L'affichage "synthétique" du fil des messages ne fonctionne pas pour certains fils et seulement dans le dossier Courrier entrant (Dossiers unifiés).

Bonjour,
J'ai configuré Thunderbird pour un affichage avec Discussions groupées. Le regroupement des messages fonctionne bien: j'obtiens la petite flèche vers la droite qui me permet de développer le fil.
Le problème, c'est que l'affichage "synthèse" du fil ne s'affiche plus lorsque le fil est fermé. Ce problème me prive également de la possibilité d'archiver l'ensemble des messages du fil en un seul clic.
Curieusement, ce problème n'intervient que pour un seul de mes contacts et seulement dans le folder "Courrier entrant"; dès que les messages du fil sont archivés, l'affichage "synthèse" fonctionne normalement dans le folder "Archives".
Je précise que le contact en question fait l'objet d'un ou plusieurs filtres à l'entrée des messages.
Merci d'avance,
Gérard Degrève

C'est un sujet complexe et technique. Je vous suggère fortement d'utiliser le forum de la langue française. Lien ci-dessous. Google translate sera tout simplement pas assez précis.
[http://forums.mozfr.org/viewforum.php?f=4 Geckozone]

Similar Messages

  • Depuis que j ai téléchargé ios 6 je reçois des messages d un inconnu (sans numéro) avec seulement une bulle ( comme dans une BD) sans texte ; frequence des messages : environ 20/jour à toute heure

    depuis que j ai téléchargé ios 6 je reçois des messages d un inconnu (sans numéro) avec seulement une bulle ( comme dans une BD) sans texte ; frequence des messages : environ 20/jour à toute heure

    Bonjour,
    Voici la solution à ton problème :
    1) Désactiver le WIFI sur le tél
    2)Aller dans safari et taper l'adresse : wap.sfr.net
    Ca ouvre la page SFR Vodafone Live
    3)Dans la barre rouge à côté du logo Accueil, appuyer sur le logo avec l'@ et la petite enveloppe (le second)
    4)aller sur "Mes Mails"
    5) aller tout en bas de la page sur "Page d'Accueil"
    6) aller sur Alertes Texto (dans Mes Infos)
    Sur la page est inscrit : L'alerte Texto est actuellement activée
    7) choisir "Désactiver"
    8) redémarrer l'iPhone
    Et voilà normalement de quoi dormir une nuit sans être réveillé toutes les deux heures !!!!

  • FaceTime et Messages ne fonctionne pas sous Mavericks

    Depuis l'installation de OS X Mavericks, FaceTime et Messages ne fonctionne plus.
    Le message d'erreur "connexion impossible" apparaît.
    Merci

    Si vous utilisez une application tierce, n'hésitez pas à jeter un œil à l'application officielle Adobe Reader qui me semble proposer cette fonctionnalité.
    Si c'était déjà le cas, le panneau des nouveautés, indique certains soucis comme "en cours" de résolution.
    D'ici là, n'hésitez pas à poser la question sur le formulaire de demande de fonctions ou directement sur le forum acrobat.

  • File Error Message keeps popping up "the specified file is locked"

    that is the message I get when I attempt to save or exit a project in fcp-- to my knowledge I have not done anything to lock a file or anything out of the ordinary--tnx in advance

    It's nothing to do with whether you locked tracks in the Timeline.
    Right click the project file and choose Get Info.
    Do you see a check mark in the Locked section?
    Example:

  • Spotlight does not find files with "_" (underscores), but only for certain file types

    Hey Folks,
    this is strange, maybe someone has an idea.
    I already searched the internet for a while, nothing found so far.
    I have a file "calc_mean.m" on my desktop.
    When I type "calc" in spotlight, it shows the file.
    But when I type "calc_" it suddenly does not show the file anymore. Nor does find the file, when I enter "calc_mean.m" in spotlight.
    When I enter "calc mean.m" in spotlight, it finds it (using space instead of the underscore).
    Now comes the real surprise:
    When I rename the file to "calc_mean.txt", spotlight suddenly DOES find the file when entering "calc_mean.txt".
    I recreated this "feature" with other files, copying and renaming ".txt" files to ".m" files, and if there's a underscore in the file, spotlight wont find it.
    Playing around a bit more, it seems spotlight does find files with underscore when they are documents, at least it works for the following extensions:
    .pdf
    .doc
    .txt
    .xls
    But these extensions for example do not work:
    .mp3
    .m
    .k
    .a
    .ka
    (and other random endings I tried).
    I am pretty confused. Sure it's no big deal learning to search for files that include underscores in their name using space instead. But I'm still quite puzzled. Any idea?

    All of those have meaning in various database search syntax (not sure if it matters).
    _ usually means any character.
    % usually means any run of characters.
    - is often used to negate what comes next, i.e. "don't include results that have the following text."
    I don't see any problem on my Mac, though.
    I also don't have any problem finding file names with those accented characters using Spotlight. I would suggest reindexing Spotlight, but if cmd-f finds them, I'm not sure that would help.
    Spotlight: How to re-index folders or volumes

  • File de message

    bonjour,
    je souhaite utiliser les commandes de files de messages, notification...(voir schema ci-joint) avec des variables de type long.Pouvez vous m expliquer comment proceder simplement en gardant l' ensemble de mes commandes.
    TheGame
    Attachments:
    threadcommunication.bmp ‏2138 KB

    Tu peux faire un typecast de ta donnée U32 avant de l'envoyer en chaîne et puis à la réception fire un typecast vers U32.
    Message Edité par Jean-Pierre Drolet le 08-08-2005 04:40 PM
    LabVIEW, C'est LabVIEW
    Attachments:
    typecastmsgqueue.gif ‏3 KB

  • Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

    Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
    Please help

    Wait a second, Photoshop can make lattes now?  Personally I prefer my coffee black, but man have I been under-utilizing this program.

  • "Unable to Check Out File Error" Message

    I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
    Thank you!

    I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

  • "Unable to open project file" Error Message

    I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

    In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
    - only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
    - was consistent in FCE 3.x, not so in FCE 4
    I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
    Now I only import .tif or .png images when I need transparency
    Piero

  • Error reading/writing file message when opening garageband and/or files

    I've been recently getting this message when I open garageband and files
    "Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
    I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
    not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
    and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.

    i give up with this discussion forum no no one knows anything

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Trying to backup one of my iPhoto libraries I keep getting a error message that basically says that the file could not be backed up because there is another file on the external drive with the same name, etc. There is no other file.

    While trying to copy one of my iPhoto libraries to an external hard drive I get the following error message "You can’t copy “iPhoto Library old” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." There is no other file on the external drive with this name. I have asked this question before and was told that there are some duplicate photos (files) in my library and I needed to go to "show file contents" and look at certain files to find duplicates and delete the duplicates. I did all of this and the library will still not copy and always stops copying in the exact same place on each attempt. Any help would be greatly appreciated.

    You've been deleting your actual Photos.
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Best way forward now is to recover the surviving Originals from this library and start over from scratch.
    Regards
    TD

  • My home page is google and it works but when I open a new tab it displays an error message :Firefox can't find the file at chrome://quick_start/content/index.ht

    I've made sure a dozen times that my home page is set correctly, and when I hit the home button next to the search bar it works and takes me right to google BUT whenever i open a new tab i get the error that my page cannot load and the web url that it keeps trying to remember is in the error message:
    Firefox can't find the file at chrome://quick_start/content/index.html.
    of course the last dot is not the url anymore but the end of the sentence for the error message, but i don't ever use chrome ever on my laptop only my cell so what is going on????? help fix god please!!!!!!

    Do you have the FastStart extension?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

    I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

    Are you installing from the official site? http://www.mozilla.com/firefox
    If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
    If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware : http://www.superantispyware.com/

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

Maybe you are looking for

  • Changes to [No Paragraph Style] causing unwanted style overrides

    Hi fellow InDesigners I'm using InDesign CS6. I'm working with long documents that were originally created in previous versions (CS4 and possibly earlier). My standard workflow for these jobs is to do the bulk of the text formatting in a newly create

  • Network at Home

    This may be the simplest question but I hope I can get some help. I will put it in very simple terms as well. I have one of the new iMac's 10.5.3 and my wife has a powerbook G4 with Tiger. On the Leopard video they showed how you can access other sha

  • I need to install Rosetta.

    I need to install Rosetta but when the dialog box comes up and i click install, it does not install and insted stays the same. I don't have the disk so how can i install it?

  • Submit Buttons

    Do anyone know how can we create a submit button that people can submit the form to us in pdf format? I don't want it to separate the data, just the form with data as one document. I tried the email button, but it didn't send anything to the specifie

  • Is there a command on Windows to install the latest version of software?

    yum can install the latest version of software on Linux system, I am wondering whether there is a similar command on Windows platform?