Keynote: need to install keynote in my MacBook Pro; the AppStore says I need to have OS X 10.7.4 but it also replies that my OS X 10.6.8. is already updated. What can I do?

Keynote: need to install keynote in my MacBook Pro; the AppStore says I need to have OS X 10.7.4 but it also replies that my OS X 10.6.8. is already updated. What can I do?

You need to either upgrade your OS or buy install an iWork 09 DVD. If you're using a Core 2 Duo or better Mac with at least 2GB of RAM, it's cheaper to buy 10.7 or 10.8 unless you'll also need to upgrade any other software such as Microsoft Office 2004; neither OS supports PowerPC applications. If you're using a Core Duo Mac, you must buy the iWork 09 DVD.
(74749)

Similar Messages

  • I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!

    I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!

    Doc Tzee wrote:
    I'm in the Admin account!  What's MBP? I'm pretty new to Mac.
    MBP = MacBookPro
    Are there other accounts? Is it possible Firefox was installed on one of them?
    Have you run Repair Permissions?

  • Recently bought a MacBook Pro 13 inch with apple care and since day one has not been able to hold a charge more than an hour. Is this covered? What can and will apple do for me?

    So I bought my MacBook Pro 13 inch with AppleCare protection about 2 weeks ago and from the moment it came out of the box I noticed that the battery was draining very quickly. Perhaps in the midst of my excitement of having a new computer I ignored it thinking it could somehow get better but obviously it has not. Average after being fully charged from being dead the batter lasts maybe an hour to an hour and a half. I'm assuming apple will take care of this seeing as it came to me like this but that's exactly my question, will they? Any information about what they cover or how to go about getting this fixed is very much appreciated!

    You are covered under the 1-year warranty.
    You have a 14 day grace period to exchange it for one that works.
    Past that, get it looked at
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • I keep trying to sync things among my MacBook Pro, iPAD, and iPhone.  Usually this works fine for a few days, but then I notice that the calendars aren't syncing and the "notes" aren't syncing.  How can I get them all to stay in sync?

    I have a MacBook Pro running OS X Yosemite, version 10.10.2.
    I have an iPad 2 running 8.1.3
    I have an iPhone 6 Plus running 8.1.1
    I have my Mail, Contacts, Calendars, and Notes set up to sync over iCloud among the three devices.
    I haven't had a problem with the Mail or Contacts syncing (at least not as far as I know), but the Notes and the Calendars don't seem to stay sync'd up.  I will notice that they aren't sync'ing, will delete and re-sync and they are fine for a while, but inevitably they stop sync'ing at some point.  This has been true through earlier incarnations of operating systems, so not something new.
    How can I get them to sync and stay sync'd?

    Soundman562 wrote:
    There used to be a tab under Itunes that allowed you to select to sync things like calendar, notes etc. but this is no longer there, can anyone help?
    This was removed in 10.9.  You may have better luck getting assistance in the relevant Mac forum.

  • Installed 8GB Ram into Macbook Pro, System Report says it only has 2GB RAM

    I decided to upgrade my 13.3 inch MacBook Pro from 4GB Ram to 8GB Ram.
    I purchased two Crucial 4GB Ram from two different dealers on Amazon and installed them myself.
    I turned my MacBook on and now it says that only one slot is being used and that it is a 2GB.
    I have a feeling that either one of the Ram slots has failed, however it still puzzles me that it says that 2GB of RAM is installed? Is there any way of refreshing the 'About This Mac' or is there anything to make the Mac recogise this problem?
    Thanks in advance

    open the mac back up and make sure both ram modules are seated properly.  It takes a little hard push to get them seated and you will hear a click/snap when they are seated.  To determine if a ram slot has failed, simply put back in the old ram, and if both slots are recognized, the problem is with the new ram.

  • Where can I get Install software for a MacBook Pro 2007

    Where can I get Install software for a MacBook Pro 2007

    Call Apple and see if they have it available and the cost, try 1-800-MY-APPLE

  • Cannot Install CS6 on my MacBook Pro.

    I cannot install CS6 on my Macbook Pro.
    It says to re-install but I can't un-install and some components may be missing.
    Error Code: 1
    Please help, in desperate need.

    What Mac? What version of OSX? Exit code 1 basically means that your system is not compatible at all. As a start, run the Creative Suite Cleaner Tool and try again - assuming you are on a supported system.
    Mylenium

  • Is there any way to install keynote on my macbook pro if I have version 10.6.8 of OSX

    Is there any way to install keynote on my macbook pro if I have version 10.6.8 of OSX

    You need to install the DVD version of iWork. If desired, ask the Mac App Store support for assistance.
    (70987)

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

    i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

    Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
    There are ways to do this however, try searching Google for:  Installing Logic 8 under Lion or Mountain Lion.

  • I have pages, numbers and keynote on my macbook pro, but when i try to use the apps on my new iMac it will not let me save

    I purchased Pages, Numbers and Keynote for my MacBook Pro and iPad last year.  I just purchased a new iMac for my wife and it came with iWorks.  When I try to save a document on the iMac it tells me I must buy an iWorks serial number, but the App Store shows the applications as installed and will not process the request.  How do I correct?

    Did you pay for iWorks to come preinstalled on the iMac? Because it sounds like what you have is a trial version, which is why it is stating that you need to buy a serial number.
    I suggest that you delete the entire trial iWorks suite. Once they are safely in the Trash where the Mac App Store can't see them, you can sign into your account on the MAS and download the MAS versions that you own a license to use.

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.

    can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?

    I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
    Can I start from USB Memory? with files from SL DVD? or have some thing else?
    I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
    I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
    Really Thanks for any help.
    Pablo

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

Maybe you are looking for

  • Problems with Hotspot after upgrading to OS 10.3.1.1565

    SInce i have upgraded the OS to the lastest version on my Q10, the Hotspot has stopped working. Previously it was was working absolutely perfectly. I have checked other support forums and a lot of users are facing the same problem after upgrading to

  • My email has been lost and I can't connect to it can you help me please

    In the last twenty four hours I have not been able to receive email . A message would say that my password or email address was wrong I have repeatedly tried turning my email off and on  Now i am really lost and I need my email to be on because of sc

  • Setting jtree objects' color

    Hi all I have a small (?) problem changing the background color of a jtree object. I change the background color to black with setBackground method but the objects in it remains white. I want them to be in black background color, too. and I couldn't

  • Sending object between client server with some class without serializable

    Hi friend, I need to send the object from server to client via ObjectInputStream and ObjectOutputStream, however, in these objects, some are implements by others, no source code provided, which haven't implement serizlizable, so does anyone can tell

  • Problem in Activating Contract

    Hi all, I am creating Contract in REFX while creating contract I am activating the contract. It is showing the error "Activation is not possible due to warnings (Partner Assignment)" Message no. RECN027 Can anybody help me in this? Thanks in advance.