths?
Cheers

I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

Keynote '08 cannot export as Quicktime movie

I purchased KN '08 to create presentations. It is updated to version 4.0.2. I have tried for the last 3 hours to export my presentation as a Quicktime movie. No matter what functions I turn off, or change, nothing seems to work. In fact, after the 3rd attempt, Keynote erased some photos out of my presentation. When I tried to re-add them, Keynote said it couldn't because I didn't have access to the file, or there was damage to the files. Luckily I had back-ups I could access.
Is there a way to make this work? Why would Apple put out a product like this that doesn't work?
Robby

ditto. I have not been able export any of my presentations. Also, I could not get the recording to work consistently and correctly. I can't even get my PowerMac G5 with 5 GB RAM to play the slide show correctly.
I found that the only work around is using Snapz Pro X while stepping through the the slide show. This creates a high quality QT movie.
Keynote is not the only problem. Quick Time does not work properly either. Some movies, even high def movies, play flawlessly and some I take at only 640 x 480 gives me a "strobing" (flashing of white). This has happened in movies added to Keynote, movies streamed through Safari, and even some movies played in Quick Time Pro itself.
I thought I had a lemon MacBook Pro, since I'm now on my third logic board/video card since I purchased last July, but I think it is also a software issue. I was hoping that Leopard would magically repair the problems with Quick Time, but it has not.
Any suggestions in how to fix this would be appreciated. Why does some QT play without a problem and others so nasty? What is the ideal settings for a QT export? What is ideal resolution for movies included in Keynote to play without "strobing"?

Keynote 08 - problem exporting to Quicktime (no sound or video clip)

Hi
Having just spent a long time making and narrating a training slideshow intended for a screencast using Keynote 08 (4.0.3) I choose to export the show as a quicktime movie with the recording timings and recording narrative soundtrack. A screenshot of my settings is below.
The problems I have are:
1. The recorded narration is not present in the QT Mov file
2. A video animation of an embedded movie (screen capture) displays the first frame but does not play automatically
The show works fine if I play it in Keynote, but this is no good as I want to put it on the web!
Uploaded with plasq's Skitch!
If anyone has any ideas or similar experiences, please let me know
Thanks
Nick

Just thought I would add my voice to the chorus... I am having the same problem.
Also note that this error will prevent you from being able to "Send To">"YouTube" as well.
I am seeing the exact same issues reported here by everyone else. Not sure what update screwed this up, but it was working fine less than a month ago (I do a series of 5 keynote presentations each month and it worked for the first one I did on June 7 but has not worked for the last two I tried).
I am also in need of a fast solution for this. I am pretty much dead in the water till I get a solution going.
My flash export also results in out of sync audio. Do I have to dig up powerpoint?
Also, it looks as if Quicktime is having a hard time with the file. Quicktime suddenly becomes very sluggish (IE: tons of delay when you click on menus or on pause when the keynote export is playing). Quicktime is NOT having these problems with video files from other sources.
R
Message was edited by: Robert Whitelaw

Keynote won't export to quicktime get a green screen.

Been using Macs for a long time but am new to Keynote '09. When trying to export a slideshow in Quicktime to use in iMovie, I get window with a progress bar and a green screen and a Quicktime file that plays back a green screen!
I have searched the forums and web and cannot find much about this. Any help would be greatly appreciated. The slideshow has just 9 slides with photos and animated transitions, no audio, no video. I want to use the file as my title sequence in an iMovie. I did try to export directly to iTunes and had no luck there.

Have you tried creating a simple three slide movie with just text and exporting that to see if ANYTHING will work?

Keynote doesn't export music when exproting into a video

when I do a video, the sound doesn't come through and endings end up going much longer then they are, making the video very patheticc and slow.
What am I doing wrong and how can I fix this?
If you need an example video, let me know and I will upload it.

I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

Importing Photoshop or Illustrator to Keynote '09 and export to Qucktime

Hello,
I have a slideshow project I am working on for a client 1280x720 for export to Quicktime H.264. I have placed a logo from photoshop for the intro with text created in Keynote. When exported to Quicktime H.264 1280x720 the playback is great but the logo looks all choppy not sharp it does look sharp when played back by Keynote the video looks great it's jut the logo i am having difficulties with. I have imported the file from photoshop and illustrator and converted the file to JPEG and Tiff but still looks choppy when exported to Quicktime. Any help would be appreciated.

The IPTC metadata is for image files only. Video files can't have that metadata written to the file. Application can assign metadata to video files but they are kept in databases associated with the application and point to the video file.
Some DAM (digital asset management) applications can add keywords, etc. to video files but the data stays with the application.

Will Not Export To Quicktime Error -1

Keynote has worked exporting to Quicktime perfectly in the past, but now says i don't have enough memory to export to Quicktime with an error or -1.
Just had plain text with me doing voiceover for about 20 minutes.
Have done it before with no problems.
I tried going to Library and removing the preferences for Keynote thinking maybe something got corrupted, but no dice.
Any help would be appreciated!

Was able to export after rebooting.

Build/Transition times off when exported to Quicktime

I have four Keynote presentations I have built, each of which has several Quicktime movies placed on multiple slides (not the same movie multiple times). I then have Keynote text and shape objects "interacting" with the movies as they play. In Keynote, I have set my build and transition times to perfectly match the content of the Quicktime movies.
Example: I have a movie that was captured from my screen wherein I select various menu items. In Keynote, as the various menu items are selected in the movie, I have Keynote text and arrows pointing to the relevant areas of the movies. "Click File...", "...then Save As..." etc. Looks great when presented in Keynote.
When exported to Quicktime (full size, high quality, Sorensen Video 3) the timing gets worse as the movie progresses, to the point that at the end some of my timings are off by almost 10 seconds or more!
Any ideas why this happens? The export to Quicktime is happing on a dual-processor 2.7GHz G5 with 4GB RAM... should be more than adequate!
Robert

Cheers for that, Kyn. Funny, I spent about two hours reading through page-by-page all the forum topics to see what issues people were coming acorss BEFORE I posted. Don't know how I missed this one though! Guess I should try searching next time.
Thanks,
Robert

Keynote 6.0 Video not playing (export to Quicktime)

I have a presentation with a few embeded videos. No matter what I do, they videos will not play when exporting the presentation to Quicktime. The same presentation in Keynote '09, export to Quicktime works without issue. Has anyone had similar issues?

Here's what I found ... I had to install Quicktime 7 and use iwork 09' (using them in mavericks) ... Using those two and opening projects in those two, works the way it should be.
There's an issue with the NEW Quicktime ... Even if you open and older .mov, it still won't let you control your keynote prsentation.
If you want to control your keynote presentation ( like the way it was), then search Quicktime 7 and use iwork 09'.
Here's what I don't understand ... Being able to convert any keynote presentation to a .mov is a major deal for videos. When they release the new stuff, doesn't anybody actually look at it first? ... Ya' know, to see if it actually works before releasing it? I get that a few things can slip by, but c'mon, major funtions ???
ALSO ........ When exporting the new keynote ( version 6). You can't export to a .mov ... It says quicktime, but it saves to a mv4.
I can see adding value, but stop taking away value !!!!!!!!!

Keynote 06 - Exporting to Quicktime

Okay, so I know how to export keeping the audio intact.
My main problem is keeping all the timings I've created intact as I don't have ANYTHING happening "on click" in my presentation. It is all timed and I'm finding the delay between slides is too long (when one "ends" and the other "begins").
Thus my question:
Using Keynote 06 ... how do I export into Quicktime KEEPING all my timings intact ?

This version doesn't have the recording function --- http://grab.by/3QBb
Thus I cannot do that work around ... anyone got any assistance on offer ?
Should I just give up and save it as a presentation not try to export to Quicktime (make into a movie)

One Keynote slide + one 7.4 MB mp3 exported to QuickTime = 110.2 MB MOV ???

OK... Title says most. Combining a single Keynote slide with a 7.4 MB MP3 and exporting to QuickTime is giving me a HUGE file of 110.2 MB.
Same slide, same MP3, exported to Flash yields an 8.2 MB SWF.
What's up with that??
I just want one slide to open up in full-screen, and click to play one song with the slide... and a file small enough to email.
Any suggestions?

Ok, the magic key seems to be a Custom frame rate of 0.01. With a frame rate that low, I'm getting file sizes of just larger than the music file. Set Keyframe and Data Rate to Automatic.
The reason why this doesn't happen with Flash is because flash does things the way iPhoto does. Display one static image and leave it there until it needs to change. Keynote COULD do that with QuickTime, but it doesn't
Also, if that H.264 gamma change is causing you problems, I just found you can use PNG. Make the same change to the frame rate (you don't have to alter anything else for PNG) and you get a file just a skosh bigger, but closer to your original colors.

Keynote with embedded .mov exported to Quicktime and then WMV (Flip4Mac)

Hi,
I have a Keynote with an embedded .mov file (video and audio) half way through which exports to Quicktime fine ("Keynote .mov").
When I use Flip4Mac to convert the Keynote .mov to WMV the resulting WMV file works fine but stops when the audio of the Keynote .mov stops i.e. Flip4Mac doesn't render the last of the Keynote .mov
I have sought help over at Flip4Mac tech support forum but thought someone here might know the answer.
I have tried a variety of different .mov files in my Keynote but the same in all cases: export to QT is fine but Flip4Mac stops converting the Keynote .mov at the end of any audio.
I can extract the audio track and Flip4Mac will convert the Keynote .mov (video) all the way through.
Help?

what format are the movies you placed on your slides? This makes a big difference in if they get included in the exported QT movie.

Keynote 3.0.2 Will Not Export to Quicktime

I have a put together a Keynote presentation that uses a Quicktime movie on one of the slides. The presentation plays fine within Keynote, but when I try to export the presentation to Quicktime, the export stops and tells me there's not enough memory or there's something wrong with the file. The message comes up when the export procedure reaches the slide that contains the Quicktime movie. Is it possible to export a Keynote presentation to a Quicktime Movie if the presentation has a movie in it? That's like a movie inside a movie. I can't get it to export to QTime.

The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

Keynote 09 exporting to QuickTime playback issue

Hello,
I am looking for some amazing expertise and really appreciate any help and guidance.
I've exported a presentation from Keynote 09 to Quicktime and have an issue. When I try to play the presentation in QT X, I click to advance from slide 1 to 2 and it works perfect, but then when I click to advance to slide 3 it returns me to the start of slide 1 every time. Meanwhile when I use the spacebar/quickview without opening QT the entire presentation plays perfectly.
When I look at the QT file on a PC (using a thumb drive or a CD) QT 7 the file plays correctly in my testing. I have heard from others who these CDs were provided to that some may have had a similar issue, but I can not verify.
Please let me know any additional information I can supply. Can anyone help me understand this issue better and possibly help me correct it? Is this a known issue, or a simple user error?
Many thanks,
Michael

Thanks Dani and Glad...
As an update on my side:
I called in to Apple to try and find out if I jump up to Final Cut Studio (with a bit of a learning curve), if I would be able to replicate exactly the (slideshow) video I made easily in Keynote, hopefully avoiding this issue with the assumption that it is specifically related to Keynote.
Prior to getting on the line with a Final Cut expert, I did fully explain why I was calling with the hope of getting a solution for this issue as I would like to keep Keynote in my arsenal, especially since I am semi-fluent in it.
The person helping was very nice and asked to put me on hold for 3-5 minutes, which I am perfectly happy to wait for complete and accurate information. The solution I was presented with was as follows:
1) Go to export to QT as usual.
2) Click the second drop down (Formats) and select 'Custom...'.
3) A new window will pop up, click the 'Settings...' button.
My 'Compression Type' drop down was set to 'H.264'....I was told to
4) Change the 'Compression Type' to 'MPEG-4 Video.
(I do not think it is related to the fix being suggested or just as a preference, I was told to slide the Compressor - Quality slider on the bottom left to 'Best')
5) Click the 'OK' button on the bottom left
That window will close.
6) Click the 'Next' button and continue with your export.
I did this and the QT file worked, unlike the original I had done. I can not confirm it isn't a hit or miss like Glad saw...but I did ask if this was a "just try this and let's see" (like Microsoft, altctldel...try restarting your machine) or if this is a known issue....it wasn't totally clear, but I was told (not exact words, but basically) there may be something funky about Keynote or QT with H.264. I don't know codecs so have no idea, but I continued....
In case I still don't feel comfortable with this "fix" (which I am not sure I do...I also made a new, but less complex video and switched back to H.264 - this one worked...) I asked to still be connected to a FC expert, just to ask my questions anyway as it would be good knowledge to have, even if just for future self development.
I again did my best to explain what was going on, and the Final Cut person did not understand how changing to H.264 would make any difference...to mention, it is possible I had a hard time getting on the same page as this person who was trying to help me so he may not have understood exactly what I was asking exactly - but he did understand my bottom line - I need to make this video that works when exported to Quicktime!
Not sure if related (would be curious if this is relevant to others here), again not being familiar with codecs, etc - I had dropped a few QT movies I was given from someone else not being sure what they used to create it. I thought a Quicktime movie is a QT move - universal standard....apparently so for playing but not for re-exporting.
I was advised to get a QT 7 Pro key so in the future I can open QT movies I am sent in QT and re-export it as a QT movie from my machine (OS, codec, etc, etc, etc) before dropping it into a project I am working on.
Being on OS 10.6 I have QT X, which does not have this functionality (as mentioned - no Pro version) and when I tried to get a QT 7 Pro key in the past I was misinformed that I wouldn't be able to install it on my machine since it is running a newer version and wouldn't let me install an outdated/older version. Apparently, this is not totally accurate - it is missing from my Utility folder, but I need to do a custom install of it (only way to do it - can't just DL it) from the 10.6 OS disk.
Please, let me know if any of this worked for you or if I can add more details I left out.
Best of luck (...for us all)!!!!
Michael

Keynote doesn't export in Quicktime

Similar Messages

Maybe you are looking for