Keynote export and issues with iMovie import

I told my PC workers I could do a movie for my job in 1 day. They said no way. And I could easily have done that BUT my MAC is FUBAR on file import from keynote to imovie...
I have Keynote 08, imovie 08 and QT 7.6.4 and did a simple slide show in Keynote. I tried to export to mp4, H264, and jpeg into imovie and strangely enough....it occasionally works. Many times I cannot select the files to import because they are grayed out. I have tried many things and again it sometimes lets me import. However, after import I get the clips in the event, and they seem fine. But when I drag them into the project they do not play..they just show a frame or they default to the last clip of video and then skip (in the proper time) to the next video. It is like they are there but the video cannot be resolved. The keynote is just text with build in and out effects and simple transitions.
If I go to Jpeg 2000 or DV (notDVCPAL) they imported OK but were very jagged and severe loss of font quality.
I do not expect this in MAC products. I cannot understand why keynote has a menu setup to export to everything but iMovie....
HELP!

To be clear, the imported video seems to run in the event area. I drag it into the project and it LOOKS like it is OK. And if I drag the cursor over the play area it all appears OK. However, if I hit "play" by itself, as the movie plays it goes fine until it hits the imported keynote section, and here you see the very first frame..and that frame only or nothing....until the next raw video clip (which plays fine).

Similar Messages

Issue with Contract Import

Hello Folks,
I am facing an issue with Contract Import. The contract import file has been struck in Contract Document importer and from past 4 days the status is showing as Running. Even in trace file, it is showing as "Mon Mar 16 18:05:51 CET 2015 Error during action"
Is there any way where the import can be stopped or deleted?
Any help is highly appreciated!!!
Thanks in Advance!
Regards,
Vignesh

Thanks John and Peter for your support. Unfortunately I cannot provide a screenshot of the issue since of the confidential material and has to re-do the work. I have re-done all the excel correction and re-created the Indesign merge document on a PC laptop. So far 'no' problems. I have a strong suspicion that the cause has been a macro used in excel to convert text or another one that I used to add values to the colum that InDesign found issue. Definetly InDesign should have reported a problem before merging the data. Yes, I am using CS5.5 with the latest update and Excel 2010 on a Mac. Still, I would like to find out what means the letter 'A' in the Data Merge Panel, since this may have directed me to find why the multiple 'AAA...' shown in the first line in the merge panel. Again thanks John and Peter: much appreciated.

ITunes song list is blank in iPhoto (when trying to add a song to s slideshow). No issues with iMovie. Any idea? Cheers

iTunes song list is blank in iPhoto (when trying to add a song to s slideshow). No issues with iMovie. Any idea? Cheers

Even though no one replied, i fixed my problem.
Don't know if it will work for anyone else with similar problem
but all I did was a CHKDSK then a defragment of my laptop and now everything seems to be working fine.

Audio Syncing Issue with iMovie 10.0.1

As was the case with iMovie 9, there is an issue with the audio syncing properly to the video when uploaded to YouTube. I am wondering if anyone knows of the workaround for the same issue with iMovie 10 (Mavericks)?
Thanks!

The bar codes are generated from an online service and are downloaded as vector art in the form of EPS files.I am opening the file in Illustrator after downloading the EPS file. I am not scaling it in any way, it just opens in Illustrator "wrong". "Placing" the file creates the same distorted effect. The EPS file looks fine if I view it in Preview or open it in Photoshop, but I need to use it as vector art.

Stalling issues with iMovie 08 when publishing/exporting. Very frustrating.

Hello-
I am having a really hard time with publishing/exporting from iMovie 08'. It hangs or stalls right when it gets to the end of exporting a project. I have the newest update (7.1.2) and it was just freshly installed from the startup discs that came with my macbook pro. The weird thing was that i think before i updated the OS to 10.5.3 i was able to publish projects as I have one that is exported.
Has anyone else had this problem? I searched the forums and people have issues with it stalling at other places but I didn't come across stalling problems at the same time.
What can I do to fix this?
Any help on this issue would be much appreciated.
Thanks.

Hey guys I am really hoping someone can help me with this issue as I am trying to put a DVD together for a group I traveled with and I feel like I have tried everything.
Has anyone at least the same problem? I just feel frustrated because I spent numerous hours creating 6 projects to put on a DVD and the **** thing won't export to iDVD, Final Cut Express, or anything. I just don't want to lose my work and start from scratch in FCE.
I paid for this **** product and it should work!
Are there any programs that will somehow import an iMovie project that hasn't been exported?
I can't export on any format (avi, quicktime, mpeg4, etc.) and am getting desperate, haha.
Thank you for any help.

Issues with iMovie in viewing

I am getting weird playback issues with movies I've added to a project. My movie is like 40 minutes long. When I try to watch the finished product or put finishing touches on it, after hitting space bar the video skimmer moves, but the video preview stays still. I found the video in the library and same thing.
On a reboot or restart the program it works again normally then acts funky after a few minutes.
I didn't change my library, it just isn't previewing and I'm frustrated thinking the video is bad or something.
Has anyone had this buggy issue on previewing a movie in the screen or while skimming in your library or project that the video displays funny.
Brian

Ouch. I'm having the same problem. It is VERY annoying. Was hoping for a solution on here.
I find it is worse when I import 1080p from my camera. When I use 1080p, I can't even adjust the speed of large cuts (60 seconds) because iMovie will just freeze up on playback. Restarting iMovie will revert the clip back to normal speed but the same bug occurs when I try to adjust speed. I find I can break a long clip up into short sections (which makes no sense as iMovie optimizes the entire clip) and adjust speed on 5 second segments without and issue.
The playback is the most annoying. I don't know if it is worth exporting a movie, which takes time in HD, if it doesn't work on preview.
ANY fix for this?

Issues with imovie scrren loading

I am trying to load Imovie to play some of the projects I have created and be able to create new projects. I open the program and the file does not load, the bar on top loads and says that Imovie is active however, the imovie picture adding area does not pop-up and does seem to load at all. any ideas?

Ouch. I'm having the same problem. It is VERY annoying. Was hoping for a solution on here.
I find it is worse when I import 1080p from my camera. When I use 1080p, I can't even adjust the speed of large cuts (60 seconds) because iMovie will just freeze up on playback. Restarting iMovie will revert the clip back to normal speed but the same bug occurs when I try to adjust speed. I find I can break a long clip up into short sections (which makes no sense as iMovie optimizes the entire clip) and adjust speed on 5 second segments without and issue.
The playback is the most annoying. I don't know if it is worth exporting a movie, which takes time in HD, if it doesn't work on preview.
ANY fix for this?

Keynote export to Quicktime with automaic slide settings doesnt work.

I made a Keynote presentation with automatic settings.
All the animation and slides are going automatically from the beginning to the end, I dont have to click.
But when I want to export it to Quicktme movie, it looses all the automatic settings and doesnt fit the background music .
Would be good to export the movie with the original settings, because it fits/syncronized to the music only with this settings.
How can I keep all the slide/animation settings during the export to QT movie?
Thanks

Thank you!
But I think its not an issue, and I found the solution!
You have to make a Slideshow Record first, with your automated settings/transitions, from the begining to the end: Menu-Play-Slideshow Record
After when you are ready, go to Export-QT Movie, and CHOOSE the SLIDESHOW RECORD, NOT the Self Playing option with the preset timings in the export dialogue box.
With this you can create a QT movie with your automatic settings/sliding/transitions.
For me its working.
=)
Hope I help to anybody!

TIFF export date issue with 40D images

Hi.
I have a strange issue with Aperture 1.5.6, Leopard 10.5 and Canon 40D RAW images.
The problem is this:
1) Import a 40D RAW image in aperture.
2) The exif image date is 13.11.07 20:21:10.
3) Then edit the image in Adobe Photoshop CS3 (TIFF).
4) Now we have two version of the image: the original RAW file and a TIFF file.
5) Export the two images with aperture to JPEG files.
Now the exif date/time of the image exported (RAW) is 13.11.07 20:21:10 and that's correct.
The problem is that the time of the second image (TIFF) has exactly two more hour ( 13.11.07 22:21:10 ).
In aperture the date/time is correct for both the images.
Someone can please try to replicate this issue?

Thanks for your reply.
1. I select the photos from iPhoto - varied between 5 and 20 (ran different test)
2. Click on FILE
3. Select EXPORT
4. Under the FILE EXPORT tab I have tried all the various options with no success
5. KIND - I make sure they are JPEG files - I have tried the Original also which is actually JPEG files
6. JPEG QUALITY - I have tried all 4 options from LOW to MAX
7. SIZE - I tried all 4 size options from SMALL to FULL
8. FILE NAME - I use filename
9. Select EXPORT tab
10. I export to the thumbdrive and I chcek and they are on the thumbdrive
11. I also tried to EXPORT to the desktop and copy them to the thumbdrive
I click on the photos on the exported images I placed on the thumb drive and they come up fine on PREVIEW on my MAC. No prroblem with the images until I try to use them on the plasma. I go back and use images from iPhoto 06 that I did not call up with the "08" program and they work fine.
Hope that explains what I do. Thanks again

Issues with iMovie 9.0.9 in Yosemite

Using iMovie 9.0.9 in Yosemite and I am using a late 2009 MacBook.
Yosemite works fine till i started to use iMovie 9.0.9
After Launch, then I went to my projects and then it started it spinning and it would not stop. Then I went to look if I had to force quit it and I did. It said "iMovie not responding" It does it all the time.
I did not change a thing on this computer except for going to Yosemite 10.10.
Is there any workaround so that doesn't do this or do we have to wait till Apple fixes it if they ever do?
Also, When I put in my SD card in my SD reader iMovie would not launch it. So I had to go ahead and create a quick time movie and then imported in that way.
That was the only workaround I founded be able to use iMovie again to capture video in iMovie 9.0.9.
HELP!!!!!!

Im having the same issue with Yosemite, I have old projects from iMovie 9.0.9 that won't open in 10.0.6 and when I try to load a copy of 9.0.9 from my external to my new iMac it won't even copy over. Have a ton of projects i would hate to lose because of this stupid bug.

Wine taking hell lot of time to do anyting and issue with amibroker

I installed wine and winetools. Initially, there were some problems with openGl, etc., which resolved after I enabled "glx" and "dri" in xorg.conf. Now, wine was supposed to work but it did not, it seemed to hang. Then i came across this http://bbs.archlinux.org/viewtopic.php?id=24345
This suggested me to wait and i did the same. After half an hour winecfg finally started. Then I ran "wine some-set-up-file.exe" and it too 10 minutes to see the installer. I installed a program called amibroker and on starting the program (it too 5 minutes to start), there was an issue with MFC42.dll which I downloaded and saved in ~/.wine/drive_c/windows/system32.
Then on starting the program again, i got this error:
[shantanu@bluehead ~]$ wine ~/.wine/drive_c/Program\ Files/AmiBroker/Broker.exe
Warning: could not find DOS drive for current working directory '/home/shantanu', starting in the Windows directory.
wine: Call from 0x6782aa18 to unimplemented function MFC42.DLL.6571, aborting
wine: Unimplemented function MFC42.DLL.6571 called at address 0x6782aa18 (thread 0009), starting debugger...
Unhandled exception: unimplemented function MFC42.DLL.6571 called in 32-bit code (0x7efa2f58).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7efa2f58 ESP:0033fc98 EBP:0033fcfc EFLAGS:00200206( - 00 - -IP1)
EAX:000019ab EBX:7efe46cc ECX:00000000 EDX:678a0660
ESI:0033fca4 EDI:6789e0d0
Stack dump:
0x0033fc98: 7efe46cc 0033fcbc 7efa408b 80000100
0x0033fca8: 00000001 00000000 6782aa18 00000002
0x0033fcb8: 67882b68 000019ab 0033fce0 6781adfd
0x0033fcc8: 678a0660 00000000 0000003d 00000020
0x0033fcd8: 0000005a 00000000 00000078 6781afe5
0x0033fce8: 00000000 00000000 00000000 7ecd459c
Backtrace:
=>1 0x7efa2f58 stub_entry_point+0x58() in ntdll (0x0033fcfc)
2 0x6782aa18 in amixtp (+0x2aa18) (0x0033fd4c)
3 0x6786614e in amixtp (+0x6614e) (0x0033fd78)
4 0x7efa1fc5 call_dll_entry_point+0x15() in ntdll (0x0033fd98)
5 0x7efa3bed MODULE_InitDLL+0x8d() in ntdll (0x0033fe28)
6 0x7efa440d process_attach+0x12d() in ntdll (0x0033fe68)
7 0x7efa4352 process_attach+0x72() in ntdll (0x0033fea8)
8 0x7efa6450 LdrInitializeThunk+0x2d0() in ntdll (0x0033ff08)
9 0x7ee87e65 start_process+0xb5() in kernel32 (0x0033ffe8)
10 0xb7e9f6f7 wine_switch_to_stack+0x17() in libwine.so.1 (0x00000000)
0x7efa2f58 stub_entry_point+0x58 in ntdll: subl $4,%esp
Modules:
Module Address Debug info Name (91 modules)
PE 400000- 545000 Deferred broker
PE 10000000-10006000 Deferred brokey
PE 10100000-10142000 Deferred cooltool
PE 10200000-10236000 Deferred misctool
ELF 41191000-41194000 Deferred libxau.so.6
ELF 41196000-4119b000 Deferred libxdmcp.so.6
ELF 4129f000-412ad000 Deferred libxext.so.6
ELF 412af000-412c7000 Deferred libice.so.6
ELF 41480000-41486000 Deferred libxrandr.so.2
ELF 414d9000-414f8000 Deferred libexpat.so.1
ELF 414fa000-41525000 Deferred libfontconfig.so.1
ELF 41527000-4152f000 Deferred libxrender.so.1
ELF 415b0000-415b5000 Deferred libxfixes.so.3
ELF 415b7000-415ba000 Deferred libxinerama.so.1
ELF 415bc000-415c5000 Deferred libxcursor.so.1
ELF 416da000-416df000 Deferred libxxf86vm.so.1
ELF 416fb000-4175d000 Deferred libgl.so.1
ELF 4175f000-41768000 Deferred libdrm.so.2
ELF 4185b000-4186b000 Deferred libtasn1.so.3
ELF 426f7000-426fb000 Deferred libgpg-error.so.0
ELF 42959000-429ab000 Deferred libgcrypt.so.11
ELF 4585c000-4588b000 Deferred libcups.so.2
PE 5f400000-5f4ed000 Deferred mfc42
PE 67800000-678cd000 Export amixtp
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7df96000-7dfaa000 Deferred msimg32<elf>
\-PE 7dfa0000-7dfaa000 \ msimg32
ELF 7dfaa000-7dfbf000 Deferred midimap<elf>
\-PE 7dfb0000-7dfbf000 \ midimap
ELF 7dfbf000-7dfe5000 Deferred msacm32<elf>
\-PE 7dfd0000-7dfe5000 \ msacm32
ELF 7dfe5000-7dffd000 Deferred msacm32<elf>
\-PE 7dff0000-7dffd000 \ msacm32
ELF 7dffd000-7e039000 Deferred wineoss<elf>
\-PE 7e000000-7e039000 \ wineoss
ELF 7e039000-7e03f000 Deferred libnss_dns.so.2
ELF 7e03f000-7e055000 Deferred libnsl.so.1
ELF 7e055000-7e083000 Deferred libcrypt.so.1
ELF 7e0f6000-7e163000 Deferred libgnutls.so.13
ELF 7e1c3000-7e1f5000 Deferred uxtheme<elf>
\-PE 7e1d0000-7e1f5000 \ uxtheme
ELF 7e28b000-7e378000 Deferred libx11.so.6
ELF 7e3a3000-7e3ab000 Deferred libsm.so.6
ELF 7e3ab000-7e43a000 Deferred winex11<elf>
\-PE 7e3c0000-7e43a000 \ winex11
ELF 7e494000-7e4a6000 Deferred libz.so.1
ELF 7e4a6000-7e521000 Deferred libfreetype.so.6
ELF 7e521000-7e5af000 Deferred winmm<elf>
\-PE 7e530000-7e5af000 \ winmm
ELF 7e5af000-7e5c3000 Deferred lz32<elf>
\-PE 7e5c0000-7e5c3000 \ lz32
ELF 7e5c3000-7e5dc000 Deferred version<elf>
\-PE 7e5d0000-7e5dc000 \ version
ELF 7e5dc000-7e5ee000 Deferred libresolv.so.2
ELF 7e5ee000-7e60c000 Deferred iphlpapi<elf>
\-PE 7e600000-7e60c000 \ iphlpapi
ELF 7e60c000-7e661000 Deferred rpcrt4<elf>
\-PE 7e620000-7e661000 \ rpcrt4
ELF 7e661000-7e6fd000 Deferred ole32<elf>
\-PE 7e670000-7e6fd000 \ ole32
ELF 7e6fd000-7e796000 Deferred oleaut32<elf>
\-PE 7e710000-7e796000 \ oleaut32
ELF 7e796000-7e7c8000 Deferred winspool<elf>
\-PE 7e7a0000-7e7c8000 \ winspool
ELF 7e7c8000-7e885000 Deferred comctl32<elf>
\-PE 7e7d0000-7e885000 \ comctl32
ELF 7e885000-7e8dd000 Deferred shlwapi<elf>
\-PE 7e890000-7e8dd000 \ shlwapi
ELF 7e8dd000-7e9d7000 Deferred shell32<elf>
\-PE 7e8f0000-7e9d7000 \ shell32
ELF 7e9d7000-7ea77000 Deferred comdlg32<elf>
\-PE 7e9e0000-7ea77000 \ comdlg32
ELF 7ea77000-7ebb1000 Deferred user32<elf>
\-PE 7ea90000-7ebb1000 \ user32
ELF 7ebb1000-7ebf7000 Deferred advapi32<elf>
\-PE 7ebc0000-7ebf7000 \ advapi32
ELF 7ebf7000-7ec8c000 Deferred gdi32<elf>
\-PE 7ec10000-7ec8c000 \ gdi32
ELF 7ec8c000-7ecf0000 Deferred msvcrt<elf>
\-PE 7eca0000-7ecf0000 \ msvcrt
ELF 7ee18000-7ef3b000 Export kernel32<elf>
\-PE 7ee30000-7ef3b000 \ kernel32
ELF 7ef3b000-7ef45000 Deferred libnss_files.so.2
ELF 7ef45000-7ef6a000 Deferred libm.so.6
ELF 7ef6a000-7f000000 Export ntdll<elf>
\-PE 7ef80000-7f000000 \ ntdll
ELF b7d41000-b7d45000 Deferred libdl.so.2
ELF b7d45000-b7e70000 Deferred libc.so.6
ELF b7e70000-b7e87000 Deferred libpthread.so.0
ELF b7e98000-b7fa9000 Export libwine.so.1
ELF b7faa000-b7fc6000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
0000000a
0000000c 0
0000000b 0
00000008 (D) C:\Program Files\AmiBroker\Broker.exe
00000009 0 <==
[shantanu@bluehead ~]$
I have no idea abt this. Any solution guys.
Last edited by ravisghosh (2007-05-27 21:22:23)

Instead of writing the whole path of the exe file wth wine, I went into the Amibroker folder in a console by doing cd and then ran
wine Broker.exe
Then Amibroker worked fine. I dont know why. but its working.
however, it gives this error in console
Warning: could not find DOS drive for current working directory '/home/shantanu', starting in the Windows directory.
err:module:import_dll Library qpdll.dll (which is needed by L"C:\\Program Files\\AmiBroker\\Plugins\\QP2.dll") not found
err:module:import_dll Library FastTrack.dll (which is needed by L"C:\\Program Files\\AmiBroker\\Plugins\\FT.dll") not found
[shantanu@bluehead ~]$
On searching my windows directory, I could not find anything like qpdll.dll or FastTrack.dll. On searching web also, I could not find anything like qpdll.dll, but FastTrack.dll seems to be a malware!!!

Bulk API issue with contact imports

Is the bulk API having validation issues? I can update any existing or create any new imports.
Simply posting the content below from the tutorial now results in a validation error:
"name": "Docs Import Example",
"fields": {
"firstName": "{{Contact.Field(C_FirstName)}}",
"lastName": "{{Contact.Field(C_LastName)}}",
"emailAddress": "{{Contact.Field(C_EmailAddress)}}"
"identifierFieldName": "emailAddress",
"isSyncTriggeredOnImport" : "false"
Here is the error:
"failures":[{"field":"identifierFieldName","constraint":"Must be a string value, at least 1 character and at most 100 characters long."},{"field":"name","constraint":"Must be a string value, at least 1 character and at most 100 characters long."},{"field":"fields","constraint":"Is required."}]}

Seems like an issue with UD_ADUSER_LOCKED field value. Change it to non null value and retry.

.mov movie made with iMovie imported in iTunes

I made (with iMovie) a movie and imported in iTunes where it works perfectly. But when I go to advanced to use "convert selection for ipod" I can't. I have only the line convert to mp3.....
Any help? Maybe iTunes doesn't convert .mov files for iPod use?
THANKS

probably yes, but I'm not able to open the .mov file in imovies. I made it when I had imovies 04 than after upgrading to imovies 06, all the files look like quicktime files and I can't open it in imovies 06.... So, now I have only the .mov file. It works in quicktime and iTunes but not anymore in iMovie. Any idea?
Thanks in advance!

Issue with ProRes importing into Premiere CC in Windows

Hey all,
I realize the futility of using ProRes in a Windows environment, so I figured I'd just get that out of the way right off the bat. This is how I received the footage from the client and it's too much to try and convert into another codec (though if I must, I will, I'd just like to avoid it). Even so, I didn't really have an issue with this until I tried to work in CC.
I started this project in Premiere CS5 and was having no issues. I received some AE files in CC and decided I'd bite the bullet and move to the latest and greatest rather than try and rebuild the projects in CS5. I download, install, update, open up Premiere to rebuild the short edit, and then find that when I import ProRes files, all I get is audio, no video. I can import other codecs just fine, it's just ProRes that's refusing.
I've made sure Quicktime and the Windows QT Decoder for ProRes are updated, as well as Premiere CC. I've currently got all my work files bundled up on a drive to take to my 9 to 5 and work on a Mac on my lunch break, but for obvious reasons, I'd like to be able to work at home.
This client doesn't provide enough work to warrant a new Mac purchase, and I'm just at wit's end. It worked fine in CS5, why not in CC?
Here's my specs:
Windows 7 Professional 64 bit
Premiere Pro CC 7.0.1
Quicktime (fully updated)
Quicktime ProRes Decoder for Windows (fully updated)
Any help you can provide is greatly appreciated!

cc,
cc_merchant wrote:
Have you seen the WARNING here: Balanced Systems.
The warning about Quicktime makes sense. I was aware that Quicktime 7 has never been updated to 64-bit, but the obvious 4GB RAM limitation had never occured to me. Makes sense. I have a very decent machine, yet all of my Canon DSLR and GoPro projects are more cumbersome to edit than even AVCHD files. I've spent a little time thinking it over and running some side-by-side tests. MOV vs. AVI (same video) Editing, scrubbing, playback—all while running Task Manager on top. But I didn't need task manager to tell me that the AVI plays back, layers and layers, smooth as butter. The .MOV footage struggled to keep up with my random access cuts to different locations within the same video file.
cc_merchant wrote:
most sane PC users would NEVER install QuickTime...
So now I'm fascinated. So many questions: Why do so many cameras create .MOV or .MP4 files that require QuickTime components? 64-bit QuickTime X has aparently been available on the Mac for quite a while, yet I presume they won't allow anyone else to develop a 64-bit codec for Windows, so why hasn't someone sued Apple for monopoly, anti-trust, conflict-of-interest, etc? And most importantly, how would a sane PC user go about editing MOV and MP4 files without going insane transcoding hours of footage?

My Mac shut down when I try to export a movie (with iMovie). What can I do ?

Hi !
Since a couple of weeks, I try to export a movie i've done with Imovie, but my mac keeps shutting down again and again before the work is done. Can anybody help me ?
Thanks.

I dont know its the wifi at work...ssshhh dont tell. I will try it at home where I know it is hi-speed.

Keynote export and issues with iMovie import

Similar Messages

Maybe you are looking for