KT4AV with mouse problems

hello;
for a week, I have been in mouse troubles in my computer, I try many mice, PS2 at soon bought a new USB/OPTIC mouse, but it cannot solve the problem.
Problem is that mouse freezes sometimes or makes stupid movements, I scan my computer with different antiviruses and trojan cleaners...and also installed a fresh OS but problem goes on, though I tried Windows XP and linux OSes,all is same, this is suspected me that problem is caused by hardware...
anyone got information about this issue? or mouse killer virus something like that...
thanks

1 Freezing mouse is often due to driver conflicts, like system doesn't know what to do next and next. For starters you could try with only one of the memory sticks.
2 As you say virus and stuff have those symtoms. A background process could also be the culprit. Some suggestions: Press Ctrl+Alt+Del on the occassions, remove not needed autostarting programs, search for spyware and adware.
3 What temps do you have, according to BIOS?

Similar Messages

Having problem with mouse pionter in webpages

i have a problem with mouse pionter in webpages since i've updated my firefox .
when i'm reading a webpage and i click somewhere in the webpage,my mouse pointer goes from the normal pointer to the typing and selecting one. i also can not scroll up and down the page with up and down buttons on the keyboard because it goes straight to the top or the bottom of the page ! i only have this problem with mozilla firefox and it started when i updated my firefox about two months ago .

thank you a lot madperson ! its okay now ! ;)

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Mouse problems with v10.7 Lion and VMWare Fusion 3.1.3; reboot of Lion temporarily fixes it

Since installing Lion, my VMWare Fusion 3.1.3 Windows 7 and XP virtual machines have very strange mouse problems. I thought it might have been caused by 3rd party software on my iMac (Mouse Zoom), because it seemed to work after removing the software, but I have now discovered that it is actually the reboot of OS X v10.7 (and now v10.7.1) that temporarity removes the problem. However, after a while the problem comes back, requiring another reboot of Lion.
The problem is strange behavior of mouse button clicks inside the virtual machine, e.g. unable to double click on a folder or program in Windows because it jumps back to the higher folder tree, as if I had hit the ESC key. In addition to my USB and BlueTooth mice, the Mac touchpad also has the problem. I have confirmed that the problem is probably in how VMWare maps the iMac human interface devices (HIDs) to the virtual mouse inside the VM, because I am able to get correct mouse function by attaching one of my mice directly to the Virtual Machine (there is an edit to the VMX file that enables HID devices).
I have deleted and reinstalled VMWare Fusion 3.1.3 per suggestions on the VMWare support site and/or various forums, but that did not help.

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

[SOLVED] xfce-panel causing problems with mouse/touchpad

Since upgrading the packages below I mouseclicks occasionally do not work. Also scrolling using the scrollwheel and touchpad doesn't start sometimes. I determined it is not a problem with the mouse or touchpad because 'xev' shows the correct events firing. Also I see the icon change from arrow to hand when clicking.
<edit>
It appears that "xfce4-panel" is the cause. I use tint2 instead of xfce-panel, but the process running an empty panel is started by default and somehow interfered with mouse and touchpad events. solved it by removing it from the session, and comment it out in /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml
</edit>
[2011-01-19 21:39] synchronizing package lists
[2011-01-19 21:39] starting full system upgrade
[2011-01-19 21:57] upgraded libxfce4util (4.8.1-1 -> 4.8.1-1)
[2011-01-19 21:57] upgraded exo (0.6.0-2 -> 0.6.0-2)
[2011-01-19 21:57] Generating locales...
[2011-01-19 21:57] en_US.UTF-8... done
[2011-01-19 21:57] en_US.ISO-8859-1... done
[2011-01-19 21:57] nl_NL.UTF-8... done
[2011-01-19 21:57] nl_NL.ISO-8859-1... done
[2011-01-19 21:57] Generation complete.
[2011-01-19 21:57] upgraded glibc (2.12.2-2 -> 2.12.2-2)
[2011-01-19 21:57] upgraded x264 (20110115-1 -> 20110115-1)
[2011-01-19 21:57] upgraded ffmpeg (26387-1 -> 26387-1)
[2011-01-19 21:57] upgraded gdisk (0.6.14-1 -> 0.6.14-1)
[2011-01-19 21:57] upgraded gstreamer0.10-ugly (0.10.16-2 -> 0.10.16-2)
[2011-01-19 21:57] upgraded gstreamer0.10-ugly-plugins (0.10.16-2 -> 0.10.16-2)
[2011-01-19 21:57] upgraded gtk-xfce-engine (2.8.0-1 -> 2.8.0-1)
[2011-01-19 21:57] upgraded lib32-gcc-libs (4.5.2-4.2 -> 4.5.2-4.2)
[2011-01-19 21:57] upgraded libjpeg (8.3.0-1 -> 8.3.0-1)
[2011-01-19 21:57] upgraded xfconf (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:57] upgraded libxfcegui4 (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:57] upgraded mplayer (32792-1 -> 32792-1)
[2011-01-19 21:58] when you use a non-reparenting window manager
[2011-01-19 21:58] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2011-01-19 21:58] /etc/profile.d/openjdk6.sh
[2011-01-19 21:58] upgraded openjdk6 (6.b20_1.9.4-1 -> 6.b20_1.9.4-1)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded openssh (5.6p1-2 -> 5.6p1-2)
[2011-01-19 21:58] upgraded pcre (8.12-1 -> 8.12-1)
[2011-01-19 21:58] upgraded terminal (0.4.5-2 -> 0.4.5-2)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded thunar (1.2.0-1 -> 1.2.0-1)
[2011-01-19 21:58] upgraded thunar-volman (0.6.0-1 -> 0.6.0-1)
[2011-01-19 21:58] upgraded udisks (1.0.2-2 -> 1.0.2-2)
[2011-01-19 21:58] upgraded vim-runtime (7.3.102-1 -> 7.3.102-1)
[2011-01-19 21:58] upgraded vim (7.3.102-1 -> 7.3.102-1)
[2011-01-19 21:58] upgraded vlc (1.1.5-3 -> 1.1.5-3)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded xfburn (0.4.3-3 -> 0.4.3-3)
[2011-01-19 21:58] upgraded xfce-utils (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded xfce4-appfinder (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-dev-tools (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-panel (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-mixer (4.6.1-2 -> 4.6.1-2)
[2011-01-19 21:58] upgraded xfce4-notifyd (0.2.0-1 -> 0.2.0-1)
[2011-01-19 21:58] upgraded xfce4-session (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-settings (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfdesktop (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfwm4 (4.8.0-1 -> 4.8.0-1)
Last edited by rwd (2011-01-23 14:01:25)

welcome to macbook forum.
try this link:
http://docs.info.apple.com/article.html?artnum=17228
and open your system preference / keyboard and mouse / trackpad tab / and changed the preference (double clicking speed, etc) as you like and try it.
Good Luck.

Jumpy scrowl control with mouse.Only with Firefox, not Internet explorer. Problem fixed when I updated to 6. 0.2 but problems returned after about a week.. 0.2

Jumpy scroll wheel control with mouse. Only with Firefox, not Internet explorer.Even pushing the scroll wheel and trying to adjust for a smooth easy scroll the text stops and starts. Problem fixed itself when I updated to 6. 0.2 from an older version but the problem returned after about a week.. The problems go away when I go to web site and scroll but is back when I return to my home page (mozilla firefox)

Good post, and glad to hear you had a solid transition. Mine went well too, though I think I beat the rush.
It's worth noting that the vast and overwhelming majority of headaches people were experiencing were related to download and activation servers (as well as credit check servers for some mobile carriers) being crushed and overwhelmed.
To give you an idea of just how crushed, here are some numbers. In the last year, something in the neighborhood of 8 million iPhones have been sold. That's just shy of 22,000 per day. So the typical traffic is around 22,000 times a day, someone is hitting the server for update/activation.
This weekend, Apple sold 1 million iPhones. In other words, 333,333 phones per day. Holy crap!
As if that wasn't enough, there are 8 million of us out there with the first generation iPhone. Not only do we need to download the new firmware, but we have to install it. The installation process requires hitting the activation server again, to validate the phone. Mind you, not everybody upgraded this weekend, but a few million did. For the sake of argument, we'll assume that's 1 million a day. So, instead of the normall traffic of 22K phones a day, those activation servers got SLAMMED with 1.33 million activations per day.
It ***** that some people had delays and hiccups and a hard time and everything, but completely understandable. With luck things will run more smoothly from here on out.
Trilo

Moving event with mouse in iCal gives me problems on Nokia N96

When I move an item (event) with mouse in iCal, and then iSync to my Nokia N96, I get multiple events in the Nokia Calendar. As if I copy-pasted the item too many times.
The multiple events are on the hours, on which I have dragged around the event.
Somebody having similar issues?

i've been having the same prob as u with my N96 however after i reverted back to factory settings and it's behaving for the time being (touchwood) i've read on posts here that people r having the same prob with their 2nd even 3rd phones so unless u r planning to change ur's for a diff model i'm not sure how helpful replacing the phone will be. I along with many others 'am sure r waiting for the new firmware to come out which hopefully will sort out most of the stability issues. i contacted Nokia and they advised me to wait till the firmware update as well.
i hope this helps.
BE THE CHANGE YOU WISH TO SEE IN THE WORLD - MAHATMA GANDHI
N96-1, Ver. 12.043, Unbranded, Made in Finland.

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

Server 2008 crash - black screen with mouse cursor

dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.

Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Gnome Black Screen with Mouse Cursor after Login

I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

there are a lot of processess running... dunno killing which process will not cause a problem
here is the xorg log ( sorry i dont have much knowlegde to analyse it )
[ 2957.489]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 2957.493] X Protocol Version 11, Revision 0
[ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
[ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
[ 2957.497] Build Date: 21 September 2014 10:53:13AM
[ 2957.498]
[ 2957.499] Current version of pixman: 0.32.6
[ 2957.501] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
[ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2957.507] (==) No Layout section. Using the first Screen section.
[ 2957.507] (==) No screen section available. Using defaults.
[ 2957.507] (**) |-->Screen "Default Screen Section" (0)
[ 2957.507] (**) | |-->Monitor "<default monitor>"
[ 2957.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2957.507] (==) Automatically adding devices
[ 2957.507] (==) Automatically enabling devices
[ 2957.507] (==) Automatically adding GPU devices
[ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2957.507] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2957.507] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2957.507] (II) Loader magic: 0x818d80
[ 2957.507] (II) Module ABI versions:
[ 2957.507] X.Org ANSI C Emulation: 0.4
[ 2957.507] X.Org Video Driver: 18.0
[ 2957.507] X.Org XInput driver : 21.0
[ 2957.507] X.Org Server Extension : 8.0
[ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2957.512] (II) LoadModule: "glx"
[ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2957.514] (II) Module glx: vendor="X.Org Foundation"
[ 2957.514] compiled for 1.16.1, module version = 1.0.0
[ 2957.514] ABI class: X.Org Server Extension, version 8.0
[ 2957.514] (==) AIGLX enabled
[ 2957.514] (==) Matched intel as autoconfigured driver 0
[ 2957.514] (==) Matched intel as autoconfigured driver 1
[ 2957.514] (==) Matched modesetting as autoconfigured driver 2
[ 2957.514] (==) Matched fbdev as autoconfigured driver 3
[ 2957.514] (==) Matched vesa as autoconfigured driver 4
[ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
[ 2957.514] (II) LoadModule: "intel"
[ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2957.515] (II) Module intel: vendor="X.Org Foundation"
[ 2957.515] compiled for 1.16.1, module version = 2.99.916
[ 2957.515] Module class: X.Org Video Driver
[ 2957.515] ABI class: X.Org Video Driver, version 18.0
[ 2957.515] (II) LoadModule: "modesetting"
[ 2957.515] (WW) Warning, couldn't open module modesetting
[ 2957.515] (II) UnloadModule: "modesetting"
[ 2957.515] (II) Unloading modesetting
[ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "fbdev"
[ 2957.515] (WW) Warning, couldn't open module fbdev
[ 2957.515] (II) UnloadModule: "fbdev"
[ 2957.515] (II) Unloading fbdev
[ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "vesa"
[ 2957.515] (WW) Warning, couldn't open module vesa
[ 2957.515] (II) UnloadModule: "vesa"
[ 2957.515] (II) Unloading vesa
[ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2957.516] (++) using VT number 1
[ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2957.517] (==) intel(0): RGB weight 888
[ 2957.517] (==) intel(0): Default visual is TrueColor
[ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
[ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 2957.517] (II) intel(0): Enabled output LVDS1
[ 2957.517] (II) intel(0): Output VGA1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VGA1
[ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output HDMI1
[ 2957.517] (II) intel(0): Output TV1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output TV1
[ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VIRTUAL1
[ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[ 2957.517] (==) intel(0): TearFree disabled
[ 2957.517] (==) intel(0): DPI set to (96, 96)
[ 2957.517] (II) Loading sub module "dri2"
[ 2957.517] (II) LoadModule: "dri2"
[ 2957.517] (II) Module "dri2" already built-in
[ 2957.517] (II) Loading sub module "present"
[ 2957.517] (II) LoadModule: "present"
[ 2957.517] (II) Module "present" already built-in
[ 2957.517] (==) Depth 24 pixmap format is 32 bpp
[ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 2957.518] (==) intel(0): Backing store enabled
[ 2957.518] (==) intel(0): Silken mouse enabled
[ 2957.518] (II) intel(0): HW Cursor enabled
[ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2957.518] (==) intel(0): DPMS enabled
[ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 2957.518] (II) intel(0): [DRI2] Setup complete
[ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
[ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
[ 2957.518] (II) intel(0): hardware support for Present enabled
[ 2957.518] (==) intel(0): display hotplug detection enabled
[ 2957.518] (--) RandR disabled
[ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2957.569] (II) AIGLX: Loaded and initialized i965
[ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
[ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2957.636] (II) LoadModule: "evdev"
[ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
[ 2957.637] compiled for 1.16.0, module version = 2.9.0
[ 2957.637] Module class: X.Org XInput Driver
[ 2957.637] ABI class: X.Org XInput driver, version 21.0
[ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
[ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 2957.638] (**) Video Bus: always reports core events
[ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2957.638] (--) evdev: Video Bus: Found keys
[ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
[ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
[ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 2957.638] (**) Option "xkb_rules" "evdev"
[ 2957.638] (**) Option "xkb_model" "pc104"
[ 2957.638] (**) Option "xkb_layout" "us"
[ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
[ 2957.670] (**) Power Button: always reports core events
[ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2957.670] (--) evdev: Power Button: Found keys
[ 2957.670] (II) evdev: Power Button: Configuring as keyboard
[ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2957.670] (**) Option "xkb_rules" "evdev"
[ 2957.670] (**) Option "xkb_model" "pc104"
[ 2957.670] (**) Option "xkb_layout" "us"
[ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2957.671] (II) No input driver specified, ignoring this device.
[ 2957.671] (II) This device may have been added with another device file.
[ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2957.672] (**) Sleep Button: always reports core events
[ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2957.672] (--) evdev: Sleep Button: Found keys
[ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
[ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2957.672] (**) Option "xkb_rules" "evdev"
[ 2957.672] (**) Option "xkb_model" "pc104"
[ 2957.672] (**) Option "xkb_layout" "us"
[ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
[ 2957.674] (II) No input driver specified, ignoring this device.
[ 2957.674] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
[ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2957.675] (**) Option "xkb_rules" "evdev"
[ 2957.675] (**) Option "xkb_model" "pc104"
[ 2957.675] (**) Option "xkb_layout" "us"
[ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 2957.675] (II) LoadModule: "synaptics"
[ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
[ 2957.676] compiled for 1.16.0, module version = 1.8.1
[ 2957.676] Module class: X.Org XInput Driver
[ 2957.676] ABI class: X.Org XInput driver, version 21.0
[ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.676] (**) Option "Device" "/dev/input/event11"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 2957.710] (**) Option "TapButton1" "1"
[ 2957.710] (**) Option "TapButton2" "2"
[ 2957.710] (**) Option "TapButton3" "3"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
[ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
[ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
[ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 2957.712] (**) ALPS PS/2 Device: always reports core events
[ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
[ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
[ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
[ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 2957.714] (**) Dell WMI hotkeys: always reports core events
[ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
[ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
[ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 2957.714] (**) Option "xkb_rules" "evdev"
[ 2957.714] (**) Option "xkb_model" "pc104"
[ 2957.714] (**) Option "xkb_layout" "us"
[ 2963.887] (II) evdev: Dell WMI hotkeys: Close
[ 2963.887] (II) UnloadModule: "evdev"
[ 2963.887] (II) systemd-logind: releasing fd for 13:69
[ 2963.949] (II) evdev: ALPS PS/2 Device: Close
[ 2963.950] (II) UnloadModule: "evdev"
[ 2963.950] (II) systemd-logind: releasing fd for 13:74
[ 2964.016] (II) UnloadModule: "synaptics"
[ 2964.016] (II) systemd-logind: releasing fd for 13:75
[ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2964.070] (II) UnloadModule: "evdev"
[ 2964.070] (II) systemd-logind: releasing fd for 13:64
[ 2964.123] (II) evdev: Sleep Button: Close
[ 2964.123] (II) UnloadModule: "evdev"
[ 2964.123] (II) systemd-logind: releasing fd for 13:67
[ 2964.156] (II) evdev: Power Button: Close
[ 2964.156] (II) UnloadModule: "evdev"
[ 2964.156] (II) systemd-logind: releasing fd for 13:66
[ 2964.183] (II) evdev: Video Bus: Close
[ 2964.183] (II) UnloadModule: "evdev"
[ 2964.183] (II) systemd-logind: releasing fd for 13:76
[ 2964.271] (EE) Server terminated successfully (0). Closing log file.

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Scrolling with mouse on pages create black and white lines,

When scrolling with mouse, periodically the whole screen turns into black and white lines. Sometimes whole page, sometimes just pictures/side ads. If you continue to scroll it does go away but then you need to scroll back to where the lines started, its hard to explain, i have taken 1 photo of the problem but will take more photos as i can, i really enjoy how Firefox runs on my computer, it has always been the best browser for my needs. I did recently buy a new desktop, but it did it then also, so i removed it and tried running explorer and Google and i just don't like them, so i am hoping we can get this fixed.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
If there is a problem with scrolling on web pages then try to disable smooth scrolling.
*Tools > Options > Advanced > General: Browsing: "Use smooth scrolling"

Magic mouse problem - side to side scrolling...

Is anyone else having a problem with mouse partially working? I can scroll up and down, zoom in, and swipe with 2 fingers but can't scroll horizontally or 360. Also I can only use the scroll up and down feature with 1 finger if the web page has a side scroll bar. So for instance I can only use mouse in the traditional way on the imac front page or on a web page without a scroll bar. This is driving me nuts!
I can't understand how it's half working. Do I need to send it back? On os 10.6.2 and showing up in pref box with all options ticked. Have only had imac a couple of weeks so any suggestions would be great - thanks.

red72 wrote:
[…] can't scroll horizontally or 360.
It seems obvious that you can't scroll horizontally unless the page you're visiting, or your document, is larger than the width of your window.

Mouse Problems Since 10.6.8 Update

Since I applied the OS X 10.6.8 update to my MacBook, I have started to have very annoying mouse problems. Sometimes the mouse gets stuck on a window or icon as if I am dragging it. More often, the left mouse button stops doing anything and the right mouse button starts acting like the left mouse button. At the same time, the mouse is often incapable of clicking on a highlighted button. Safari often seems to be open when this happens.
I have tried two different wireless mice and, most recently, a basic corded mouse. I have also tried both USB ports with the corded mouse.
Has anyone else seen this and figured out how to fix the problem?

Same problem here with a macbook pro. I desactivate teleport to see if the problem is related.

KT4AV with mouse problems

Similar Messages

Maybe you are looking for