KVM Switching

I would like to know of any suggestions for the following situation.
I work at a school and have a desktop PC, a MacBook Pro and a MacMini server. I am currently running a cinema display as my main monitor. I would like to suggestions on a KVM switch to buy that will allow me to use the Cinema Display (over DVI) with the Macbook Pro, MacMini server and PC. I was looking at this solution (http://www.gdsys.de/en/products/kvm-switches/dvi-dlvga-kvm-switches/dl-mux/) but was hoping for a North American alternative if possible.
If this should be posted in a different forum, please let me know and I will delete and post elsewhere.
Thanks,
Blake

Well, I'm not entirely certain what is causing this - or if it is a problem anymore.  I tried to manually switch my KVM and noticed it stopped switching altogether!  Anything on port 1 works perfectly.  Anything on any other port will not get displayed at all.  =/  KVM seems to have blown up.  I also had a new dell studio XPS 121m explode (fans go full blast but no post, tested on 3 monitors and nothing), so I'm thinking the vid card on the new comp blew up and possibly took the KVM with it.  =/   On the bright side, the comp was 2 days old and we got a brand new one that has been working fine since then.
Anyone know how to fix a "stuck" KVM?  I tried disconnecting all plugs for an hour or so to see if that reset it, but that didn't work.

Similar Messages

  • How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

    I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

    You would need to get  HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
    If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

  • Mac mini with KVM switch

    I'm thinking of getting a Mac mini, but I need my Windows PC for some apps that aren't available on Mac and some other stuff. I can't afford to get a large monitor for a Mini if I get one, but my current PC has a big flat panel display.I noticed the KVM cable way of moving your stuff (a cale taht lets peripherals like monitors, keyboard and mice be connected to two computers so you don't need a separate one for eache computer), and was wondering if that's a possible way of using both without buying monitors, etc. for the Mini.
    Is anyone doing this, and if so, what do you think of using the Mini this way? Does it work well, and what are the pros and cons of doing this?
    Thanks,
    Ilya Smirnov

    My experience with my Belkin KVM is also good, with the exception of one thing. I can't switch back to the Mini once I've switched to the PC. I have to unplug the PS2/USB adapter from the Mini and THEN do Scroll Lock-Scroll Lock 2. The KVM then switches, and I can plug back in. Everything works fine after that. It gets cumbersome though if you want to switch seamlessly between the two.
    I only use the KVM for the KM part these days since my monitor (Samsung 930b 19" LCD) is able to switch between DVI and VGA by itself. And since I'm using the Windows box mostly for gaming these days, I use the DVI with the PC and the VGA with the Mac. The KVM was able to handle it without any distortion when I ran VGA on both of them. To the best of my knowledge, there isn't a cost-effective DVI KVM switch out there yet. I could be wrong.

  • KVM switch and Mavericks don't play well together

    I upgraded to Mavericks yesterday, and started having this very annoying problem with my KVM switch, which used to work fine with Mountain Lion. I've been using this KVM switch for my mac mini and PC, in order to share my keyboard and mouse, very stably for several months.
    Basically, when switching back and forth, there is a chance that ALL the peripheral devices would stop working in Mavericks. This includes my apple bluetooth keyboard and the magic touchpad, which are not related with USB (or maybe the bluetooth chip is still hooked up via USB inside).
    For some reason, screen sharing stops working too, althought the IP I was trying to connect to was the ethernet port.
    If I try to do a shutdown -r now via SSH, the system tries to shut itself down, but would get stuck with a spinning animation on the screen.
    There is nothing in the system log, no error message.
    My KVM switch is an IOGear GCS42UW6. Connected USB devices are: Apple USB keyboard and Logitech G500 mouse.

    10.8 worked well with my Mac Mini (2009) connected to IOGEAR KVM model GCS1108. My mouse is from Redmond and the keyboard is a Goldtouch.
    Mavericks has a problem with my KVM switch as well. It seems to be a USB problem.
    Case 1: The Mini's video is connected to the KVM switch -- mini DVI port to DVI. If the KVM USB cable (known good) is connected, the Mini chimes at boot but no grey Apple logo appears. LCD remains blank white. Boot does not progress.
    Case 2: The Mini's video is connected to the KVM switch, as before. If the KVM USB cable is NOT connected, the Mini chimes at boot, the grey logo appears, and boot proceeds normally. Video is fine. I  then connect the KVM USB cable to the Mini and use keyboard and mouse. KVM switching works as expected.
    If the KVM USB cable is NOT connected but a keyboard and mouse are connected directly to the Mini, the boot sequence is normal. Video works.
    The problem is not the hardware, all of which worked well with 10.8 (Mountain Lion). I would downgrade if Apple made 10.8 available from the App Store.

  • I'm running iTunes Radio on a WinXP PC with a KVM USB switch. With the latest iTunes update, iTunes Radio will no longer continue to stream when I switch to my work PC via the KVM switch. Can this be fixed?

    I use a WinXP machine as a dedicated Music PC. I also have a separate "newer" PC to do work on. Each machine shares a Monitor, keyboard, and mouse through a KVM USB switch. I like to stream iTunes radio by starting iTunes on a selected station, then 'switch' to my work PC so that the Music PC will stream iTunes like a radio station through my Audio sound system. This used to work fine up until the latest update to iTunes. Now, when the Music PC detects the KVM switching to the other PC (basically a system hardware disconnect detection), iTunes will stop. Can I turn this 'hardward detection' issue off in iTunes?

    Check your  i tunes version on the PC.  you need the most recent version. 
    Other potentials -
    try a different usb port,
    try a different cable.

  • Xorg + KVM switch = Flickering and artifacts

    Dear all,
    I recently bought two small kvm switches produced by Digitus.
    They are working fine when I use my Windows box but sadly it's another story with my Arch laptop. When I don't use the KVM switches my two displays a rendered fine. However when I plug the KVM switches I get some kind of flickering red/green/blue lines/pixels on the display, It's a bit tricky to describe so here is a photo (Here it is some green dot, but that might vary) :
    As you might think, I am trying to get rid of those artifacts.
    A couple of information regarding my setup :
    KVM switches
    Monitor
    On my laptop the graphic adapter is an intel hd 4000
    dna@DNA-NOTEBOOK ~ % sudo lspci -vvv | grep -A 20 "00:02.0"
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device 1815
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 45
    Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 2000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee00018 Data: 0000
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: i915
    My intel driver configuration (I have already tested with some other options as you might see. I'm not a graphical guru so please bear with me if those options are irellevant):
    Note that I don't have any xorg.conf nor a configuration files for the monitors.
    dna@DNA-NOTEBOOK ~ % cat /etc/X11/xorg.conf.d/20-intel.conf
    Section "Device"
    Identifier "Intel Graphics"
    Driver "intel"
    Option "AccelMethod" "sna"
    # Option "TearFree" "true"
    # Option "DRI" "false"
    # Option "AccelMethod" "uxa"
    EndSection
    xrandr query (HDMI1 is using the KVM switch and HDMI2 is not, they are using the exact same mode)
    dna@DNA-NOTEBOOK ~ % xrandr -q
    Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 32767 x 32767
    LVDS1 connected 1366x768+1920+0 (normal left inverted right x axis y axis) 256mm x 144mm
    1366x768 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
    1920x1080 60.0*+
    1680x1050 59.9
    1680x945 60.0
    1400x1050 74.9 59.9
    1600x900 60.0
    1280x1024 75.0 60.0
    1440x900 75.0 59.9
    1280x960 60.0
    1366x768 60.0
    1360x768 60.0
    1280x800 74.9 59.9
    1152x864 75.0
    1280x768 74.9 60.0
    1024x768 75.0 70.1 60.0
    1024x576 60.0
    800x600 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 75.0 72.8 66.7 60.0
    720x400 70.1
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
    1920x1080 60.0*+
    1680x1050 59.9
    1680x945 60.0
    1400x1050 74.9 59.9
    1600x900 60.0
    1280x1024 75.0 60.0
    1440x900 75.0 59.9
    1280x960 60.0
    1366x768 60.0
    1360x768 60.0
    1280x800 74.9 59.9
    1152x864 75.0
    1280x768 74.9 60.0
    1024x768 75.0 70.1 60.0
    1024x576 60.0
    800x600 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 75.0 72.8 66.7 60.0
    720x400 70.1
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 disconnected (normal left inverted right x axis y axis)
    DP3 disconnected (normal left inverted right x axis y axis)
    My Xorg log
    [ 12802.582]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 12802.582] X Protocol Version 11, Revision 0
    [ 12802.582] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 12802.582] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 12802.582] Kernel command line: root=/dev/sda2 ro elevator=noop initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 12802.582] Build Date: 09 March 2013 08:45:37AM
    [ 12802.582]
    [ 12802.582] Current version of pixman: 0.28.2
    [ 12802.583] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12802.583] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12802.583] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 11 10:58:50 2013
    [ 12802.583] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 12802.583] (==) No Layout section. Using the first Screen section.
    [ 12802.583] (==) No screen section available. Using defaults.
    [ 12802.583] (**) |-->Screen "Default Screen Section" (0)
    [ 12802.583] (**) | |-->Monitor "<default monitor>"
    [ 12802.583] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 12802.583] (**) | |-->Device "Intel Graphics"
    [ 12802.583] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 12802.583] (==) Automatically adding devices
    [ 12802.583] (==) Automatically enabling devices
    [ 12802.583] (==) Automatically adding GPU devices
    [ 12802.583] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 12802.583] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 12802.583] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 12802.583] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 12802.583] (II) Loader magic: 0x7fcc20
    [ 12802.583] (II) Module ABI versions:
    [ 12802.583] X.Org ANSI C Emulation: 0.4
    [ 12802.583] X.Org Video Driver: 13.1
    [ 12802.583] X.Org XInput driver : 18.0
    [ 12802.583] X.Org Server Extension : 7.0
    [ 12802.583] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 12802.584] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 12802.584] Initializing built-in extension Generic Event Extension
    [ 12802.584] Initializing built-in extension SHAPE
    [ 12802.584] Initializing built-in extension MIT-SHM
    [ 12802.585] Initializing built-in extension XInputExtension
    [ 12802.585] Initializing built-in extension XTEST
    [ 12802.585] Initializing built-in extension BIG-REQUESTS
    [ 12802.585] Initializing built-in extension SYNC
    [ 12802.585] Initializing built-in extension XKEYBOARD
    [ 12802.585] Initializing built-in extension XC-MISC
    [ 12802.585] Initializing built-in extension SECURITY
    [ 12802.585] Initializing built-in extension XINERAMA
    [ 12802.585] Initializing built-in extension XFIXES
    [ 12802.585] Initializing built-in extension RENDER
    [ 12802.585] Initializing built-in extension RANDR
    [ 12802.585] Initializing built-in extension COMPOSITE
    [ 12802.585] Initializing built-in extension DAMAGE
    [ 12802.585] Initializing built-in extension MIT-SCREEN-SAVER
    [ 12802.585] Initializing built-in extension DOUBLE-BUFFER
    [ 12802.585] Initializing built-in extension RECORD
    [ 12802.585] Initializing built-in extension DPMS
    [ 12802.585] Initializing built-in extension X-Resource
    [ 12802.585] Initializing built-in extension XVideo
    [ 12802.585] Initializing built-in extension XVideo-MotionCompensation
    [ 12802.585] Initializing built-in extension XFree86-VidModeExtension
    [ 12802.586] Initializing built-in extension XFree86-DGA
    [ 12802.586] Initializing built-in extension XFree86-DRI
    [ 12802.587] Initializing built-in extension DRI2
    [ 12802.587] (II) LoadModule: "glx"
    [ 12802.587] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12802.587] (II) Module glx: vendor="X.Org Foundation"
    [ 12802.587] compiled for 1.13.3, module version = 1.0.0
    [ 12802.587] ABI class: X.Org Server Extension, version 7.0
    [ 12802.587] (==) AIGLX enabled
    [ 12802.588] Loading extension GLX
    [ 12802.588] (II) LoadModule: "intel"
    [ 12802.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 12802.588] (II) Module intel: vendor="X.Org Foundation"
    [ 12802.588] compiled for 1.13.2.901, module version = 2.21.3
    [ 12802.588] Module class: X.Org Video Driver
    [ 12802.588] ABI class: X.Org Video Driver, version 13.1
    [ 12802.588] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 12802.589] (++) using VT number 1
    [ 12802.589] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 12802.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 12802.589] (==) intel(0): RGB weight 888
    [ 12802.589] (==) intel(0): Default visual is TrueColor
    [ 12802.589] (**) intel(0): Option "AccelMethod" "sna"
    [ 12802.589] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 12802.589] (**) intel(0): Framebuffer tiled
    [ 12802.589] (**) intel(0): Pixmaps tiled
    [ 12802.589] (**) intel(0): "Tear free" disabled
    [ 12802.589] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 12802.589] (II) intel(0): Output LVDS1 has no monitor section
    [ 12802.589] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 12802.602] (II) intel(0): Output VGA1 has no monitor section
    [ 12802.603] (II) intel(0): Output HDMI1 has no monitor section
    [ 12802.645] (II) intel(0): Output DP1 has no monitor section
    [ 12802.898] (II) intel(0): Output HDMI2 has no monitor section
    [ 12802.912] (II) intel(0): Output HDMI3 has no monitor section
    [ 12802.952] (II) intel(0): Output DP2 has no monitor section
    [ 12802.992] (II) intel(0): Output DP3 has no monitor section
    [ 12802.992] (II) intel(0): EDID for output LVDS1
    [ 12802.992] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 12802.992] (II) intel(0): Year: 2012 Week: 0
    [ 12802.992] (II) intel(0): EDID Version: 1.4
    [ 12802.992] (II) intel(0): Digital Display Input
    [ 12802.992] (II) intel(0): 6 bits per channel
    [ 12802.992] (II) intel(0): Digital interface is undefined
    [ 12802.992] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 12802.992] (II) intel(0): Gamma: 2.20
    [ 12802.992] (II) intel(0): No DPMS capabilities specified
    [ 12802.992] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 12802.992] (II) intel(0): First detailed timing is preferred mode
    [ 12802.992] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 12802.992] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 12802.992] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 12802.992] (II) intel(0): Manufacturer's mask: 0
    [ 12802.992] (II) intel(0): Supported detailed timing:
    [ 12802.992] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 12802.992] (II) intel(0): Supported detailed timing:
    [ 12802.992] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 12802.992] (II) intel(0): Unknown vendor-specific block 2
    [ 12802.992] (II) intel(0): EDID (in hex):
    [ 12802.992] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 12802.992] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 12802.992] (II) intel(0): 1d505400000001010101010101010101
    [ 12802.992] (II) intel(0): 0101010101010e1e561651000c303020
    [ 12802.992] (II) intel(0): 25000090100000190914561651000c30
    [ 12802.992] (II) intel(0): 30202500009010000019000000000000
    [ 12802.992] (II) intel(0): 00000000000000000000000000000002
    [ 12802.992] (II) intel(0): 000c4cff0a3c64100f196400000000c1
    [ 12802.992] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Printing probed modes for output LVDS1
    [ 12802.992] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12802.992] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12802.992] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 12802.992] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 12802.992] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 12802.992] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 12803.005] (II) intel(0): EDID for output VGA1
    [ 12803.006] (II) intel(0): EDID for output HDMI1
    [ 12803.048] (II) intel(0): EDID for output DP1
    [ 12803.302] (II) intel(0): EDID for output HDMI2
    [ 12803.302] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
    [ 12803.302] (II) intel(0): Year: 2011 Week: 19
    [ 12803.302] (II) intel(0): EDID Version: 1.3
    [ 12803.302] (II) intel(0): Digital Display Input
    [ 12803.302] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 12803.302] (II) intel(0): Gamma: 2.20
    [ 12803.302] (II) intel(0): DPMS capabilities: Off
    [ 12803.302] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 12803.302] (II) intel(0): First detailed timing is preferred mode
    [ 12803.302] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 12803.302] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 12803.302] (II) intel(0): Supported established timings:
    [ 12803.302] (II) intel(0): 720x400@70Hz
    [ 12803.302] (II) intel(0): 640x480@60Hz
    [ 12803.302] (II) intel(0): 640x480@67Hz
    [ 12803.302] (II) intel(0): 800x600@56Hz
    [ 12803.302] (II) intel(0): 800x600@60Hz
    [ 12803.302] (II) intel(0): 1024x768@60Hz
    [ 12803.302] (II) intel(0): 1024x768@70Hz
    [ 12803.302] (II) intel(0): Manufacturer's mask: 0
    [ 12803.302] (II) intel(0): Supported standard timings:
    [ 12803.302] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 12803.302] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 12803.302] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 12803.302] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 12803.302] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 12803.302] (II) intel(0): Supported detailed timing:
    [ 12803.302] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 12803.302] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 12803.302] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 12803.302] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 12803.302] (II) intel(0): Monitor name: Acer P226HQL
    [ 12803.302] (II) intel(0): Serial No: LNJ0W0014320
    [ 12803.302] (II) intel(0): EDID (in hex):
    [ 12803.302] (II) intel(0): 00ffffffffffff00047298012b249011
    [ 12803.302] (II) intel(0): 1315010380301b782a9535a159579f27
    [ 12803.302] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 12803.302] (II) intel(0): 010101010101023a801871382d40582c
    [ 12803.302] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 12803.302] (II) intel(0): 5311000a202020202020000000fc0041
    [ 12803.302] (II) intel(0): 636572205032323648514c0a000000ff
    [ 12803.302] (II) intel(0): 004c4e4a3057303031343332300a00d9
    [ 12803.302] (II) intel(0): Printing probed modes for output HDMI2
    [ 12803.302] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 12803.302] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 12803.302] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 12803.302] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 12803.302] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 12803.302] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 12803.302] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 12803.315] (II) intel(0): EDID for output HDMI3
    [ 12803.355] (II) intel(0): EDID for output DP2
    [ 12803.395] (II) intel(0): EDID for output DP3
    [ 12803.395] (II) intel(0): Output LVDS1 connected
    [ 12803.395] (II) intel(0): Output VGA1 disconnected
    [ 12803.395] (II) intel(0): Output HDMI1 disconnected
    [ 12803.395] (II) intel(0): Output DP1 disconnected
    [ 12803.395] (II) intel(0): Output HDMI2 connected
    [ 12803.395] (II) intel(0): Output HDMI3 disconnected
    [ 12803.395] (II) intel(0): Output DP2 disconnected
    [ 12803.395] (II) intel(0): Output DP3 disconnected
    [ 12803.395] (II) intel(0): Using exact sizes for initial modes
    [ 12803.395] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 12803.395] (II) intel(0): Output HDMI2 using initial mode 1366x768
    [ 12803.395] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 12803.395] (==) intel(0): DPI set to (96, 96)
    [ 12803.395] (II) Loading sub module "dri2"
    [ 12803.395] (II) LoadModule: "dri2"
    [ 12803.395] (II) Module "dri2" already built-in
    [ 12803.395] (==) Depth 24 pixmap format is 32 bpp
    [ 12803.395] (II) intel(0): SNA initialized with IvyBridge backend
    [ 12803.395] (==) intel(0): Backing store disabled
    [ 12803.395] (==) intel(0): Silken mouse enabled
    [ 12803.395] (II) intel(0): HW Cursor enabled
    [ 12803.395] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 12803.396] (==) intel(0): DPMS enabled
    [ 12803.396] (II) intel(0): [DRI2] Setup complete
    [ 12803.396] (II) intel(0): [DRI2] DRI driver: i965
    [ 12803.396] (II) intel(0): direct rendering: DRI2 Enabled
    [ 12803.397] (==) intel(0): hotplug detection: "enabled"
    [ 12803.397] (--) RandR disabled
    [ 12803.406] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 12803.406] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context
    [ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 12803.406] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 12803.406] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 12803.406] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 12803.406] (II) AIGLX: Loaded and initialized i965
    [ 12803.406] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 12803.406] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12803.465] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
    [ 12803.645] (II) intel(0): Setting screen physical size to 361 x 203
    [ 12803.676] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 12803.676] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12803.676] (II) LoadModule: "evdev"
    [ 12803.676] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 12803.676] (II) Module evdev: vendor="X.Org Foundation"
    [ 12803.676] compiled for 1.13.0, module version = 2.7.3
    [ 12803.676] Module class: X.Org XInput Driver
    [ 12803.676] ABI class: X.Org XInput driver, version 18.0
    [ 12803.676] (II) Using input driver 'evdev' for 'Power Button'
    [ 12803.676] (**) Power Button: always reports core events
    [ 12803.676] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 12803.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 12803.677] (--) evdev: Power Button: Found keys
    [ 12803.677] (II) evdev: Power Button: Configuring as keyboard
    [ 12803.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 12803.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 12803.677] (**) Option "xkb_rules" "evdev"
    [ 12803.677] (**) Option "xkb_model" "evdev"
    [ 12803.677] (**) Option "xkb_layout" "us"
    [ 12803.699] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 12803.699] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 12803.699] (II) Using input driver 'evdev' for 'Video Bus'
    [ 12803.699] (**) Video Bus: always reports core events
    [ 12803.699] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 12803.699] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 12803.699] (--) evdev: Video Bus: Found keys
    [ 12803.699] (II) evdev: Video Bus: Configuring as keyboard
    [ 12803.699] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 12803.699] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 12803.699] (**) Option "xkb_rules" "evdev"
    [ 12803.699] (**) Option "xkb_model" "evdev"
    [ 12803.699] (**) Option "xkb_layout" "us"
    [ 12803.699] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 12803.699] (II) No input driver specified, ignoring this device.
    [ 12803.699] (II) This device may have been added with another device file.
    [ 12803.700] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 12803.700] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 12803.700] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 12803.700] (**) Sleep Button: always reports core events
    [ 12803.700] (**) evdev: Sleep Button: Device: "/dev/input/event1"
    [ 12803.700] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 12803.700] (--) evdev: Sleep Button: Found keys
    [ 12803.700] (II) evdev: Sleep Button: Configuring as keyboard
    [ 12803.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
    [ 12803.700] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 12803.700] (**) Option "xkb_rules" "evdev"
    [ 12803.700] (**) Option "xkb_model" "evdev"
    [ 12803.700] (**) Option "xkb_layout" "us"
    [ 12803.700] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event21)
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event21"
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24/event21"
    [ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 9)
    [ 12803.701] (**) Option "xkb_rules" "evdev"
    [ 12803.701] (**) Option "xkb_model" "evdev"
    [ 12803.701] (**) Option "xkb_layout" "us"
    [ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event22)
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event22"
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input25/event22"
    [ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 10)
    [ 12803.701] (**) Option "xkb_rules" "evdev"
    [ 12803.701] (**) Option "xkb_model" "evdev"
    [ 12803.701] (**) Option "xkb_layout" "us"
    [ 12803.702] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 12803.702] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 12803.702] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event7)
    [ 12803.702] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
    [ 12803.702] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
    [ 12803.702] (**) HP HD Webcam [Fixed]: always reports core events
    [ 12803.702] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event7"
    [ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
    [ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Found keys
    [ 12803.702] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
    [ 12803.702] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event7"
    [ 12803.702] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 11)
    [ 12803.702] (**) Option "xkb_rules" "evdev"
    [ 12803.702] (**) Option "xkb_model" "evdev"
    [ 12803.702] (**) Option "xkb_layout" "us"
    [ 12803.703] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
    [ 12803.703] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 12803.703] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 12803.703] (**) OCT KVMLite: always reports core events
    [ 12803.703] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
    [ 12803.703] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 12803.703] (--) evdev: OCT KVMLite: Found keys
    [ 12803.703] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 12803.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input19/event19"
    [ 12803.703] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
    [ 12803.703] (**) Option "xkb_rules" "evdev"
    [ 12803.703] (**) Option "xkb_model" "evdev"
    [ 12803.703] (**) Option "xkb_layout" "us"
    [ 12803.703] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event20)
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
    [ 12803.703] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
    [ 12803.703] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event20"
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
    [ 12803.704] (**) Option "YAxisMapping" "10 11"
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input23/event20"
    [ 12803.704] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
    [ 12803.704] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
    [ 12803.704] (II) No input driver specified, ignoring this device.
    [ 12803.704] (II) This device may have been added with another device file.
    [ 12803.704] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 12803.704] (II) No input driver specified, ignoring this device.
    [ 12803.704] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
    [ 12803.706] (II) No input driver specified, ignoring this device.
    [ 12803.706] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event16)
    [ 12803.706] (II) No input driver specified, ignoring this device.
    [ 12803.706] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 12803.706] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.706] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 12803.706] (**) AT Translated Set 2 keyboard: always reports core events
    [ 12803.706] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 12803.706] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 12803.706] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 12803.706] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 12803.706] (**) Option "xkb_rules" "evdev"
    [ 12803.706] (**) Option "xkb_model" "evdev"
    [ 12803.706] (**) Option "xkb_layout" "us"
    [ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event17)
    [ 12803.707] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 12803.707] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 12803.707] (**) PS/2 Generic Mouse: always reports core events
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event17"
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 12803.707] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.707] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
    [ 12803.707] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 12803.707] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
    [ 12803.707] (II) No input driver specified, ignoring this device.
    [ 12803.707] (II) This device may have been added with another device file.
    [ 12803.707] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 12803.707] (II) LoadModule: "synaptics"
    [ 12803.708] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 12803.708] (II) Module synaptics: vendor="X.Org Foundation"
    [ 12803.708] compiled for 1.13.2, module version = 1.6.3
    [ 12803.708] Module class: X.Org XInput Driver
    [ 12803.708] ABI class: X.Org XInput driver, version 18.0
    [ 12803.708] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 12803.708] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 12803.708] (**) Option "Device" "/dev/input/event18"
    [ 12803.778] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 12803.778] (**) Option "TapButton1" "1"
    [ 12803.779] (**) Option "TapButton2" "2"
    [ 12803.779] (**) Option "TapButton3" "3"
    [ 12803.779] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 12803.779] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 12803.805] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input18/event18"
    [ 12803.805] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 12803.805] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 12803.806] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 12803.806] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.806] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.807] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 12803.807] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 12803.807] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 12803.807] (**) HP WMI hotkeys: always reports core events
    [ 12803.807] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 12803.807] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 12803.807] (--) evdev: HP WMI hotkeys: Found keys
    [ 12803.807] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 12803.807] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 12803.807] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
    [ 12803.807] (**) Option "xkb_rules" "evdev"
    [ 12803.807] (**) Option "xkb_model" "evdev"
    [ 12803.807] (**) Option "xkb_layout" "us"
    [ 12804.127] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12804.127] (II) intel(0): Printing DDC gathered Modelines:
    [ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12832.404] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12832.404] (II) intel(0): Printing DDC gathered Modelines:
    [ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12832.816] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12832.816] (II) intel(0): Printing DDC gathered Modelines:
    [ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12843.035] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12843.035] (II) intel(0): Printing DDC gathered Modelines:
    [ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12843.443] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12843.481] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12843.493] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 12843.702] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12843.702] (II) intel(0): Printing DDC gathered Modelines:
    [ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12849.209] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 12851.804] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 12851.804] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12851.855] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 12852.035] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12852.035] (II) intel(0): Printing DDC gathered Modelines:
    [ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12852.458] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 14696.360] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 14696.540] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 15755.118] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 15755.300] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 19135.570] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19135.570] (II) intel(0): Printing DDC gathered Modelines:
    [ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19338.494] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19338.494] (II) intel(0): Printing DDC gathered Modelines:
    [ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19338.907] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19338.907] (II) intel(0): Printing DDC gathered Modelines:
    [ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19339.308] [mi] Increasing EQ size to 512 to prevent dropped events.
    [ 19361.868] (II) config/udev: removing device OCT KVMLite
    [ 19361.871] (II) evdev: OCT KVMLite: Close
    [ 19361.871] (II) UnloadModule: "evdev"
    [ 19363.084] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
    [ 19363.084] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 19363.084] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 19363.084] (**) OCT KVMLite: always reports core events
    [ 19363.084] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
    [ 19363.084] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 19363.084] (--) evdev: OCT KVMLite: Found keys
    [ 19363.084] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 19363.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input26/event19"
    [ 19363.085] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
    [ 19363.085] (**) Option "xkb_rules" "evdev"
    [ 19363.085] (**) Option "xkb_model" "evdev"
    [ 19363.085] (**) Option "xkb_layout" "us"
    [ 19368.413] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19368.414] (II) intel(0): Printing DDC gathered Modelines:
    [ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19368.826] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19368.826] (II) intel(0): Printing DDC gathered Modelines:
    [ 19368.826] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19368.827] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19529.431] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19529.431] (II) intel(0): Printing DDC gathered Modelines:
    [ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19530.153] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19530.153] (II) intel(0): Printing DDC gathered Modelines:
    [ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19540.502] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19540.502] (II) intel(0): Printing DDC gathered Modelines:
    [ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19540.991] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19540.991] (II) intel(0): Printing DDC gathered Modelines:
    [ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19545.780] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19545.780] (II) intel(0): Printing DDC gathered Modelines:
    [ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19546.260] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
    [ 19546.455] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19546.455] (II) intel(0): Printing DDC gathered Modelines:
    [ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 20234.499] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 20234.499] (II) intel(0): Printing DDC gathered Modelines:
    [ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    I had a look on the windows box and as far as I can tell the same mode is used 1920x1080@60Hz. I really have no idea of what's is going on, so far I can think of :
    - Something wrong with xorg
    - Something wrong with the i915 driver
    - The KVM cable armouring
    - Something else?!
    Any suggestion/remark/help is welcome
    And please let me know if you need me to gather more information.
    EDIT 1:
    Crappy image hoster
    Last edited by dna (2013-03-12 09:05:40)

    Hi, sorry for the delayed answer, I didn't have the time to update the topic yesterday evening.
    Also, when you boot the Arch machine, do you have the kvm set to its port until from bootloader until X is up? I have an issue with resolution detection when I boot any Linux with my kvm set to another port. It's not artefacts, but it may be worth looking into.
    During the entire boot process up to some point in the systemd init sequence my external screens are disabled either by using the KVM switch or not (When the KVM is used, the active port is set to the Arch box).
    I have did some research yesterday and I am wondering if that might be caused by DDC?! I found this post on the Open Suze forums. The user seems to describe a simmilar issue but with another hardware.
    I have been trying to disable DDC but unfortunately without success so far. By adding to the device section of Xorg (According the intel man page)
    Option "DDC" "false"
    The option is simply ignored :
    1 dna@DNA-NOTEBOOK ~ % grep DDC /var/log/Xorg.0.log
    [ 504.104] (WW) intel(0): Option "NoDDC" is not used
    [ 505.189] (II) intel(0): Printing DDC gathered Modelines:
    Is that because KMS has now become mandatory?
    Could those artifacts be the actual DDC queries? or some signal corruption due to improper handling on the KVM switch?
    EDIT1:
    Well according to the data sheet, this switch should support DDC with DDC2 Monitor. How can I found out which DDC version my monitor support? I can't find anything on the web for this model.
    I am also contacting Digitus regarding this issue. I will keep this post updated.
    EDIT2:
    I keep digging this stuff and I don't think it has to do with DDC for two reasons. First I can disable DDC/CI feature on my monitor. Sadly it didn't help. Still those artifacts. Second xrandr is able to read the EDID correctly. I am no expert but as I understand that's why DDC is meant for.
    I have also noticed an interesting thing this afternoon. I was working remotely on a box via rdp but for some reason the artifacts was not rendered on the viewer. They stopped at the border ... Any idea?
    EDIT3:
    I kept investigating this issue during the past weekend and I  think it's related to the intel driver. First I have tested the switch with 2 others machines. The first one was running a dual boot with windows 8 and arch. Both OS detected and rendered the display correctly (On windows the latest catalyst driver was used and on arch the open source radeon driver). The second setup however produced the same display corruption (As the picture in the first post) and was also running the intel driver but on a HD 3000 serie graphic chip.
    Secondly I noticed (happend only once) a couple of messages in the xorg log :
    [ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:3 (pipe=0)
    [ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:5 (pipe=1)
    I have tried rolling back to uxa + disabling triple buffer but sadly the issue remain.
    I was not able to replicate the above messages. Here follows 2 xorg log. Maybe that someone has an idea?!
    Xorg.0.log With SNA+TripleBuffer+TearFree
    [ 41601.648]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 41601.648] X Protocol Version 11, Revision 0
    [ 41601.648] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 41601.648] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 41601.648] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 41601.649] Build Date: 09 March 2013 08:45:37AM
    [ 41601.649]
    [ 41601.649] Current version of pixman: 0.28.2
    [ 41601.649] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 41601.649] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 41601.649] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:41:47 2013
    [ 41601.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 41601.649] (==) No Layout section. Using the first Screen section.
    [ 41601.649] (==) No screen section available. Using defaults.
    [ 41601.649] (**) |-->Screen "Default Screen Section" (0)
    [ 41601.649] (**) | |-->Monitor "<default monitor>"
    [ 41601.649] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 41601.649] (**) | |-->Device "Intel Graphics"
    [ 41601.649] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 41601.649] (==) Automatically adding devices
    [ 41601.649] (==) Automatically enabling devices
    [ 41601.649] (==) Automatically adding GPU devices
    [ 41601.649] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 41601.649] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 41601.649] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 41601.649] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 41601.649] (II) Loader magic: 0x7fcc20
    [ 41601.649] (II) Module ABI versions:
    [ 41601.649] X.Org ANSI C Emulation: 0.4
    [ 41601.649] X.Org Video Driver: 13.1
    [ 41601.649] X.Org XInput driver : 18.0
    [ 41601.649] X.Org Server Extension : 7.0
    [ 41601.649] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41601.651] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 41601.651] Initializing built-in extension Generic Event Extension
    [ 41601.651] Initializing built-in extension SHAPE
    [ 41601.651] Initializing built-in extension MIT-SHM
    [ 41601.651] Initializing built-in extension XInputExtension
    [ 41601.651] Initializing built-in extension XTEST
    [ 41601.651] Initializing built-in extension BIG-REQUESTS
    [ 41601.651] Initializing built-in extension SYNC
    [ 41601.651] Initializing built-in extension XKEYBOARD
    [ 41601.651] Initializing built-in extension XC-MISC
    [ 41601.651] Initializing built-in extension SECURITY
    [ 41601.651] Initializing built-in extension XINERAMA
    [ 41601.651] Initializing built-in extension XFIXES
    [ 41601.651] Initializing built-in extension RENDER
    [ 41601.651] Initializing built-in extension RANDR
    [ 41601.651] Initializing built-in extension COMPOSITE
    [ 41601.651] Initializing built-in extension DAMAGE
    [ 41601.651] Initializing built-in extension MIT-SCREEN-SAVER
    [ 41601.651] Initializing built-in extension DOUBLE-BUFFER
    [ 41601.651] Initializing built-in extension RECORD
    [ 41601.651] Initializing built-in extension DPMS
    [ 41601.651] Initializing built-in extension X-Resource
    [ 41601.651] Initializing built-in extension XVideo
    [ 41601.651] Initializing built-in extension XVideo-MotionCompensation
    [ 41601.651] Initializing built-in extension XFree86-VidModeExtension
    [ 41601.652] Initializing built-in extension XFree86-DGA
    [ 41601.652] Initializing built-in extension XFree86-DRI
    [ 41601.653] Initializing built-in extension DRI2
    [ 41601.653] (II) LoadModule: "glx"
    [ 41601.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 41601.653] (II) Module glx: vendor="X.Org Foundation"
    [ 41601.653] compiled for 1.13.3, module version = 1.0.0
    [ 41601.653] ABI class: X.Org Server Extension, version 7.0
    [ 41601.653] (==) AIGLX enabled
    [ 41601.653] Loading extension GLX
    [ 41601.653] (II) LoadModule: "intel"
    [ 41601.654] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 41601.654] (II) Module intel: vendor="X.Org Foundation"
    [ 41601.654] compiled for 1.13.2.901, module version = 2.21.3
    [ 41601.654] Module class: X.Org Video Driver
    [ 41601.654] ABI class: X.Org Video Driver, version 13.1
    [ 41601.654] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 41601.654] (++) using VT number 1
    [ 41601.654] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 41601.654] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 41601.654] (==) intel(0): RGB weight 888
    [ 41601.654] (==) intel(0): Default visual is TrueColor
    [ 41601.654] (**) intel(0): Option "AccelMethod" "sna"
    [ 41601.654] (**) intel(0): Option "TearFree" "true"
    [ 41601.654] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 41601.655] (**) intel(0): Framebuffer tiled
    [ 41601.655] (**) intel(0): Pixmaps tiled
    [ 41601.655] (**) intel(0): "Tear free" enabled
    [ 41601.655] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 41601.655] (II) intel(0): Output LVDS1 has no monitor section
    [ 41601.655] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
    [ 41601.666] (II) intel(0): Output VGA1 has no monitor section
    [ 41601.742] (II) intel(0): Output HDMI1 has no monitor section
    [ 41601.782] (II) intel(0): Output DP1 has no monitor section
    [ 41602.035] (II) intel(0): Output HDMI2 has no monitor section
    [ 41602.049] (II) intel(0): Output HDMI3 has no monitor section
    [ 41602.089] (II) intel(0): Output DP2 has no monitor section
    [ 41602.129] (II) intel(0): Output DP3 has no monitor section
    [ 41602.129] (II) intel(0): EDID for output LVDS1
    [ 41602.129] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 41602.129] (II) intel(0): Year: 2012 Week: 0
    [ 41602.129] (II) intel(0): EDID Version: 1.4
    [ 41602.129] (II) intel(0): Digital Display Input
    [ 41602.129] (II) intel(0): 6 bits per channel
    [ 41602.129] (II) intel(0): Digital interface is undefined
    [ 41602.129] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 41602.129] (II) intel(0): Gamma: 2.20
    [ 41602.129] (II) intel(0): No DPMS capabilities specified
    [ 41602.129] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.129] (II) intel(0): First detailed timing is preferred mode
    [ 41602.129] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 41602.129] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 41602.129] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 41602.129] (II) intel(0): Manufacturer's mask: 0
    [ 41602.129] (II) intel(0): Supported detailed timing:
    [ 41602.129] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41602.129] (II) intel(0): Supported detailed timing:
    [ 41602.129] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41602.129] (II) intel(0): Unknown vendor-specific block 2
    [ 41602.129] (II) intel(0): EDID (in hex):
    [ 41602.129] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 41602.129] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 41602.129] (II) intel(0): 1d505400000001010101010101010101
    [ 41602.129] (II) intel(0): 0101010101010e1e561651000c303020
    [ 41602.129] (II) intel(0): 25000090100000190914561651000c30
    [ 41602.129] (II) intel(0): 30202500009010000019000000000000
    [ 41602.129] (II) intel(0): 00000000000000000000000000000002
    [ 41602.129] (II) intel(0): 000c4cff0a3c64100f196400000000c1
    [ 41602.129] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Printing probed modes for output LVDS1
    [ 41602.129] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41602.129] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41602.129] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 41602.129] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 41602.129] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 41602.129] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 41602.142] (II) intel(0): EDID for output VGA1
    [ 41602.218] (II) intel(0): EDID for output HDMI1
    [ 41602.218] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 74506241
    [ 41602.218] (II) intel(0): Year: 2010 Week: 47
    [ 41602.218] (II) intel(0): EDID Version: 1.3
    [ 41602.218] (II) intel(0): Digital Display Input
    [ 41602.219] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 41602.219] (II) intel(0): Gamma: 2.20
    [ 41602.219] (II) intel(0): DPMS capabilities: Off
    [ 41602.219] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.219] (II) intel(0): First detailed timing is preferred mode
    [ 41602.219] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 41602.219] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 41602.219] (II) intel(0): Supported established timings:
    [ 41602.219] (II) intel(0): 720x400@70Hz
    [ 41602.219] (II) intel(0): 640x480@60Hz
    [ 41602.219] (II) intel(0): 640x480@67Hz
    [ 41602.219] (II) intel(0): 800x600@56Hz
    [ 41602.219] (II) intel(0): 800x600@60Hz
    [ 41602.219] (II) intel(0): 1024x768@60Hz
    [ 41602.219] (II) intel(0): 1024x768@70Hz
    [ 41602.219] (II) intel(0): Manufacturer's mask: 0
    [ 41602.219] (II) intel(0): Supported standard timings:
    [ 41602.219] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 41602.219] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 41602.219] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 41602.219] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 41602.219] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 41602.219] (II) intel(0): Supported detailed timing:
    [ 41602.219] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 41602.219] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 41602.219] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 41602.219] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 41602.219] (II) intel(0): Monitor name: Acer P226HQL
    [ 41602.219] (II) intel(0): Serial No: LNJ0W0014320
    [ 41602.219] (II) intel(0): EDID (in hex):
    [ 41602.219] (II) intel(0): 00ffffffffffff000472980101e07004
    [ 41602.219] (II) intel(0): 2f14010380301b782a9535a159579f27
    [ 41602.219] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 41602.219] (II) intel(0): 010101010101023a801871382d40582c
    [ 41602.219] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 41602.219] (II) intel(0): 5311000a202020202020000000fc0041
    [ 41602.219] (II) intel(0): 636572205032323648514c0a000000ff
    [ 41602.219] (II) intel(0): 004c4e4a3057303031343332300a0059
    [ 41602.219] (II) intel(0): Printing probed modes for output HDMI1
    [ 41602.219] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 41602.219] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 41602.219] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 41602.219] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 41602.219] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 41602.219] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 41602.219] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 41602.259] (II) intel(0): EDID for output DP1
    [ 41602.512] (II) intel(0): EDID for output HDMI2
    [ 41602.512] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
    [ 41602.512] (II) intel(0): Year: 2011 Week: 19
    [ 41602.512] (II) intel(0): EDID Version: 1.3
    [ 41602.512] (II) intel(0): Digital Display Input
    [ 41602.512] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 41602.512] (II) intel(0): Gamma: 2.20
    [ 41602.512] (II) intel(0): DPMS capabilities: Off
    [ 41602.512] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.512] (II) intel(0): First detailed timing is preferred mode
    [ 41602.512] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 41602.512] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 41602.512] (II) intel(0): Supported established timings:
    [ 41602.512] (II) intel(0): 720x400@70Hz
    [ 41602.512] (II) intel(0): 640x480@60Hz
    [ 41602.512] (II) intel(0): 640x480@67Hz
    [ 41602.512] (II) intel(0): 800x600@56Hz
    [ 41602.512] (II) intel(0): 800x600@60Hz
    [ 41602.512] (II) intel(0): 1024x768@60Hz
    [ 41602.512] (II) intel(0): 1024x768@70Hz
    [ 41602.512] (II) intel(0): Manufacturer's mask: 0
    [ 41602.512] (II) intel(0): Supported standard timings:
    [ 41602.512] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 41602.512] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 41602.512] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 41602.512] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 41602.512] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 41602.512] (II) intel(0): Supported detailed timing:
    [ 41602.512] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 41602.512] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 41602.512] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 41602.512] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 41602.512] (II) intel(0): Monitor name: Acer P226HQL
    [ 41602.512] (II) intel(0): Serial No: LNJ0W0014320
    [ 41602.512] (II) intel(0): EDID (in hex):
    [ 41602.512] (II) intel(0): 00ffffffffffff00047298012b249011
    [ 41602.512] (II) intel(0): 1315010380301b782a9535a159579f27
    [ 41602.512] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 41602.512] (II) intel(0): 010101010101023a801871382d40582c
    [ 41602.512] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 41602.512] (II) intel(0): 5311000a202020202020000000fc0041
    [ 41602.512] (II) intel(0): 636572205032323648514c0a000000ff
    [ 41602.512] (II) intel(0): 004c4e4a3057303031343332300a00d9
    [ 41602.512] (II) intel(0): Printing probed modes for output HDMI2
    [ 41602.512] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 41602.512] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 41602.512] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 41602.512] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 41602.512] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 41602.513] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 41602.513] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 41602.525] (II) intel(0): EDID for output HDMI3
    [ 41602.565] (II) intel(0): EDID for output DP2
    [ 41602.605] (II) intel(0): EDID for output DP3
    [ 41602.605] (II) intel(0): Output LVDS1 connected
    [ 41602.605] (II) intel(0): Output VGA1 disconnected
    [ 41602.605] (II) intel(0): Output HDMI1 connected
    [ 41602.605] (II) intel(0): Output DP1 disconnected
    [ 41602.605] (II) intel(0): Output HDMI2 connected
    [ 41602.605] (II) intel(0): Output HDMI3 disconnected
    [ 41602.605] (II) intel(0): Output DP2 disconnected
    [ 41602.605] (II) intel(0): Output DP3 disconnected
    [ 41602.605] (II) intel(0): Using exact sizes for initial modes
    [ 41602.605] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Output HDMI1 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Output HDMI2 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 41602.605] (==) intel(0): DPI set to (96, 96)
    [ 41602.606] (II) Loading sub module "dri2"
    [ 41602.606] (II) LoadModule: "dri2"
    [ 41602.606] (II) Module "dri2" already built-in
    [ 41602.606] (==) Depth 24 pixmap format is 32 bpp
    [ 41602.606] (II) intel(0): SNA initialized with IvyBridge backend
    [ 41602.606] (==) intel(0): Backing store disabled
    [ 41602.606] (==) intel(0): Silken mouse enabled
    [ 41602.606] (II) intel(0): HW Cursor enabled
    [ 41602.606] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 41602.606] (==) intel(0): DPMS enabled
    [ 41602.606] (II) intel(0): [DRI2] Setup complete
    [ 41602.606] (II) intel(0): [DRI2] DRI driver: i965
    [ 41602.606] (II) intel(0): direct rendering: DRI2 Enabled
    [ 41602.606] (==) intel(0): hotplug detection: "enabled"
    [ 41602.606] (--) RandR disabled
    [ 41602.612] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 41602.612] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context
    [ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 41602.612] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 41602.613] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 41602.613] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 41602.613] (II) AIGLX: Loaded and initialized i965
    [ 41602.613] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 41602.613] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41602.729] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
    [ 41602.909] (II) intel(0): switch to mode 1366x768 on crtc 7 (pipe 2)
    [ 41603.090] (II) intel(0): Setting screen physical size to 361 x 203
    [ 41603.110] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 41603.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 41603.110] (II) LoadModule: "evdev"
    [ 41603.110] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 41603.110] (II) Module evdev: vendor="X.Org Foundation"
    [ 41603.110] compiled for 1.13.0, module version = 2.7.3
    [ 41603.110] Module class: X.Org XInput Driver
    [ 41603.110] ABI class: X.Org XInput driver, version 18.0
    [ 41603.110] (II) Using input driver 'evdev' for 'Power Button'
    [ 41603.110] (**) Power Button: always reports core events
    [ 41603.110] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 41603.110] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 41603.111] (--) evdev: Power Button: Found keys
    [ 41603.111] (II) evdev: Power Button: Configuring as keyboard
    [ 41603.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 41603.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 41603.111] (**) Option "xkb_rules" "evdev"
    [ 41603.111] (**) Option "xkb_model" "evdev"
    [ 41603.111] (**) Option "xkb_layout" "us"
    [ 41603.125] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 41603.125] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 41603.125] (II) Using input driver 'evdev' for 'Video Bus'
    [ 41603.125] (**) Video Bus: always reports core events
    [ 41603.125] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 41603.125] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 41603.125] (--) evdev: Video Bus: Found keys
    [ 41603.125] (II) evdev: Video Bus: Configuring as keyboard
    [ 41603.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 41603.125] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 41603.125] (**) Option "xkb_rules" "evdev"
    [ 41603.125] (**) Option "xkb_model" "evdev"
    [ 41603.125] (**) Option "xkb_layout" "us"
    [ 41603.125] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 41603.125] (II) No input driver specified, ignoring this device.
    [ 41603.125] (II) This device may have been added with another device file.
    [ 41603.125] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
    [ 41603.125] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 41603.125] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 41603.125] (**) Sleep Button: always reports core events
    [ 41603.125] (**) evdev: Sleep Button: Device: "/dev/input/event0"
    [ 41603.125] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 41603.125] (--) evdev: Sleep Button: Found keys
    [ 41603.125] (II) evdev: Sleep Button: Configuring as keyboard
    [ 41603.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
    [ 41603.126] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 41603.126] (**) Option "xkb_rules" "evdev"
    [ 41603.126] (**) Option "xkb_model" "evdev"
    [ 41603.126] (**) Option "xkb_layout" "us"
    [ 41603.126] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41603.126] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event15)
    [ 41603.126] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
    [ 41603.126] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
    [ 41603.126] (**) HP HD Webcam [Fixed]: always reports core events
    [ 41603.126] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event15"
    [ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
    [ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Found keys
    [ 41603.126] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
    [ 41603.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15/event15"
    [ 41603.126] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 9)
    [ 41603.126] (**) Option "xkb_rules" "evdev"
    [ 41603.126] (**) Option "xkb_model" "evdev"
    [ 41603.126] (**) Option "xkb_layout" "us"
    [ 41603.126] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event18)
    [ 41603.127] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 41603.127] (**) OCT KVMLite: always reports core events
    [ 41603.127] (**) evdev: OCT KVMLite: Device: "/dev/input/event18"
    [ 41603.127] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 41603.127] (--) evdev: OCT KVMLite: Found keys
    [ 41603.127] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.1/3-1.4.1.1:1.0/input/input22/event18"
    [ 41603.127] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 10)
    [ 41603.127] (**) Option "xkb_rules" "evdev"
    [ 41603.127] (**) Option "xkb_model" "evdev"
    [ 41603.127] (**) Option "xkb_layout" "us"
    [ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.0/input/input23/event19"
    [ 41603.127] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 11)
    [ 41603.127] (**) Option "xkb_rules" "evdev"
    [ 41603.127] (**) Option "xkb_model" "evdev"
    [ 41603.127] (**) Option "xkb_layout" "us"
    [ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.1/input/input24/event20"
    [ 41603.128] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 12)
    [ 41603.128] (**) Option "xkb_rules" "evdev"
    [ 41603.128] (**) Option "xkb_model" "evdev"
    [ 41603.128] (**) Option "xkb_layout" "us"
    [ 41603.128] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 41603.128] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 41603.128] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event21)
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
    [ 41603.128] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event21"
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
    [ 41603.128] (**) Option "YAxisMapping" "10 11"
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.4/3-1.4.1.4:1.0/input/input25/event21"
    [ 41603.128] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
    [ 41603.129] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event14)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
    [ 41603.130] (II) No input driver specified, ignoring this device.
    [ 41603.130] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
    [ 41603.130] (II) No input driver specified, ignoring this device.
    [ 41603.130] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [ 41603.130] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.130] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 41603.130] (**) AT Translated Set 2 keyboard: always reports core events
    [ 41603.130] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 41603.130] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
    [ 41603.130] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 41603.130] (**) Option "xkb_rules" "evdev"
    [ 41603.130] (**) Option "xkb_model" "evdev"
    [ 41603.130] (**) Option "xkb_layout" "us"
    [ 41603.130] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event16)
    [ 41603.130] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 41603.130] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 41603.130] (**) PS/2 Generic Mouse: always reports core events
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event16"
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 41603.130] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
    [ 41603.130] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 41603.130] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 41603.131] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
    [ 41603.131] (II) No input driver specified, ignoring this device.
    [ 41603.131] (II) This device may have been added with another device file.
    [ 41603.131] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 41603.131] (II) LoadModule: "synaptics"
    [ 41603.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 41603.131] (II) Module synaptics: vendor="X.Org Foundation"
    [ 41603.131] compiled for 1.13.2, module version = 1.6.3
    [ 41603.131] Module class: X.Org XInput Driver
    [ 41603.131] ABI class: X.Org XInput driver, version 18.0
    [ 41603.131] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 41603.131] (**) Option "Device" "/dev/input/event17"
    [ 41603.182] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 41603.182] (**) Option "TapButton1" "1"
    [ 41603.182] (**) Option "TapButton2" "2"
    [ 41603.182] (**) Option "TapButton3" "3"
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 41603.182] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 41603.209] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event17"
    [ 41603.209] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 41603.209] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 41603.209] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 41603.209] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
    [ 41603.209] (II) No input driver specified, ignoring this device.
    [ 41603.209] (II) This device may have been added with another device file.
    [ 41603.210] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 41603.210] (II) No input driver specified, ignoring this device.
    [ 41603.210] (II) This device may have been added with another device file.
    [ 41603.210] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
    [ 41603.210] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 41603.210] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 41603.210] (**) HP WMI hotkeys: always reports core events
    [ 41603.210] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
    [ 41603.210] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 41603.210] (--) evdev: HP WMI hotkeys: Found keys
    [ 41603.210] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 41603.210] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
    [ 41603.210] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
    [ 41603.210] (**) Option "xkb_rules" "evdev"
    [ 41603.210] (**) Option "xkb_model" "evdev"
    [ 41603.210] (**) Option "xkb_layout" "us"
    [ 41603.443] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41603.443] (II) intel(0): Printing DDC gathered Modelines:
    [ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41608.132] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41608.132] (II) intel(0): Printing DDC gathered Modelines:
    [ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41608.609] [mi] Increasing EQ size to 512 to prevent dropped events.
    [ 41608.623] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41608.623] (II) intel(0): Printing DDC gathered Modelines:
    [ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41618.875] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41618.876] (II) intel(0): Printing DDC gathered Modelines:
    [ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41619.358] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41619.386] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41619.394] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 41619.577] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
    [ 41619.841] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41619.841] (II) intel(0): Printing DDC gathered Modelines:
    [ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    Xorg.0.log With UXA+TearFree-TripleBuffer
    [ 41275.791]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 41275.791] X Protocol Version 11, Revision 0
    [ 41275.791] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 41275.791] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 41275.791] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 41275.791] Build Date: 09 March 2013 08:45:37AM
    [ 41275.791]
    [ 41275.792] Current version of pixman: 0.28.2
    [ 41275.792] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 41275.792] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 41275.792] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:36:21 2013
    [ 41275.792] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 41275.793] (==) No Layout section. Using the first Screen section.
    [ 41275.793] (==) No screen section available. Using defaults.
    [ 41275.793] (**) |-->Screen "Default Screen Section" (0)
    [ 41275.793] (**) | |-->Monitor "<default monitor>"
    [ 41275.793] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 41275.793] (**) | |-->Device "Intel Graphics"
    [ 41275.793] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 41275.793] (==) Automatically adding devices
    [ 41275.793] (==) Automatically enabling devices
    [ 41275.793] (==) Automatically adding GPU devices
    [ 41275.793] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 41275.793] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 41275.793] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 41275.793] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 41275.793] (II) Loader magic: 0x7fcc20
    [ 41275.793] (II) Module ABI versions:
    [ 41275.793] X.Org ANSI C Emulation: 0.4
    [ 41275.793] X.Org Video Driver: 13.1
    [ 41275.793] X.Org XInput driver : 18.0
    [ 41275.793] X.Org Server Extension : 7.0
    [ 41275.793] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41275.795] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 41275.795] Initializing built-in extension Generic Event Extension
    [ 41275.795] Initializing built-in extension SHAPE
    [ 41275.795] Initializing built-in extension MIT-SHM
    [ 41275.795] Initializing built-in extension XInputExtension
    [ 41275.795] Initializing built-in extension XTEST
    [ 41275.795] Initializing built-in extension BIG-REQUESTS
    [ 41275.795] Initializing built-in extension SYNC
    [ 41275.795] Initializing built-in extension XKEYBOARD
    [ 41275.795] Initializing built-in extension XC-MISC
    [ 41275.795] Initializing built-in extension SECURITY
    [ 41275.795] Initializing built-in extension XINERAMA
    [ 41275.795] Initializing built-in extension XFIXES
    [ 41275.795] Initializing built-in extension RENDER
    [ 41275.795] Initializing built-in extension RANDR
    [ 41275.795] Initializing built-in extension COMPOSITE
    [ 41275.795] Initializing built-in extension DAMAGE
    [ 41275.795] Initializing built-in extension MIT-SCREEN-SAVER
    [ 41275.795] Initializing built-in extension DOUBLE-BUFFER
    [ 41275.795] Initializing built-in extension RECORD
    [ 41275.795] Initializing built-in extension DPMS
    [ 41275.795] Initializing built-in extension X-Resource
    [ 41275.795] Initializing built-in extension XVideo
    [ 41275.795] Initializing built-in extension XVideo-MotionCompensation
    [ 41275.795] Initializing built-in extension XFree86-VidModeExtension
    [ 41275.796] Initializing built-in extension XFree86-DGA
    [ 41275.796] Initializing built-in extension XFree86-DRI
    [ 41275.797] Initializing built-in extension DRI2
    [ 41275.797] (II) LoadModule: "glx"
    [ 41275.798] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 41275.798] (II) Module glx: vendor="X.Org Foundation"
    [ 41275.798] compiled for 1.13.3, module version = 1.0.0
    [ 41275.798] ABI class: X.Org Server Extension, version 7.0
    [ 41275.798] (==) AIGLX enabled
    [ 41275.799] Loading extension GLX
    [ 41275.799] (II) LoadModule: "intel"
    [ 41275.799] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 41275.799] (II) Module intel: vendor="X.Org Foundation"
    [ 41275.799] compiled for 1.13.2.901, module version = 2.21.3
    [ 41275.799] Module class: X.Org Video Driver
    [ 41275.799] ABI class: X.Org Video Driver, version 13.1
    [ 41275.799] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 41275.800] (++) using VT number 1
    [ 41275.800] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 41275.800] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 41275.800] (==) intel(0): RGB weight 888
    [ 41275.800] (==) intel(0): Default visual is TrueColor
    [ 41275.800] (**) intel(0): Option "AccelMethod" "uxa"
    [ 41275.800] (**) intel(0): Option "TripleBuffer" "false"
    [ 41275.800] (**) intel(0): Option "TearFree" "true"
    [ 41275.800] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 41275.800] (**) intel(0): Relaxed fencing enabled
    [ 41275.800] (**) intel(0): Wait on SwapBuffers? enabled
    [ 41275.800] (**) intel(0): Triple buffering? disabled
    [ 41275.800] (**) intel(0): Framebuffer tiled
    [ 41275.800] (**) intel(0): Pixmaps tiled
    [ 41275.800] (**) intel(0): 3D buffers tiled
    [ 41275.800] (**) intel(0): SwapBuffers wait enabled
    [ 41275.800] (==) intel(0): video overlay key set to 0x101fe
    [ 41275.800] (II) intel(0): Output LVDS1 has no monitor section
    [ 41275.800] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
    [ 41275.812] (II) intel(0): Output VGA1 has no monitor section
    [ 41275.889] (II) intel(0): Output HDMI1 has no monitor section
    [ 41275.929] (II) intel(0): Output DP1 has no monitor section
    [ 41276.182] (II) intel(0): Output HDMI2 has no monitor section
    [ 41276.195] (II) intel(0): Output HDMI3 has no monitor section
    [ 41276.235] (II) intel(0): Output DP2 has no monitor section
    [ 41276.275] (II) intel(0): Output DP3 has no monitor section
    [ 41276.275] (II) intel(0): EDID for output LVDS1
    [ 41276.276] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 41276.276] (II) intel(0): Year: 2012 Week: 0
    [ 41276.276] (II) intel(0): EDID Version: 1.4
    [ 41276.276] (II) intel(0): Digital Display Input
    [ 41276.276] (II) intel(0): 6 bits per channel
    [ 41276.276] (II) intel(0): Digital interface is undefined
    [ 41276.276] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 41276.276] (II) intel(0): Gamma: 2.20
    [ 41276.276] (II) intel(0): No DPMS capabilities specified
    [ 41276.276] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41276.276] (II) intel(0): First detailed timing is preferred mode
    [ 41276.276] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 41276.276] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 41276.276] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 41276.276] (II) intel(0): Manufacturer's mask: 0
    [ 41276.276] (II) intel(0): Supported detailed timing:
    [ 41276.276] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41276.276] (II) intel(0): Supported detailed timing:
    [ 41276.276] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41276.276] (II) intel(0): Unknown vendor-specific block 2
    [ 41276.276] (II) intel(0): EDID (in hex):
    [ 41276.276] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 41276.276] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 41276.276] (II) intel(0): 1d505400000001010101010101010101
    [ 41276.276] (II) intel(0): 0101010101010e1e561651000c303020
    [ 41276.276] (II) intel(0): 25000090100000190914561651000c30
    [ 41276.276] (II) intel(0): 30202500009010000019000000000000
    [ 41276.276] (II) intel(0): 00000000000000000000000000000002
    [ 41276.276] (II) intel(0): 000c4cff0a

  • Mac Mini G4 refuses to sleep due to KVM switcher

    I have a KVM switcher + powered USB hub hooked up between my Mac Mini G4 and a PC- while the PC is able to enter standby mode, my Mac always wakes up within 3 seconds of entering sleep mode. Belkin tech support said this is due to the Mac receiving USB signals (albeit me not moving the mouse, touching the keyboard, etc), and told me to ask Apple how to disable this feature.
    Ideally, I'd like the computer only to wake up from a keyboard signal, but the powered hub might be making that unfeasible. However, I'm okay with taking the Mac out of sleep mode by pressing the button on its back.
    Can anyone tell me how to fix this (as my LCD monitor's output is beginning to suffer)?
    Thanks,
    Jamie

    Hi, Jamie. Welcome to the Discussions.
    1. You wrote: "I have a KVM switcher + powered USB hub"It's unclear if you mean:
    a. Two separate peripheral devices, i.e. KVM switchbox and a powered USB hub.
    b. One peripheral device that performs both functions.1.1. Which is it, (a) or (b)?
    1.2. If (b), is the USB hub is connected to each computer, or the KVM switchbox? If the former, try the latter. Don't connect the same USB hub directly two two computers2. You wrote: "Belkin tech support said this is due to the Mac receiving USB signals (albeit me not moving the mouse, touching the keyboard, etc), and told me to ask Apple how to disable this feature."If you make any change to USB devices (power them on or off, connect or disconnect them) on a USB chain that connects to the Mac, then the Mac will wake.
    This feature cannot be disabled: it is a function of the circuitry.
    If you look at the "USB Ports" section of the "Devices and Ports" chapter of the Mac Mini G4 Developer Note, in the subsection entitled "USB Features" you will see:"Wake Up From Sleep
    USB devices can provide a remote wakeup function for the computer. The USB root hub in the computer is set to support remote wakeup whenever a device is attached to or disconnected from the bus. The keyboard that comes with the computer uses this method to wake the computer on a key press.
    Connect and Resume
    The Intrepid ASIC contains special circuitry that allows the computer to wake from sleep mode on connect, disconnect, and resume events. Compatible USB devices should support the USB-suspend mode defined in the USB specification."Therefore, if you put your Mini to sleep, then connect, disconnect, power-on, or power-off a USB device on any USB chain connected to the Mini, the Mini will wake.
    3. It may also be that either the KVM switchbox or USB Hub (whether alone or a combined device) could be defective. I one had a similar problem where I'd put one of my Macs to sleep and it would wake immediately. Turned out to be a bad Belkin USB hub. Removing the hub restored normal sleep function.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • KVM switch w/ usb i/o for keyboard mouse doesn't work [Solved]

    Edit:
    This problem appears to have magically disapeared.  I'm still not sure why it happened or why it has ceased.
    Hello Everybody,
    I'm not sure why this is happening, but I've got a KVM switch that used to get "automagically" detected as "a no-brand KVM switch" on boot-up that has ceased working.  I don't get this "no brand KVM switch" detected on boot-up anymore, but I can use the VGA part of the switch, at least, however the keyboard and mouse don't work unless plugged directly into the computer. 
    Below I've attached the result of
    dmesg | grep --context=3 usb
    dmesg | grep kvm
    returns no result.
    The most signifcant thing seems to be:
    usb 1-2: new full speed USB device using uhci_hcd and address 7
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 8
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 9
    usb 1-2: device not accepting address 9, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 10
    usb 1-2: device not accepting address 10, error -71
    hub 1-0:1.0: unable to enumerate USB device on port 2
    I've googled this, and somewhere it was suggested this mean the usb device is not drawing power.  The only thing that has happened that I can imagine as being the culprit between function/dysfunction here is that there was a power outage (circuit breaker tripped), and though my computers were on battery-backup, the monitor is not.  I don't suppose that this could have messed up the switch?
    Note this problem is uniform across 3 computers, 2 which have recently run a system update, but the 3rd has not recently run an update, this is not an Xorg problem, "K and M" don't work in either console or X.
    Any help would be appreciated.  Below as, mentioned previously, is the output of
    dmesg | grep --context=3 usb
    included on the off-chance that someone sees something significant there.
    ata1.00: configured for UDMA/100
    ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, GW02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B GW02 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    huhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    usb 1-2: device descriptor read/64, error -71
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    hub 1-0:1.0: unable to enumerate USB device on port 2
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-2: new full speed USB device using uhci_hcd and address 3
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 4
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 5
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    usb 1-2: device not accepting address 5, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 6
    usb 1-2: device not accepting address 6, error -71
    hub 1-0:1.0: unable to enumerate USB device on port 2
    usb 3-2: new low speed USB device using uhci_hcd and address 2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e100 0000:01:08.0: PME# disabled
    e100: eth0: e100_probe: addr 0xff8fe000, irq 20, MAC addr 00:07:e9:50:88:58
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    usb 3-2: configuration #1 chosen from 1 choice
    Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Intel ICH 0000:00:1f.5: setting latency timer to 64
    usbcore: registered new interface driver hiddev
    input: Logitech USB Optical Mouse as /class/input/input2
    input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    intel8x0_measure_ac97_clock: measured 50831 usecs
    intel8x0: clocking to 48000
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input4
    reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
    X:2394 freeing invalid memtype f0000000-f8000000
    X:2367 conflicting memory types f0000000-f8000000 write-combining<->uncached-minus
    reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
    X:2395 freeing invalid memtype f0000000-f8000000
    usb 1-2: new full speed USB device using uhci_hcd and address 7
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 8
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: device descriptor read/64, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 9
    usb 1-2: device not accepting address 9, error -71
    usb 1-2: new full speed USB device using uhci_hcd and address 10
    usb 1-2: device not accepting address 10, error -71
    hub 1-0:1.0: unable to enumerate USB device on port 2
    Thanks again!
    Last edited by pseudonomous (2008-12-30 23:57:47)

    i'm sorry, but this is all software related then. if you haven't already, run disk utility a few times to try to correct the error. otherwise, you should back up your info immediately if you can. if you can access another mac you can do that with firewire target disk mode. http://docs.info.apple.com/article.html?artnum=58583. the other mac has to have built-in firewire. then you can try to repair the directory with a third party utility like diskwarrior or techtool pro. if it cannot solve the problem, or if you do not want to spend the money on the software, you have no choice but to erase and install your operating system. do you already have your info backed up?? it's always a good idea. keep us posted as to how it's going for you or if you have any further questions. [ 8 ) ]

  • MacBook Pro 15" won't see DVI display behind KVM switch

    I have a Gefen single-link DVI switch connected to a 24-inch Dell display. My MacBook Pro will detect the display if I connect it directly to the MacBook Pro's Mini DisplayPort to DVI adapter, but if the KVM switch comes in Detect Displays finds nothing.
    Is anyone else able to get their MacBook Pro involved with a KVM switch?

    Turns out the cable I was using had pin 16 pulled out on it (for most of our systems using DVI KVM switches this was a good idea). I connected a full DVI cable and then MacBook Pro saw the display.
    Then came the problem that when switching AWAY from the MacBook Pro the MBP would act like the display was disconnected, reconfiguring itself to go back to its built-in display only. So then I connected a Gefen DVI Detective between the MBP and the switch and then the MBP would behave as desired, still "seeing" the display even while I was switched away from it.

  • KVM switch one Cinema hd display (dvi) with macpro (dvi) and macbook pro (mini displayport)

    I want to use a KVM switch to share one display with two computers.
    Computer one is: MacPro 1,1 dual core 2.66 Ghz with two DVI ports.
    Computer two is: MacBook Pro 4 core 2.66 GHz with one Mini Displayport.
    Display is: Cinema HD Display with DVI connector.
    To do that KVM switches only use (at least that is waht I found) one system either DVI or Mini Displayports
    http://www.gefen.com/kvm/dproduct.jsp?prod_id=3113
    DVI --> KVM SWITCH<-- DVI
                         V
                   DVI (monitor)
    http://www.atlona.com/Atlona-2x1-Mini-DisplayPort-KVM-Switch.html
    Mini Displayport (Macpro) --> KVM SWITCH <-- Mini Displayport (Macbookpro)
                                                             V
                                                     DVI (monitor)
    However what I want is:
    DVI (Macpro) --> KVM SWITHCH<-- Mini Displayport (Macbookpro)
                                           V
                                  DVI(monitor)
    I couldn't find an existing KVM switcher that does this.
    Then there is the following solution
    DVI (Macpro) --> KVM SWITCH <-- ADAPTER (Mini Displayport to DVI) <-- Mini Displayport (Macbookpro)
                                        V
                                DVI(monitor)
    The question is: Will this work?
    I've been told that adapter behind adapter never works. Hope someone can help with this before spending money on nothing.
    Thanx David

    Maybe you're right just try and see if I can return the stuff if it's not working.
    I won't be using a higher resolution then 1920 x 1200 however I still would buy the adapter
    Mini DisplayPort to Dual-Link DVI Adapter
    http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA3Ng
    for connecting macbookpro to KVM DVI switch.
    However if there's still someone with experiencing the exact same thing I would be much obliged.

  • Belkin Flip KVM Switch and Blue Screen

    G5 Dual 2ghz, clean install of Leopard.
    I have a dual head video card, attached to the DVI port is a 22" monitor connected via DVI, on the ADC port I have ADC to VGA adaptor which a Belkin "Flip" KVM switch is attached, leading to a 17" monitor.
    On booting I get to the point when the Finder should be loading and get a blue screen on both monitors, the monitors both periodically do a fade from black as though the system has just tried to change video resolution. However this loop continues.
    If I remove the KVM and have the 17" plugged in, boot up is fine. This set up worked fine with 10.4x.
    Any suggestions.
    Thanks

    Zork, have you cracked this problem yet?
    I have a similar item - Belkin's Switch2 for Mac mini - and I get the same halting at the blue screen. Belkin UK's 2nd line support failed to replicate this error and replaced my device with the one that they used. It failed as well on my system (which works fine without the Switch2!).
    In case it helps, a dig in the logs showed the following fault repeating itself presumably while the screen stayed blue:
    (starts 6 lines down, I think)
    01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
    01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxUSB.kext
    01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
    01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxNetFlt.kext
    01/05/2009 10:12:25 kernel vboxdrv: fAsync=0 offMin=0x1230 offMax=0x39450
    01/05/2009 10:12:25 kernel VBoxDrv: version 2.1.4 r42893; IOCtl version 0xa0009; IDC version 0x10000; dev major=18
    01/05/2009 10:12:25 ReportCrash[110] Formulating crash report for process WindowServer[68]
    01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
    01/05/2009 10:12:26 com.apple.launchd[1] (com.apple.WindowServer[68]) Exited abnormally: Floating point exception
    01/05/2009 10:12:26 kernel VBoxFltDrv: version 2.1.4 r42893
    01/05/2009 10:12:27 kernel AirPort: Link Up on en1
    01/05/2009 10:12:28 ReportCrash[110] Formulating crash report for process WindowServer[116]
    01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer[116]) Exited abnormally: Floating point exception
    01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer) Throttling respawn: Will start in 9 seconds
    01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101214GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
    01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101227GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
    01/05/2009 10:12:38 ReportCrash[121] Formulating crash report for process WindowServer[120]
    ...and repeats it every 9-10 seconds.
    Do/did you get this as well?
    Can anybody comment on what is going on, please?

  • DVI KVM Switch Suggestions

    Hi I would like to use a DVI KVM switch because having problems with the VGA ones... does anyone recommend a brand/model that works with the mini and a PC?

    I had two things I wanted to achieve with a KVM, and they tax most KVM switches. The one I have now works great. The one I am happy with is this one from Addlogix:
    http://www.neutronexpress.com/prod.cfm/322180/ADDLOGIX/KVM-201DVU It is old other places but when last I looked it was cheapest here, at ~ $190, including cables.
    What it does that is "above and beyond":
    1. It is DVI, rather than USB. My PC and monitor were already DVI. It works great, and up to 1900x1200 or so. Not all DVI KVM switches actually work well.
    2. It works great with my wireless Logitech MX mouse/keyboard combo, which doesn't play well with most/many KVMs.

  • DVI KVM Switch??

    Hi,
    I have a G5 running tiger (soon to be running leopard hopefully) with a DVI cinema display.
    I have a PC that I use for testing my work on the Web. I was able to switch back and forth easily with a Belkin KVM switch back when I was using a VGA monitor. But I can't seem to find a KVM switch that works with my current setup.
    Any suggestions?
    Cheers!

    Would this model work for me?
    http://cgi.ebay.com/ATEN-2-port-USB-DVI-KVM-Switch-w-USB-HUB-CS-1762-New_W0QQite mZ200007236312QQcmdZViewItem

  • DVI KVM switch to use with iMac and Cinema Display

    I currently have a 20" iMac that I use with a 20" Cinema Display. I'd like to share the Cinema display between the iMac and a Dell computer. Assuming this can be done, are there any recommendations for a DVI-KVM switch? Most important is no loss in video quality when the Cinema display is used with the iMac. The Dell is seldom used and even a straight DVI switch without mouse and keyboard sharing would be OK.
     20" Intel iMac + Cinema Display + Sony HDR-HC7 HD camera   Mac OS X (10.4.8)   All tools, no talent!

    I am also trying to link a Mac Mini and a HP PC with an nVidia FX5500 graphics card via a KVM switch. The mini works fine but the PC does not sync up and the screen is blank and the little white light on the lower right is blinking.
    Any news on your question would be appreciated
    mac mini Intel dual core   Mac OS X (10.4.6)  

  • T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

    Hi,
    I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
    to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
    monitor, when connected via the KVM switch.
    I tried:
    A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
    B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
    C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
    D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
    So I have a workaround, but leaving out the KVM switch is not a long term option.
    This is all on Win 7 professional / 64bit
    Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
    SURPRISE: during driver install, the monitor WAS detected!!!
    SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
    CONCLUSION:
    Seems like a software issue with the Intel HD Graphice driver.
    ANY HINT/COMMENT/HELP highly appreciated!
    Thanks,
    Michael

    hey mgold,
    as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
    I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Problems Usingt External VGA Monitor Through KVM Switch

    I have my ThinkPad x201 connected to a KVM switch along with three other machines.  The KVM is attached to a monitor with a resolution of 1920x1200. 
    Does the ThinkPad have to be rebooted with the KVM switch attached to the VGA port and with the switch set to the THnkPad?
    I plug in the VGA connector with the KVM switch set to the ThinkPad.  I then press fn-F7 and get four choses: Computer Only, Duplicate, Extend and Projector Only.  I only want to display on the external monitor but Projector Only does not seem to be the correct choice although it does switch to the monitor it also puts up a message box saying the projector was not found.  When I go to change the resolution I am offen limited to 1680 x 1050.  Other times I can set it to 1900 x 1200.
    When I switch the KVM to another machine I hear a tone from the ThinkPad that indicates something has changed.  Then when I switch the KVM back to the ThinkPad I briefly see the display on the monitor at a lower resolution and then the monitor goes dark and the ThinkPad screen lights up.
    I have also tried Extend mode with the output set to go only to the monitor.  Again, if I switch the KVM away from the ThinkPad I hear a tone from the ThinkPad.  When I switch the KVM back to the ThinkPad I again briefly see the display on the monitor at a lower resoulution and the the monitor goes blank and the ThinkPad's display lights up.
    Is there a way around this behavior that will stop the ThinkPad from switching its output or can an external monitor only be used if it is directly connected to the ThinkPad?

    I am also having the same problem with a ThinkPad T420s and a Trendnet TK-409 KVM. This KVM has worked for so many other laptops and desktops, I find it difficult to believe the ThinkPad would not work with a KVM - particularly this one. Any suggestions and help would be highly appreciated. Thank you.

Maybe you are looking for

  • MSA 4.0 SP8 : Campaign description not updated in real time while saving?

    with reference to this thread : refresh/update a list , I prefered creating my own instead of upping the older one So the problem deals with data refreshing, or data updating into the objects : When creating a campaign, after saving, the campaign des

  • Change incoterms for delivery at creation of return purchase order

    Hi all, When we create a PO with a return item we always create a delivery to post the goods issue. Therefore we've to create a customer from the vendor master record. In the customer master record the incoterms are defined. But sometimes the incoter

  • Given up on v20z power management

    Well, I tried almost everything I could and neither Sun nor AMD could provide me with a solution to power management on the dual Opteron 248 v20z machine that I have here. I'm now left with two solutions 1) remove a CPU (that'll drop the idle power d

  • Grouping albums by artist

    Does anyone know how to group songs by album, and then by artist. Essentially I say this because of compilations. Generally I like to keep things sorted by artist. The only problem with this is the fact that I have several compilations, so sorting by

  • Installing JDK 5.0 update 11 in Solaris (sparcv9 � 64bit)

    I have downloaded the self extracting instillation of JDK 1.5.0_11 (jdk-1_5_0_11-solaris-sparcv9.sh) in to my windows machine and then copied the file to the Solaris box. While running the file, I am getting the following error. Do you agree to the a