Keyword and import problem with V2

When I use the import from disk option it applies a keyword that is not been inputted. The keyword import dialog box is blank when importing or not in the keyword dialog area.
I use a hyperdrive drive space as my card reader (reason to import from drive option).
These are new additions.
The does not contain the keyword that it is adding.
V1.41 works properly when inputting the same pictures.
Where can I delete this keyword?
OS WinXP SP3

>Dorin Nicolaescu-Musteata - 8:22am Sep 16, 08 PST (#1 of 1)
> Where can I delete this keyword?
>Maybe you have a Metadata Preset selected in Import dialog...
It is not a Metadata entry.
After an import the keyword in question shows up in the keywords
To clear the the entry I select all and delete the keyword

Similar Messages

  • Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

    I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
    In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
    My System:
    WinXP Pro SP2
    2.93 GHz Intel Celeron CPU - single core
    Intel PERL mobo
    3GB 400MHz RAM
    NVidia 7800GS video
    I mention these specs however I am not experiencing any hardware
    related bugs or issues (like out of memory or video driver crashes
    etc) when using any CS3 app.
    The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
    footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
    Attempting to import as timeline causes Encore CS3 to hang.
    Importing as an Asset allows it to import but when I try to click
    on it in the project windown to add it to a new empty timeline,
    Encore hangs. It plays fine in Windows Media Player.
    footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
    Imports fine as either a timeline or asset but no audio track comes
    with it, even though there is an audio track in the footage. It plays
    fine in Windows Media Player. Video imports perfectly, just no audio.
    footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
    Imports fine as either a timeline or asset but no audio track comes
    with it, even though there is an audio track in the footage. It plays
    fine in Windows Media Player. Video imports perfectly, just no
    audio. I tried converting this one using AVS to both MPEG3 and DivX,
    each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
    upon importing into Encore CS3. I also loaded it into Camtasia
    Studio and it looked fine over there. The audio was present and I
    was able to export it as a .WAV file. When I tried looking at the
    file in Soundbooth CS3, there was no audio track or, more
    accurately, the audio track was a flat line.
    By way of comparison these are importing perfectly:
    footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
    channels LAME3.96r, 717436 KB.
    footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
    channels (3/2 .1), 716418 KB.
    footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
    channels (3/2 .1), 716418 KB.
    footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
    (3/2 .1), 717502 KB
    footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
    (3/2 .1), 717180 KB
    footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
    (3/2 .1), 2291904 KB
    Although this one imported & transcoded correctly, when I went to
    build it to a DVD image file I got some strange errors during the
    "planning video" stage that prevented the process from completing.
    Unfortunately I neglected to write down the error message I recieved
    which read like quite nonsensical babble to me, and I have since
    deleted the project folder. I remember it was not a memory or
    display related error and it included a timestamp where the error
    was happening. I played the footage in the preview panel thru the
    identified timestamp but it previewed perfectly without even a
    jitter in either the video or audio. Took forever to transcode so I
    doubt I'll be doing this one again anytime soon.
    Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

    Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
    Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
    The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
    Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

  • Mail and iPhoto Problems with sending photos.

    Mail and iPhoto Problems with sending photos.
    I have this problem that started a while ago and seems to be getting worse.
    Here are the different scenarios.
    -If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
    -If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
    -If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
    -If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
    -If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message  I get a message it can't be opened because it is empty.
    -If I drag that same image to the mail message body the same thing happens.
    -If I send that email to someone they cannot open the image file.
    What I can do:
    - I can drag that same image file on the desktop to my dropbox folder and  it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
    -I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
    -I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message.  I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
    I can send that message to someone and they can see the photo and open it fine.
    -If I send that same email to me I can see the photo within the mail.  If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
    I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
    I am stumped, all and any help is appreciated.

    Another problem that may be related….
    I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message  "Files cannot be created in the selected location. You do not have permission to write to the selected location.   Please choose a different location."  I have found that i can only save the file to the clipboard.   I have repaired permissions many times and still I have this problem.

  • I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

    I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1.  Why am I having this problem?

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I have Iphoon 4 and ihave problem with speaker what i have to do?

    I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
    I have got my IPhoon from London U.K. Now i'm in Saudia Arabia

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have ipad 2 and facing problem with programs swtching off

    I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

    I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

    The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
    Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
    Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

  • Just purchased Wndows Vista and having problems with the port for Palm 125

    I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop.  I get an error message saying:  "Com1 not available"  What do I do?
    Thanks,
    Frustrated
    Post relates to: Palm m125
    This question was solved.
    View Solution.

    Sorry, that didn't work.  I get no drop down menu from the Hot Sync Manager for the Serial Port.  What comes up often is:  "The selected port, COM1, is not available at this time.  Hot Sync Manager will open the port when it becomes available." 
    Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port?  Just a thought.  Thanks for your help.
    Post relates to: Palm m125

  • Scanner and fax problems with the Officejet 7410 AIO

    Hi
    I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
    Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
    Thanks
    Bye
    balubeto

    Hi balubeto,
    Welcome to the HP Forums!
    I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
    I would recommend the following:
    Run the HP Print and Scan Doctor, to diagnose the issue.
    Uninstall the software. Uninstalling the Printer Software.
    Re-install the software using the HP Printer Install Wizard for Windows.
     Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

  • I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

    I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

    Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
    For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
    More about Image artifacts/errors related to video scaling here :  http://en.wikipedia.org/wiki/Video_scaler
    Test configuration :
    Windows 7 x64
    Intel HD Graphics with lastest available drivers from manufacturer.
    Any solution from Adobe?

    Could you please open a new bug report on this over at bugbase.adobe.com?  Please post back with the URL so that others affected can add their comments and votes.
    Thanks,
    Chris

  • Power and Sync problems with Zen Vision:M

    )Power and Sync problems with Zen Vision:MX Lately, my Vision M is having problems that when I plug it into the USB port on any PC to charge it, it lights up for a moment and then goes blank.
    When I unplug it and reseat the usb cable, nothing happens. When I try to turn it on, it's dead. This happens even though it's not fully depleted of battery energy.
    Pressing the reset button does not do anything. The only thing that I've found that will work is to open it up and unplug the battery. But even that is starting to not work.
    This doesn't happen every time I use it, but it is happening quite a bit. It's gotten to the point today that I can't even charge the battery at all.
    Any suggestions? I don't think it's the battery, as it does charge when I don't have these issues, but I'm not really positi've of that either.

    The connector on the motherboard check it . It may need to be resoldered. The last time I ran into those symptoms that was the solution.

  • ICal 3.x .ics import - problem with recurring events and non-unique UIDs

    Upgraded to Leopard over the holiday break. Under Tiger's iCal (v2.x), .ics files exported from other calendar programs (Outlook via iAppoint/O2M in this case) and imported into iCal behaved 'normally'. However, in iCal 3.x in Leopard, for recurring appointments in the exported calendar, only the last appointment in the series shows up in iCal (although some meetings show up for about 0.25 seconds during the calendar import, then immediately disappear! This post by MalcolmS provided the critical clue - it seems that for recurring events, the .ics file has all of the events in the series with the same UID. Previous versions of iCal didn't care, but v3 apparently does - and deletes all earlier versions of the event, leaving only the last one with that UID. I confirmed that is the case by opening the .ics file in Word, which clearly showed all of the recurring events, and all the events in a series (e.g. a weekly meeting for the year) had the same UID. After the import to iCal, only the last one is in the calendar (in the above example, the one meeting of the series occurring in the last week of December). Manually editing the UIDs of a recurring series in the .ics file (to make them actually unique) allows them to all show up in iCal after import.
    Since many of the events in my Outlook calendar are accepted invites for recurring appointments, re-creating them as individual calendar events in Outlook is not a viable option. The frequency of changes to my calendar means I usually export it once per day (or twice); thus, manually editing the .ics files is also not a viable option.
    Any suggestions on workarounds for this problem? Alternatively, any other suggestions for getting the calendar data from Outlook into iCal?
    Thanks in advance!

    Moot point, as direct iPhone access to the Exchange server is now supported by our IT department.

  • Start-up / shut-down (and other) problems with ZFS over iSCSI

    Hi,
    I've had a limited time in which to try some concepts on an evaluation x4500 server. This is unfortunately my last day, so by the time anyone can reply I will probably not be able to to further tests, but maybe someone will be able to reproduce the issues.
    I'm using the evaluation server to export some iSCSI targets, and I'm connecting to them from my laptop, which has a fresh installation of SXDE 01/08. I was able to attach to the targets with
    iscsiadm add static-config \
    iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8,192.168.15.62
    iscsiadm add static-config \
    iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865-baef90fb71ce,192.168.15.62
    iscsiadm add static-config \
    iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23,192.168.15.62
    iscsiadm modify discovery -s enableThis made the appropriate entries appear in /dev/dsk so I could then set up a simple zpool and zfs filesystem with:
    zpool create -m none dPool c3t010000144FA70C1400002A0047C2BF73d0 \
    c3t010000144FA70C1400002A0047C2BF81d0 c3t010000144FA70C1400002A0047C2BF8Bd0
    zfs create -o mountpoint=/data -o sharenfs=on dPool/dataThe general concept I'm testing is having a ZFS-based server using an IP SAN as a growable source of storage, and making the data available to clients over NFS/CIFS or other services. In principle this solution should also allow failover to another server, since all the ZFS data and metadata is in the IP SAN, not on the server. Although not done in this example it should also be possible to run raidz across multiple iSCSI disk arrays. However, it's not been a bed of roses. I've had a lot of errors in dmesg like the following, which I think are causing zfs/zpool commands to stall at times:
    Feb 28 14:30:39 F4060 iscsi: [ID 866572 kern.warning] WARNING: iscsi connection(ffffff014f6b6b78) protocol error - received an unsupported opcode:0x41
    Feb 28 14:30:41 F4060 iscsi: [ID 158826 kern.warning] WARNING: iscsi connection(10) login failed - failed to receive login response
    Feb 28 14:30:41 F4060 scsi_vhci: [ID 734749 kern.warning] WARNING: vhci_scsi_reset 0x1
    Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
    Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23
    Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
    Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8Does anyone know why a Solaris iSCSI target would send an unsupported opcode (0x41) to a Solaris iSCSI initiator? Surely they should be talking the same language!
    The main problems however are with shutdown and start-up. On occasions, I suspect that the ordering of ZFS, iSCSI and network services gets a bit out of sync. On one occasion the laptop even refused to complete the shutdown because it was reporting a continuous stream of console messages like
    Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e
    -afe60e13db23
    Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(10) unable to connect to target iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865
    -baef90fb71ce
    Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-
    943d8861c9e8I also get these on start-up, where it looks like ZFS tries to load the zpool configuration before iSCSI has found the disks, and even worse, iSCSI is starting up before nwamd has time to do its network auto-magic, and complains that the devices are unavailable.
    If these problems sorted themselves out after everything came up, I wouldn't really mind some temporary complaints in the log file, but what I get after a reboot is a working zpool but an unmounted ZFS filesystem! Here is what I have today:
    bash-3.2# zpool status
      pool: dPool
    state: ONLINE
    scrub: scrub completed with 0 errors on Thu Feb 28 14:33:43 2008
    config:
            NAME                                     STATE     READ WRITE CKSUM
            dPool                                    ONLINE       0     0     0
              c3t010000144FA70C1400002A0047C2BF73d0  ONLINE       0     0     0
              c3t010000144FA70C1400002A0047C2BF81d0  ONLINE       0     0     0
              c3t010000144FA70C1400002A0047C2BF8Bd0  ONLINE       0     0     0
    errors: No known data errors
    bash-3.2# zfs list
    NAME         USED  AVAIL  REFER  MOUNTPOINT
    dPool        480M  28.9G     1K  none
    dPool/data   480M  28.9G   480M  /dataThis all looks fine, and you can see that I was even able to scrub the pool data with no problems. But where are the 480MB of data I have put in the /data mountpoint:
    bash-3.2# ls /data
    bash-3.2# df -h /data
    Filesystem             size   used  avail capacity  Mounted on
    /dev/dsk/c1d0s0         15G   4.4G    11G    30%    /As you can see, /data is unmounted, causing df to revert to the / filesystem containing the empty /data mountpoint, instead of showing the zpool mount.
    Since zfs is supposed to take care of its own mounts rather than using vfstab, I can't use "mount /data" to force this to mount. The only workaround I've found is to export and import the zpool. Then I get the filesystem to reappear:
    bash-3.2# df -h /data
    Filesystem             size   used  avail capacity  Mounted on
    dPool/data              29G   480M    29G     2%    /dataDoes anyone know if these are known issues with snv_79b, and is there a fix available or in the works?
    TIA,
    Graham

    EasyE, Welcome to the discussion area!
    (a) Call Apple and get your iMac G5 fixed since it is in the repair extension group. Don't waste your time doing anything else.
    (b) This area is for discussing the iMac G4. Since you have an iMac G5 in the future you should post in the iMac G5 discussion area.

Maybe you are looking for