Known Issue: Cannot use SocialInfoContract types even after adding the Mobile Extension SDK to my project.

The Mobile Extension SDK is referring to
Windows.ApplicationModel.SocialInfo.SocialInfoContract, but the contract is currently in the wrong location.

Work around:
From an administrative command prompt, rename the contract folder:
On X64 bit machines type:
Ren “C:\Program Files (x86)\Windows Kits\10\References\
Windows.Phone.StartScreen.SOCIALRTContract” “Windows.ApplicationModel.SocialInfo.SocialInfoContract”
On X86 bit machines type:
Ren “C:\Program Files\Windows Kits\10\References\
Windows.Phone.StartScreen.SOCIALRTContract” “Windows.ApplicationModel.SocialInfo.SocialInfoContract”

Similar Messages

  • Even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold

    even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold  eddition.

    Hi, Thilina66.  You say you have entered the country code but still cannot make international calls.  I suppose you are adding the international access code before the country code.  This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
    For example, to call a number in the UK from the US you have to dial:
    011 44 7540 267898
    or
    +44 7540 267898
    To call a number in the US from the UK you have to dial:
    00 1 212 456 1470
    or
    +1 212 456 1470
    Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard.

  • My iPad Air stalled during an update and I cannot restart my device even after pressing the on/off button for 15 seconds. Any suggestions?

    My iPad Air stalled during an update and will not restart even after pressing the on/off button for 15 seconds. Any suggestions?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.

  • What problems or issues do i have if even after all the steps i took to fix my problem with the ipod classic and even after i restore it it fails to be recognized by itunes

    even after i restore my ipod it fails to be recognized on my itunes and doenst allow me to format it. been through all the trouble shooting steps and disk mode an still wont work properly plz help someone

    I need my phone not only because it it my alarm clock in the morning, but because i use it excessively at work. PLEASE HELP !

  • Loaded Elements 10 onto my new computer but cannot use photo email.  After composing the email I get message that says unable to complete.  I used photo email many tmes on old computer.  Any suggestions?

    I loaded Elements 10 onto my new computer but cannot use photo email.  I get a message saying "unable to complete"  Any suggestions?

    Unfortunately, Starter Edition 3.2 has been discontinued for some time now; an alternative option (which is free) could be google Picasa; check that one out to see if it might work for you.
    Photoshop Elements replaced Starter Edition, and comes with a sophisticated organizer that essentially does what Starter Edition did; download the tryout and use it for 30 days for free to see if it does what you want it to.
    -Mark

  • Firefox always says using old version even after running the upgrade programme. Even after uninstalling & reinstalling? Why?

    Every time I open Firefox the message "using old version" appears I have tried uninstalling the program and then reinstalling but no change, When I use Firefox as my browser a message appears to say you are using an old version of Firefox. This is just fustrating what can I do to correct?

    Try resetting your User Agent:
    *[https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
    *[http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default Resetting your useragent string to its compiled-in default (Mozillazine)]
    *What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • I cant load adobe flashplayer even after adding the website to the add

    I have followed the adobe instruction for firefox users, and it still won't load the flashplayer

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
    You can find the links to download the Flash plugin for Windows at the bottom of this page:
    Adobe - Common Flash Player download and installation issues (Windows): http://www.adobe.com/products/flashplayer/support/index.html
    Go to: 3. Download Adobe Flash Player : Flash_Player_10_Plugin (All other Windows browsers)
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Cannot use connection type (Blooth Connection-Phon...

    When i launch nokia PC suit and click on "GET CONNECTED" Button.
    1. Welcome message appears.
    2. I click "Next" button
    3. I select the connection type as "Blue tooth Connection"
    4. click "next" button
    I get following error msg:
    Cannot use connection type. Check all the needed hardware, software and drivers are available.
    Note: I am able to transfer files & pictures from my mobile phome to PC & vice-versa through IVT BlueSoleil.
    Please provide a solution.
    Below is my PC Config
    OS: Winsows XP Professional-SP2
    Nokia PC Suite: Version 6.81.13.0, Language: English
    Blue Tooth Device: IVT BlueSoleil
    Bluetooth stack: Microsoft Bluetooth stack, Version 5.1.2600.2180

    Thanks Manta for your post. The problem is fixed now.
    I followed the instructions given by DOOMsDAY at below link.
    http://www.allaboutsymbian.com/archive/t-42191.html
    1. Uninstall Nokia PC Suite (whichever version you have).
    2 Download Nokia PC Cleaner and the latest version of PC Suite from the Nokia site
    3. Unless you have BlueSoleil 1.6.1.4 installed, uninstall BlueSoleil.
    4 Get the required version of BlueSoleil i.e. 1.6.1.4. (You can get it from http://www.abe-hk.com/english/support/drivers/BlueSoleil%201.6.1.4.zip)
    5 Install BS 1.6.1.4 and pair up your phone. Authorise from the phone and from BS.
    6 Run Nokia PC Cleaner and take the "Other" option to clean out all remaining files and registry entries.
    7 Install PC Suite with your phone and PC connected.
    8 Use the "Get Connected" function and choose Bluetooth and you should be connected up in a few seconds
    Regards
    Sharath Kumar.

  • Can anyone help me, I am trying to create courses using Captivate for Udemy, but even after saving the courses as pdf files, Udemy will not reconize them. NOw I am back to square one because according to Udemy techs, they do not support Captivate files.

    Trying to create my courses using Adobe Captivate, but even after saving the files as a pdf it will not upload in Udemy. What can I do?

    Yep, you lose all interactivity when publishing to video.
    Udemy, Lynda.com, Total Training and other similar models are based on simple "watch the video to learn" type of consumption. The only real interactivity you get is an ability to pause, rewind, fast forward. Basically anything you can do with a video.
    Cheers... Rick

  • I cannot log in my account but can as a guest even after removing the password

    i cannot log in my account but can as a guest even after removing the password

    Hi Kabiru,
    Thanks for visiting Apple Support Communities.
    You may want to use the steps in this article to reset your user account password:
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/HT1274
    Best,
    Jeremy

  • Help! I have been using Mountain Lion but Finder and the App Store won't load and keeps crashing even after reinstalling the OS. How do to fix it?

    Help please! I have been using Mountain Lion for a few weeks but Finder, System Prefferences and the App Store won't load and/or keep crashing even after reinstalling the OS. How do to fix it?
    Model Identifier:     MacBookPro8,1
    Processor Name:     Intel Core i7
    Processor Speed:     2.7 GHz
    Number of Processors:     1
    Total Number of Cores:     2
    L2 Cache (per Core):     256 KB
    L3 Cache:     4 MB
    Memory:     8 GB
    Boot ROM Version:     MBP81.0047.B27
    SMC Version (system):     1.68f99

    You need to check to make sure you are actually connected to the network.  Tap Settings > WiFi >and then tap the blue ">" next to the network name with checkmark.  You should see a complete set of IP address but if the router didn't issue you an IP address properly, you will see your touch IP address start with 169.x.  If this is the case, you are connected to the internal network but not to the web.
    First thing to do (while you are on that screen) is tap "Forget Network".  Then turn WiFi off.  Turn it back on and, if needed, tap Other and re-enter your network information.  If you continue to have problems, check with your IT department on Monday.
    In the meantime, your laptop and iTunes can be used to purchase apps and music.  Syncing them with your touch is a great way to get them installed while you are waiting for the answer on your WiFi problem.

  • Is there a known issue for using IE11 when using business catalyst cms

    Is there a known issue for using IE11 when using business catalyst cms?  I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

    I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
    Regards.

  • Why I cannot use SIRI in Japanese after updated to ios 5.1?

    Why I cannot use SIRI in Japanese after updated to ios 5.1?
    I can see the language is there but it doesnt work

    Check your settings to make sure Siri is actually enabled.  Sometimes I find that Siri will disable during the updating process.  Oh, and it should be iOS 6.0 not 6.1.  6.1 doesn't exist...yet.

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • I recently clicked on erase all data and now i can't use my phone even after restoring

    i recently clicked on erase all data and now i can't use my phone even after restoring

    Try here...   iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Report for Late Sales Order Processing

    Hello all, business want to have a report the shows if sales order are late for processing. Something similar to VL10H for delivery but based on the customer requested delivery date instead of the confirm delivery date in VL10H. Some report that woul

  • Mac Mini & Mac Mini Server

    Hi I would like to know the "suitability" of Mac Mini or Mac Mini Server for web hosting (multiple domain/site) purpose. Some basic assumptions include : budget less than USD$5, user base / concurrent access less than 500, hosted at data centre with

  • Security deposit # in INTCASHDEP EMIGALL Object

    Is there a way to reference the Security Deposit number in the EMIGALL Object INTCASHDEP so the migrated Interest indicates the Security Deposit number upon being migrated? INTCASHDEP uses the KSM link to the Security Object but is it required that t

  • Media Sync 3.0 does not recognized my device

    I have a Blackberry 8330 with a media card installed, 4GB. I started my Blackberry Desktop and allowed it to update to the latest version, 5.01. I have used the Media sync in the past but not in a long time. When I started the Media sync it asked to

  • Nikon D80 RAW NEF files

    Hi Wonder if any of you can help. Are they any updates that enable the D80 raw files to work with 10.2.8. like there are for 10.4? Cheers emac   Mac OS X (10.2.x)