Known issues with CUDA 5.0.17 and 5.0.24 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

You are experiencing a page fault (reference to an area outside of what is owned by the software in question) in the AirPort driver, in a Mac OS X kernel that does not have obvious third-party modifications to it.
This should not be happening. Your Mac OS X image may be Bad.
If you do not already have a Trusted Backup, that should be your Top Priority.
If this is a new MacBook, and it is within the first 90 days of ownership, contact telephone support and ask them to help you. They will likely suggest a re-Install, right over the Mac OS X you have in place now. This is intended to do no damage, but you should always have a Backup.

Similar Messages

Known issues with CUDA 5.0.17 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

Are there any known issues with speed between excel 2003 and 2010 when using WAAS?

Request asked by customer. Thought I would run this by the forum first.
Can you please raise a ticket with Cisco TAC asking why Excel files in 97-2003 file format cannot be fully optimized when compared to the same file being saved in the latest file format?
When using the latest file format, the user experience is amazing and up to 100x faster to open and save files. Our testing has identified an issue with the older file format.

I deployed WAAS about 3 years ago. Part of the deployment was before and after testing. When the users used Office 2010 the results were good. When they used Office 2003 the results were terrible. Some files took minutes to open, some never opened. Solution was to upgrade to O2010.
Hope this helps.

Problems with MacMini 2.1 restarting and kernel panic

For the past few weeks I have been having a very frustrating problem.
Occasionally, when my MacMini goes into sleep mode I am unable to wake it and it must be hard restarted (holding down power button). When it restarts I get the startup chime, immediately followed by truncated echos of the chime (not beeps or tones), which can repeat every couple of seconds for up to five minutes. This is followed by the computer restarting itself over and over again until I get a kernel panic (log attached below). Once I restart after getting the kernel panic the computer usually starts up fine and is fully usable until the next time I can't wake it up from sleep mode.
Any help would be greatly appreciated. Thanks
Log Information
Sat Jul 9 18:06:29 2011
Machine-check capabilities (cpu 1) 0x0000000000000806:
family: 6 model: 15 stepping: 6 microcode: 199
Intel(R) Core(TM)2 CPU         T7200 @ 2.00GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0xf200004000000800 valid
MCA error code:            0x0800
Model specific error code: 0x0000
Other information:         0x00000040
Threshold-based status:    No tracking
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
   Error overflow
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
IA32_MC5_STATUS(0x415): 0xf200241010040400 valid
MCA error code:            0x0400
Model specific error code: 0x1004
Other information:         0x00002410
Threshold-based status:    No tracking
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
   Error overflow
panic(cpu 1 caller 0x2aaf41): Machine Check at 0x00fc1ab2, thread:0x5b90000, trapno:0x12, err:0x0,registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x05b7d000, EBX: 0x00000001, ECX: 0x00000020, EDX: 0x00002090
ESP: 0x3f56bdc8, EBP: 0x3f56bdc8, ESI: 0x00000010, EDI: 0x05b7d000
EFL: 0x00010206, EIP: 0x00fc1ab2
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x399cafb8 : 0x21b837 (0x5dd7fc 0x399cafec 0x223ce1 0x0)
0x399cb008 : 0x2aaf41 (0x59dfe4 0x59e0d1 0xfc1ab2 0x5b90000)
0x399cb0f8 : 0x2a29f2 (0x1 0x0 0x0 0x0)
0x3f56bdc8 : 0xfbdc28 (0x5b7d000 0x10 0x3f56be08 0xfbd864)
0x3f56be08 : 0xfbd90a (0x5b7d000 0x3f56be5c 0x1 0x2)
0x3f56be78 : 0xe6441b (0x5b7d000 0x0 0x3f56be98 0x2a45c9)
0x3f56bef8 : 0xe6475e (0x5b7d000 0xe7986c 0x3f56bf28 0xe5c3f5)
0x3f56bf28 : 0x5571d5 (0x5b7d000 0x5bf4380 0x3f56bf58 0x2a0577)
0x3f56bf78 : 0x230235 (0x5bf4380 0x5baa096 0x3f56bfc8 0x227cea)
0x3f56bfc8 : 0x2a179c (0x863ea0 0x0 0x2a17ab 0x5b10b7c)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.driver.AppleUSBUHCI(4.2.0)@0xfbb000->0xfcafff
            dependency: com.apple.iokit.IOUSBFamily(4.2.4)@0xe44000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
         com.apple.iokit.IOUSBFamily(4.2.4)@0xe44000->0xe79fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: Macmini2,1 (Mac-F4208EAA)
System uptime in nanoseconds: 10595195099
unloaded kexts:
(none)
loaded kexts:
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.12
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.XsanFilter          402.1 - last loaded 2821720238
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0

Hello,
This is EXACTLY what my MacBook Pro keeps doing. Have you figured out what the problem is? I recently to my Mac to the Apple store to address the issue, and the one thing they were able to tell me, was that the battery was bad. They couldn't say if the two were related, because I didn't have the error message at that time, but it seems like the two could be related. I would have them check your battery, it could be the reason why the computer goes to sleep and doesn't turn back on. I am able to use mine just fine, other than this problem, but was told that I need to have the battery replaced. Would love to se what you find out, or have found out, maybe it can help me solve the problem on my end as well (if not due to the battery...)
Tahnks!
S.R.Hughes

Problem with Photoshop CS5. Memory and Hard disk space Mac OSX

Just got CS5 Master Suite. Whenever I open photoshop it takes a ton of memory 1 gig +. When I open files it takes up more and more until it takes up all my memory and hard disk space. I open a simple multi layered file that is 25 megs in size to work on it. Before I know it photoshop is taking 20gigs+ of my hard disk space along with 3+ gigs of system memory. Is there a memory problem in photoshop cs5?
Thanks!
Joseph
UPDATE:
So I just opened the 25 meg file in photoshop cs5 and watched my free space on my hard drive go down 8 gigs the instant I opened it. It went from 27 gigs of freespace to 19 instantly. As I open more files and close others it works till my harddrive goes to zero space... stalls the computer big time. Only way to correct it is to quit photoshop cs5 and wait a few minutes for the space to return... and it takes a few minutes for it all to return.
I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
anyone else having simular problems?

http://forums.adobe.com/thread/681490?tstart=0
Maybe this thread offers some information.
And have you perused this page?
http://kb2.adobe.com/cps/404/kb404440.html

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Known Issues with Session Vars and non-IE browsers?

Are there any known issues with non-Internet Explorer
browsers storing or reading session variables. Or loops and
ListGetAt functions? I'm using CF 5.
The code works fine in IE, but not in FireFox or Netscape.
Thanks,
Josh

This testing will not really address any cross domain issues, due to the content being hosted by ScormCloud.
What I found interesting, is that in ScormCloud, using the links below, my results were opposite those that I obtained through my LMS.
In LMS, Captivate 5 worked, Captivate 6 did not in IE8, both worked in FF
In ScormCloud, Captivate 5 did not work in IE8, but worked in FF, and Captivate 6 did work in FF and IE8.
Here are the links:
captivate 5 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=3c04f298-d0db-4d10-ab6 3-80b9aaf2890b
captivate 6 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=e2b05753-2f03-421a-87d 9-62b92ad199af
Thanks for your attention, every bit of information that I can get will help.
Thanks,
SL

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Any known issues with Essbase 64 bit and other components as 32 bit

Hi Everyone,
Are there any known issues with 64 bit Essbase and other components (Planning, EAS, Provider services, EAS, Workspace and Reporting) in 32 bit?
Version is EPM 11.1.1.3
The reason for choosing ESSBASE 64 bit is of course performance. We decided to stick to 32 bit for the web applications due to some known issues and bitter experiences in past in this version with 64 bit web deployments.
OS is Windows 2003 Server (64 bit for the ESSBASE server and 32/64 bit for the application server)
Thanks,
Sayantan

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

I have a mac book pro mid 2011 and it overheats is there any known issue with this model

overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this model

Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton

Thinkpad X1 Mouse Issues with USB 3.0 Dock and WIndows 8.1

I have a new X1 (3444-CUU) that I recently upgraded to Windows 8.1. When I connected to the Thinkpad USB 3.0 Dock, there was an automatic updated of the firmware on the docking station.
Everything seems to be working except issues with my Keyboard and Mouse.Periodically, the mouse will disappear of the keyboard will simply stop working. Most recently, it was as if the delete key was stuck causing it to delete all my email (actually a feature I liked but unfortunately, can't allow).
Is there a known issue with wireless keyboard?

I have a possibly similar issue that seems to be related to the keyboard dock. In my case this is with logitec unified receiver, but what I found may help you narrow the issue's root cause.
I found that after a reboot, the dock's USB ports (bothh SS or USB 3.0) will not recognize logitech's unified receiver. Even though it is Windows reporting it, it seems to be related to the hardware. What I do to have minimally invasive 'functioning' system is to undock the Helix (use as tablet). This makes the genuine USB 2.0 port of the tablet accessible. I then plug the receiver into that port and wait until the mouse is recognized. Then remove the receiver, re-dock the tablet on the keyboard dock and plug the receiver into the dock's usb 3.0 port. Then everything works.
That seems to somehow circumvent part of the refreshing of the USB connected devices and allows them to work correctly.
I wonder if that addresses your issue. Of course I am opening another thread and ticket with that issue (will post a link after that)

Nokia 6500 on 3 - known issue with signal recepti...

Does anyone know if Nokia and 3 have yet developed a fix for the known issue with 3 reception on the 6500?
I just spent close to two hours talking to 3 about this. We got a 6500 "upgrade" from 3 and have discovered that the phone doesnt work anywhere around our home, or the locality of our home. We have reverted to a 4 year old 6680 from the back of our wardrobe which will show 4 bars of signal when the brand new 6500 shows no signal at all.
3 advised that very poor ability to get a signal is a known issue with this phone, however as we did not report it to 3 within the 14 day period they expect us to stay out the contract or pay a near £400 termination fee. (or take a much inferior phone which is "the only model we are authorised to offer as a replacement"). (The reason we didnt report it was that as we had been happy with our existing model we didnt swap the sim card over straight away. When we did discover it we tried 3's suggestion of upgrading the firmware (the phone arrived with a 2007 version) but this did nothing to help.
What really bugs me is that 3 contacted us in September and spent close to an hour an the phone persuading us to upgrade to the 6500. That's five months at least after it was a known issue and being worked on by Nokia and 3. (There are posts within this Support Forum discussing the issue that go back to April at least.)
I will be reporting 3 to trading standards but am curious as to what progress has been made (if any) on sorting this issue out?
I also thought it may be useful for others to be aware of as it will allow them to make a more informed decision about the phone, and about 3's attitude to their customers. We have been with them for over 5 years.
At one point, when I told the manager/supervisor that I had become aware of the fact that it was an issue that was well-known 5 months before 3 persuaded us to upgrade, he suggested that it was out fault for not researching the web and forums well enough, and that I should have discovered this before agreeing to take the phone.
Amazing.
Be warned!!!!!
Stormy

Hi all - sorry I stopped monitoring the thread in the run up to christmas but thanks for your replies.
shumboy, redroxy, roslily, ginger25
very sorry to hear you are all experiencing the same problems and that 3 are as unhelpful with you as they were with us. my guess is that the problem with this phone is so widespread that they would let themselves open to too much cost if they started actually doing the right thing and replcing them like for like. I also think the suggesiton that the only way out of a contract is to pay out £260+ (£300 in our case) after it was their own promises of what a good phone it is, despite the fact that this significnt problem has been known about for months, that persuaded people to take the contract is tantamount to fraud and that certainly trading standrads should be informed.
gaz_level2 - thanks for the information you gave which confirms that there are known issues with H3G signals and the 6500 especially. I didnt understand some of the detail as I am not technical but I hope others seeing this post may get the info they need to make an informed decision should 3 continue with their despicable practice of enticing people into signing up based on what a great phone this is.
wafush - if you are considering 3 : NO NO NO
Ben - you are lucky to have a 6500 that is working (based on replies to this thread and on other boards) and you are right that people dont start threads complimenting phones. I started this one for two reasons: a) to see if/how-many others had the same problem and b) inform people about it and what help they could expect from 3 when the problem does occur
Steve/Hamraam - we seem to be in a ridiculous situation where the newest phones are actually less good at making and receving phone calls than phones of 5-6 years ago! They're brilliant for taking photos, browsing the web, playing MP3's. But for simple phone calls... ? And dont get me started on battery life! My old 6310 can last two weeks if I switch it off overnight. Most of the new phones require re-charging at least every other day and if you use push email make that once per day minimum.

Any known issues with SQL DB Link Synonyms joining on encrypted columns

Are there any known issues with accessing encrypted columns via a database link that is masked by a synonym?
We are experiencing unexpected results when the encrypted column is anti-joined through a not exists, to a local encrypted column of the same datatype The encrypted columns are person ids. If the expected person id is hard coded, the results return correctly. The local database is 10.2.0.4.0 and the link is to a 10.2.0.3.0 RAC.
Both enrollments and person_ids, below, are synonyms to the linked tables.
... From table_1 d
where ...
AND NOT EXISTS (SELECT 1
FROM enrollments x,
person_ids p
WHERE x.person_demo = p.person_demo
AND x.rept_inst = d.rept_inst
AND x.demo_time_frame = d.term_deg_grant
AND p.person_id_encrypted = '999999999')
vs.
... From table_1 d
where ...
AND NOT EXISTS (SELECT 1
FROM enrollments x,
person_ids p
WHERE x.person_demo = p.person_demo
AND x.rept_inst = d.rept_inst
AND x.demo_time_frame = d.term_deg_grant
AND p.person_id_encrypted = d.person_id_encrypted)

milazzo74 wrote:
I am having the same problem...
http://www.milazzo.com.br/teste/projetos.php
It works fine in Firefox but loads forever in explorer 8...
The cause of the problem is not the same.
In your case it takes forever to load the thumbnails from flickr.com; the SpryDataSets without the loading of the thumbnails works as expected.
Remember that ALL of the thumbnails for each 60 odd projects are downloaded from flickr, that is about 1800 thumbnails.
Gramps

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

Known issues with Citrix Xen App 6.5

Are there any known issues with Citrix Xen App 6.5 and Adobe Reader 10.1.1?

As per the administration guide, http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
Citrix XenApp 5.0 and 6.0 are supported on 10.x products. As per my deployment tests, they work as expected.
But am not sure of XenApp 6.5 with 10.0 products, though it should work but I have not tried them.
In order to avoid any issue, we should stick with the correct prerequisites.

Known issues with CUDA 5.0.17 and 5.0.24 driver (including crashes and kernel panics) on Mac OSX

Similar Messages

Maybe you are looking for