Keynote presentation very blurry after exporting from imovie 08

1. export keynote presentation as Quicktime .h264 size 512x384. The exported file is a .mov and the picture quality very good.
2. Import .mov file into imovie as an event.
3. Create a new project and drag event into project
4. Share/export using quicktime
5. End result is .mov but picture quality very blurry
Any suggestions as to why the final result is so poor quality?
I have tried most combinations of file type/settings/filters.
Any help would be appreciated
jebriordan

I converted it to QuickTime using the codec and frame rate you mentioned, but when I opened the converted file in FCE, the video played but there was only beeping for the audio.
I'm not sure what you meant by making my sequence settings and my media settings match, if you could give me a step by step to check that, that would be helpful. (I'm very new to this, so I don't really understand what you're talking about there.) My camera shoots in .mod format. I think iMovie then imports my .mod files and saves them as .mpeg files. Then it saves my projects as .m4v files. (That may be incorrect. That's just my guess as to why I had the movie in .m4v format, because I didn't do anything to it other than save it.)
Message was edited by: rcpii at 1540 EDT

Similar Messages

Why do my pictures become blurry after exporting from lightroom 5?

My pictures become somewhat blurry or not as sharp after I export them from lightroom 5. PLEASE HELP!!!

If you are looking at your exported pictures in preview.app than that is the culprit. It uses an extremely poor downscaling algorithm for displaying large images and will make every large image, no matter how sharp originally, display blurry. In preview you can hit command-0 (that's a zero) to make the image display 1:1 to see the actual detail. Make sure you have it's preferences in the images panel set to "Define 100% scale as 1 image pixel equals 1 screen pixel". I think in older Mac OS X versions, it was called something like ignore image dpi for display or so but I don't remember. You can also make sure to downscale (with correct output sharpening in the export panel) upon export from Lightroom. If the exported image is smaller than the display, Preview should display 1:1 by default upon opening.

Screen recording becomes blurry after exporting to iMovie

After creating a screen recording using Quicktime (and the video is perfectly clear), I am trying to export to iMovie to edit the video more easily and to add an audio track. However, once the video is turned into an iMovie project, it is blurry. Still blurry after stabilization too. Please help!

After creating a screen recording using Quicktime (and the video is perfectly clear), I am trying to export to iMovie to edit the video more easily and to add an audio track. However, once the video is turned into an iMovie project, it is blurry. Still blurry after stabilization too.
Is this a minimum information guessing game? Is this a "full" or "partial" screen recording? What are the actual dimensions of the screen capture? Was the capture made using QT or a third-party app? Did you perform a manual or automatic "export" or simply import the screen capture file to iMovie? In what type iMovie project are you editing the exported or imported screen captured file? Why are you stabilizing a screen recording? (I.e., the stabilization routine further rescales the content.)
If I were merely to make a guess, It would be that your work flow is rescaling the content making it blurry in iMovie as compared to the original capture file.

After export from imovie pictures skips

After I import from camera and into imovie(Where the video plays perfectly), But when I export the movie the picture skips. I tryed to export via quicktime and set it as pal and all others. When I export it´s like the whole camera is shacking but audio is good. What do I do?

Also three other things to add:
1. The video on both computers is presenting in a 4:3 format instead of 16:9.
2. The Second computer presenting the video is a 400 MHz G4 Tower with 10.3 OSX
3. The audio is completely fine but there is no video.

Missing Scenes of Project in iDVD after exported from iMovie

So I finished a project in iMovie, the project is around 1.5 hours. I've made it into 20 different scenes (chapter mark), but when I export it to iDVD there are 2 scenes missing. I already change the encoding settings to Professional Quality but it makes no difference the scenes are still missing.
Anybody know what to do?

Yes, it is very clear and very confusing. I don't think chapter markers are the problem.
Is the video all from the same source? In other words, if the video in chapters 3 and 4 are in an odd .avi format, for example, perhaps iDVD is having trouble handling it and the video needs to be converted to another format.
You may also wish to try some of the basic strategies suggested in this forum -- make sure your versions of iDVD and QuickTime are up to date, make sure there's enough hard disk space on your main HD (15+ G on boot drive), delete your preference file for iDVD (plist file) since it can become corrupted, empty your iDVD cache...
John

High CPU usage after export from iMovie

Makes you go hmmmmm...... Mavericks 10.9.4, 2.3 GHz i7 16 GB 1 TB. 33% full. A 32 minute camcorder movie. No editing just export. Latest iMovie and everything else no added plugins or 3rd party anything. While exporting the movie 1280X720 it uses about 200% CPU (2 virtual cores)? After the export is done it starts using about 350% CPU and will do so forever. I thought maybe it was straigtening up afterwards but it went on for about a half hour. This causes me no problems but like I said it made me go hmmmmmmm..... In case you couldn't tell I'm a newbie. I had XP for about 800 years and this is my Christmas present. It's wonderful.

Yes they are in the same folder. After I added my Exchange account under Configuration | Mail, Contacts & Calendar, mail started to eat CPU time. If I look a the activity window of mail I see a message "downloading incoming messages" in chunks of 50-100 messages every few minutes. Maybe this is the downloading of bodies (and attachements) of my large 50K messages archive map.
I just disabled the mail part of the Exchange account under Configuration | Mail, Contac ts & Calendar and the CPU eating seems to stop. I'll just see the coming hours.
I currently do not use any mail plugins.

PDFs dull in Acrobat after exporting from Indesign - again

Hi folks,
I am aware of a previous post which discussed this issue which was apparently resolved, but it appears to have reared its ugly head again. The problem - since updrading to Mavericks and the Creative Cloud, pdfs in Acrobat are very dull after export from Indesign and it is not a transparency blend or Indesign issue. I understand Adobe blamed Apple for not updating their colour management software and the reply from Adobe was:
"We have found the root cause of this issue and are in process of providing a fix. Once this is done, we will test it to make sure that it works as expected and will release an update patch for all our users."
I am running the latest version or everything but it appears to still be a problem. I have also uninstalled Acobat XI and tried earlier versions without success. I have a print job to send off tomorrow and I am very nervous about how this will print.

Sorry about that, I apparently forgot to attach the file; have done so now.
The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
We cowboy up and seek solutions, eh?

Keynote Video Quality Deteriorates when exported to IMovie

How does one export a keynote presentation to IMovie without losing the video quality? It is extremely blurry after export. Or how does one "clean up" the quality, after it becomes blurry?

Is that the only way to transfer keynote animated videos to imovie? Use something else besides IMovie??? I thought the new apple program was supposed to be able to do these "basic" kinds of things really well, in a user friendly way.
How do I get Final Cut, and will I be able to use it as a neophyte?

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

IDVD: Files exported from iMovie 11, one works, one "Unsupported File Type : Unknown format"

I used footage from the same camera (taken on the same weekend using the same settings) in several different iMovie "projects". All were shared from iMovie 11 as "File" using the quality setting "SD 480p".
In Quicktime Player, all ".mp4" files will play and they show the following info in its inspector:
Format: H.264, 854 x 480
AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
One exported file will drag, drop, and burn in iDVD just fine. The other two files show the error "Unsupported File Type : Unknown format" as soon as I try and drag them into iDVD.
The only difference I can find is that the one file that works is about 803MB, while the files that don't work are 1.87GB and 3.98GB.
All files and the iDVD project are in the same folder on my startup volume. I've tried deleting com.apple.idvd but that didn't help. I've tried rebooting and starting the iDVD project from scratch but I get the same results.
Mac OS 10.9.1
iMovie 10.0.1
iDVD 7.1.2
Any ideas?

Hello Bengt and thank you again for the replies.
As I mentioned in my previous posts, I'm using iMovie 10.0.1 which has very limited quality adjustments. In every case I chose the smallest size, which iMovie 10.0.1 calls "SD 480p (854 x 480)". I used this same setting on all exports.
I still have iMovie HD (6.0.4) and iMovie '11 (9.0.9) on my iMac so I tried both of them. In both cases, they could import only the file that works in iDVD. Both older versions of iMovie choked on the longer movies shared from iMovie 10.0.1.
I have many many hours into the editing of these clips and I do not want to have to go back and redo everything in an older version of iMovie. Might I be better off going with a different DVD creation software? Or am I out of luck? Because I can't really change iMovie 10.0.1's export settings, I'm afraid there's nothing I can do to get it to export it as something that iDVD can use (really, I can't even tell why it's different and why iDVD doesn't like it).
The software "WonderShare DVD Creator" has no issue with any of the files I've exported from iMovie 10.0.1.

Best way to export from iMovie so that clip will play in Powerpoint on Windows?

Does anyone know the best settings so that a movie exported from iMovie will play in Powerpoint on a Windows machine? Thanks.

You need one of the more expenseive Flip4Mac options. Flip4Mac Studio, Studio Pro, Studio Pro HD, for example.
Flip4Mac supplies a video component. To do the conversion, you need a tool like QuickTime Pro or Compressor. You take the file you created in iMovie and convert it using QuickTime Pro using the supplied component.
It is possible that a free tool like MPEG Streamclip would do the conversion (after purchasing the Flip4Mac components) but I haven't tried it personally.
You cannot do this conversion from within iMovie. You need to SHARE from iMovie, then convert.

Best method for exporting from iMovie?

I have been having a lot problems with exporting from iMovie. I have a 30 minute movie that I want to compress to a file around 400~500mbs. I found the best results with Divx and .Avi files. Unfortunately, after I installed Tiger, I noticed that the audio was faster than the video, like " old kung-fu movies ".
I read in other forums that there are many problems with Divx compatibilty with Tiger. Whie waiting for a new version of Divx, can anyone give me some advice on the best way to export a movie from iMovie( good audio and video quality) thanks in advance!!

http://www.danslagle.com/mac/iMovie/tips_tricks/6007.shtml

Quick Question (re:exporting from iMovie into iDVD)

Hello everyone!
I just have a quick question for you all... (I want to see if this is normal - I'm on a deadline and this is kind of freaking me out)
So, we have a 20 minute or so video in iDVD. It plays fine, etc etc. The goal is to burn it to a DVD.
I used the "Export -> to iDVD" function in iMovie, which launched iDVD.
But here is the weird thing: nothing comes up in iDVD. It doesn't make a new file, doesn't give me anything... it is just open, waiting for me to create a new project to work with.
YET, if I look in the Activity Monitor, I do see that EncoderServer (using 123% CPU) and ThumbnailServer (both iDVD processes) are running.... but shouldn't iDVD have told me it is working or that it is dealing with data?
This is very un-"apple". I totally would have expected a progress bar of some sort in iDVD telling me it is working or something.... or is something wrong and I should try to export it in a different way?
(I guess the underlying question is: when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)

Hi Matt!
when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)
Yes, and it's instant.
What you should see is iDVD opening and asking you to create a new project, It will suggest naming it the same as the iMovie project.
There are reports that exporting from Imovie to iDVD can produce problems. What I do is save the iMovie project and close iMovie. Open iDVD, create the new DVD project, then go the File menu in iDVD, scroll down to Import, and in the side menu select Video. This open your Movie Folder, wherein resides your iMovie project. Select it and it imports into iDVD in a flash.
Remember: iMovie projects go in the Movies Folder, iDVD projects go in the Documents folder. Change that, and they get very confused and unhappy.

Audio drops when movie exported from iMovie into iDVD

Hi there,
I am a problem which I can't seem to fix.
I have created a 7 minute long slideshow in imovie with MP3 files from iTtunes embedded. The video and audio are fine when exported as a MOV file (and within iMovie itself). But when exported into iDVD for burning, the audio drops out completely after 3 and a half minutes.
I've tried updating iMovie, iDVD etc., deleting encoded assets as it says to do here: http://support.apple.com/kb/TA24043?viewlocale=en_US
to no avail.
Does anyone have any tips? My friend's wedding is on Saturday!
Thanks so much.
RR

Hi
A. I do not use "Share to iDVD" - BUT "Share to Media Browser" and as Large (not HD or other res.) - Works much better.
B. When did it hang ?
a. On Export from iMovie to iDVD
b. When DVD is played on DVD-Player
If last one - then
• What brand of DVD did You use (Yes it matters)
• What type of DVD
• Free Space on Start-Up hard disk - How much
• Burn speed - did You set down this - I do to x2 or x4
Yours Bengt W

No sound when exporting from imovie 3,03

After having read most of the posts related to sound troubles, I still can't figure out why I can't get any sound when I export from imovie 3,03.
I almost know the entire dan slagle site, and checked every button to play with, I've tried many export or preferences settings (including various depths or rates) but got no result at all.
Surprisingly, when I grab the .mov file to some converters (ffmpegx), the expected audio part looks to be there, but remains silent (for me, meaning all of the bits at 0).
Don't hesitate to require additional info - thanks to prompt answers
G5 2xPPC Mac OS X (10.3.9)

hurrah !
i just downgraded QT 7.x to 6.5.2 and it worked fine at last.
From the informations I've gathered, DO NOT RUN QT 7.x WITH OSX 10.3.9
For those who would follow the appropriate steps to get rid of v7, go to : http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
and don't miss : http://www.charlessoft.com/
Thanks a lot to Brie Fly for its so helpful comments.

Keynote presentation very blurry after exporting from imovie 08

Similar Messages

Maybe you are looking for