KP26 version 0 lock for fiscal year 2010

why i cannot update KP26 using version 0? but when i using version 1 its ok ?
now my fiscal year  is 2010, and period 3.
the error shows - version 0 is block for fiscal year 2010. where i should check and change?

Hi,
check this link.
link:[Re: Activity type problem;
hope it'll give some idea.
Regards,
Sneha.

Similar Messages

  • "CO-OM version is not assigned to a receiver version CO-PA for fiscal year

    Hello, I would like to ask where I can customize the following message when using transaction KEUB.
    The message says:
    "CO-OM version in controlling area XY is not assigned to  a receiver version CO-PA for fiscal year 2010"
    thanks in advance where I can customize
    regards
    Hana

    HI,
    thats IMG-path Controlling / general controlling / Organization / Maintain versions. In the Controlling area settings for eacvh fiscal year you can assign a Profitability analysis version.
    best regards, Christian

  • Job gets cancelled - Plan version cannot be planned for fiscal year

    hello,
    In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
    Does anyone know what I should do to resolve it.
    thanks,
    Bhat

    Hello,
    Thanks for your response.
    I have checked OKEQ and
    we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
    thanks,
    Bhat

  • FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54

    Hi all,
    I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
    [Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
    Diagnosis:
    Posting for the document of value type 54was attempted on a date that has not been opened in FM.
    Procedure:
    To define open item intervals for FM postings, use the following transactions:
    Individual Maintenance of Open Time Intervals
    Mass Maintenance of Open Time Intervals]
    I have already maintained in transaction FMIR.
    The entry is:-
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    What else do you think could be causing this error?
    Regards,
    Bernard

    Go tcode FMIR.
    Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9A Payment Budget/2010//00 All Account Assignment// / /16
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    Regards,
    Bernard

  • Version 0 is not defined for fiscal year 2012.

    Hello Experts,
    While am tring to release  a work order, i am getting the below error.
    Version 0 is not defined for fiscal year 2012.
    Message no. GP626
    Diagnosis
    The version 0 is not defined in controlling area DE06 for the fiscal year 2012.
    You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
    System Response
    The version 0 cannot be used for fiscal year 2012.
    Procedure
    Maintain the fiscal year-dependent version parameters for the version 0.
    Execute function
    By this what i understood is we need to change the Settings for each fiscal year for the version 0 in controlling area DE06.
    i.e. we need to add the fiscal year 2012 in that.
    Is this correct????
    If yes what will be the impact of adding 2012 in that screen?
    i think its a soft config only.
    Please let me know the correct process
    Thanks in Advance,
    Satya

    Version 0 is not defined for fiscal year 2015.
    What to do next ? Please help with it.

  • Fiscal year variant V3 is not maintained for calendar year 2010

    Hello Gurus,
    I tried to load the data from data source to Targer i got bellow Error Message and i checked the data in R/3 side 2010 data is available ,
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error message.
    Further analysis:
    The error message(s) was (were) sent by:
    Second step in the update
    Second step in the update
    Second step in the update
    Second step in the update
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    1) Fiscal year variant V3 is not maintained for calendar year 2010
    2)Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
    3)Error when assigning SID: Action VAL_SID_CONVERT table 0FISCYEAR
    4)Activation of M records from Data Store object 0FIAP_O03 terminated
    5)Process 000052 returned with errors
    6)Process 000119 returned with errors
    Please suggest.
    Thanks
    Prakash

    prakash,
    i hope 2010 fiscal variants are not mainiatined in ur bi system
    please do this operation..
    Go to RSA1-> source systems->select R/3 system -> right click->Transfer global settings->Fiscal year varaints->rebuild tables
    then try to repeat the load...the load will be fine if the calender is maintained in R/3 if not raise this issue to the functional people...

  • Fiscal year "A3" Variant is not maintained for Financila year 2010

    Hello All,
    while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
    but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
    here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
    Please Suggest
    Thanks
    Shankar

    Hi Murali and Christian,
    Thanks for your reply..
    now i have configured year dependent fiscal year to my co code, if i configure calender year i am able to create the Asset master
    please help
    Thanks
    Shankar

  • Version  0 not defined for fiscal year...

    Dear Experts..
    Im trying to do an hiring action but system says Version  0 not defined for fiscal year...
    Could someone tell me wat could be the reason???
    Regards
    Shanthini

    Hi,
    Go to SPRO: Controlling -  General controlling - Org - Maintain versions
    On the right hand side select version 0 then select controlling area settings.
    Again select version 0 on the right hand side and select Settings for each fiscal year.
    Then maintain the settings for the relevant fiscal year.
    Regards,
    Dilek

  • Error when closing fiscal year 2010 for fixed assets

    I was performing year end close for asset management using TCode AJAB and received an error that one asset has not completed posting depreciation for 2010.
    When I looked at the asset that was causing the error I noticed there is still remaining "planned" depreciation for the year 2010.  Apparently, there was some subsequent cost added to this asset after December 2010 depreciation was posted.
    Can I process depreciation again for December for this one asset?  If so, what Tcode would I use?

    Hi
    You have to execute repeat run in AFAB for DEC 2010 and then try to close using AJAB.
    REgards
    Malathi
    Edited by: malathi_u01 on Feb 9, 2011 9:09 AM

  • Fiscal year 2010 Not allowed while creating Process order in COR1

    Dear Friends,
    We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating the Controlling document and Profit center document without any problem.
    We have also made the period open as 2011 in MMpv and MMRV. The goods receipts is working fine and the finance entry and material document gets generated for the fiscal year 2011.
    Now we are creating the process order in COR1 and getting the error message Fiscal year 2010 not allowed as below.
    Fiscal year 2010 is not allowed
    Message no. F5568
    Diagnosis
    The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
    System Response
    Error.
    Procedure
    Correct the fiscal year entered.
    In KP26 we have maintianed for activity price for 2010 &  2011 and the system is picking the data for the fiscal year 2010 data and not the FY 2011 data.
    I have checked in OKEQ (Costing version '0') The valide start date for FY2011 is 01.04.2010.
    Is there any other place to maintain the fiscal year in Controlling area or Prodduction Planning???
    I last my patient last 5 days doing R&D. Can any one help me where the fiscal year is picking and why it is picking FY 2010??
    Regards,
    Devendran

    Hi Ajay,
    Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
    I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011??  Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
    Your inputs will defenitely help me to get an clue.
    Regards,
    Devendran

  • "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" PM03

    We have an issue with the PM03 for the year 2010. "When the scheduler tries to schedule the pm..He gets an error "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" The planner will close the work order then re-open it. The error will go away, but when the work order is scheduled there is 0 hours scheduled.. This will be a big issue if there are not any hours assigned to work orders.
    Can you help me?
    Thanks!

    Davison,
      Please maintain the prices for the activity type, Cost center combination for the fiscal year 2010 using transaction KP26. The log generally disappears after you save and leave the transaction. You will see the log again only when you reschedule the order and are in the same transaction.
    Also check whether "scheduling" has been activated for the PM03 control key for scheduling to be taken into consideration for the operation.You can view the same by using the drop down for the control key on the transaction.
    Regards
    Narasimhan

  • Error saying 'Posting period 000 is not defined for fiscal year variant K4'

    Hi All,
       When I try to add a new entry in the transaction OB52, I get an error message saying 'Posting period 000 is not defined for fiscal year variant K4'. The entry that I add is,
    Variant           :  0001
    Account Type: +
    From Period    : 1
    Year               : 1995
    To Period        : 12
    Year               : 2010
    From Period2  : 13
    Year               : 2000
    To period2      : 16
    Year               : 2010
    Please let me know what customising needs to be done to solve this issue.
    Thanks a ton.
    Best Regards,
    Jeff

    Hi,
    Hava you checked in OB52 screen, by default 0001 posting period variant will be there for +, A, D, K, S account types.
    If it is already existed in your OB52 screen, you won't create one more record with the same name. You have to edit the existing 0001 posting period with new values.
    Thanks
    Chandra

  • Message F5 568: Fiscal year 2010 is not allowed

    Hi All,
    While creating reservation through MB21,
    we are transfernig our stock material from one company code to another company code.
    First company code is activated with CALENDAR YEAR, while the other is with FISCAL YEAR (JUL-JUN)
    While creating the reservation, it prompts the following error
    Message F5 568: Fiscal year 2010 is not allowed
    Any suggestion?
    Warm Regards,
    N

    The error is happening because the company codes invloved have different fiscal year variants assigned to them and SAP does not support constellation.
    However, you may want to try opening period 2010 for both company codes if you've not yet done so and try again to see if you will get the same error.
    Please use transaction code OB29 to open calendar year 2010.  This is done by clicking on periods in OB29.
    Elias
    Edited by: Elias Akorli on Oct 28, 2009 12:20 PM
    Edited by: Elias Akorli on Oct 28, 2009 12:25 PM

  • Account not posted to in fiscal year 2010 or trans. figures arc

    Hello  Experts
    i am getting the following error in fs10 while seeing the balances at balance sheet level after done full settlement in CJ88
    Account 172001 0219 not posted to in fiscal year 2010 or trans. figures archived
    Can anybody please give me suggestion?
    Thanks and Regards
    vamsi

    Hello Exports
    thanks for your help
    My problem was solve by my slef
    thanks
    vamsi

  • Custom exit variable for fiscal year/period

    Hi BI Experts
    1) In one of the column i just want Budget data to be displayed for the entire year..i.e even if the user enters 005/2006 for fiscal year /period that column should display 001/2006 to 012/2006 Budget.
    I have created a restricted KF for 0AMOUNT restricted by version(for Budget), valuetype (for Budget )
    now how do I assign variable for Fiscal year/period...and the problem is posting period is not populated ...I mean there is no transformation for that...
    Can you share your experience on that ...full points wil be awarded...
    Thanks

    Hi Ajay and Pradhiba
    I am really sorry for assigning you guuys points ...wasa bit busy ...
    The problem is that the year and posting period is not populated...there fore I cannot use those time characteristics...
    Now I have only fiscal year/period populated..now i want
    if the user enters 005/2006 ....i want my first column to calculate the data for 001/2006 to 012/2006 ...thats the req...
    can u share ur ABAP experience in that...
    thanks

Maybe you are looking for

  • How to feed data into crystal reporte with "SQLQuery" method in c#?

    Hi there, I've an old app that was written in VB with some crystal reports from Crystal Report 7. Now I need to upgrade this old app into c# with newer version of Crystal Report, so we decide to go for VS2010. I can open the report template in the VS

  • Oracle xml parser v2 and non "UTF-8" encoding

    Hi! I trying to create XMLDocument with oracle xml parser v2 JXDocumentBuilderFactory factory = (JXDocumentBuilderFactory) JXDocumentBuilderFactory.newInstance (); JXDocumentBuilder documentBuilder = (JXDocumentBuilder) factory.newDocumentBuilder();

  • Planned delivery cost in MIRO against DC

    Hi All, Is it possible to pay Planned delivery cost against the Delivery challan reference. Is there any standard setting for that. Helpful answers will be rewarded. Regards Dhinakar.

  • Function Module for adding Leading Zero's to a specific field

    Hi, Can anyone please provide a Function that will do the following: 1. Take the value of the field 2. Take the field type 3. Output the value of the field with leading zero's. Anything similar would be very helpful. Thank You & Best Regards, John

  • Third-Party apps can't connect to public wifi  networks.

    When I connect my iPhone to my university's Wi-Fi connection, Apple Apps (Safari, Mail, iTunes, App Store...) all function normally. But when it comes to third-party apps I can't get them to connect to the internet. So is there a workaround to this?