Km2m onboard video

Hi I have a KM2M Combo motherboard and want to use my new pci video card. Do I need to do anything in the bios to enable it? also do I need to uninstall any exisiting drivers and if so were would I find them to unstall the onboard video drivers?

I've posted this before and I have this motherboard...this is how you disable on-board video...
In BIOS in "advances chipset features" > "agp and pgp bridge control" > "vga share memory size" from there you can set the amount of system memory to share or disable it.
Good Luck, Tom

Similar Messages

How do I Disable KM3M-V onboard video?!?!?!

Just rebuilt the wifes system with a KM3M-V mobo. Plug her ABIT Otes ti-4200 in and I cannot get a signal to come out of it. The only video that works is the onboard. How do I disable the onboard video?
BTW the manual for this board is like 7 pages long, terrible terrible support for this board so far. Thanks in advance for any help you guys can offer.
G

After owning an MSI KM133A PRO (MS-6340 V5), Biostar M7VIG Pro, MSI KM2M Combo-L (still have it), Soyo K7VME and P4VGM over the last couple years, all of which were tested with integrated graphics and AGP video cards, these things can be fickle!
I would recommend clearing the CMOS using the jumper and try booting again. That always worked for me.
If you get a display from the AGP card, enter BIOS and disable everything pertaining to the integrated video (if present). Some BIOS utilities automatically hide integrated VGA options when an AGP card is detected. Most recent boards have no option to disable integrated VGA in BIOS because it is automatically disabled when an AGP card is detected, though VGA memory share may still be present.
Also, reseat the AGP card and to make sure its all the way down.

[SOLVED] switching from onboard video to a pci express card

Hello,
I have an onboard video card [VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)].
I have been running the nouveau driver, but the video card is not truly supported so I bought a [VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)].
However my lspci -k | grep -A 2 -i "VGA" gives this:
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Kernel driver in use: nouveau
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: nouveau
Kernel modules: nouveau
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
And my xrandr -q gives:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1400x1050 60.0
1280x1024 60.0
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 66.0 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
I receive no output from the second card at all. Any help to troubleshoot this problem would be greatly appreciated. I simply would like to use one monitor through the VGA port on the new video card.
thanks.
Last edited by forshark (2013-05-30 19:10:25)

Thanks for the reply,
My bios isn't awesome enough to allow me to disable onboard video or set a default card. I'll hunt around for the rest. Also I am using lxdm if that is helpful. Heres my Xorg.0.log:
[ 4.803]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4.803] X Protocol Version 11, Revision 0
[ 4.803] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 4.803] Current Operating System: Linux office 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 4.803] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8e550028-e5f5-40c2-b8f9-f43ac9ebf8ef ro quiet
[ 4.803] Build Date: 17 April 2013 02:37:06PM
[ 4.803]
[ 4.803] Current version of pixman: 0.30.0
[ 4.803] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.803] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.803] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 12:51:52 2013
[ 4.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.808] (==) No Layout section. Using the first Screen section.
[ 4.808] (==) No screen section available. Using defaults.
[ 4.808] (**) |-->Screen "Default Screen Section" (0)
[ 4.808] (**) | |-->Monitor "<default monitor>"
[ 4.808] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.808] (==) Automatically adding devices
[ 4.808] (==) Automatically enabling devices
[ 4.808] (==) Automatically adding GPU devices
[ 4.812] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.812] Entry deleted from font path.
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.813] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.813] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.813] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.813] (II) Loader magic: 0x7fcc20
[ 4.813] (II) Module ABI versions:
[ 4.813] X.Org ANSI C Emulation: 0.4
[ 4.813] X.Org Video Driver: 14.1
[ 4.813] X.Org XInput driver : 19.1
[ 4.813] X.Org Server Extension : 7.0
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.816] (--) PCI:*(0:0:13:0) 10de:03d0:103c:2a6c rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 4.816] (--) PCI: (0:2:0:0) 10de:10c3:3842:1302 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 4.816] Initializing built-in extension Generic Event Extension
[ 4.816] Initializing built-in extension SHAPE
[ 4.816] Initializing built-in extension MIT-SHM
[ 4.816] Initializing built-in extension XInputExtension
[ 4.816] Initializing built-in extension XTEST
[ 4.816] Initializing built-in extension BIG-REQUESTS
[ 4.816] Initializing built-in extension SYNC
[ 4.816] Initializing built-in extension XKEYBOARD
[ 4.816] Initializing built-in extension XC-MISC
[ 4.816] Initializing built-in extension SECURITY
[ 4.816] Initializing built-in extension XINERAMA
[ 4.816] Initializing built-in extension XFIXES
[ 4.816] Initializing built-in extension RENDER
[ 4.816] Initializing built-in extension RANDR
[ 4.816] Initializing built-in extension COMPOSITE
[ 4.816] Initializing built-in extension DAMAGE
[ 4.816] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.816] Initializing built-in extension DOUBLE-BUFFER
[ 4.816] Initializing built-in extension RECORD
[ 4.816] Initializing built-in extension DPMS
[ 4.816] Initializing built-in extension X-Resource
[ 4.817] Initializing built-in extension XVideo
[ 4.817] Initializing built-in extension XVideo-MotionCompensation
[ 4.817] Initializing built-in extension XFree86-VidModeExtension
[ 4.817] Initializing built-in extension XFree86-DGA
[ 4.817] Initializing built-in extension XFree86-DRI
[ 4.817] Initializing built-in extension DRI2
[ 4.817] (II) LoadModule: "glx"
[ 4.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.822] (II) Module glx: vendor="X.Org Foundation"
[ 4.822] compiled for 1.14.1, module version = 1.0.0
[ 4.822] ABI class: X.Org Server Extension, version 7.0
[ 4.822] (==) AIGLX enabled
[ 4.823] Loading extension GLX
[ 4.823] (==) Matched nouveau as autoconfigured driver 0
[ 4.823] (==) Matched nvidia as autoconfigured driver 1
[ 4.823] (==) Matched nv as autoconfigured driver 2
[ 4.823] (==) Matched nouveau as autoconfigured driver 3
[ 4.823] (==) Matched nvidia as autoconfigured driver 4
[ 4.823] (==) Matched nv as autoconfigured driver 5
[ 4.823] (==) Matched nouveau as autoconfigured driver 6
[ 4.823] (==) Matched nvidia as autoconfigured driver 7
[ 4.823] (==) Matched nv as autoconfigured driver 8
[ 4.823] (==) Matched vesa as autoconfigured driver 9
[ 4.823] (==) Matched modesetting as autoconfigured driver 10
[ 4.823] (==) Matched fbdev as autoconfigured driver 11
[ 4.823] (==) Assigned the driver to the xf86ConfigLayout
[ 4.823] (II) LoadModule: "nouveau"
[ 4.823] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.826] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.826] compiled for 1.14.0, module version = 1.0.7
[ 4.826] Module class: X.Org Video Driver
[ 4.826] ABI class: X.Org Video Driver, version 14.1
[ 4.826] (II) LoadModule: "nvidia"
[ 4.827] (WW) Warning, couldn't open module nvidia
[ 4.827] (II) UnloadModule: "nvidia"
[ 4.827] (II) Unloading nvidia
[ 4.827] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.827] (II) LoadModule: "nv"
[ 4.827] (WW) Warning, couldn't open module nv
[ 4.827] (II) UnloadModule: "nv"
[ 4.827] (II) Unloading nv
[ 4.827] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.827] (II) LoadModule: "vesa"
[ 4.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.828] (II) Module vesa: vendor="X.Org Foundation"
[ 4.828] compiled for 1.14.0, module version = 2.3.2
[ 4.828] Module class: X.Org Video Driver
[ 4.828] ABI class: X.Org Video Driver, version 14.1
[ 4.828] (II) LoadModule: "modesetting"
[ 4.828] (WW) Warning, couldn't open module modesetting
[ 4.828] (II) UnloadModule: "modesetting"
[ 4.828] (II) Unloading modesetting
[ 4.828] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.828] (II) LoadModule: "fbdev"
[ 4.829] (WW) Warning, couldn't open module fbdev
[ 4.829] (II) UnloadModule: "fbdev"
[ 4.829] (II) Unloading fbdev
[ 4.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.829] (II) NOUVEAU driver
[ 4.829] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.829] RIVA TNT (NV04)
[ 4.829] RIVA TNT2 (NV05)
[ 4.829] GeForce 256 (NV10)
[ 4.829] GeForce 2 (NV11, NV15)
[ 4.829] GeForce 4MX (NV17, NV18)
[ 4.829] GeForce 3 (NV20)
[ 4.829] GeForce 4Ti (NV25, NV28)
[ 4.829] GeForce FX (NV3x)
[ 4.829] GeForce 6 (NV4x)
[ 4.829] GeForce 7 (G7x)
[ 4.829] GeForce 8 (G8x)
[ 4.829] GeForce GTX 200 (NVA0)
[ 4.829] GeForce GTX 400 (NVC0)
[ 4.829] (II) VESA: driver for VESA chipsets: vesa
[ 4.829] (++) using VT number 7
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (WW) Falling back to old probe method for vesa
[ 4.834] (II) Loading sub module "dri"
[ 4.834] (II) LoadModule: "dri"
[ 4.835] (II) Module "dri" already built-in
[ 4.835] (II) NOUVEAU(0): Loaded DRI module
[ 4.835] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 4.835] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.835] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 4.835] (==) NOUVEAU(0): RGB weight 888
[ 4.835] (==) NOUVEAU(0): Default visual is TrueColor
[ 4.835] (==) NOUVEAU(0): Using HW cursor
[ 4.835] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 4.835] (==) NOUVEAU(0): Page flipping enabled
[ 4.835] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 4.927] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4.989] (II) NOUVEAU(0): EDID for output VGA-1
[ 4.989] (II) NOUVEAU(0): Manufacturer: HSD Model: 240f Serial#: 0
[ 4.989] (II) NOUVEAU(0): Year: 2010 Week: 52
[ 4.989] (II) NOUVEAU(0): EDID Version: 1.3
[ 4.990] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 4.990] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 4.990] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 4.990] (II) NOUVEAU(0): Gamma: 2.20
[ 4.990] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4.990] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 4.990] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 4.990] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 4.990] (II) NOUVEAU(0): Supported established timings:
[ 4.990] (II) NOUVEAU(0): 720x400@70Hz
[ 4.990] (II) NOUVEAU(0): 640x480@60Hz
[ 4.990] (II) NOUVEAU(0): 640x480@67Hz
[ 4.990] (II) NOUVEAU(0): 640x480@72Hz
[ 4.990] (II) NOUVEAU(0): 640x480@75Hz
[ 4.990] (II) NOUVEAU(0): 800x600@56Hz
[ 4.990] (II) NOUVEAU(0): 800x600@60Hz
[ 4.990] (II) NOUVEAU(0): 800x600@72Hz
[ 4.990] (II) NOUVEAU(0): 800x600@75Hz
[ 4.990] (II) NOUVEAU(0): 832x624@75Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@60Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@70Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@75Hz
[ 4.990] (II) NOUVEAU(0): 1152x864@75Hz
[ 4.990] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 4.990] (II) NOUVEAU(0): Supported standard timings:
[ 4.990] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 4.990] (II) NOUVEAU(0): #1: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 4.990] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.990] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.990] (II) NOUVEAU(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 4.990] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.990] (II) NOUVEAU(0): #6: hsize: 1024 vsize 768 refresh: 66 vid: 18017
[ 4.990] (II) NOUVEAU(0): Supported detailed timing:
[ 4.990] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 4.990] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 4.990] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 4.990] (II) NOUVEAU(0): Serial No: 052AW1WY01107
[ 4.990] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 75 kHz, PixClock max 145 MHz
[ 4.990] (II) NOUVEAU(0): Monitor name: iP192A
[ 4.990] (II) NOUVEAU(0): EDID (in hex):
[ 4.990] (II) NOUVEAU(0): 00ffffffffffff0022640f2400000000
[ 4.990] (II) NOUVEAU(0): 341401030a291a78eade95a3544c9926
[ 4.990] (II) NOUVEAU(0): 0f5054bfee80950f90408180814081c0
[ 4.990] (II) NOUVEAU(0): 714f614601019a29a0d0518422305098
[ 4.990] (II) NOUVEAU(0): 360098ff1000001c000000ff00303532
[ 4.990] (II) NOUVEAU(0): 41573157593031313037000000fd0038
[ 4.990] (II) NOUVEAU(0): 4b184b0e000a202020202020000000fc
[ 4.990] (II) NOUVEAU(0): 006950313932410a0a0a0a0a0a0a0047
[ 4.991] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Output VGA-1 connected
[ 4.991] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 4.991] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
[ 4.991] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.991] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.992] (==) NOUVEAU(0): DPI set to (96, 96)
[ 4.992] (II) Loading sub module "fb"
[ 4.992] (II) LoadModule: "fb"
[ 4.992] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.023] (II) Module fb: vendor="X.Org Foundation"
[ 5.023] compiled for 1.14.1, module version = 1.0.0
[ 5.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.023] (II) Loading sub module "exa"
[ 5.023] (II) LoadModule: "exa"
[ 5.023] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.025] (II) Module exa: vendor="X.Org Foundation"
[ 5.026] compiled for 1.14.1, module version = 2.6.0
[ 5.026] ABI class: X.Org Video Driver, version 14.1
[ 5.026] (II) Loading sub module "shadowfb"
[ 5.026] (II) LoadModule: "shadowfb"
[ 5.026] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.029] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.029] compiled for 1.14.1, module version = 1.0.0
[ 5.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.029] (II) Loading sub module "dri"
[ 5.029] (II) LoadModule: "dri"
[ 5.029] (II) Module "dri" already built-in
[ 5.029] (II) NOUVEAU(G0): Loaded DRI module
[ 5.029] (--) NOUVEAU(G0): Chipset: "NVIDIA NVa8"
[ 5.029] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 5.029] (==) NOUVEAU(G0): RGB weight 888
[ 5.029] (==) NOUVEAU(G0): Default visual is TrueColor
[ 5.029] (==) NOUVEAU(G0): Using HW cursor
[ 5.029] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 5.029] (==) NOUVEAU(G0): Page flipping enabled
[ 5.029] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 5.060] (II) NOUVEAU(G0): Output DVI-I-1 has no monitor section
[ 5.068] (II) NOUVEAU(G0): Output HDMI-1 has no monitor section
[ 5.178] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
[ 5.189] (II) NOUVEAU(G0): EDID for output DVI-I-1
[ 5.196] (II) NOUVEAU(G0): EDID for output HDMI-1
[ 5.249] (II) NOUVEAU(G0): EDID for output VGA-2
[ 5.249] (II) NOUVEAU(G0): Manufacturer: DEL Model: a00c Serial#: 808793676
[ 5.249] (II) NOUVEAU(G0): Year: 2004 Week: 47
[ 5.249] (II) NOUVEAU(G0): EDID Version: 1.3
[ 5.249] (II) NOUVEAU(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 5.249] (II) NOUVEAU(G0): Sync: Separate
[ 5.249] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 5.249] (II) NOUVEAU(G0): Gamma: 2.20
[ 5.249] (II) NOUVEAU(G0): DPMS capabilities: Off; RGB/Color Display
[ 5.249] (II) NOUVEAU(G0): Default color space is primary color space
[ 5.249] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 5.249] (II) NOUVEAU(G0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
[ 5.249] (II) NOUVEAU(G0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
[ 5.249] (II) NOUVEAU(G0): Supported established timings:
[ 5.249] (II) NOUVEAU(G0): 720x400@70Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@60Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@72Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@75Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@56Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@60Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@72Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@75Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@60Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@70Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@75Hz
[ 5.249] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 5.249] (II) NOUVEAU(G0): Supported detailed timing:
[ 5.249] (II) NOUVEAU(G0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 5.249] (II) NOUVEAU(G0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 5.249] (II) NOUVEAU(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 5.249] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[ 5.249] (II) NOUVEAU(G0): Serial No: D82544BF056L
[ 5.249] (II) NOUVEAU(G0): Monitor name: DELL E153FP
[ 5.249] (II) NOUVEAU(G0): EDID (in hex):
[ 5.249] (II) NOUVEAU(G0): 00ffffffffffff0010ac0ca04c363530
[ 5.253] (II) NOUVEAU(G0): 2f0e0103681e17782eb060a1584f9526
[ 5.253] (II) NOUVEAU(G0): 165054afce0001010101010101010101
[ 5.253] (II) NOUVEAU(G0): 01010101010164190040410026301888
[ 5.253] (II) NOUVEAU(G0): 360030e410000018000000fd00384c1e
[ 5.253] (II) NOUVEAU(G0): 3f08000a202020202020000000ff0044
[ 5.253] (II) NOUVEAU(G0): 383235343442463035364c0a000000fc
[ 5.253] (II) NOUVEAU(G0): 0044454c4c204531353346500a200025
[ 5.253] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Output DVI-I-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output HDMI-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 connected
[ 5.253] (II) NOUVEAU(G0): Using exact sizes for initial modes
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
[ 5.253] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.253] (--) NOUVEAU(G0): Virtual size is 1440x900 (pitch 0)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 5.254] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.254] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 5.254] (II) Loading sub module "fb"
[ 5.254] (II) LoadModule: "fb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.254] (II) Module fb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "exa"
[ 5.254] (II) LoadModule: "exa"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.254] (II) Module exa: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 2.6.0
[ 5.254] ABI class: X.Org Video Driver, version 14.1
[ 5.254] (II) Loading sub module "shadowfb"
[ 5.254] (II) LoadModule: "shadowfb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.254] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) UnloadModule: "vesa"
[ 5.254] (II) Unloading vesa
[ 5.254] (--) Depth 24 pixmap format is 32 bpp
[ 5.255] (II) NOUVEAU(G0): Opened GPU channel 0
[ 5.261] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 5.261] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 5.261] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 5.266] (II) EXA(256): Driver allocated offscreen pixmaps
[ 5.266] (II) EXA(256): Driver registered support for the following operations:
[ 5.266] (II) Solid
[ 5.266] (II) Copy
[ 5.266] (II) Composite (RENDER acceleration)
[ 5.266] (II) UploadToScreen
[ 5.266] (II) DownloadFromScreen
[ 5.266] (==) NOUVEAU(G0): Backing store disabled
[ 5.266] (==) NOUVEAU(G0): Silken mouse enabled
[ 5.267] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.267] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 5.267] (==) NOUVEAU(G0): DPMS enabled
[ 5.267] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.269] (II) NOUVEAU(0): Opened GPU channel 0
[ 5.273] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.273] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.273] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.276] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.276] (II) EXA(0): Driver registered support for the following operations:
[ 5.276] (II) Solid
[ 5.277] (II) Copy
[ 5.277] (II) Composite (RENDER acceleration)
[ 5.277] (II) UploadToScreen
[ 5.277] (II) DownloadFromScreen
[ 5.277] (==) NOUVEAU(0): Backing store disabled
[ 5.277] (==) NOUVEAU(0): Silken mouse enabled
[ 5.277] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 5.277] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.277] (==) NOUVEAU(0): DPMS enabled
[ 5.277] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.277] (--) RandR disabled
[ 5.444] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.444] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.447] (II) AIGLX: Loaded and initialized nouveau
[ 5.447] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.456] (II) NOUVEAU(0): NVEnterVT is called.
[ 5.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 5.457] resize called 1440 900
[ 5.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.688] (II) LoadModule: "evdev"
[ 5.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.690] (II) Module evdev: vendor="X.Org Foundation"
[ 5.690] compiled for 1.14.0, module version = 2.8.0
[ 5.690] Module class: X.Org XInput Driver
[ 5.690] ABI class: X.Org XInput driver, version 19.1
[ 5.690] (II) Using input driver 'evdev' for 'Power Button'
[ 5.690] (**) Power Button: always reports core events
[ 5.690] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.690] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.690] (--) evdev: Power Button: Found keys
[ 5.690] (II) evdev: Power Button: Configuring as keyboard
[ 5.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.690] (**) Option "xkb_rules" "evdev"
[ 5.690] (**) Option "xkb_model" "evdev"
[ 5.690] (**) Option "xkb_layout" "us"
[ 5.771] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.771] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.771] (II) Using input driver 'evdev' for 'Power Button'
[ 5.771] (**) Power Button: always reports core events
[ 5.771] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.771] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.771] (--) evdev: Power Button: Found keys
[ 5.771] (II) evdev: Power Button: Configuring as keyboard
[ 5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.771] (**) Option "xkb_rules" "evdev"
[ 5.771] (**) Option "xkb_model" "evdev"
[ 5.771] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event2"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.772] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 5.772] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 8)
[ 5.772] (**) Option "xkb_rules" "evdev"
[ 5.772] (**) Option "xkb_model" "evdev"
[ 5.772] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event3)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event3"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found 1 mouse buttons
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found scroll wheel(s)
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found relative axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing relative x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found absolute axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing absolute x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as mouse
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Adding scrollwheel support
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: YAxisMapping: buttons 4 and 5
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3/event3"
[ 5.773] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
[ 5.773] (**) Option "xkb_rules" "evdev"
[ 5.773] (**) Option "xkb_model" "evdev"
[ 5.773] (**) Option "xkb_layout" "us"
[ 5.776] (II) evdev: Lite-On Technology Corp. USB Keyboard: initialized for relative axes.
[ 5.776] (WW) evdev: Lite-On Technology Corp. USB Keyboard: ignoring absolute axes.
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) keeping acceleration scheme 1
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration profile 0
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration factor: 2.000
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration threshold: 4
[ 5.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 5.777] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5.777] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 5.777] (**) USB Optical Mouse: always reports core events
[ 5.777] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 5.777] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d20
[ 5.777] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 5.777] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 5.777] (--) evdev: USB Optical Mouse: Found relative axes
[ 5.777] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 5.777] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 5.777] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 5.777] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5.777] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4/event4"
[ 5.777] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 5.777] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 5.778] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5.778] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 5.778] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5.778] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 5.778] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5.778] (II) No input driver specified, ignoring this device.
[ 5.778] (II) This device may have been added with another device file.
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.779] (II) No input driver specified, ignoring this device.
[ 5.779] (II) This device may have been added with another device file.
[ 7.250] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 7.250] (II) No input driver specified, ignoring this device.
[ 7.250] (II) This device may have been added with another device file.
[ 7.252] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 7.252] (II) No input driver specified, ignoring this device.
[ 7.252] (II) This device may have been added with another device file.
[ 7.254] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
[ 7.254] (II) No input driver specified, ignoring this device.
[ 7.254] (II) This device may have been added with another device file.
[ 7.256] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 7.256] (II) No input driver specified, ignoring this device.
[ 7.256] (II) This device may have been added with another device file.
[ 7.258] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event10)
[ 7.258] (II) No input driver specified, ignoring this device.
[ 7.258] (II) This device may have been added with another device file.
[ 7.260] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event11)
[ 7.260] (II) No input driver specified, ignoring this device.
[ 7.260] (II) This device may have been added with another device file.
[ 7.270] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 7.270] (II) No input driver specified, ignoring this device.
[ 7.270] (II) This device may have been added with another device file.
[ 7.272] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.289] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.289] (II) No input driver specified, ignoring this device.
[ 7.289] (II) This device may have been added with another device file.
[ 16.144] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.144] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 16.144] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 16.144] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.979] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.979] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.979] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.979] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.982] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.984] resize called 1440 900

How can i allocate more RAM for my onboard video card on a 2011 macbook pro 13 inch running windows 7 via bootcamp

I noticed that since Macbooks.. macs in general use an EFI instead of BIOS. . .. Now i need to allocate some more RAM for the onboard video card since its currently running with an estimated 50mb.. I would like to increase this to 512 and cut the 3.95 down to 3.5 MB for the rest of the system ( allowing me to run more graphic intensive games and the such ... ) I know this could slow down the entire system.. ( i am aware of this ) and have gotten a 3rd party application to control and close out uneeded processes during gaming.. I just need more ram for my onboard video card.. Any help?

You don't allocate more RAM towards your video card, you put more RAM into the machine and hopefully some machines will bump the CPU graphics RAM allocation up a little.
The problem is you bought a integrated only graphics computer, if you want to 3D game you need a dedicated graphics computer with it's own or dedicated VRAM.
If your this serious about 3D gaming, your on the wrong platform.
Get a Windows 7 64bit i7 8GB RAM expandable 3D gaming tower with a good power supply and video card upgrade path, this way every few years you buy and stick in a new video card to play the latest games.
Mac's are not gaming machines and never will be because they would last too long if we could upgrade them.
http://www.cbscores.com/index.php?sort=ogl&order=desc

Z87 G45 Onboard Video

Hi.
Recently I got a system with z87 g45 mainboard, xfx r9 290 graphics card.
When enabling onboard video, and installing VirtuMVP everything seemed fine.
Played a few games and noticed it was giving more of a performance hit then boosting it.
Updated drivers, still the same. Plugged in other monitor to onboard to see if it was working and second desktop displayed fine.
Restarted, checked bios, unplugged second monitor. And then VirtuMVP failed to load, saying gpu not configured.
Rebooted few times, checked device manager, everything looked fine. Plugged in other monitor 'no signal'
tried disabling, uninstalling drivers. redoing. yet still getting 'no signal' when I go to check it (and VirtuMVP won't load)
Even tried monitor that is plugged into r9 290. Nothing on either DVI or HDMI. Just no signal (tho it detects that it's plugged in)
Updated bios. No vga drivers listed in live update, any idea why this is happening?
B

Well it's still playing a subtle level through the fronts, it's tolerable for most music, but you can play anything like dubstep or anything with heavy bass, hopefully they will find a fix for this.

K8NGM2-FID onboard video won't go to DVI in XP

System is:
K8NGM2-FID
BIOS 3.4
Onboard video using 128 MB memory off motherboard
Athlon 64 x2 3800+
2 GB (2 x 1GB) RAM Patriot PDC2G3200LLK 2-3-2-5
Case Antec Sonata II w/PSU Antec Smartpower 2.0 450W dual 12V (15A/17A)
HDD Seagate ST316012A Barracuda 7200.9 160 GB
OS WinXP SP2 auto updated
This system has run 24/7 for about 5 months using onboard video driving a Samsung SyncMaster 940t thru the onboard DVI port.
I am using the DVI (digital) onboard video output to drive my monitor. Recently I have experienced blank screens when waking up from monitor power down (20 minute w/o activity - no screensaver, just auto power down). When I connect a VGA (analog) cable from the onboard connector to the monitor's analog input the video is there but not present on DVI (digital) output of board. Otherwise the machine is still completely functional, just no DVI video output.
Rebooting, the video signal is present on BOTH connectors (DVI and VGA) up to the point when Windows loads the desktop (i.e., past Windows boot screens), then it switches to VGA ONLY.
If I power down and wait 3-4 hours, the DVI will continue to work after Windows loads the desktop, then will not return after the monitor powers down due to inactivity (20 minutes, set in properties - screen saver) OR a warm reboot OR a power cycle. Switching to the VGA (analog) output, the video is still there and system is running as before, but with analog video only, no DVI (digital). This occurs with two other monitors that have dual inputs (HP and Viewsonic).
Video drivers are from MSI and are the current Version 8205 - (8.2.0.5 on device manager screen) but BIOS is 3.4. BIOS update 3.4->3.5->3.6 notes do not mention any DVI issues so I am hesitant to flash to 3.6 (current version) as I do not think it will fix the problem.
Bringing up nVidia Nview desktop manager, it 'sees' the monitor but there is no mention of DVI or VGA interface or way to switch between them. If I hook up a TV to the Svideo output it 'sees' that as well as the monitor and I can switch between them.
Does anyone know of a way to explicitly direct signal to either of the onboard video connectors (DVI and VGA) connector on this board (K8NGM2-FID)?
Any other ideas?
Thanks in advance,
ss

I fixed the system.
However, I still don't know the root cause of the original problem.
The missing piece of the fix was doing an uninstall of the video device drivers using the Control Panel 'Add or Remove Programs' function. Prior to that I was just updating things using either the package's native installers or the Device Manager Update Driver function.
After the uninstall I did a clean install of the MSI drivers off a CD and now have selectable digital and/or analog displays in Windows XP. Also, the nvidia drivers DO work, provided they are installed on a 'clean' suystem (thanks, Stu). Installing either driver set as an update results in unstable output - sometimes digital, sometimes analog.
Moral of the story: clean up toothpaste before squeezing the tube again.
ss

How to disable onboard video on KM4M-L?

Does anybody know how to disable the onboard video card of the KM4M-L? I tried just plugging in another AGP card, but it doesn't work. I've gone through the bios, but can't find any reference to the onbard video.
Another question I have is which card is faster, the onboard video or my old Viper V770 with 32MBs of ram (I know, it's ancient!)
Thanks in advance for your help.

The viper but not by much. The o/b AGP is disabled automaticly but your problem is your board only supports AGPx4/1.5v cards.
Have a read through this thread (it's a P4 board but the same applies).

Dc5850 Quad monitors: Onboard Video + Video Card

I have a HP dc5850 AMD Minitower and would like to hook up 4 monitors.
I read here on the hp site that you can utilize both onboard video (Dual DVI) and use an additional Video Graphics Card (Dual DVI) to support a total of 4 monitors (2 from onboard dual DVI and 2 from dual dvi from the Graphics card) by enabling the SurroundView in F10 setup.
HP lists these ATI cards:
ATI Radeon X1300 Pro (256 MB DH) PCIe Graphics Card -AH050AA (total of four displays along with on-board)
ATI Radeon HD 2400XT (256 MB DH) PCIe Graphics Card -KD060AA (total of four displays along with on-board)
ATI Radeon HD 3650 (512 MB DH) PCIe x16 Graphics Card -KS505AA (total of four displays along with on-board)
Am I limited to these cards or can I use a more current "ATI" dual DVI PCI-e x16 card work with the onboard video?
This question was solved.
View Solution.

Hi,
Be careful with the newer AMD graphics cards as they make not work in your PC. Know what the return policy is before you buy.
I typically like to suggest the older NVIDIA cards with some exceptions as they have been shown to provide better compatibility with older PCs. However, the older NVIDIA cards will only support two monitors. Some of the older AMD cards have backwards compatibility issues in some of the HP PCs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

DirectX problems - Onboard video problems? K9VGM-V

I am having problems with loading the new Nero suite (7.xx) version. It keeps coming back with a DirectX error. The guys at Ahead are telling the same thing.
My question is: Can I use DirectX 9.0c using the onboard video? I don't know what bios I have yet.
PCTools 2000 tells me I have DirectX9.0c installed and is okay.

Thanks for the ideas. I have already done the Directx diagnostics. That didn't change anything.
when I try to run the Directx diag I get this error. "The procedure entry point could not be located in the dynamic link library GDI32.dll"
In fact, that dll (GDI32.dll) doesn't even show up in the list of directx files in the diagnostics window.
I have tried to load a different version of the dll but I can't since it's in use by windows.
The guys from Nero have told me that it's my video drivers incompatibility with with my video drivers. They have a program that copies a whole heck of a lot of details from my computer and creates logs.
I have since done the online upgrade of my video drivers from MSI. It still doesn't work.
I am noticing that I could not load Diskeeper either. It comes up with some error, too.
This has been very frustrating.
Thanks in advance, Ray.
Reloading windows is such a pain.

K8D master ft onboard video problem

Hi, I have the k8d master ft and when I install a pci vid card the onboard video is disabled. Does anyone know how or even if it is possible to run both? I could not find anything in bios but maybe I missed it.
thanks.

Sorry, you can't....this happens on all boards that I have seen.

Disable onboard Video

I have a onboard GeForce 6150SE, nForce 430, I want to change to GeForce 8400, My computer won't detect the new card, I changed bios to 16X and still won't find it, how do I disable onboard card and what do I need to change for the new one to load?- Do I need to change legacy boot?

I finally fixed it. After flashing back to the newest bios, I did a hard CMOS clear and booted with just the mouse and keyboard plugged in to the top USB plugs (no LAN or audio hooked up) and it allowed me to disable it finally.
Every motherboard can disable onboard video... Just because it is part of the 790GX chipset doesn't mean it can't be disabled. There is some sort of bug I don't even know how to reproduce for this motherboard.
edit: after saving and restarting it took away the disabled option and only went back to UMA or UMA+Sideport. MSI engineers and/or bios team fails hard. This is the only board I've ever seen act this stupid.

How to disable onboard video chip (ms6337)

Hi all.
My mainboard is MS6337(815Epro , bios version:1.4)
I've bought a new videocard ,so I want to disable the onboard video chip.
Thanks for any help .

I don't really have anything to compare with :(
I would need another i815E board to see if there is supposed to be a change at all.
My guess is that since there is no 3D engine in the integrated VGA core you need very little memory bandwidth to run it:
1024*768 @ 85 FPS 24bit = 1024*768*85*4=255MB/S
The RAM is capable of 1066MB/S, but the PIII CPU never uses that anyway so there is no bandwidth conflict between the CPU and VGA.

Km4mv onboard video disable

When using an AGP graphics card with a KM4MV mainboard is there some way that the onboard video should be disabled?
I have had a look in the bios but can't see anything obvious.

^^ what he says. onboard video shares the same bus as the AGP slot, so as soon as you plug in an AGP card, the onboard is disabled

AGP4X onboard video

Maybe a newby question.
When I boot up, I can see the logo screen that says "8x". In BIOS, I selected 8x for AGP. So, why the f*** nvidia tools tell me I have a 4x video card?
I'm using onboard video and audio.

C'mon XP supports 8x, I'm willing to bet the 2X is simply some bit of software that is out dated, and can only recognize 2x. It is probably making an old call to a deprecated library. With all of the reviews out there on video cards, don't you think one of them would have said something, or screamed something, about the lack of 'true' 8X AGP support by XP?

2012 macbook pro retina display artifacts on screen when using onboard video

2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?

artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus.

Km2m onboard video

Similar Messages

Maybe you are looking for