L3 Cache Always Disabled after Boot

Hi
I hope someone can help.
Basically I have only noticed this in the last few days. I had thought a few of my audio applications were showing more cpu use and thought I was losing the plot.
But when I check in the preferences - processor, the 1MB L3 Cache always shows disabled. At first I thought my hardware had broke but I can enable it if I go into the preferences and manually do this. But I have to do this everytime I start up ..this never happened before, how do I get it to stick?
I have checked the cache is working correctly and all reports were good.
I dunno what to do now..Please Help.
Thanks
Daryl

Its just happened again..I've managed to figure out whats causing the problem but not why its happening (10.4.7)
The power management in osx has started acting up . I think its OSX 10.4.7 broken something, because its just started happening since then (hardware tests ok).
The battery is alive but it stops getting charged, L3 cache gets disabled (reduced mode) and the battery meter keeps trying to calculate and is stuck wasting cpu cycles.Performance has gone out of the window.I am doing audio work so noticed straight away and just thought ... not again.
Apple fix this please. 10.4.7 seems to have some serious issues (I've been lucky up until now)

Similar Messages

  • WiFi is always disabled after period of inactivity

    When my ZTE One (orange) sits idle for a while, WiFi is always disabled when I wake up the phone. I re-enable WiFi & everything is fine, but I shouldn't have to do that each time.

    Hi!
    If the signal strength is not powerful enough to receive a connection for a period of time the Wi-Fi will disconnect and eventually disable itself. <br> Although, if there is a Wi-Fi network recognized but the phone is inactive the phone will disconnect and this is to save you battery power, but once you wake the phone, the phone should automatically connect back to Wi-Fi if the network is in range and if the signal is good.
    Should you have any more questions regarding this, please feel free to ask.
    Thanks!
    -Andrew

  • Preferences window always opens after boot.

    After working on my new iMac for a couple of days, I now notice that every time I switch on the Mac, when it presents the desktop, it always opens the preferences window.
    This doesn't happen after the Mac is simply woken from sleep.
    It's not a big deal, but maybe it's an indication that something needs my attention.
    Thanks,
    Rob

    Rob, you'll love your Mac even more the better you get to know it. And if you have any issues just post them. There are lot's of knowledgeable people in these forums who can help you.
    Have fun!
    <post edited by host>

  • IMac G5 fan always at maximum speed after booting into si...

    IMac G5 fan always at maximum speed after booting into single-user mode in 10.4.3
    Model: 1.6GHz iMac G5 with 10.4.3
    I updated my iMac to 10.4.3, then booted into single-user mode to do some cleaning at the command-line level. I know, as others have discovered, that in single-user mode, the thermal control is off, so the fan gradually increases up to maximum speed and stays there until you reboot or go into multi-user mode. Well, I have never experienced this one before, and I'm freaking out about it... I went into single-user mood one reboot after upgrading to 10.4.3, and after all the println white text lines ended, the [1] fan shot up to maximum speed in 0.35 seconds (it sounded like a high-pitched DJ record scratch during the time interval), [2] the fan stayed at maximum speed when I left single-user mode, and [3] I cannot get the fan to slow itself! I rebooted, shut down, and even tried booting off the Tiger CD, but the instant I hit the power button to turn on the iMac, the fans blast up to maximum speed. They shut down when I put the iMac to Sleep, but then they blast up again in full when it wakes up. I checked my settings in the Energy Saver preference pane, and I have the performance set to "Reduced," which is the lowest possible.
    I searched to see if anyone else had this problem or if the KBase had any info, but I didn't see any. I'm thinking about erasing and installing my stuff on the iMac, even though I just did that today.
    Again, this maximum speed fan problem is freaking me out. It just started when I booted into single-user mode in OS X 10.4.3. I have booted into single-user mode before (10.4.2) and have not experienced this fan issue. I repeat, the fans blast up to maximum speed after pressing the power switch to turn on the computer, so they do not even wait for the Apple logo to show up on the screen before blasting away. How can I get these fans to not do this anymore?!

    for the last few months my 20" 1.8GHz Imac has been very noisy - fans seem to run constantly and noisily. It might have been when updating to Tiger but I was never sure. Today, on the advice of a chat tech, I opened the case and reset the SMU to hopefully cure another problem. I noticed that all the air vents, intake and expel ones, were all quite heavily clogged up - not blocked but clogged with dust and fluff. I cleared it away mainly by blowing but also with a hand held hoover held close by. The exposed fan still as a lot of muck on it but greatly reduced and all the vents are completely clear. Having put everything back together again the iMac has been runnning quietly all day. May have been the SMU reset but equally might just be that the computer couldn'tdraw in cool air, circulate it or expel it properly and the fans had to work overtime to cope. Worth checking if you have noisy fans running at speed constantly.

  • RMBP13 (2013) 16GB: Always 12GB only after booting..

    I got a MacBook Pro 13' with Retina display (2013) and 16gb of memory RAM.
    However, after booting/reboot/restart the memory nevers has 16gb. It runs with 12gb only (displayed by "clean memory" app).
    Why is that? What is the 4gb gone for? How can I find out? How to fix it?
    Thanks for quick response.

    1) The clean memory app is useless and interferes with OSX's memory management.
    2) Download this program, run it, and post the output in your reply:
    Etresoft: EtreCheck

  • My USB mouse doesn't always start at boot.

    After updating from Arch 0.7.1 to 0.8, one of the big pile of bugs I had was that my USB mouse doesn't always start at boot. In fact, when I start the computer, the red LED in the mouse lights up but sometimes it switches off after the menu where I can choose to use Arch linux or .. Arch linux.
    So, the mouse switches off before I startx one time on two. When it happens I just deplug and replug it but I hate to do that.
    Need some help.

    dmesg when the mouse isn't working :
    $ dmesg
    Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease)
    ) #1 SMP PREEMPT Thu Jan 11 20:08:17 CET 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
    BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    248MB LOWMEM available.
    Entering add_active_range(0, 0, 63488) 0 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      Normal       4096 ->    63488
      HighMem     63488 ->    63488
    early_node_map[1] active PFN ranges
        0:        0 ->    63488
    On node 0 totalpages: 63488
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 4064 pages, LIFO batch:0
      Normal zone: 464 pages used for memmap
      Normal zone: 58928 pages, LIFO batch:15
      HighMem zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP (v000 COMPAQ                                ) @ 0x000ec010
    ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503  0x00000000) @ 0x000ec080
    ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503  0x00000000) @ 0x000ec0cc
    ACPI: SSDT (v001 COMPAQ HAWA7K3  0x00000001 MSFT 0x0100000c) @ 0x000ec223
    ACPI: DSDT (v001 COMPAQ DSDTTBL  0x00000001 MSFT 0x0100000c) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xee08
    Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
    Detected 901.637 MHz processor.
    Built 1 zonelists.  Total pages: 62992
    Kernel command line: root=/dev/hda3 ro earlymodules=piix
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (011fa000)
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 4096 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data,
    260k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xd0000000 - 0xff7fe000   ( 759 MB)
        lowmem  : 0xc0000000 - 0xcf800000   ( 248 MB)
          .init : 0xc0405000 - 0xc0446000   ( 260 kB)
          .data : 0xc0346806 - 0xc03fe64c   ( 735 kB)
          .text : 0xc0100000 - 0xc0346806   (2330 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
    00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 0000000
    0 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 12k freed
    checking if image is initramfs... it is
    Freeing initrd memory: 501k freed
    ACPI: Core revision 20060707
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    ACPI: setting ELCR to 0200 (from 0c28)
    CPU0: AMD Duron(tm) Processor stepping 01
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [_SB_.PCI0] bus is 0
    PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
    PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
    pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
    PCI: Bridge: 0000:00:01.0
      IO window: disabled.
      MEM window: 80000000-800fffff
      PREFETCH window: 88000000-8fffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 98304 bytes)
    TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
    TCP: Hash tables configured (established 8192 bind 4096)
    TCP reno registered
    apm: BIOS not found.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI: Disabling Via external APIC routing
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PBTN]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
    PCI: setting IRQ 3 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
    3
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: loaded (max 8 devices)
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 260k freed
    Time: tsc clocksource has been installed.
    input: AT Translated Set 2 keyboard as /class/input/input0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: IDE controller at PCI slot 0000:00:14.1
    VP_IDE: chipset revision 16
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
        ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
    Probing IDE interface ide0...
    hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
    hda: cache flushes not supported
    hda: hda1 hda2 hda3
    hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
    Uniform CD-ROM driver Revision: 3.20
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux agpgart interface v0.101 (c) Dave Jones
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
    11
    uhci_hcd 0000:00:14.2: UHCI Host Controller
    uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
    11
    uhci_hcd 0000:00:14.3: UHCI Host Controller
    uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
    agpgart: AGP aperture is 64M @ 0x90000000
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    usb 1-2: new full speed USB device using uhci_hcd and address 3
    usb 1-2: configuration #1 chosen from 1 choice
    parport_pc: VIA 686A/8231 detected
    parport_pc: probing current configuration
    parport_pc: Current parallel port base: 0x378
    parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EC
    P]
    parport_pc: VIA parallel port: io=0x378, irq=7
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ
    10
    PCI: Setting latency timer of device 0000:00:14.5 to 64
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: PC Speaker as /class/input/input1
    via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xad
    dr
    vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - upg
    rade BIOS or use force=1
    via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
    PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
    5
    eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
    eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
    usbcore: registered new interface driver hiddev
    usbhid: probe of 1-1:1.0 failed with error -71
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    Initializing USB Mass Storage driver...
    lp0: using parport0 (interrupt-driven).
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Real Time Clock Driver v1.12ac
    ppdev: user-space parallel port driver
    EXT3 FS on hda3, internal journal
    Adding 262576k swap on /dev/hda2.  Priority:-1 extents:1 across:262576k
    scsi 0:0:0:0: Direct-Access     JetFlash TS256MJF110      0.00 PQ: 0 ANSI: 2
    usb-storage: device scan complete
    eth0: link up, 10Mbps, half-duplex, lpa 0x0021
    SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 00 00 00
    sda: assuming drive cache: write through
    SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 00 00 00
    sda: assuming drive cache: write through
    sda: sda1
    sd 0:0:0:0: Attached scsi removable disk sda
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
    3
    [drm] Initialized savage 2.4.1 20050313 on minor 0
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
    eth0: no IPv6 routers present
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
    And here's the output of dmesg when the mouse works :
    $ dmesg
    Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
    BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    248MB LOWMEM available.
    Entering add_active_range(0, 0, 63488) 0 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      Normal       4096 ->    63488
      HighMem     63488 ->    63488
    early_node_map[1] active PFN ranges
        0:        0 ->    63488
    On node 0 totalpages: 63488
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 4064 pages, LIFO batch:0
      Normal zone: 464 pages used for memmap
      Normal zone: 58928 pages, LIFO batch:15
      HighMem zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP (v000 COMPAQ                                ) @ 0x000ec010
    ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503  0x00000000) @ 0x000ec080
    ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503  0x00000000) @ 0x000ec0cc
    ACPI: SSDT (v001 COMPAQ HAWA7K3  0x00000001 MSFT 0x0100000c) @ 0x000ec223
    ACPI: DSDT (v001 COMPAQ DSDTTBL  0x00000001 MSFT 0x0100000c) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xee08
    Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
    Detected 901.637 MHz processor.
    Built 1 zonelists.  Total pages: 62992
    Kernel command line: root=/dev/hda3 ro earlymodules=piix
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (011fa000)
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 4096 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data
    virtual kernel memory layout:
        fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xd0000000 - 0xff7fe000   ( 759 MB)
        lowmem  : 0xc0000000 - 0xcf800000   ( 248 MB)
          .init : 0xc0405000 - 0xc0446000   ( 260 kB)
          .data : 0xc0346806 - 0xc03fe64c   ( 735 kB)
          .text : 0xc0100000 - 0xc0346806   (2330 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 12k freed
    checking if image is initramfs... it is
    Freeing initrd memory: 501k freed
    ACPI: Core revision 20060707
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    ACPI: setting ELCR to 0200 (from 0c28)
    CPU0: AMD Duron(tm) Processor stepping 01
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [_SB_.PCI0] bus is 0
    PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
    PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
    pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
    PCI: Bridge: 0000:00:01.0
      IO window: disabled.
      MEM window: 80000000-800fffff
      PREFETCH window: 88000000-8fffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 98304 bytes)
    TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
    TCP: Hash tables configured (established 8192 bind 4096)
    TCP reno registered
    apm: BIOS not found.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI: Disabling Via external APIC routing
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PBTN]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
    PCI: setting IRQ 3 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: loaded (max 8 devices)
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 260k freed
    Time: tsc clocksource has been installed.
    input: AT Translated Set 2 keyboard as /class/input/input0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: IDE controller at PCI slot 0000:00:14.1
    VP_IDE: chipset revision 16
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
        ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
    Probing IDE interface ide0...
    hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
    hda: cache flushes not supported
    hda: hda1 hda2 hda3
    hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
    Uniform CD-ROM driver Revision: 3.20
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux agpgart interface v0.101 (c) Dave Jones
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
    uhci_hcd 0000:00:14.2: UHCI Host Controller
    uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
    uhci_hcd 0000:00:14.3: UHCI Host Controller
    uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
    agpgart: AGP aperture is 64M @ 0x90000000
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    usb 1-2: new full speed USB device using uhci_hcd and address 3
    usb 1-2: configuration #1 chosen from 1 choice
    parport_pc: VIA 686A/8231 detected
    parport_pc: probing current configuration
    parport_pc: Current parallel port base: 0x378
    parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,E
    parport_pc: VIA parallel port: io=0x378, irq=7
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IR
    PCI: Setting latency timer of device 0000:00:14.5 to 64
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: PC Speaker as /class/input/input1
    via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xa
    vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - up
    via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
    PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
    eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
    eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
    usbcore: registered new interface driver hiddev
    usbhid: probe of 1-1:1.0 failed with error -71
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    Initializing USB Mass Storage driver...
    lp0: using parport0 (interrupt-driven).
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Real Time Clock Driver v1.12ac
    ppdev: user-space parallel port driver
    EXT3 FS on hda3, internal journal
    Adding 262576k swap on /dev/hda2.  Priority:-1 extents:1 across:262576k
    scsi 0:0:0:0: Direct-Access     JetFlash TS256MJF110      0.00 PQ: 0 ANSI: 2
    usb-storage: device scan complete
    eth0: link up, 10Mbps, half-duplex, lpa 0x0021
    SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 00 00 00
    sda: assuming drive cache: write through
    SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 00 00 00
    sda: assuming drive cache: write through
    sda: sda1
    sd 0:0:0:0: Attached scsi removable disk sda
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
    [drm] Initialized savage 2.4.1 20050313 on minor 0
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
    eth0: no IPv6 routers present
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
    usb 1-1: USB disconnect, address 2
    usb 1-2: USB disconnect, address 3
    usb 1-1: new low speed USB device using uhci_hcd and address 4
    usb 1-1: configuration #1 chosen from 1 choice
    input: HID 062a:0000 as /class/input/input2
    input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:14.2-1

  • Display error after boot

    I'm having an issue where the display fails after boot, and displays only a fixed noise pattern. The screen looks completely normal through POST, GRUB, and when initially loading the kernel, when the display is still in a text mode. After that, the screen goes black for a brief second, after which it returns displaying the mentioned noise pattern. The system appears unresponsive after this, and the only option is to shut down the system with the power button.
    Adding nomodeset or vga=794 to the kernel options resolves the issue. That is a temporary fix IMHO; I'd prefer something sturdier, which is my reason for posting. The issue appeared after a pacman -Syu about a week ago, I just haven't had time to look at it until now.
    I've added i915 to MODULES in mkinitcpio.conf and rebuilt as described here in an attempt to fix it, but it did not seem to have any effect.
    I believe this may be a KMS or a driver issue, but I do not know how to confirm or troubleshoot it. I would be grateful if anyone could shed some light on the issue, or point me in the right direction to find out what's causing the issue. Please let me know if any more logs should be attached. I'll try to attach a picture of the screen as well as a dmesg output from the failed startup later.
    lshw:
    toasty
    description: Notebook
    product: 64665WG
    vendor: LENOVO
    version: ThinkPad T61
    serial: L3D7847
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 ldt16 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=ThinkPad T61 frontpanel_password=unknown keyboard_password=disabled power-on_password=disabled uuid=DDF8B081-4A90-11CB-8172-A970EC5BB61F
    *-core
    description: Motherboard
    product: 64665WG
    vendor: LENOVO
    physical id: 0
    version: Not Available
    serial: VF1GA83J1A4
    *-firmware
    description: BIOS
    vendor: LENOVO
    physical id: 0
    version: 7LETB2WW (2.12 )
    date: 02/20/2008
    size: 128KiB
    capacity: 4032KiB
    capabilities: pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom edd acpi usb biosbootspecification
    *-cpu
    description: CPU
    product: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    vendor: Intel Corp.
    physical id: 6
    bus info: cpu@0
    version: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    slot: None
    size: 1600MHz
    capacity: 2001MHz
    width: 64 bits
    clock: 200MHz
    capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority cpufreq
    *-cache:0
    description: L1 cache
    physical id: a
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back instruction
    *-cache:1
    description: L2 cache
    physical id: c
    slot: Internal L2 Cache
    size: 2MiB
    capacity: 2MiB
    capabilities: burst internal write-back unified
    *-cache
    description: L1 cache
    physical id: b
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back data
    *-memory
    description: System Memory
    physical id: 2b
    slot: System board or motherboard
    size: 3GiB
    *-bank:0
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 0
    slot: DIMM 1
    size: 1GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-bank:1
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 1
    slot: DIMM 2
    size: 2GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-pci
    description: Host bridge
    product: Mobile PM965/GM965/GL960 Memory Controller Hub
    vendor: Intel Corporation
    physical id: 100
    bus info: pci@0000:00:00.0
    version: 0c
    width: 32 bits
    clock: 33MHz
    *-display:0
    description: VGA compatible controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (primary)
    vendor: Intel Corporation
    physical id: 2
    bus info: pci@0000:00:02.0
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: msi pm vga_controller bus_master cap_list rom
    configuration: driver=i915 latency=0
    resources: irq:45 memory:f8100000-f81fffff memory:e0000000-efffffff ioport:1800(size=8)
    *-display:1 UNCLAIMED
    description: Display controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
    vendor: Intel Corporation
    physical id: 2.1
    bus info: pci@0000:00:02.1
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: latency=0
    resources: memory:f8200000-f82fffff
    *-network
    description: Ethernet interface
    product: 82566MM Gigabit Network Connection
    vendor: Intel Corporation
    physical id: 19
    bus info: pci@0000:00:19.0
    logical name: eth0
    version: 03
    serial: 00:1c:25:7c:64:7b
    capacity: 1Gbit/s
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair
    resources: irq:49 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32)
    *-usb:0
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #4
    vendor: Intel Corporation
    physical id: 1a
    bus info: pci@0000:00:1a.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci bus_master
    configuration: driver=uhci_hcd latency=0
    resources: irq:20 ioport:1860(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@1
    logical name: usb1
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:0
    description: Bluetooth wireless interface
    product: BCM2045B
    vendor: Broadcom Corp
    physical id: 1
    bus info: usb@1:1
    version: 1.00
    capabilities: bluetooth usb-2.00
    configuration: driver=btusb speed=12Mbit/s
    *-usb:1 UNCLAIMED
    description: Generic USB device
    product: Biometric Coprocessor
    vendor: STMicroelectronics
    physical id: 2
    bus info: usb@1:2
    version: 0.01
    capabilities: usb-1.00
    configuration: maxpower=100mA speed=12Mbit/s
    *-usb:1
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #5
    vendor: Intel Corporation
    physical id: 1a.1
    bus info: pci@0000:00:1a.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:21 ioport:1880(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@2
    logical name: usb2
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:2
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #2
    vendor: Intel Corporation
    physical id: 1a.7
    bus info: pci@0000:00:1a.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:22 memory:fe226c00-fe226fff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@6
    logical name: usb6
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=4 speed=480Mbit/s
    *-multimedia
    description: Audio device
    product: 82801H (ICH8 Family) HD Audio Controller
    vendor: Intel Corporation
    physical id: 1b
    bus info: pci@0000:00:1b.0
    version: 03
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list
    configuration: driver=snd_hda_intel latency=0
    resources: irq:47 memory:fe020000-fe023fff
    *-pci:0
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 1
    vendor: Intel Corporation
    physical id: 1c
    bus info: pci@0000:00:1c.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:40 ioport:2000(size=4096) memory:fc000000-fdffffff ioport:f8000000(size=1048576)
    *-pci:1
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 2
    vendor: Intel Corporation
    physical id: 1c.1
    bus info: pci@0000:00:1c.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:41 ioport:3000(size=4096) memory:dc000000-df3fffff ioport:dfe00000(size=1048576)
    *-network
    description: Wireless interface
    product: PRO/Wireless 3945ABG [Golan] Network Connection
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    logical name: wlan0
    version: 02
    serial: 00:1f:3c:28:8e:0d
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
    configuration: broadcast=yes driver=iwl3945 driverversion=3.15.1-1-ARCH firmware=15.32.2.9 ip=192.168.1.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
    resources: irq:48 memory:df3ff000-df3fffff
    *-pci:2
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 3
    vendor: Intel Corporation
    physical id: 1c.2
    bus info: pci@0000:00:1c.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:42 ioport:4000(size=4096) memory:d8000000-d9ffffff ioport:dfb00000(size=1048576)
    *-pci:3
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 4
    vendor: Intel Corporation
    physical id: 1c.3
    bus info: pci@0000:00:1c.3
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:43 ioport:5000(size=4096) memory:d4000000-d5ffffff ioport:df800000(size=1048576)
    *-pci:4
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 5
    vendor: Intel Corporation
    physical id: 1c.4
    bus info: pci@0000:00:1c.4
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:44 ioport:6000(size=4096) memory:d0000000-d1ffffff ioport:df500000(size=1048576)
    *-usb:3
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d
    bus info: pci@0000:00:1d.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:16 ioport:18a0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@3
    logical name: usb3
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:4
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #2
    vendor: Intel Corporation
    physical id: 1d.1
    bus info: pci@0000:00:1d.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:17 ioport:18c0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@4
    logical name: usb4
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:5
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #3
    vendor: Intel Corporation
    physical id: 1d.2
    bus info: pci@0000:00:1d.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:18 ioport:18e0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@5
    logical name: usb5
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:6
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d.7
    bus info: pci@0000:00:1d.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm debug ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:19 memory:fe227000-fe2273ff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@7
    logical name: usb7
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=6 speed=480Mbit/s
    *-pci:5
    description: PCI bridge
    product: 82801 Mobile PCI Bridge
    vendor: Intel Corporation
    physical id: 1e
    bus info: pci@0000:00:1e.0
    version: f3
    width: 32 bits
    clock: 33MHz
    capabilities: pci subtractive_decode bus_master cap_list
    resources: ioport:7000(size=16384) memory:f8300000-fbffffff ioport:f4000000(size=67108864)
    *-pcmcia
    description: CardBus bridge
    product: RL5c476 II
    vendor: Ricoh Co Ltd
    physical id: 0
    bus info: pci@0000:15:00.0
    version: ba
    width: 64 bits
    clock: 33MHz
    capabilities: pcmcia bus_master cap_list
    configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
    resources: iomemory:b01716150-b0171614f irq:16 memory:f8300000-f8300fff ioport:7000(size=256) ioport:7400(size=256) memory:f4000000-f7ffffff memory:c0000000-c3ffffff
    *-firewire
    description: FireWire (IEEE 1394)
    product: R5C832 IEEE 1394 Controller
    vendor: Ricoh Co Ltd
    physical id: 0.1
    bus info: pci@0000:15:00.1
    version: 04
    width: 32 bits
    clock: 33MHz
    capabilities: pm ohci bus_master cap_list
    configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
    resources: irq:17 memory:f8301000-f83017ff
    *-generic:0
    description: SD Host controller
    product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.2
    bus info: pci@0000:15:00.2
    version: 21
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=sdhci-pci latency=64
    resources: irq:18 memory:f8301800-f83018ff
    *-generic:1
    description: System peripheral
    product: R5C592 Memory Stick Bus Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.4
    bus info: pci@0000:15:00.4
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r592 latency=64
    resources: irq:18 memory:f8302000-f83020ff
    *-generic:2
    description: System peripheral
    product: xD-Picture Card Controller
    vendor: Ricoh Co Ltd
    physical id: 0.5
    bus info: pci@0000:15:00.5
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r852 latency=64
    resources: irq:18 memory:f8302400-f83024ff
    *-isa
    description: ISA bridge
    product: 82801HEM (ICH8M-E) LPC Interface Controller
    vendor: Intel Corporation
    physical id: 1f
    bus info: pci@0000:00:1f.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: isa bus_master cap_list
    configuration: driver=lpc_ich latency=0
    resources: irq:0
    *-ide
    description: IDE interface
    product: 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
    vendor: Intel Corporation
    physical id: 1f.1
    bus info: pci@0000:00:1f.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: ide bus_master
    configuration: driver=ata_piix latency=0
    resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1c00(size=16)
    *-storage
    description: SATA controller
    product: 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
    vendor: Intel Corporation
    physical id: 1f.2
    bus info: pci@0000:00:1f.2
    version: 03
    width: 32 bits
    clock: 66MHz
    capabilities: storage msi pm ahci_1.0 bus_master cap_list
    configuration: driver=ahci latency=0
    resources: irq:46 ioport:1c50(size=8) ioport:1c44(size=4) ioport:1c48(size=8) ioport:1c40(size=4) ioport:1c20(size=32) memory:fe226000-fe2267ff
    *-serial
    description: SMBus
    product: 82801H (ICH8 Family) SMBus Controller
    vendor: Intel Corporation
    physical id: 1f.3
    bus info: pci@0000:00:1f.3
    version: 03
    width: 32 bits
    clock: 33MHz
    configuration: driver=i801_smbus latency=0
    resources: irq:23 memory:fe227400-fe2274ff ioport:1c60(size=32)
    *-battery
    product: 92P1131
    vendor: SANYO
    physical id: 1
    slot: Rear
    capacity: 71280mWh
    configuration: voltage=10,8V
    UPDATE:
    The pattern appears for a few seconds before the screen goes completely black.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be6affff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000be6b0000-0x00000000be6cbfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000be6cc000-0x00000000be6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000be700000-0x00000000beffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: LENOVO 64665WG/64665WG, BIOS 7LETB2WW (2.12 ) 02/20/2008
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xbe6b0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0BF000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BE700000 mask FFFF00000 uncachable
    [ 0.000000] 4 base 0BE800000 mask FFF800000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbe6affff]
    [ 0.000000] [mem 0x00000000-0xbe5fffff] page 2M
    [ 0.000000] [mem 0xbe600000-0xbe6affff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xbe6affff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
    [ 0.000000] ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000be6bb74d 00094 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000be6bb800 000F4 (v03 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120913/tbfadt-567)
    [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120913/tbfadt-598)
    [ 0.000000] ACPI: DSDT 00000000be6bbc1d 0FF03 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000be6e4000 00040
    [ 0.000000] ACPI: SSDT 00000000be6bb9b4 00269 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: ECDT 00000000be6cbb20 00052 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: TCPA 00000000be6cbb72 00032 (v02 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: APIC 00000000be6cbba4 00068 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: MCFG 00000000be6cbc0c 0003C (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: HPET 00000000be6cbc48 00038 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: SLIC 00000000be6cbdf0 00176 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000be6cbf66 00028 (v01 LENOVO TP-7L 00002120 LTP 00000001)
    [ 0.000000] ACPI: ASF! 00000000be6cbf8e 00072 (v16 LENOVO TP-7L 00002120 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000be6e234d 0025F (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e25ac 000A6 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2652 004F7 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2b49 001D8 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000be6affff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbe6affff]
    [ 0.000000] NODE_DATA [mem 0xbe6ac000-0xbe6affff]
    [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bae00000-ffff8800bddfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbe6affff]
    [ 0.000000] On node 0 totalpages: 779837
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12123 pages used for memmap
    [ 0.000000] DMA32 zone: 763733 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] e820: [mem 0xbf000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800be400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 767644
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3055496k/3119808k available (4883k kernel code, 460k absent, 63852k reserved, 4030k data, 812k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12582912 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1994.883 MHz processor
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.00 BogoMIPS (lpj=6649610)
    [ 0.003345] pid_max: default: 32768 minimum: 301
    [ 0.003411] Security Framework initialized
    [ 0.003429] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004096] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009707] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011314] Mount-cache hash table entries: 256
    [ 0.011743] Initializing cgroup subsys cpuacct
    [ 0.011749] Initializing cgroup subsys memory
    [ 0.011767] Initializing cgroup subsys devices
    [ 0.011769] Initializing cgroup subsys freezer
    [ 0.011772] Initializing cgroup subsys net_cls
    [ 0.011775] Initializing cgroup subsys blkio
    [ 0.011826] CPU: Physical Processor ID: 0
    [ 0.011829] CPU: Processor Core ID: 0
    [ 0.011833] mce: CPU supports 6 MCE banks
    [ 0.011846] CPU0: Thermal monitoring enabled (TM2)
    [ 0.011853] process: using mwait in idle threads
    [ 0.011861] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.012032] Freeing SMP alternatives: 16k freed
    [ 0.014357] ACPI: Core revision 20120913
    [ 0.030022] ftrace: allocating 18793 entries in 74 pages
    [ 0.043969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.078117] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.079999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.079999] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.079999] ... version: 2
    [ 0.079999] ... bit width: 40
    [ 0.079999] ... generic registers: 2
    [ 0.079999] ... value mask: 000000ffffffffff
    [ 0.079999] ... max period: 000000007fffffff
    [ 0.079999] ... fixed-purpose events: 3
    [ 0.079999] ... event mask: 0000000700000003
    [ 0.103422] smpboot: Booting Node 0, Processors #1 OK
    [ 0.116550] TSC synchronization [CPU#0 -> CPU#1]:
    [ 0.116555] Measured 1027940 cycles TSC warp between CPUs, turning off TSC clock.
    [ 0.116559] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [ 0.116688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.116707] Brought up 2 CPUs
    [ 0.116712] smpboot: Total of 2 processors activated (7982.01 BogoMIPS)
    [ 0.118692] devtmpfs: initialized
    [ 0.121214] PM: Registering ACPI NVS region [mem 0xbe6cc000-0xbe6fffff] (212992 bytes)
    [ 0.121884] RTC time: 16:07:33, date: 02/11/13
    [ 0.121966] NET: Registered protocol family 16
    [ 0.121966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.121966] ACPI: bus type pci registered
    [ 0.121966] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.121966] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.130348] PCI: Using configuration type 1 for base access
    [ 0.130570] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.130572] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.130575] mtrr: corrected configuration.
    [ 0.133373] bio: create slab <bio-0> at 0
    [ 0.133410] ACPI: Added _OSI(Module Device)
    [ 0.133410] ACPI: Added _OSI(Processor Device)
    [ 0.133410] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.133410] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.133410] ACPI: Added _OSI(Linux)
    [ 0.135453] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.145385] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
    [ 0.170056] ACPI: SSDT 00000000be6e1aef 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171067] ACPI: Dynamic OEM Table Load:
    [ 0.171073] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171422] ACPI: SSDT 00000000be6e1a6a 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172356] ACPI: Dynamic OEM Table Load:
    [ 0.172362] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172394] ACPI: Interpreter enabled
    [ 0.172394] ACPI: (supports S0 S3 S4 S5)
    [ 0.172394] ACPI: Using IOAPIC for interrupt routing
    [ 0.177412] ACPI: Power Resource [PUBS] (on)
    [ 0.180918] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
    [ 0.184454] ACPI: ACPI Dock Station Driver: 3 docks/bays found
    [ 0.184462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.184462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.184462] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.184462] PCI host bridge to bus 0000:00
    [ 0.184462] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.184462] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.184462] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.184462] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
    [ 0.184462] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.184462] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.184462] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.184462] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
    [ 0.184462] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
    [ 0.184462] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
    [ 0.184462] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
    [ 0.184462] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
    [ 0.184462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.184462] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.184588] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
    [ 0.184699] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.184850] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
    [ 0.184992] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.185046] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
    [ 0.185305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.185386] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.185446] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
    [ 0.185725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.185810] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.186107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186189] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.186472] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.186563] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.186861] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.186951] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    [ 0.187249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.187340] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.187631] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187718] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.187866] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
    [ 0.187980] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.188132] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
    [ 0.188244] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.188389] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.188540] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.188605] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
    [ 0.188893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.188960] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.189213] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
    [ 0.189448] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.189461] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.189471] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
    [ 0.189479] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
    [ 0.189488] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
    [ 0.189613] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
    [ 0.189656] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.189687] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.189719] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.189751] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.189782] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f]
    [ 0.189925] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
    [ 0.190005] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
    [ 0.190036] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
    [ 0.190068] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
    [ 0.190100] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
    [ 0.190131] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
    [ 0.190160] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
    [ 0.190339] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.190403] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.190448] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
    [ 0.190562] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
    [ 0.190820] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.190833] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.190845] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.190863] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.191139] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
    [ 0.191201] pci 0000:03:00.0: reg 10: [mem 0xdf3ff000-0xdf3fffff]
    [ 0.191653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.200091] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.200100] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.200108] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.200120] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.200236] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.200248] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.200260] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.200280] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.200446] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.200458] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.200470] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.200490] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.200649] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.200661] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.200671] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.200691] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.200808] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
    [ 0.200862] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
    [ 0.200865] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
    [ 0.200907] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
    [ 0.201003] pci 0000:15:00.0: supports D1 D2
    [ 0.201008] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201070] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
    [ 0.201128] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
    [ 0.201392] pci 0000:15:00.1: supports D1 D2
    [ 0.201396] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201459] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
    [ 0.201517] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff]
    [ 0.201781] pci 0000:15:00.2: supports D1 D2
    [ 0.201785] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201848] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
    [ 0.201907] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff]
    [ 0.202168] pci 0000:15:00.4: supports D1 D2
    [ 0.202172] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202235] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
    [ 0.202293] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff]
    [ 0.202554] pci 0000:15:00.5: supports D1 D2
    [ 0.202558] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202730] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
    [ 0.202742] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.202755] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.202775] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.202779] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.202784] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.202788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.202793] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.202797] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.202801] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.202806] pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
    [ 0.202810] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
    [ 0.202916] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
    [ 0.202927] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
    [ 0.203040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.203194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    [ 0.203241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.203286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.203337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.203398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.203450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [ 0.203867] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.204419] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.213100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.213218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.216702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.216715] vgaarb: loaded
    [ 0.216718] vgaarb: bridge control possible 0000:00:02.0
    [ 0.216791] PCI: Using ACPI for IRQ routing
    [ 0.217268] PCI: pci_cache_line_size set to 64 bytes
    [ 0.217440] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.217445] e820: reserve RAM buffer [mem 0xbe6b0000-0xbfffffff]
    [ 0.217631] NetLabel: Initializing
    [ 0.217635] NetLabel: domain hash size = 128
    [ 0.217637] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.217665] NetLabel: unlabeled traffic allowed by default
    [ 0.217694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.217700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.217708] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.230023] Switching to clocksource hpet
    [ 0.241152] pnp: PnP ACPI init
    [ 0.241186] ACPI: bus type pnp registered
    [ 0.241858] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.241863] pnp 00:00: [mem 0x000c0000-0x000c3fff]
    [ 0.241868] pnp 00:00: [mem 0x000c4000-0x000c7fff]
    [ 0.241878] pnp 00:00: [mem 0x000c8000-0x000cbfff]
    [ 0.241882] pnp 00:00: [mem 0x000cc000-0x000cffff]
    [ 0.241886] pnp 00:00: [mem 0x000d0000-0x000d3fff]
    [ 0.241890] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
    [ 0.241894] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
    [ 0.241898] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
    [ 0.241902] pnp 00:00: [mem 0x000e0000-0x000e3fff]
    [ 0.241906] pnp 00:00: [mem 0x000e4000-0x000e7fff]
    [ 0.241910] pnp 00:00: [mem 0x000e8000-0x000ebfff]
    [ 0.241914] pnp 00:00: [mem 0x000ec000-0x000effff]
    [ 0.241918] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.241922] pnp 00:00: [mem 0x00100000-0xbeffffff]
    [ 0.241926] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
    [ 0.241930] pnp 00:00: [mem 0xfed4c000-0xffffffff]
    [ 0.242062] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.242068] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.242073] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.242078] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.242083] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.242088] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
    [ 0.242093] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.242098] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.242103] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.242108] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.242113] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.242118] system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
    [ 0.242124] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.242129] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.242138] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.242179] pnp 00:01: [bus 00-ff]
    [ 0.242184] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.242188] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.242193] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.242197] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.242202] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    [ 0.242206] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    [ 0.242211] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    [ 0.242215] pnp 00:01: [mem 0x000cc000-0x000cffff window]
    [ 0.242219] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    [ 0.242223] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    [ 0.242227] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    [ 0.242232] pnp 00:01: [mem 0x000dc000-0x000dffff window]
    [ 0.242236] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    [ 0.242240] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    [ 0.242244] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    [ 0.242248] pnp 00:01: [mem 0x000ec000-0x000effff window]
    [ 0.242253] pnp 00:01: [mem 0xbf000000-0xfebfffff window]
    [ 0.242257] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
    [ 0.242329] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.242400] pnp 00:02: [io 0x0010-0x001f]
    [ 0.242405] pnp 00:02: [io 0x0090-0x009f]
    [ 0.242409] pnp 00:02: [io 0x0024-0x0025]
    [ 0.242413] pnp 00:02: [io 0x0028-0x0029]
    [ 0.242417] pnp 00:02: [io 0x002c-0x002d]
    [ 0.242421] pnp 00:02: [io 0x0030-0x0031]
    [ 0.242424] pnp 00:02: [io 0x0034-0x0035]
    [ 0.242428] pnp 00:02: [io 0x0038-0x0039]
    [ 0.242432] pnp 00:02: [io 0x003c-0x003d]
    [ 0.242441] pnp 00:02: [io 0x00a4-0x00a5]
    [ 0.242445] pnp 00:02: [io 0x00a8-0x00a9]
    [ 0.242449] pnp 00:02: [io 0x00ac-0x00ad]
    [ 0.242452] pnp 00:02: [io 0x00b0-0x00b5]
    [ 0.242456] pnp 00:02: [io 0x00b8-0x00b9]
    [ 0.242460] pnp 00:02: [io 0x00bc-0x00bd]
    [ 0.242464] pnp 00:02: [io 0x0050-0x0053]
    [ 0.242468] pnp 00:02: [io 0x0072-0x0077]
    [ 0.242472] pnp 00:02: [io 0x164e-0x164f]
    [ 0.242476] pnp 00:02: [io 0x002e-0x002f]
    [ 0.242479] pnp 00:02: [io 0x1000-0x107f]
    [ 0.242483] pnp 00:02: [io 0x1180-0x11bf]
    [ 0.242487] pnp 00:02: [io 0x0800-0x080f]
    [ 0.242491] pnp 00:02: [io 0x15e0-0x15ef]
    [ 0.242495] pnp 00:02: [io 0x1600-0x165f]
    [ 0.242499] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
    [ 0.242503] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
    [ 0.242507] pnp 00:02: [mem 0xfed14000-0xfed17fff]
    [ 0.242511] pnp 00:02: [mem 0xfed18000-0xfed18fff]
    [ 0.242515] pnp 00:02: [mem 0xfed19000-0xfed19fff]
    [ 0.242519] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
    [ 0.242663] system 00:02: [io 0x164e-0x164f] has been reserved
    [ 0.242668] system 00:02: [io 0x1000-0x107f] has been reserved
    [ 0.242674] system 00:02: [io 0x1180-0x11bf] has been reserved
    [ 0.242679] system 00:02: [io 0x0800-0x080f] has been reserved
    [ 0.242684] system 00:02: [io 0x15e0-0x15ef] has been reserved
    [ 0.242689] system 00:02: [io 0x1600-0x165f] could not be reserved
    [ 0.242695] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.242700] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.242706] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.242711] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.242716] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.242721] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.242728] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.242791] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.242838] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.242855] pnp 00:04: [io 0x0000-0x000f]
    [ 0.242859] pnp 00:04: [io 0x0080-0x008f]
    [ 0.242863] pnp 00:04: [io 0x00c0-0x00df]
    [ 0.242868] pnp 00:04: [dma 4]
    [ 0.242913] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.242927] pnp 00:05: [io 0x0061]
    [ 0.242969] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.242984] pnp 00:06: [io 0x00f0]
    [ 0.243003] pnp 00:06: [irq 13]
    [ 0.243052] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.243068] pnp 00:07: [io 0x0070-0x0071]
    [ 0.243078] pnp 00:07: [irq 8]
    [ 0.243119] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.243135] pnp 00:08: [io 0x0060]
    [ 0.243140] pnp 00:08: [io 0x0064]
    [ 0.243149] pnp 00:08: [irq 1]
    [ 0.243194] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.243215] pnp 00:09: [irq 12]
    [ 0.243258] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
    [ 0.243896] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.243949] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
    [ 0.244685] pnp: PnP ACPI: found 11 devices
    [ 0.244689] ACPI: ACPI bus type pnp unregistered
    [ 0.253426] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.253435] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.253445] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.253454] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253466] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.253472] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.253481] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.253490] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253501] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.253507] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.253517] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.253525] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253537] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.253543] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.253552] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.253560] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253572] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.253578] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.253587] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.253595] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253611] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.253616] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.253621] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253626] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253634] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253642] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
    [ 0.253647] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
    [ 0.253652] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
    [ 0.253657] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
    [ 0.253661] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
    [ 0.253670] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
    [ 0.253679] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253688] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
    [ 0.253697] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
    [ 0.253703] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.253713] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.253721] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253801] pci 0000:00:1e.0: enabling device (0005 -> 0007)
    [ 0.253811] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.253834] pci 0000:15:00.0: setting latency timer to 64
    [ 0.253842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.253847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.253851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253856] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253860] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253864] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253869] pci_bus 0000:00: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253873] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253877] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.253882] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
    [ 0.253886] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253891] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.253895] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
    [ 0.253900] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253904] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
    [ 0.253908] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
    [ 0.253913] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253917] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
    [ 0.253921] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
    [ 0.253926] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253930] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
    [ 0.253935] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
    [ 0.253939] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253943] pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
    [ 0.253948] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
    [ 0.253952] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253956] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
    [ 0.253961] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
    [ 0.253965] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253969] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253973] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253978] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253982] pci_bus 0000:15: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253986] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253991] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
    [ 0.253995] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
    [ 0.253999] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
    [ 0.254004] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
    [ 0.254070] NET: Registered protocol family 2
    [ 0.255457] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.261656] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.262461] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.262588] TCP: reno registered
    [ 0.262605] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262669] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262858] NET: Registered protocol family 1
    [ 0.262887] pci 0000:00:02.0: Boot video device
    [ 0.262954] pci 0000:00:1a.1: power state changed by ACPI to D0
    [ 0.263064] pci 0000:00:1d.0: power state changed by ACPI to D0
    [ 0.263144] pci 0000:00:1d.2: power state changed by ACPI to D0
    [ 0.263269] PCI: CLS 64 bytes, default 64
    [ 0.263404] Unpacking initramfs...
    [ 0.381385] Freeing initrd memory: 3008k freed
    [ 0.383142] Simple Boot Flag at 0x35 set to 0x1
    [ 0.383770] audit: initializing netlink socket (disabled)
    [ 0.383796] type=2000 audit(1360598852.383:1): initialized
    [ 0.406333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.409592] VFS: Disk quotas dquot_6.5.2
    [ 0.409682] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.410020] msgmni has been set to 5973
    [ 0.410394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.410438] io scheduler noop registered
    [ 0.410442] io scheduler deadline registered
    [ 0.410500] io scheduler cfq registered (default)
    [ 0.410773] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.411021] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.411259] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.411502] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.411743] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 0.411960] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.411970] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.412008] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.412012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.412021] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.412055] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.412063] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.412096] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.412105] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.412144] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.412152] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.412275] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.412278] vesafb: scrolling: redraw
    [ 0.412282] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.413060] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 4032k, total 4032k
    [ 0.470284] Console: switching to colour frame buffer device 160x50
    [ 0.527327] fb0: VESA VGA frame buffer device
    [ 0.527346] intel_idle: does not run on family 6 model 15
    [ 0.527398] GHES: HEST is not enabled!
    [ 0.527510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.528201] Linux agpgart interface v0.103
    [ 0.528345] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.535966] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.536026] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.536202] mousedev: PS/2 mouse device common for all mice
    [ 0.536311] rtc_cmos 00:07: RTC can wake from S4
    [ 0.536519] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 0.536558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.536573] cpuidle: using governor ladder
    [ 0.536576] cpuidle: using governor menu
    [ 0.536664] drop_monitor: Initializing network drop monitor service
    [ 0.536802] TCP: cubic registered
    [ 0.537011] NET: Registered protocol family 10
    [ 0.537302] NET: Registered protocol family 17
    [ 0.537323] Key type dns_resolver registered
    [ 0.537728] PM:

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • No battery after boot. Dell 7537

    Hi All,
    I have this issue after installing arch (currently the only issue)
    As it is a notebook, I would love to see my current levels of battery, right after boot, but I am unable to. The only way how to trigger the battery notification is to
    1.) hybernate
        OR
    2.) connect/disconnect the AC adapter.
    And I would like to make it automatic.
    Thank you, in advance, for any kind of clues.
    Something about my system:
    [void@GLaDOS ~]$ uname -a
    Linux GLaDOS 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64 GNU/Linux
    [void@GLaDOS ~]$
    [void@GLaDOS ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda10
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a611dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000a6320000-0x00000000ba6f8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
    [ 0.000000] e820: update [mem 0xa7124018-0xa7134057] usable ==> usable
    [ 0.000000] e820: update [mem 0xa7116018-0xa7123057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a611dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000a6320000-0x00000000a7116017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7116018-0x00000000a7123057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7123058-0x00000000a7124017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7124018-0x00000000a7134057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7134058-0x00000000ba6f8fff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
    [ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbce84000
    [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x0000000000058000) (0MB)
    [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009d000) (0MB)
    [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=0, attr=0x0, range=[0x00000000000e0000-0x0000000000100000) (0MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
    [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000001f61000-0x000000007fcdf000) (2013MB)
    [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000007fcdf000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000080000000-0x00000000a4106000) (577MB)
    [ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x00000000a4106000-0x00000000a4126000) (0MB)
    [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000a4126000-0x00000000a6107000) (31MB)
    [ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000a6107000-0x00000000a611e000) (0MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x00000000a611e000-0x00000000a6320000) (2MB)
    [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000a6320000-0x00000000a70f6000) (13MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000a70f6000-0x00000000a7116000) (0MB)
    [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000a7116000-0x00000000a7136000) (0MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a7136000-0x00000000a7137000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000a7137000-0x00000000a713a000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a713a000-0x00000000a734d000) (2MB)
    [ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000a734d000-0x00000000a7730000) (3MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a7730000-0x00000000ac157000) (74MB)
    [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ac157000-0x00000000ad385000) (18MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000ad385000-0x00000000ad69d000) (3MB)
    [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000ad69d000-0x00000000ad6c1000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ad6c1000-0x00000000ad6e5000) (0MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ad6e5000-0x00000000ad86e000) (1MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000ad86e000-0x00000000ad922000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ad922000-0x00000000aeae1000) (17MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000aeae1000-0x00000000aeae3000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000aeae3000-0x00000000afdd9000) (18MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000afdd9000-0x00000000ba1b3000) (163MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000ba1b3000-0x00000000ba6f9000) (5MB)
    [ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000ba6f9000-0x00000000ba8fb000) (2MB)
    [ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000ba8fb000-0x00000000bc8fb000) (32MB)
    [ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000bc8fb000-0x00000000bceeb000) (5MB)
    [ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x00000000bceeb000-0x00000000bcf9d000) (0MB)
    [ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x00000000bcf9d000-0x00000000bcfff000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000bcfff000-0x00000000bd000000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f600000) (5110MB)
    [ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem43: type=0, attr=0x0, range=[0x00000000bd000000-0x00000000bfa00000) (42MB)
    [ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
    [ 0.000000] efi: mem45: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem47: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem48: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem49: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. Inspiron 7537/07PF9F, BIOS A07 01/21/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
    [ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
    [ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
    [ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M
    [ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
    [ 0.000000] [mem 0x23c000000-0x23f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
    [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa611dfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xa5ffffff] page 2M
    [ 0.000000] [mem 0xa6000000-0xa611dfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xa6320000-0xba6f8fff]
    [ 0.000000] [mem 0xa6320000-0xa63fffff] page 4k
    [ 0.000000] [mem 0xa6400000-0xba5fffff] page 2M
    [ 0.000000] [mem 0xba600000-0xba6f8fff] page 4k
    [ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
    [ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
    [ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x7fcdf000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000bcffe014 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000bcffe170 0000CC (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 00000000bcffb000 00010C (v05 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
    [ 0.000000] ACPI: DSDT 00000000bcfe9000 00D96C (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 00000000bcf9a000 000040
    [ 0.000000] ACPI: ASF! 00000000bcffd000 0000A5 (v32 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 00000000bcffa000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 00000000bcff9000 00005C (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 00000000bcff8000 000098 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 00000000bcff7000 00003C (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 00000000bcfe8000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe5000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe4000 0004D6 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe3000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfdf000 003517 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 00000000bcfde000 000042 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MSDM 00000000bcf72000 000055 (v03 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 00000000bcfdd000 00003E (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 00000000bcfdc000 000064 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 00000000bcfdb000 000176 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 00000000bcfd9000 001049 (v01 NvORef NvUltTbl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfd8000 0008CA (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 00000000bcfd7000 0002CE (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BGRT 00000000bcfd6000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: CSRT 00000000bcfd5000 0000C4 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
    [ 0.000000] NODE_DATA [mem 0x23f5f8000-0x23f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00057fff]
    [ 0.000000] node 0: [mem 0x00059000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xa611dfff]
    [ 0.000000] node 0: [mem 0xa6320000-0xba6f8fff]
    [ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f5fffff]
    [ 0.000000] On node 0 totalpages: 2071187
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11860 pages used for memmap
    [ 0.000000] DMA32 zone: 759032 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20440 pages used for memmap
    [ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa611e000-0xa631ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7116000-0xa7116fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7123000-0xa7123fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7124000-0xa7124fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7134000-0xa7134fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba6f9000-0xbceeafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbceeb000-0xbcf9cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbcf9d000-0xbcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038802
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda10
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7993744K/8284748K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 291004K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1795.962 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.58 BogoMIPS (lpj=5986540)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000021] init_memory_mapping: [mem 0xba6f9000-0xba8fafff]
    [ 0.000024] [mem 0xba6f9000-0xba8fafff] page 4k
    [ 0.000044] init_memory_mapping: [mem 0xba8fb000-0xbc8fafff]
    [ 0.000045] [mem 0xba8fb000-0xba9fffff] page 4k
    [ 0.000046] [mem 0xbaa00000-0xbc7fffff] page 2M
    [ 0.000047] [mem 0xbc800000-0xbc8fafff] page 4k
    [ 0.037714] Security Framework initialized
    [ 0.037724] AppArmor: AppArmor disabled by boot time parameter
    [ 0.037725] Yama: becoming mindful.
    [ 0.038391] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.040413] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.041277] Mount-cache hash table entries: 256
    [ 0.041479] Initializing cgroup subsys memory
    [ 0.041486] Initializing cgroup subsys devices
    [ 0.041488] Initializing cgroup subsys freezer
    [ 0.041489] Initializing cgroup subsys net_cls
    [ 0.041491] Initializing cgroup subsys blkio
    [ 0.041517] CPU: Physical Processor ID: 0
    [ 0.041518] CPU: Processor Core ID: 0
    [ 0.041523] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.042693] mce: CPU supports 7 MCE banks
    [ 0.042708] CPU0: Thermal monitoring enabled (TM1)
    [ 0.042721] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.042829] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.043845] ACPI: Core revision 20131115
    [ 0.056685] ACPI: All ACPI Tables successfully acquired
    [ 0.061212] ftrace: allocating 21068 entries in 83 pages
    [ 0.072756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.105753] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.105760] TSC deadline timer enabled
    [ 0.105771] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.105779] ... version: 3
    [ 0.105780] ... bit width: 48
    [ 0.105781] ... generic registers: 4
    [ 0.105782] ... value mask: 0000ffffffffffff
    [ 0.105783] ... max period: 0000ffffffffffff
    [ 0.105784] ... fixed-purpose events: 3
    [ 0.105785] ... event mask: 000000070000000f
    [ 0.132534] x86: Booting SMP configuration:
    [ 0.147279] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.132537] .... node #0, CPUs: #1 #2 #3
    [ 0.189504] x86: Booted up 1 node, 4 CPUs
    [ 0.189509] smpboot: Total of 4 processors activated (14373.35 BogoMIPS)
    [ 0.195133] devtmpfs: initialized
    [ 0.198124] PM: Registering ACPI NVS region [mem 0xbceeb000-0xbcf9cfff] (729088 bytes)
    [ 0.199015] RTC time: 17:45:30, date: 03/28/14
    [ 0.199059] NET: Registered protocol family 16
    [ 0.199163] cpuidle: using governor ladder
    [ 0.199165] cpuidle: using governor menu
    [ 0.199193] ACPI: bus type PCI registered
    [ 0.199195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.199264] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.199267] PCI: not using MMCONFIG
    [ 0.199269] PCI: Using configuration type 1 for base access
    [ 0.200095] bio: create slab <bio-0> at 0
    [ 0.200221] ACPI: Added _OSI(Module Device)
    [ 0.200223] ACPI: Added _OSI(Processor Device)
    [ 0.200225] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.200226] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.205589] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.209306] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.255573] ACPI: SSDT 00000000bcedec18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.256196] ACPI: Dynamic OEM Table Load:
    [ 0.256198] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.268541] ACPI: SSDT 00000000bcede618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.269250] ACPI: Dynamic OEM Table Load:
    [ 0.269253] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.281706] ACPI: SSDT 00000000bce90d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.282323] ACPI: Dynamic OEM Table Load:
    [ 0.282325] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.295717] ACPI: Interpreter enabled
    [ 0.295726] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 0.295733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 0.295754] ACPI: (supports S0 S3 S4 S5)
    [ 0.295755] ACPI: Using IOAPIC for interrupt routing
    [ 0.295777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.296299] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.307483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.307717] ACPI: No dock devices found.
    [ 0.403027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.403034] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.403170] \_SB_.PCI0:_OSC invalid UUID
    [ 0.403171] _OSC request data:1 1f 0
    [ 0.403176] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.403785] PCI host bridge to bus 0000:00
    [ 0.403788] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.403791] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.403793] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.403795] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.403797] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.403798] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.403800] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.403802] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.403804] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.403805] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.403807] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.403809] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.403811] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.403812] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.403814] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.403816] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.403818] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.403827] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.403987] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.404001] pci 0000:00:02.0: reg 0x10: [mem 0xe3000000-0xe33fffff 64bit]
    [ 0.404009] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.404015] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 0.404166] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.404176] pci 0000:00:03.0: reg 0x10: [mem 0xe3610000-0xe3613fff 64bit]
    [ 0.404351] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.404370] pci 0000:00:14.0: reg 0x10: [mem 0xe3600000-0xe360ffff 64bit]
    [ 0.404432] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.404565] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.404585] pci 0000:00:16.0: reg 0x10: [mem 0xe3619000-0xe361901f 64bit]
    [ 0.404648] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.404791] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.404806] pci 0000:00:1b.0: reg 0x10: [mem 0xe3614000-0xe3617fff 64bit]
    [ 0.404871] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.405010] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.405075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.405213] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.405279] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.405384] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.405417] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.405482] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.405587] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.405620] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 0.405686] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.405827] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.405849] pci 0000:00:1d.0: reg 0x10: [mem 0xe361d000-0xe361d3ff]
    [ 0.405942] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.406061] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.406099] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.406339] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.406355] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 0.406363] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 0.406370] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 0.406378] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 0.406385] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 0.406393] pci 0000:00:1f.2: reg 0x24: [mem 0xe361c000-0xe361c7ff]
    [ 0.406431] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.406557] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.406571] pci 0000:00:1f.3: reg 0x10: [mem 0xe3618000-0xe36180ff 64bit]
    [ 0.406592] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.406787] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.406893] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.406935] pci 0000:02:00.0: reg 0x10: [mem 0xe3500000-0xe3501fff 64bit]
    [ 0.407119] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.407174] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.411704] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.411710] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
    [ 0.411794] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
    [ 0.411812] pci 0000:03:00.0: reg 0x10: [mem 0xe3405000-0xe3405fff]
    [ 0.411878] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.411944] pci 0000:03:00.0: supports D1 D2
    [ 0.411946] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.411991] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.412035] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
    [ 0.412052] pci 0000:03:00.1: reg 0x10: [io 0x4000-0x40ff]
    [ 0.412081] pci 0000:03:00.1: reg 0x18: [mem 0xe3404000-0xe3404fff 64bit]
    [ 0.412100] pci 0000:03:00.1: reg 0x20: [mem 0xe3400000-0xe3403fff 64bit]
    [ 0.412177] pci 0000:03:00.1: supports D1 D2
    [ 0.412178] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.418364] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.418368] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
    [ 0.418371] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
    [ 0.418458] pci 0000:04:00.0: [10de:0fe4] type 00 class 0x030200
    [ 0.418472] pci 0000:04:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
    [ 0.418487] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.418502] pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
    [ 0.418512] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.418523] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.425027] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.425031] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.425034] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
    [ 0.425040] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.438876] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.438935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.438989] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.452346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.452355] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.452440] Found 1 acpi root devices
    [ 0.452526] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.452530] vgaarb: loaded
    [ 0.452532] vgaarb: bridge control possible 0000:00:02.0
    [ 0.452565] PCI: Using ACPI for IRQ routing
    [ 0.453935] PCI: pci_cache_line_size set to 64 bytes
    [ 0.454004] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
    [ 0.454006] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.454007] e820: reserve RAM buffer [mem 0xa611e000-0xa7ffffff]
    [ 0.454009] e820: reserve RAM buffer [mem 0xa7116018-0xa7ffffff]
    [ 0.454011] e820: reserve RAM buffer [mem 0xa7124018-0xa7ffffff]
    [ 0.454012] e820: reserve RAM buffer [mem 0xba6f9000-0xbbffffff]
    [ 0.454014] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
    [ 0.454016] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
    [ 0.454099] NetLabel: Initializing
    [ 0.454100] NetLabel: domain hash size = 128
    [ 0.454101] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.454114] NetLabel: unlabeled traffic allowed by default
    [ 0.454127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.454133] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.456157] Switched to clocksource hpet
    [ 0.461039] pnp: PnP ACPI init
    [ 0.461055] ACPI: bus type PNP registered
    [ 0.461144] system 00:00: [io 0x04d0-0x04d1] has been reserved
    [ 0.461150] system 00:00: [mem 0xfe800000-0xfe802fff] has been reserved
    [ 0.461154] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.461172] pnp 00:01: [dma 4]
    [ 0.461188] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.461211] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.461322] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.461362] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.461364] system 00:04: [io 0xffff] has been reserved
    [ 0.461366] system 00:04: [io 0xffff] has been reserved
    [ 0.461368] system 00:04: [io 0xffff] has been reserved
    [ 0.461371] system 00:04: [io 0x1800-0x18fe] could not be reserved
    [ 0.461373] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.461375] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.461424] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.461470] system 00:06: [io 0x1854-0x1857] has been reserved
    [ 0.461473] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.461551] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.461612] pnp 00:08: Plug and Play ACPI device, IDs DLL05f9 SYN0600 SYN0002 PNP0f13 (active)
    [ 0.461752] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.461754] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.461756] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.461758] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.461761] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved
    [ 0.461763] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.461765] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.461767] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.461769] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.461771] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.461774] system 00:09: [mem 0xbfa10000-0xbfa1ffff] has been reserved
    [ 0.461776] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.492900] system 00:0a: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.492904] system 00:0a: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.492907] system 00:0a: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.492909] system 00:0a: [mem 0xfe108000-0xfe108fff] has been reserved
    [ 0.492911] system 00:0a: [mem 0xfe10a000-0xfe10afff] has been reserved
    [ 0.492913] system 00:0a: [mem 0xfe10c000-0xfe10cfff] has been reserved
    [ 0.492915] system 00:0a: [mem 0xfe10e000-0xfe10efff] has been reserved
    [ 0.492917] system 00:0a: [mem 0xfe112000-0xfe112fff] has been reserved
    [ 0.492920] system 00:0a: [mem 0xfe111000-0xfe111007] has been reserved
    [ 0.492922] system 00:0a: [mem 0xfe111014-0xfe111fff] has been reserved
    [ 0.492926] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.519796] pnp 00:0b: Plug and Play ACPI device, IDs SMO8810 (active)
    [ 0.533124] pnp: PnP ACPI: found 12 devices
    [ 0.533126] ACPI: bus type PNP unregistered
    [ 0.539394] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.539397] pci 0000:04:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.539432] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539435] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.539446] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.539451] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
    [ 0.539463] pci 0000:03:00.0: BAR 6: assigned [mem 0xbfb00000-0xbfb0ffff pref]
    [ 0.539466] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.539468] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
    [ 0.539473] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
    [ 0.539477] pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539483] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x80000)
    [ 0.539486] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.539488] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.539493] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
    [ 0.539497] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.539503] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539505] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539509] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.539511] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.539513] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.539515] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.539517] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.539518] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.539520] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.539522] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.539524] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.539526] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.539527] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.539529] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.539531] pci_bus 0000:00: resource 19 [mem 0xbfa00000-0xfeafffff]
    [ 0.539533] pci_bus 0000:02: resource 1 [mem 0xe3500000-0xe35fffff]
    [ 0.539535] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    [ 0.539537] pci_bus 0000:03: resource 1 [mem 0xe3400000-0xe34fffff]
    [ 0.539539] pci_bus 0000:03: resource 2 [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539541] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.539543] pci_bus 0000:04: resource 1 [mem 0xe2000000-0xe2ffffff]
    [ 0.539545] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.539577] NET: Registered protocol family 2
    [ 0.539768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.539937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.540076] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.540097] TCP: reno registered
    [ 0.540110] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.540141] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.540216] NET: Registered protocol family 1
    [ 0.540228] pci 0000:00:02.0: Boot video device
    [ 0.540306] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.540308] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.540406] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.540596] PCI: CLS 64 bytes, default 64
    [ 0.540638] Unpacking initramfs...
    [ 0.613961] Freeing initrd memory: 3204K (ffff88007fcdf000 - ffff880080000000)
    [ 0.613966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.613969] software IO TLB [mem 0xb61b3000-0xba1b3000] (64MB) mapped at [ffff8800b61b3000-ffff8800ba1b2fff]
    [ 0.614132] Scanning for low memory corruption every 60 seconds
    [ 0.614413] audit: initializing netlink socket (disabled)
    [ 0.614424] type=2000 audit(1396028730.569:1): initialized
    [ 0.630220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.631594] zbud: loaded
    [ 0.631777] VFS: Disk quotas dquot_6.5.2
    [ 0.631820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.631982] msgmni has been set to 15770
    [ 0.632038] Key type big_key registered
    [ 0.632238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.632273] io scheduler noop registered
    [ 0.632275] io scheduler deadline registered
    [ 0.632301] io scheduler cfq registered (default)
    [ 0.632797] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.632812] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.632861] efifb: probing for efifb
    [ 0.634403] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 8100k, total 8100k
    [ 0.634405] efifb: mode is 1920x1080x32, linelength=7680, pages=1
    [ 0.634406] efifb: scrolling: redraw
    [ 0.634408] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.640993] Console: switching to colour frame buffer device 240x67
    [ 0.647481] fb0: EFI VGA frame buffer device
    [ 0.647490] intel_idle: MWAIT substates: 0x11142120
    [ 0.647491] intel_idle: v0.4 model 0x45
    [ 0.647492] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.647675] GHES: HEST is not enabled!
    [ 0.647727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.648142] Linux agpgart interface v0.103
    [ 0.648200] rtc_cmos 00:05: RTC can wake from S4
    [ 0.648326] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.648354] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.648365] Intel P-state driver initializing.
    [ 0.648375] Intel pstate controlling: cpu 0
    [ 0.648400] Intel pstate controlling: cpu 1
    [ 0.648412] Intel pstate controlling: cpu 2
    [ 0.648421] Intel pstate controlling: cpu 3
    [ 0.648546] drop_monitor: Initializing network drop monitor service
    [ 0.648595] TCP: cubic registered
    [ 0.648677] NET: Registered protocol family 10
    [ 0.648811] NET: Registered protocol family 17
    [ 0.648818] Key type dns_resolver registered
    [ 0.649004] registered taskstats version 1
    [ 0.649644] Magic number: 6:126:796
    [ 0.649712] rtc_cmos 00:05: setting system clock to 2014-03-28 17:45:31 UTC (1396028731)
    [ 0.649748] PM: Hibernation image not present or could not be loaded.
    [ 0.650354] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 0.650355] Write protecting the kernel read-only data: 8192k
    [ 0.652045] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
    [ 0.652685] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
    [ 0.657971] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.658953] systemd-udevd[56]: starting version 211
    [ 0.671084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.675200] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.675211] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.679063] ACPI: bus type USB registered
    [ 0.679140] usbcore: registered new interface driver usbfs
    [ 0.679147] usbcore: registered new interface driver hub
    [ 0.679183] usbcore: registered new device driver usb
    [ 0.679907] rtsx_pci 0000:03:00.0: irq 56 for MSI/MSI-X
    [ 0.679921] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 56
    [ 0.680383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.680779] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.680781] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.680814] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.680820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.680893] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.680910] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
    [ 0.681298] SCSI subsystem initialized
    [ 0.682133] ehci-pci: EHCI PCI platform driver
    [ 0.682152] libata version 3.00 loaded.
    [ 0.682614] hub 1-0:1.0: USB hub found
    [ 0.682629] hub 1-0:1.0: 9 ports detected
    [ 0.684167] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.684171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.684312] hub 2-0:1.0: USB hub found
    [ 0.684323] hub 2-0:1.0: 4 ports detected
    [ 0.686657] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.686662] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.686674] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.690559] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.690585] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe361d000
    [ 0.699417] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.699600] hub 3-0:1.0: USB hub found
    [ 0.699606] hub 3-0:1.0: 3 ports detected
    [ 0.699755] ahci 0000:00:1f.2: version 3.0
    [ 0.699897] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
    [ 0.712779] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.712783] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.713215] scsi0 : ahci
    [ 0.713307] scsi1 : ahci
    [ 0.713387] scsi2 : ahci
    [ 0.713484] scsi3 : ahci
    [ 0.713533] ata1: SATA max UDMA/133 abar m2048@0xe361c000 port 0xe361c100 irq 58
    [ 0.713535] ata2: DUMMY
    [ 0.713536] ata3: DUMMY
    [ 0.713537] ata4: DUMMY
    [ 0.716082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.032692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.039030] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.039119] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
    [ 1.039122] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 1.042744] usb 1-4: new low-speed USB device number 2 using xhci_hcd
    [ 1.045496] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.045588] ata1.00: configured for UDMA/133
    [ 1.045794] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
    [ 1.047782] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.047862] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.047865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.047891] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.058547] usb 1-4: config 1 has an invalid interface number: 1 but max is 0
    [ 1.058551] usb 1-4: config 1 has no interface number 0
    [ 1.060336] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.063706] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.068657] usbcore: registered new interface driver usbhid
    [ 1.068661] usbhid: USB HID core driver
    [ 1.103349] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
    [ 1.104072] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.222575] usb 1-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.475839] usb 1-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.615761] tsc: Refined TSC clocksource calibration: 1795.842 MHz
    [ 1.649158] usb 1-7: new full-speed USB device number 5 using xhci_hcd
    [ 1.664033] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.672757] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input2
    [ 1.672889] hid-multitouch 0003:04F3:0206.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
    [ 1.775780] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.899629] hub 3-1:1.0: USB hub found
    [ 1.899695] hub 3-1:1.0: 8 ports detected
    [ 2.457525] random: nonblocking pool is initialized
    [ 2.615440] Switched to clocksource tsc
    [ 2.647237] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.254903] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [ 3.255062] systemd[1]: Detected architecture 'x86-64'.
    [ 3.260574] systemd[1]: Set hostname to <GLaDOS>.
    [ 3.894501] systemd[1]: Starting Login Prompts.
    [ 3.894597] systemd[1]: Reached target Login Prompts.
    [ 3.894608] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.894664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.894672] systemd[1]: Starting Remote File Systems.
    [ 3.894742] systemd[1]: Reached target Remote File Systems.
    [ 3.894756] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.894782] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.894789] systemd[1]: Starting Paths.
    [ 3.894848] systemd[1]: Reached target Paths.
    [ 3.894866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.895033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.895044] systemd[1]: Starting Encrypted Volumes.
    [ 3.895105] systemd[1]: Reached target Encrypted Volumes.
    [ 3.895115] systemd[1]: Expecting device dev-disk-by\x2duuid-8cdc5395\x2dad83\x2d429c\x2d95af\x2d73bc6b769621.device...
    [ 3.895196] systemd[1]: Starting EFI System Partition Automount.
    [ 3.895321] systemd[1]: Set up automount EFI System Partition Automount.
    [ 3.895330] systemd[1]: Expecting device dev-disk-by\x2duuid-BE9C\x2dD69C.device...
    [ 3.895395] systemd[1]: Starting Root Slice.
    [ 3.898003] systemd[1]: Created slice Root Slice.
    [ 3.898010] systemd[1]: Starting User and Session Slice.
    [ 3.898131] systemd[1]: Created slice User and Session Slice.
    [ 3.898137] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.898192] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.898197] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.898262] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.898268] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.898329] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.898334] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.898386] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.898393] systemd[1]: Starting udev Control Socket.
    [ 3.898437] systemd[1]: Listening on udev Control Socket.
    [ 3.898443] systemd[1]: Starting udev Kernel Socket.
    [ 3.898488] systemd[1]: Listening on udev Kernel Socket.
    [ 3.898494] systemd[1]: Starting Journal Socket.
    [ 3.898549] systemd[1]: Listening on Journal Socket.
    [ 3.898558] systemd[1]: Starting System Slice.
    [ 3.898674] systemd[1]: Created slice System Slice.
    [ 3.898682] systemd[1]: Starting File System Check on Root Device...
    [ 3.898945] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 3.899095] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 3.899104] systemd[1]: Mounting Temporary Directory...
    [ 3.917769] systemd[1]: Starting system-getty.slice.
    [ 3.918013] systemd[1]: Created slice system-getty.slice.
    [ 3.956377] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.956919] systemd[1]: Mounting Debug File System...
    [ 3.968760] systemd[1]: Starting Apply Kernel Variables...
    [ 3.969194] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.980915] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.980935] systemd[1]: Starting Setup Virtual Console...
    [ 3.982172] systemd[1]: Started Load Kernel Modules.
    [ 3.982193] systemd[1]: Mounted FUSE Control File System.
    [ 3.982211] systemd[1]: Mounting Configuration File System...
    [ 3.982612] systemd[1]: Mounting Huge Pages File System...
    [ 3.983050] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.983622] systemd[1]: Starting Journal Service...
    [ 3.984025] systemd[1]: Started Journal Service.
    [ 5.215071] systemd-udevd[143]: starting version 211
    [ 5.215716] EXT4-fs (sda10): re-mounted. Opts: data=ordered
    [ 5.979664] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6.251597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 6.260869] ACPI: Lid Switch [LID0]
    [ 6.260910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    [ 6.260913] ACPI: Power Button [PWRB]
    [ 6.260940] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
    [ 6.260942] ACPI: Sleep Button [SBTN]
    [ 6.260969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 6.260971] ACPI: Power Button [PWRF]
    [ 6.316336] wmi: Mapper loaded
    [ 6.325574] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.325577] ACPI: Thermal Zone [THM] (48 C)
    [ 6.325814] ACPI: AC Adapter [AC] (off-line)
    [ 6.325890] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.355035] [drm] Initialized drm 1.1.0 20060810
    [ 6.398515] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 6.511173] input: 2.4GHZ RF ONLY MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input10
    [ 6.511296] hid-generic 0003:1BCF:0535.0001: input,hiddev0,hidraw1: USB HID v1.00 Mouse [2.4GHZ RF ONLY MOUSE] on usb-0000:00:14.0-4/input1
    [ 6.778869] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127800, board id: 2788, fw id: 1480745
    [ 6.814920] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 6.935874] mousedev: PS/2 mouse device common for all mice
    [ 6.974228] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [ 6.974578] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
    [ 6.974609] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 6.978615] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.978620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978623] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
    [ 6.978625] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
    [ 6.978628] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 6.978629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978630] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
    [ 6.978632] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
    [ 6.978634] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
    [ 6.978636] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 4 (20131115/utaddress-251)
    [ 6.978637] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.IOPH 5 (20131115/utaddress-251)
    [ 6.978639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978640] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 6.978725] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 6.978730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.979647] [drm] Memory usable by graphics device = 2048M
    [ 6.979651] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
    [ 6.979652] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 6.979667] Console: switching to colour dummy device 80x25
    [ 7.027190] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 7.027200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 7.027201] [drm] Driver supports precise vblank timestamp query.
    [ 7.027320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 7.080108] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.086677] fbcon: inteldrmfb (fb0) is primary device
    [ 7.168718] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 7.168718] Copyright(c) 2003-2013 Intel Corporation
    [ 7.168873] iwlwifi 0000:02:00.0: irq 62 for MSI/MSI-X
    [ 7.226143] Bluetooth: Core ver 2.17
    [ 7.226154] NET: Registered protocol family 31
    [ 7.226154] Bluetooth: HCI device and connection manager initialized
    [ 7.226160] Bluetooth: HCI socket layer initialized
    [ 7.226161] Bluetooth: L2CAP socket layer initialized
    [ 7.226163] Bluetooth: SCO socket layer initialized
    [ 7.242079] usbcore: registered new interface driver btusb
    [ 7.244675] media: Linux media interface: v0.10
    [ 7.256730] Bluetooth: hci0: read Intel version: 370710018002030d33
    [ 7.256731] Bluetooth: hci0: Intel device is already patched. patch num: 33
    [ 7.259309] Linux video capture interface: v2.00
    [ 7.273794] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6705)
    [ 7.312920] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
    [ 7.312987] usbcore: registered new interface driver uvcvideo
    [ 7.312988] USB Video Class driver (1.1.1)
    [ 7.374427] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 7.455740] iTCO_vendor_support: vendor-support=0
    [ 7.478306] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 7.478331] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 7.478424] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.731609] input: Dell WMI hotkeys as /devices/virtual/input/input13
    [ 8.366783] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 8.740790] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.740799] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
    [ 8.746908] r8169 0000:03:00.1: irq 63 for MSI/MSI-X
    [ 8.747108] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90004ef6000, e0:db:55:c1:a4:84, XID 1c800880 IRQ 63
    [ 8.747110] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 8.749881] Console: switching to colour frame buffer device 240x67
    [ 8.755049] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 8.755050] i915 0000:00:02.0: registered panic notifier
    [ 8.755385] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1117)
    [ 8.755388] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
    [ 8.755439] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14
    [ 8.756847] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.757196] acpi device:4a: registered as cooling_device4
    [ 8.757318] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15
    [ 8.757484] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.762426] iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
    [ 8.763348] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
    [ 8.810630] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
    [ 8.810704] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 8.810940] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 8.822328] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [ 8.822359] platform microcode: Direct firmware load failed with error -2
    [ 8.822364] platform microcode: Falling back to user helper
    [ 8.770050] systemd-udevd[156]: renamed network interface eth0 to enp3s0f1
    [ 8.822931] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [ 8.822943] platform microcode: Direct firmware load failed with error -2
    [ 8.822944] platform microcode: Falling back to user helper
    [ 8.823271] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [ 8.823284] platform microcode: Direct firmware load failed with error -2
    [ 8.823286] platform microcode: Falling back to user helper
    [ 8.823582] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [ 8.823590] platform microcode: Direct firmware load failed with error -2
    [ 8.823592] platform microcode: Falling back to user helper
    [ 8.823879] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 9.143183] Adding 16777212k swap on /dev/sda8. Priority:-1 extents:1 across:16777212k FS
    [ 9.194383] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
    [ 9.194453] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
    [ 9.194518] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
    [ 9.260650] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 9.639211] systemd-journald[126]: Received request to flush runtime journal from PID 1
    [ 9.662917] intel_rapl: domain uncore energy ctr 26416:26416 not working, skip
    [ 17.212850] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 17.213080] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 17.225790] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    [ 17.335522] r8169 0000:03:00.1 enp3s0f1: link down
    [ 17.335561] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
    [ 18.882354] bbswitch: version 0.8
    [ 18.882360] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 18.882367] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
    [ 9.289785] systemd-udevd[150]: renamed network interface wlan0 to wlp2s0
    [ 18.882376] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM:
    [ 18.882379] Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 18.882497] bbswitch: detected an Optimus _DSM function
    [ 18.882511] pci 0000:04:00.0: enabling device (0006 -> 0007)
    [ 18.882569] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
    [ 18.884220] bbswitch: disabling discrete graphics
    [ 18.884227] ACPI Warning

    Hi, I have the same laptop and had the same problem.
    I have solved it by adding the following arguments to the kernel command line:
    acpi_osi=Linux acpi_backlight=vendor
    Note: acpi_osi only did the trick, but then the backlight service fails. acpi_backlight fixes the service.

  • Session state always invalid after login

    Hello community,
    i have a functional login process which uses my own login with username and password. After login i branch to application start page, but this session now is different from the start login session, so every login is invalid and will branch to authentication scheme invalid page.
    My login url is: f?p=100:100:123456
    After correct login (i have tested in the database with a lot of inserts into tmp_table)
    i want to branch with the standard login procedure wwv_flow_custom_auth_std.login() to page 1000.
    The correct url is shown in the browser, but the current page is the login page 100, because (i think) the session is invalid. In the authentication theme the invalid session page is set to page 100.
    I have tested several pages and always this page is branched.
    So im shure, that the session state is always invalid after login.
    But why ????
    Has anyone an idea ?
    Thank you for responding.
    Frank

    Hi Jari,
    problem was solved.
    The IE8 has cached an invalid site.
    I know now were it is come from.
    I have an after submit process which sets the cookie with following code:
    owa_util.mime_header('text/html; charset=UTF-8;', FALSE);
    owa_cookie.send(
    name=>'DHW_COOKIE',
    value=>utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5(input_string => ':P100_REGCODE' || :P100_USERNAME ))
    owa_util.http_header_close;
    But this results in display on the screen like html text without tags, so it looks like text on the screen header.
    It shows "content-type=text/html charset=WINDOWS 1252 .......
    The cookie is not set to the disk and now the IE8 explorer is dead.
    The described problem of this thread is shown.
    If you close all sessions and restart IE8 then the error is fixed.
    Also i have disabled the after submit process with setting the cookie.
    So i live now without having a cookie set.
    Do you have any idea for this behaviour ?
    Frank

  • Wireless mouse pointer which does not move after boot *sometimes*

    Hi,
    I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
    After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
    I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
    This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
    Has anyone an idea?
    Last edited by zebulon (2012-03-21 07:22:53)

    Thanks.
    Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
    Not working:
    [ 22.745]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 22.765] X Protocol Version 11, Revision 0
    [ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
    [ 22.765] Build Date: 05 March 2012 05:59:48AM
    [ 22.765]
    [ 22.765] Current version of pixman: 0.24.4
    [ 22.765] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
    [ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.841] (==) No Layout section. Using the first Screen section.
    [ 22.841] (**) |-->Screen "screen1" (0)
    [ 22.841] (**) | |-->Monitor "monitor1"
    [ 22.841] (**) | |-->Device "device1"
    [ 22.841] (**) Option "IgnoreABI" "True"
    [ 22.841] (**) Ignoring ABI Version
    [ 22.841] (==) Automatically adding devices
    [ 22.841] (==) Automatically enabling devices
    [ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 22.866] Entry deleted from font path.
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.871] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.871] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.871] (II) Loader magic: 0x7cef60
    [ 22.871] (II) Module ABI versions:
    [ 22.871] X.Org ANSI C Emulation: 0.4
    [ 22.871] X.Org Video Driver: 12.0
    [ 22.871] X.Org XInput driver : 16.0
    [ 22.871] X.Org Server Extension : 6.0
    [ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "record" will be loaded by default.
    [ 22.872] (II) "dri" will be loaded even though the default is to disable it.
    [ 22.872] (II) "dri2" will be loaded by default.
    [ 22.872] (II) LoadModule: "dbe"
    [ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.955] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.955] compiled for 1.12.0, module version = 1.0.0
    [ 22.955] Module class: X.Org Server Extension
    [ 22.955] ABI class: X.Org Server Extension, version 6.0
    [ 22.955] (II) Loading extension DOUBLE-BUFFER
    [ 22.955] (II) LoadModule: "v4l"
    [ 22.955] (WW) Warning, couldn't open module v4l
    [ 22.955] (II) UnloadModule: "v4l"
    [ 22.955] (II) Unloading v4l
    [ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 22.955] (II) LoadModule: "extmod"
    [ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.968] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.968] compiled for 1.12.0, module version = 1.0.0
    [ 22.968] Module class: X.Org Server Extension
    [ 22.968] ABI class: X.Org Server Extension, version 6.0
    [ 22.968] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.968] (II) Loading extension XFree86-VidModeExtension
    [ 22.968] (II) Loading extension XFree86-DGA
    [ 22.968] (II) Loading extension DPMS
    [ 22.968] (II) Loading extension XVideo
    [ 22.968] (II) Loading extension XVideo-MotionCompensation
    [ 22.968] (II) Loading extension X-Resource
    [ 22.968] (II) LoadModule: "glx"
    [ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
    [ 24.018] compiled for 4.0.2, module version = 1.0.0
    [ 24.018] Module class: X.Org Server Extension
    [ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 24.018] (II) Loading extension GLX
    [ 24.018] (II) LoadModule: "record"
    [ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 24.026] (II) Module record: vendor="X.Org Foundation"
    [ 24.026] compiled for 1.12.0, module version = 1.13.0
    [ 24.026] Module class: X.Org Server Extension
    [ 24.026] ABI class: X.Org Server Extension, version 6.0
    [ 24.026] (II) Loading extension RECORD
    [ 24.026] (II) LoadModule: "dri2"
    [ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.034] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.034] compiled for 1.12.0, module version = 1.2.0
    [ 24.034] ABI class: X.Org Server Extension, version 6.0
    [ 24.034] (II) Loading extension DRI2
    [ 24.034] (II) LoadModule: "nvidia"
    [ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 24.120] compiled for 4.0.2, module version = 1.0.0
    [ 24.120] Module class: X.Org Video Driver
    [ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 24.161] (++) using VT number 7
    [ 24.734] (II) Loading sub module "fb"
    [ 24.734] (II) LoadModule: "fb"
    [ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.832] (II) Module fb: vendor="X.Org Foundation"
    [ 24.832] compiled for 1.12.0, module version = 1.0.0
    [ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.832] (II) Loading sub module "wfb"
    [ 24.832] (II) LoadModule: "wfb"
    [ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.003] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.003] compiled for 1.12.0, module version = 1.0.0
    [ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.003] (II) Loading sub module "ramdac"
    [ 27.003] (II) LoadModule: "ramdac"
    [ 27.003] (II) Module "ramdac" already built-in
    [ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 29.070] (==) NVIDIA(0): RGB weight 888
    [ 29.070] (==) NVIDIA(0): Default visual is TrueColor
    [ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
    [ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 31.411] (II) NVIDIA(GPU-0): stereo.
    [ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 31.503] (**) NVIDIA(0): enabled on all display devices.)
    [ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 31.538] (II) NVIDIA(0): Validated modes:
    [ 31.538] (II) NVIDIA(0): "1920x1080"
    [ 31.538] (II) NVIDIA(0): "1280x720"
    [ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 31.566] (--) Depth 24 pixmap format is 32 bpp
    [ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 31.571] (II) NVIDIA(0): Config Options in the README.
    [ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 31.608] (II) Loading extension NV-GLX
    [ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 31.630] (==) NVIDIA(0): Backing store disabled
    [ 31.630] (==) NVIDIA(0): Silken mouse enabled
    [ 31.631] (**) NVIDIA(0): DPMS enabled
    [ 31.631] (II) Loading extension NV-CONTROL
    [ 31.631] (II) Loading extension XINERAMA
    [ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 31.631] (II) Loading sub module "dri2"
    [ 31.631] (II) LoadModule: "dri2"
    [ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 31.631] (II) Module dri2: vendor="X.Org Foundation"
    [ 31.631] compiled for 1.12.0, module version = 1.2.0
    [ 31.631] ABI class: X.Org Server Extension, version 6.0
    [ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
    [ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 31.631] (==) RandR enabled
    [ 31.631] (II) Initializing built-in extension Generic Event Extension
    [ 31.631] (II) Initializing built-in extension SHAPE
    [ 31.631] (II) Initializing built-in extension MIT-SHM
    [ 31.631] (II) Initializing built-in extension XInputExtension
    [ 31.631] (II) Initializing built-in extension XTEST
    [ 31.631] (II) Initializing built-in extension BIG-REQUESTS
    [ 31.631] (II) Initializing built-in extension SYNC
    [ 31.631] (II) Initializing built-in extension XKEYBOARD
    [ 31.631] (II) Initializing built-in extension XC-MISC
    [ 31.631] (II) Initializing built-in extension SECURITY
    [ 31.631] (II) Initializing built-in extension XINERAMA
    [ 31.631] (II) Initializing built-in extension XFIXES
    [ 31.631] (II) Initializing built-in extension RENDER
    [ 31.631] (II) Initializing built-in extension RANDR
    [ 31.631] (II) Initializing built-in extension COMPOSITE
    [ 31.631] (II) Initializing built-in extension DAMAGE
    [ 31.632] (II) Initializing extension GLX
    [ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.105] (II) LoadModule: "evdev"
    [ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 32.188] (II) Module evdev: vendor="X.Org Foundation"
    [ 32.188] compiled for 1.12.0, module version = 2.7.0
    [ 32.188] Module class: X.Org XInput Driver
    [ 32.188] ABI class: X.Org XInput driver, version 16.0
    [ 32.188] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.188] (**) Power Button: always reports core events
    [ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.188] (--) evdev: Power Button: Found keys
    [ 32.188] (II) evdev: Power Button: Configuring as keyboard
    [ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 32.188] (**) Option "xkb_rules" "evdev"
    [ 32.188] (**) Option "xkb_model" "evdev"
    [ 32.188] (**) Option "xkb_layout" "gb"
    [ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.240] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.240] (**) Power Button: always reports core events
    [ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.241] (--) evdev: Power Button: Found keys
    [ 32.241] (II) evdev: Power Button: Configuring as keyboard
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
    [ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 32.241] (**) UVC Camera (046d:09a4): always reports core events
    [ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
    [ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
    [ 32.242] (**) Option "xkb_rules" "evdev"
    [ 32.242] (**) Option "xkb_model" "evdev"
    [ 32.242] (**) Option "xkb_layout" "gb"
    [ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 32.242] (II) No input driver specified, ignoring this device.
    [ 32.242] (II) This device may have been added with another device file.
    Working:
    [ 21.623]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 21.642] X Protocol Version 11, Revision 0
    [ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
    [ 21.642] Build Date: 05 March 2012 05:59:48AM
    [ 21.642]
    [ 21.642] Current version of pixman: 0.24.4
    [ 21.642] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
    [ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21.727] (==) No Layout section. Using the first Screen section.
    [ 21.727] (**) |-->Screen "screen1" (0)
    [ 21.727] (**) | |-->Monitor "monitor1"
    [ 21.727] (**) | |-->Device "device1"
    [ 21.727] (**) Option "IgnoreABI" "True"
    [ 21.727] (**) Ignoring ABI Version
    [ 21.727] (==) Automatically adding devices
    [ 21.727] (==) Automatically enabling devices
    [ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21.752] Entry deleted from font path.
    [ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.757] Entry deleted from font path.
    [ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.765] Entry deleted from font path.
    [ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.765] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21.765] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21.765] (II) Loader magic: 0x7cef60
    [ 21.765] (II) Module ABI versions:
    [ 21.765] X.Org ANSI C Emulation: 0.4
    [ 21.765] X.Org Video Driver: 12.0
    [ 21.765] X.Org XInput driver : 16.0
    [ 21.765] X.Org Server Extension : 6.0
    [ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "record" will be loaded by default.
    [ 21.766] (II) "dri" will be loaded even though the default is to disable it.
    [ 21.766] (II) "dri2" will be loaded by default.
    [ 21.766] (II) LoadModule: "dbe"
    [ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 21.833] (II) Module dbe: vendor="X.Org Foundation"
    [ 21.833] compiled for 1.12.0, module version = 1.0.0
    [ 21.833] Module class: X.Org Server Extension
    [ 21.833] ABI class: X.Org Server Extension, version 6.0
    [ 21.833] (II) Loading extension DOUBLE-BUFFER
    [ 21.833] (II) LoadModule: "v4l"
    [ 21.833] (WW) Warning, couldn't open module v4l
    [ 21.833] (II) UnloadModule: "v4l"
    [ 21.833] (II) Unloading v4l
    [ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 21.833] (II) LoadModule: "extmod"
    [ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 21.846] (II) Module extmod: vendor="X.Org Foundation"
    [ 21.846] compiled for 1.12.0, module version = 1.0.0
    [ 21.846] Module class: X.Org Server Extension
    [ 21.846] ABI class: X.Org Server Extension, version 6.0
    [ 21.846] (II) Loading extension MIT-SCREEN-SAVER
    [ 21.846] (II) Loading extension XFree86-VidModeExtension
    [ 21.846] (II) Loading extension XFree86-DGA
    [ 21.846] (II) Loading extension DPMS
    [ 21.846] (II) Loading extension XVideo
    [ 21.846] (II) Loading extension XVideo-MotionCompensation
    [ 21.846] (II) Loading extension X-Resource
    [ 21.846] (II) LoadModule: "glx"
    [ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
    [ 22.913] compiled for 4.0.2, module version = 1.0.0
    [ 22.913] Module class: X.Org Server Extension
    [ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 22.913] (II) Loading extension GLX
    [ 22.913] (II) LoadModule: "record"
    [ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.921] (II) Module record: vendor="X.Org Foundation"
    [ 22.921] compiled for 1.12.0, module version = 1.13.0
    [ 22.921] Module class: X.Org Server Extension
    [ 22.921] ABI class: X.Org Server Extension, version 6.0
    [ 22.921] (II) Loading extension RECORD
    [ 22.921] (II) LoadModule: "dri2"
    [ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.929] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.929] compiled for 1.12.0, module version = 1.2.0
    [ 22.929] ABI class: X.Org Server Extension, version 6.0
    [ 22.929] (II) Loading extension DRI2
    [ 22.929] (II) LoadModule: "nvidia"
    [ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 23.014] compiled for 4.0.2, module version = 1.0.0
    [ 23.014] Module class: X.Org Video Driver
    [ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 23.047] (++) using VT number 7
    [ 23.721] (II) Loading sub module "fb"
    [ 23.721] (II) LoadModule: "fb"
    [ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.428] (II) Module fb: vendor="X.Org Foundation"
    [ 24.428] compiled for 1.12.0, module version = 1.0.0
    [ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.428] (II) Loading sub module "wfb"
    [ 24.428] (II) LoadModule: "wfb"
    [ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 26.531] (II) Module wfb: vendor="X.Org Foundation"
    [ 26.531] compiled for 1.12.0, module version = 1.0.0
    [ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.531] (II) Loading sub module "ramdac"
    [ 26.531] (II) LoadModule: "ramdac"
    [ 26.531] (II) Module "ramdac" already built-in
    [ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 27.811] (==) NVIDIA(0): RGB weight 888
    [ 27.811] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 29.881] (II) NVIDIA(GPU-0): stereo.
    [ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 29.997] (**) NVIDIA(0): enabled on all display devices.)
    [ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 30.033] (II) NVIDIA(0): Validated modes:
    [ 30.033] (II) NVIDIA(0): "1920x1080"
    [ 30.033] (II) NVIDIA(0): "1280x720"
    [ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 30.068] (--) Depth 24 pixmap format is 32 bpp
    [ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 30.072] (II) NVIDIA(0): Config Options in the README.
    [ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 30.119] (II) Loading extension NV-GLX
    [ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 30.149] (==) NVIDIA(0): Backing store disabled
    [ 30.149] (==) NVIDIA(0): Silken mouse enabled
    [ 30.149] (**) NVIDIA(0): DPMS enabled
    [ 30.149] (II) Loading extension NV-CONTROL
    [ 30.150] (II) Loading extension XINERAMA
    [ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 30.150] (II) Loading sub module "dri2"
    [ 30.150] (II) LoadModule: "dri2"
    [ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 30.150] (II) Module dri2: vendor="X.Org Foundation"
    [ 30.150] compiled for 1.12.0, module version = 1.2.0
    [ 30.150] ABI class: X.Org Server Extension, version 6.0
    [ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
    [ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 30.150] (==) RandR enabled
    [ 30.150] (II) Initializing built-in extension Generic Event Extension
    [ 30.150] (II) Initializing built-in extension SHAPE
    [ 30.150] (II) Initializing built-in extension MIT-SHM
    [ 30.150] (II) Initializing built-in extension XInputExtension
    [ 30.150] (II) Initializing built-in extension XTEST
    [ 30.150] (II) Initializing built-in extension BIG-REQUESTS
    [ 30.150] (II) Initializing built-in extension SYNC
    [ 30.150] (II) Initializing built-in extension XKEYBOARD
    [ 30.150] (II) Initializing built-in extension XC-MISC
    [ 30.150] (II) Initializing built-in extension SECURITY
    [ 30.150] (II) Initializing built-in extension XINERAMA
    [ 30.150] (II) Initializing built-in extension XFIXES
    [ 30.150] (II) Initializing built-in extension RENDER
    [ 30.150] (II) Initializing built-in extension RANDR
    [ 30.150] (II) Initializing built-in extension COMPOSITE
    [ 30.150] (II) Initializing built-in extension DAMAGE
    [ 30.151] (II) Initializing extension GLX
    [ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.624] (II) LoadModule: "evdev"
    [ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 30.633] (II) Module evdev: vendor="X.Org Foundation"
    [ 30.633] compiled for 1.12.0, module version = 2.7.0
    [ 30.633] Module class: X.Org XInput Driver
    [ 30.633] ABI class: X.Org XInput driver, version 16.0
    [ 30.633] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.633] (**) Power Button: always reports core events
    [ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.633] (--) evdev: Power Button: Found keys
    [ 30.633] (II) evdev: Power Button: Configuring as keyboard
    [ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 30.633] (**) Option "xkb_rules" "evdev"
    [ 30.633] (**) Option "xkb_model" "evdev"
    [ 30.633] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.677] (**) Power Button: always reports core events
    [ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.677] (--) evdev: Power Button: Found keys
    [ 30.677] (II) evdev: Power Button: Configuring as keyboard
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 30.677] (**) Option "xkb_rules" "evdev"
    [ 30.677] (**) Option "xkb_model" "evdev"
    [ 30.677] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
    [ 30.677] (II) No input driver specified, ignoring this device.
    [ 30.677] (II) This device may have been added with another device file.
    [ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
    [ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
    [ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 30.678] (**) UVC Camera (046d:09a4): always reports core events
    [ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
    [ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 30.678] (II) No input driver specified, ignoring this device.
    [ 30.678] (II) This device may have been added with another device file.
    I note the differences start there:
    (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    vs
    (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    Could my Logitech camera interfere with the keyboard/mouse unifier detection?

  • Disable network boot screen in KT4V-L

    well this is more of an annoyance than a problem . . .
    i was booting up a few days ago and on the screen where u can press (BIOS 1.5 and previous) or (BIOS 1.6) to boot from a network . . .
    now i decided to venture into this menu and played around with the options and now a new option comes up after the / screen comes on . . .
    it now says something like "press to boot from hard disk" . . . now is there a way to disable this message of booting from the hard disk? or the whole network booting option at all?
    my pc boots up fine and i haven't experienced any problems but it just takes up a lot more time to boot into windows . . . i've tried every bios setting possible from disabling everything in the boot menu order, to  disabling the network adapter . . . now the only thing that works is by disabling the onboard adapter which i use . . . i've also tried flashing to other bioses in hopes to reset it but it hasn't done anything . . .
    does anyone have any suggestions on how to disable this?

    oh this is before windows even loads up . . . it's a message from the bios/lan rom itself asking to press to boot from the hard disk or pressing to boot from a network . . . in fact, i get no slowdowns going into windows at all . . .
    when u do a cold boot, u get the following screens:
    1. the main post screen where u're ide devices get detected
    2. the screen that i described above comes up where u press and for network booting
    3. the computer configuration info (pci devices, cpu, cache info, etc)
    4. boot record search from the floppy/hd/cdrom
    5. windows boot screen
    it's screen #2 that i'm trying to disable . . .

  • Keyboard and mouse not working after boot

    Hello!
    it's my first time here
    I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
    I have also posted it on linuxquestions:
    http://www.linuxquestions.org/questions … ot-934040/
    What might be causing that problem?
    and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

    when booting into runlevel 3, the keyboard and mouse works fine.
    my pacman.log(only for the update day) and messages.log are:
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 11:35:37 myhost dhcpcd[2756]: eth0: eth0: MTU set to 576
    Mar 11 11:39:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:39:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:39:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:42:11 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:42:11 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:42:11 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:44:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:44:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:44:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:06:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:06:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:06:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:16:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:16:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:16:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:19:15 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:19:15 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:19:15 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:21:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:21:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:21:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:23:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:23:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:23:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:31:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:31:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:31:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:34:26 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:34:26 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:34:26 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 12:35:37 myhost dhcpcd[2926]: eth0: eth0: MTU set to 576
    Mar 11 12:36:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:36:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:36:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:40:27 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:40:27 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:40:27 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:52:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:52:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:52:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:55:00 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:55:00 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:55:00 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:57:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:57:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:57:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 13:21:01 myhost -- MARK --
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 13:35:37 myhost dhcpcd[3041]: eth0: eth0: MTU set to 576
    Mar 11 13:55:37 myhost -- MARK --
    Mar 11 14:21:01 myhost -- MARK --
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 14:35:37 myhost dhcpcd[3095]: eth0: eth0: MTU set to 576
    Mar 11 14:55:37 myhost -- MARK --
    Mar 11 15:21:01 myhost -- MARK --
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 15:35:38 myhost dhcpcd[3144]: eth0: eth0: MTU set to 576
    Mar 11 15:55:38 myhost -- MARK --
    Mar 11 16:21:01 myhost -- MARK --
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 16:35:38 myhost dhcpcd[3192]: eth0: eth0: MTU set to 576
    Mar 11 16:51:02 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 16:51:02 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 16:51:02 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:21:01 myhost -- MARK --
    Mar 11 17:27:48 myhost init: Trying to re-exec init
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:25 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:05 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:31:15 myhost kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 17:35:38 myhost dhcpcd[6669]: eth0: eth0: MTU set to 576
    Mar 11 17:55:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:55:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:55:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:57:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:57:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:57:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:00:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:00:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:00:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:17:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:17:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:17:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 18:35:38 myhost dhcpcd[7243]: eth0: eth0: MTU set to 576
    Mar 11 18:55:39 myhost -- MARK --
    Mar 11 19:21:01 myhost -- MARK --
    Mar 11 19:27:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:27:04 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:27:04 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:29:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:29:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:29:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:32:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:32:03 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:32:03 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:34:05 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:34:05 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:34:05 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 19:35:38 myhost dhcpcd[8708]: eth0: eth0: MTU set to 576
    Mar 11 19:55:38 myhost -- MARK --
    Mar 11 20:21:01 myhost -- MARK --
    Mar 11 20:32:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:32:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:32:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:34:42 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:34:42 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:34:42 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 20:35:38 myhost dhcpcd[10147]: eth0: eth0: MTU set to 576
    Mar 11 20:37:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:37:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:37:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:48:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:48:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:48:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:54:44 myhost shutdown[10347]: shutting down for system halt
    Mar 11 20:54:44 myhost init: Switching to runlevel: 0
    Mar 11 20:54:48 myhost dhcpcd[10522]: sending signal 1 to pid 1269
    Mar 11 20:54:48 myhost dhcpcd[1269]: received SIGHUP, releasing
    Mar 11 20:54:48 myhost dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
    Mar 11 20:54:48 myhost dhcpcd[10522]: waiting for pid 1269 to exit
    Mar 11 20:54:48 myhost dhcpcd[10527]: eth0: eth0: MTU restored to 1500
    Mar 11 20:54:49 myhost dhcpcd[1269]: eth0: removing interface
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMI present.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] RAMDISK: 3759a000 - 37ff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 10:25:59 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 10:25:59 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Mar 12 10:25:59 myhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Policy zone: Normal
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Checking aperture...
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Node 0: aperture @ 748000000 size 32 MB
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Aperture beyond 4GB. Ignoring.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] This costs you 64 MB of RAM
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Console: colour VGA+ 80x25
    Mar 12 10:25:59 myhost kernel: [ 0.000000] console [tty0] enabled
    Mar 12 10:25:59 myhost kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Fast TSC calibration using PIT
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Detected 2109.668 MHz processor.
    Mar 12 10:25:59 myhost kernel: [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
    Mar 12 10:25:59 myhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
    Mar 12 10:25:59 myhost kernel: [ 0.003370] Security Framework initialized
    Mar 12 10:25:59 myhost kernel: [ 0.003376] AppArmor: AppArmor disabled by boot time parameter
    Mar 12 10:25:59 myhost kernel: [ 0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007954] Mount-cache hash table entries: 256
    Mar 12 10:25:59 myhost kernel: [ 0.008114] Initializing cgroup subsys cpuacct
    Mar 12 10:25:59 myhost kernel: [ 0.008121] Initializing cgroup subsys memory
    Mar 12 10:25:59 myhost kernel: [ 0.008131] Initializing cgroup subsys devices
    Mar 12 10:25:59 myhost kernel: [ 0.008133] Initializing cgroup subsys freezer
    Mar 12 10:25:59 myhost kernel: [ 0.008136] Initializing cgroup subsys net_cls
    Mar 12 10:25:59 myhost kernel: [ 0.008138] Initializing cgroup subsys blkio
    Mar 12 10:25:59 myhost kernel: [ 0.008192] CPU: Physical Processor ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008194] CPU: Processor Core ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008197] mce: CPU supports 6 MCE banks
    Mar 12 10:25:59 myhost kernel: [ 0.008208] using AMD E400 aware idle routine
    Mar 12 10:25:59 myhost kernel: [ 0.009025] ACPI: Core revision 20110623
    Mar 12 10:25:59 myhost kernel: [ 0.011442] ftrace: allocating 17394 entries in 69 pages
    Mar 12 10:25:59 myhost kernel: [ 0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Mar 12 10:25:59 myhost kernel: [ 0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
    Mar 12 10:25:59 myhost kernel: [ 0.049997] Performance Events: AMD PMU driver.
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... version: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... bit width: 48
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... generic registers: 4
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... value mask: 0000ffffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... max period: 00007fffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... fixed-purpose events: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... event mask: 000000000000000f
    Mar 12 10:25:59 myhost kernel: [ 0.066733] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.093342] Booting Node 0, Processors #1
    Mar 12 10:25:59 myhost kernel: [ 0.190007] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.210005] #2
    Mar 12 10:25:59 myhost kernel: [ 0.306665] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.313317] Brought up 3 CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
    Mar 12 10:25:59 myhost kernel: [ 0.315139] devtmpfs: initialized
    Mar 12 10:25:59 myhost kernel: [ 0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.317603] print_constraints: dummy:
    Mar 12 10:25:59 myhost kernel: [ 0.317656] NET: Registered protocol family 16
    Mar 12 10:25:59 myhost kernel: [ 0.317767] TOM: 00000000c0000000 aka 3072M
    Mar 12 10:25:59 myhost kernel: [ 0.317784] TOM2: 0000000140000000 aka 5120M
    Mar 12 10:25:59 myhost kernel: [ 0.317805] Extended Config Space enabled on 1 nodes
    Mar 12 10:25:59 myhost kernel: [ 0.317819] ACPI: bus type pci registered
    Mar 12 10:25:59 myhost kernel: [ 0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.317896] PCI: not using MMCONFIG
    Mar 12 10:25:59 myhost kernel: [ 0.317898] PCI: Using configuration type 1 for base access
    Mar 12 10:25:59 myhost kernel: [ 0.317899] PCI: Using configuration type 1 for extended access
    Mar 12 10:25:59 myhost kernel: [ 0.318408] bio: create slab <bio-0> at 0
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Module Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Aggregator Device)
    Mar 12 10:25:59 myhost kernel: [ 0.321075] ACPI: Executed 1 blocks of module-level executable AML code
    Mar 12 10:25:59 myhost kernel: [ 0.322673] ACPI: Interpreter enabled
    Mar 12 10:25:59 myhost kernel: [ 0.322677] ACPI: (supports S0 S1 S4 S5)
    Mar 12 10:25:59 myhost kernel: [ 0.322695] ACPI: Using IOAPIC for interrupt routing
    Mar 12 10:25:59 myhost kernel: [ 0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 12 10:25:59 myhost kernel: [ 0.353905] ACPI: No dock devices found.
    Mar 12 10:25:59 myhost kernel: [ 0.353908] HEST: Table not found.
    Mar 12 10:25:59 myhost kernel: [ 0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 12 10:25:59 myhost kernel: [ 0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 12 10:25:59 myhost kernel: [ 0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Mar 12 10:25:59 myhost kernel: [ 0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    Mar 12 10:25:59 myhost kernel: [ 0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Mar 12 10:25:59 myhost kernel: [ 0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
    Mar 12 10:25:59 myhost kernel: [ 0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
    Mar 12 10:25:59 myhost kernel: [ 0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
    Mar 12 10:25:59 myhost kernel: [ 0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
    Mar 12 10:25:59 myhost kernel: [ 0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: loaded
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: bridge control possible 0000:02:00.0
    Mar 12 10:25:59 myhost kernel: [ 0.366818] PCI: Using ACPI for IRQ routing
    Mar 12 10:25:59 myhost kernel: [ 0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.374361] NetLabel: Initializing
    Mar 12 10:25:59 myhost kernel: [ 0.374363] NetLabel: domain hash size = 128
    Mar 12 10:25:59 myhost kernel: [ 0.374365] NetLabel: protocols = UNLABELED CIPSOv4
    Mar 12 10:25:59 myhost kernel: [ 0.374382] NetLabel: unlabeled traffic allowed by default
    Mar 12 10:25:59 myhost kernel: [ 0.381236] pnp: PnP ACPI init
    Mar 12 10:25:59 myhost kernel: [ 0.381259] ACPI: bus type pnp registered
    Mar 12 10:25:59 myhost kernel: [ 0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383953] pnp: PnP ACPI: found 14 devices
    Mar 12 10:25:59 myhost kernel: [ 0.383955] ACPI: ACPI bus type pnp unregistered
    Mar 12 10:25:59 myhost kernel: [ 0.390613] Switching to clocksource acpi_pm
    Mar 12 10:25:59 myhost kernel: [ 0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
    Mar 12 10:25:59 myhost kernel: [ 0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    Mar 12 10:25:59 myhost kernel: [ 0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    Mar 12 10:25:59 myhost kernel: [ 0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Mar 12 10:25:59 myhost kernel: [ 0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.390824] NET: Registered protocol family 2
    Mar 12 10:25:59 myhost kernel: [ 0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396352] TCP: Hash tables configured (established 524288 bind 65536)
    Mar 12 10:25:59 myhost kernel: [ 0.396355] TCP reno registered
    Mar 12 10:25:59 myhost kernel: [ 0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396554] NET: Registered protocol family 1
    Mar 12 10:25:59 myhost kernel: [ 0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460711] Unpacking initramfs...
    Mar 12 10:25:59 myhost kernel: [ 0.572196] Freeing initrd memory: 10584k freed
    Mar 12 10:25:59 myhost kernel: [ 0.577900] PCI-DMA: Disabling AGP.
    Mar 12 10:25:59 myhost kernel: [ 0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
    Mar 12 10:25:59 myhost kernel: [ 0.581547] PCI-DMA: using GART IOMMU.
    Mar 12 10:25:59 myhost kernel: [ 0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Mar 12 10:25:59 myhost kernel: [ 0.585462] IBS: LVT offset 1 assigned
    Mar 12 10:25:59 myhost kernel: [ 0.585486] perf: AMD IBS detected (0x00000007)
    Mar 12 10:25:59 myhost kernel: [ 0.585671] audit: initializing netlink socket (disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.585695] type=2000 audit(1331547952.583:1): initialized
    Mar 12 10:25:59 myhost kernel: [ 0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Mar 12 10:25:59 myhost kernel: [ 0.625385] VFS: Disk quotas dquot_6.5.2
    Mar 12 10:25:59 myhost kernel: [ 0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.625563] msgmni has been set to 7911
    Mar 12 10:25:59 myhost kernel: [ 0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Mar 12 10:25:59 myhost kernel: [ 0.625843] io scheduler noop registered
    Mar 12 10:25:59 myhost kernel: [ 0.625845] io scheduler deadline registered
    Mar 12 10:25:59 myhost kernel: [ 0.625880] io scheduler cfq registered (default)
    Mar 12 10:25:59 myhost kernel: [ 0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626710] ERST: Table is not found!
    Mar 12 10:25:59 myhost kernel: [ 0.626712] GHES: HEST is not enabled!
    Mar 12 10:25:59 myhost kernel: [ 0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Mar 12 10:25:59 myhost kernel: [ 0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.943516] Linux agpgart interface v0.103
    Mar 12 10:25:59 myhost kernel: [ 0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    Mar 12 10:25:59 myhost kernel: [ 0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
    Mar 12 10:25:59 myhost kernel: [ 0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
    Mar 12 10:25:59 myhost kernel: [ 0.946084] mousedev: PS/2 mouse device common for all mice
    Mar 12 10:25:59 myhost kernel: [ 0.946138] rtc_cmos 00:02: RTC can wake from S4
    Mar 12 10:25:59 myhost kernel: [ 0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Mar 12 10:25:59 myhost kernel: [ 0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
    Mar 12 10:25:59 myhost kernel: [ 0.946347] cpuidle: using governor ladder
    Mar 12 10:25:59 myhost kernel: [ 0.946350] cpuidle: using governor menu
    Mar 12 10:25:59 myhost kernel: [ 0.946589] TCP cubic registered
    Mar 12 10:25:59 myhost kernel: [ 0.946729] NET: Registered protocol family 10
    Mar 12 10:25:59 myhost kernel: [ 0.947209] NET: Registered protocol family 17
    Mar 12 10:25:59 myhost kernel: [ 0.947213] Registering the dns_resolver key type
    Mar 12 10:25:59 myhost kernel: [ 0.947383] registered taskstats version 1
    Mar 12 10:25:59 myhost kernel: [ 0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
    Mar 12 10:25:59 myhost kernel: [ 0.960226] Initializing network drop monitor service
    Mar 12 10:25:59 myhost kernel: [ 0.961665] Freeing unused kernel memory: 736k freed
    Mar 12 10:25:59 myhost kernel: [ 0.961941] Write protecting the kernel read-only data: 8192k
    Mar 12 10:25:59 myhost kernel: [ 0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Mar 12 10:25:59 myhost kernel: [ 0.968163] Freeing unused kernel memory: 1636k freed
    Mar 12 10:25:59 myhost kernel: [ 0.971309] Freeing unused kernel memory: 660k freed
    Mar 12 10:25:59 myhost [ 0.983845] udevd[66]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 1.019251] usbcore: registered new interface driver usbfs
    Mar 12 10:25:59 myhost kernel: [ 1.019287] usbcore: registered new interface driver hub
    Mar 12 10:25:59 myhost kernel: [ 1.019363] usbcore: registered new device driver usb
    Mar 12 10:25:59 myhost kernel: [ 1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.022334] SCSI subsystem initialized
    Mar 12 10:25:59 myhost kernel: [ 1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    Mar 12 10:25:59 myhost kernel: [ 1.024274] ehci_hcd 0000:00:02.1: debug port 1
    Mar 12 10:25:59 myhost kernel: [ 1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
    Mar 12 10:25:59 myhost kernel: [ 1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    Mar 12 10:25:59 myhost kernel: [ 1.033711] hub 1-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.033717] hub 1-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Mar 12 10:25:59 myhost kernel: [ 1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
    Mar 12 10:25:59 myhost kernel: [ 1.088876] hub 2-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.088885] hub 2-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.090175] scsi0 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.090309] scsi1 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
    Mar 12 10:25:59 myhost kernel: [ 1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
    Mar 12 10:25:59 myhost kernel: [ 1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.095105] scsi2 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095190] scsi3 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095843] scsi4 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095923] scsi5 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.417172] ata5: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Mar 12 10:25:59 myhost kernel: [ 1.573620] ata3.00: configured for UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
    Mar 12 10:25:59 myhost kernel: [ 1.586720] Switching to clocksource tsc
    Mar 12 10:25:59 myhost kernel: [ 2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.060169] ata4.00: configured for UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 2.390479] ata6: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Mar 12 10:25:59 myhost kernel: [ 2.397316] sd 2:0:0:0: [sda] Write Protect is off
    Mar 12 10:25:59 myhost kernel: [ 2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Mar 12 10:25:59 myhost kernel: [ 2.413212] sda: sda1 sda2 sda3 sda4
    Mar 12 10:25:59 myhost kernel: [ 2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
    Mar 12 10:25:59 myhost kernel: [ 2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Mar 12 10:25:59 myhost kernel: [ 2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
    Mar 12 10:25:59 myhost kernel: [ 2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    Mar 12 10:25:59 myhost kernel: [ 2.818556] EXT4-fs (sda3): write access will be enabled during recovery
    Mar 12 10:25:59 myhost kernel: [ 2.844947] EXT4-fs (sda3): recovery complete
    Mar 12 10:25:59 myhost kernel: [ 2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    Mar 12 10:25:59 myhost [ 4.125862] udevd[177]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
    Mar 12 10:25:59 myhost kernel: [ 5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Mar 12 10:26:01 myhost ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
    Mar 12 10:26:01 myhost ntpd[547]: proto: precision = 0.115 usec
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 3 lo ::1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: peers refreshed
    Mar 12 10:26:01 myhost ntpd[547]: Listening on routing socket on fd #20 for interface updates
    Mar 12 10:26:02 myhost kernel: [ 9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
    Mar 12 10:26:57 myhost dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMI present.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] RAMDISK: 37d6c000 - 37ff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 12:41:56 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 12:41:56 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 12:41:56 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 12

  • Active Protection now shows "disabled" upon boot up

    Recent change. Do not know what changed, but this always worked for me. Perhaps recent Wndows Updates?
    Active Protection comes up disabled after any boot or reboot. I recheck the option to Enable, but it is unchecked after each boot. Using XP Pro, T-61.
    Any ideas for the fix?
    ~Bob

    Hi,
    try to check following:
    - go to System Configuration Utility <Start->run-> type msconfig> and in the services and Startup  tabs, make sure, that the option for Active protection enabled <checked>: "TpShocks"
    - this same should be also in registry:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\TpShocks value: TpShocks.exe
    In case after you enable Active Protection and it's working fine, then this might be only a configuration issue, where perhaps and Antivir dissabled this applicaiton.
    Cheers

  • [solved] Only gibberish after boot on my netbook

    Hi all,
    I've installed Arch on my netbook (Acer Aspire ES1-11M-C56A) and everything went pretty smoothly until the first boot.
    Here is some images of my boot sequence in chronological order:
    https://www.dropbox.com/s/z2pgif6pr1327 … 8.jpg?dl=0
    https://www.dropbox.com/s/l7lo3f9qymgoa … 4.jpg?dl=0
    https://www.dropbox.com/s/eyk6ws374ytz0 … 5.jpg?dl=0
    https://www.dropbox.com/s/y5j93qjfts4zf … 1.jpg?dl=0
    The last one is the problematic one: It's only gibberish... When I press keys, I do see something happening, I just cant read anything...
    Two things I've already tried:
    Before I installed Arch onto the netbook, I ran Arch from my USB Stick and it worked fine.
    Secondly, since it ran finde from the stick, I checked the kernel boot line via dmesg | grep command after booting from the stick but it looks pretty much the same as the one in GRUB when booting from the netbook itself. It has the options rw and quite. I already tested inserting nomodeset in there, but that didn't help...
    Any help highly appriciated.... :-/
    Fabian
    Last edited by Dunkit (2015-05-01 10:01:34)

    Sorry, I already posted my last answer before I read your post...
    I do have an intel video chip ( it's onboard I suppose, lspci says 'VGA compatible Controller: Intel Corporation Atom PRocessor Z36xxx/Z37xxx Series Graphics & Display) and I installed the xf86-video-intel  for that.
    dmesg only shows some errors that seem to be related to the fact that I'm using eMMc storage:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000781aefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000781af000-0x00000000787aefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000787af000-0x00000000788aefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000788af000-0x00000000788eefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000788ef000-0x00000000794c5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Acer Aspire ES1-111M/R2, BIOS V1.03 07/22/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
    [ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
    [ 0.000000] [mem 0x79e00000-0x79ffffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x78000000-0x781aefff]
    [ 0.000000] [mem 0x78000000-0x781aefff] page 4k
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x788ef000-0x794c5fff]
    [ 0.000000] [mem 0x788ef000-0x789fffff] page 4k
    [ 0.000000] [mem 0x78a00000-0x793fffff] page 2M
    [ 0.000000] [mem 0x79400000-0x794c5fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x79dc6000-0x79dfffff]
    [ 0.000000] [mem 0x79dc6000-0x79dfffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1effffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
    [ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
    [ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
    [ 0.000000] [mem 0x20100000-0x201fffff] page 4k
    [ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379c2000-0x37cd8fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 0x00000000788EE120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
    [ 0.000000] ACPI: FACP 0x00000000788EB000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: DSDT 0x00000000788DD000 008EEF (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: FACS 0x0000000078878000 000040
    [ 0.000000] ACPI: UEFI 0x00000000788ED000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [ 0.000000] ACPI: MSDM 0x00000000788EC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [ 0.000000] ACPI: HPET 0x00000000788EA000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: LPIT 0x00000000788E9000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: APIC 0x00000000788E8000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: MCFG 0x00000000788E7000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788E6000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788DB000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788DA000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D9000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D8000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: UEFI 0x00000000788D7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D3000 00305B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
    [ 0.000000] ACPI: CSRT 0x00000000788D2000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D1000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
    [ 0.000000] ACPI: FPDT 0x00000000788D0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
    [ 0.000000] NODE_DATA [mem 0x79ff8000-0x79ffbfff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076000000-ffff880077ffffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1effffff]
    [ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20100000-0x781aefff]
    [ 0.000000] node 0: [mem 0x788ef000-0x794c5fff]
    [ 0.000000] node 0: [mem 0x79dc6000-0x79ffffff]
    [ 0.000000] On node 0 totalpages: 494941
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7744 pages used for memmap
    [ 0.000000] DMA32 zone: 490944 pages, LIFO batch:31
    [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
    [ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x781af000-0x787aefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x787af000-0x788aefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x788af000-0x788eefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x794c6000-0x79dc5fff]
    [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079200000 s86848 r8192 d23744 u524288
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 487112
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 1931524K/1979764K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 48240K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:1024 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
    [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
    [ 0.000000] TSC runs at 2163200 KHz
    [ 0.000000] lapic_timer_frequency = 277333
    [ 0.000000] tsc: Detected 2163.200 MHz processor
    [ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000061] ACPI: Core revision 20140724
    [ 0.020950] ACPI: All ACPI Tables successfully acquired
    [ 0.037502] Security Framework initialized
    [ 0.037510] Yama: becoming mindful.
    [ 0.037738] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.038621] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.039038] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.039048] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.039370] Initializing cgroup subsys memory
    [ 0.039383] Initializing cgroup subsys devices
    [ 0.039390] Initializing cgroup subsys freezer
    [ 0.039395] Initializing cgroup subsys net_cls
    [ 0.039400] Initializing cgroup subsys blkio
    [ 0.039426] CPU: Physical Processor ID: 0
    [ 0.039429] CPU: Processor Core ID: 0
    [ 0.039435] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.044212] mce: CPU supports 6 MCE banks
    [ 0.044222] CPU0: Thermal monitoring handled by SMI
    [ 0.044231] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
    [ 0.044350] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.045336] ftrace: allocating 20675 entries in 81 pages
    [ 0.056669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.089653] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
    [ 0.089679] TSC deadline timer enabled
    [ 0.089713] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
    [ 0.089728] ... version: 3
    [ 0.089730] ... bit width: 40
    [ 0.089732] ... generic registers: 2
    [ 0.089734] ... value mask: 000000ffffffffff
    [ 0.089737] ... max period: 000000ffffffffff
    [ 0.089738] ... fixed-purpose events: 3
    [ 0.089740] ... event mask: 0000000700000003
    [ 0.109818] x86: Booting SMP configuration:
    [ 0.109824] .... node #0, CPUs: #1
    [ 0.125602] CPU1: Thermal monitoring handled by SMI
    [ 0.127775] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.127798] x86: Booted up 1 node, 2 CPUs
    [ 0.127802] smpboot: Total of 2 processors activated (8656.33 BogoMIPS)
    [ 0.128380] devtmpfs: initialized
    [ 0.134353] PM: Registering ACPI NVS region [mem 0x787af000-0x788aefff] (1048576 bytes)
    [ 0.134382] PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes)
    [ 0.136401] pinctrl core: initialized pinctrl subsystem
    [ 0.136470] RTC time: 20:38:52, date: 11/14/14
    [ 0.136681] NET: Registered protocol family 16
    [ 0.136908] cpuidle: using governor ladder
    [ 0.136913] cpuidle: using governor menu
    [ 0.136962] ACPI: bus type PCI registered
    [ 0.136966] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.137094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.137099] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.137280] PCI: Using configuration type 1 for base access
    [ 0.148365] ACPI: Added _OSI(Module Device)
    [ 0.148371] ACPI: Added _OSI(Processor Device)
    [ 0.148373] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.148376] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.182017] ACPI: Dynamic OEM Table Load:
    [ 0.182033] ACPI: SSDT 0xFFFF88007566F000 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
    [ 0.182998] ACPI: Dynamic OEM Table Load:
    [ 0.183012] ACPI: SSDT 0xFFFF88007566F800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.191456] ACPI: Dynamic OEM Table Load:
    [ 0.191469] ACPI: SSDT 0xFFFF88007523E600 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.201158] ACPI: Dynamic OEM Table Load:
    [ 0.201171] ACPI: SSDT 0xFFFF880075065D80 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.221110] ACPI: Interpreter enabled
    [ 0.221122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.221131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.221159] ACPI: (supports S0 S3 S4 S5)
    [ 0.221162] ACPI: Using IOAPIC for interrupt routing
    [ 0.221223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.224878] ACPI: Power Resource [USBC] (on)
    [ 0.235979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.235991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.236183] \_SB_.PCI0:_OSC invalid UUID
    [ 0.236186] _OSC request data:1 1f 0
    [ 0.236194] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.236642] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.236942] PCI host bridge to bus 0000:00
    [ 0.236949] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.236953] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
    [ 0.236957] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
    [ 0.236960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.236964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.236968] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.236971] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
    [ 0.236975] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
    [ 0.236987] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
    [ 0.237145] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
    [ 0.237161] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
    [ 0.237174] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
    [ 0.237185] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
    [ 0.237352] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
    [ 0.237372] pci 0000:00:12.0: reg 0x10: [mem 0x90920000-0x90920fff]
    [ 0.237384] pci 0000:00:12.0: reg 0x14: [mem 0x9091f000-0x9091ffff]
    [ 0.237451] pci 0000:00:12.0: PME# supported from D0 D3hot
    [ 0.237582] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
    [ 0.237604] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
    [ 0.237664] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.237767] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.237842] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
    [ 0.237862] pci 0000:00:17.0: reg 0x10: [mem 0x9091d000-0x9091dfff]
    [ 0.237874] pci 0000:00:17.0: reg 0x14: [mem 0x9091c000-0x9091cfff]
    [ 0.237941] pci 0000:00:17.0: PME# supported from D0 D3hot
    [ 0.238080] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
    [ 0.238109] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
    [ 0.238125] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
    [ 0.238234] pci 0000:00:1a.0: PME# supported from D0 D3hot
    [ 0.238369] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
    [ 0.238395] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
    [ 0.238467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.238595] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
    [ 0.238661] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.238730] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.238805] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
    [ 0.238869] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.238938] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.239009] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
    [ 0.239073] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.239142] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.239220] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
    [ 0.239413] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
    [ 0.239450] pci 0000:00:1f.3: reg 0x10: [mem 0x90918000-0x9091801f]
    [ 0.239523] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
    [ 0.239806] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.239939] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
    [ 0.239969] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
    [ 0.240106] pci 0000:02:00.0: supports D1 D2
    [ 0.240109] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.240155] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.244425] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.244433] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
    [ 0.244537] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.244559] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
    [ 0.244589] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
    [ 0.244609] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
    [ 0.244701] pci 0000:03:00.0: supports D1 D2
    [ 0.244704] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.244753] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.251067] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.251073] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.251079] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
    [ 0.251085] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.251926] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.252051] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252630] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.255427] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.255679] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.255890] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.255894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.255900] vgaarb: loaded
    [ 0.255902] vgaarb: bridge control possible 0000:00:02.0
    [ 0.255981] PCI: Using ACPI for IRQ routing
    [ 0.257377] PCI: pci_cache_line_size set to 64 bytes
    [ 0.257448] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    [ 0.257451] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
    [ 0.257454] e820: reserve RAM buffer [mem 0x781af000-0x7bffffff]
    [ 0.257457] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff]
    [ 0.257460] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
    [ 0.257646] NetLabel: Initializing
    [ 0.257649] NetLabel: domain hash size = 128
    [ 0.257651] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.257674] NetLabel: unlabeled traffic allowed by default
    [ 0.257740] Switched to clocksource refined-jiffies
    [ 0.266257] pnp: PnP ACPI init
    [ 0.266368] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.266512] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.266518] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.266522] system 00:01: [io 0x0500-0x05fe] has been reserved
    [ 0.266526] system 00:01: [io 0x0600-0x061f] has been reserved
    [ 0.266531] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.266537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.266663] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.267177] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
    [ 0.267183] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
    [ 0.267187] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
    [ 0.267191] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
    [ 0.267196] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
    [ 0.267200] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.267204] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
    [ 0.267208] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.267213] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
    [ 0.267218] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268674] pnp: PnP ACPI: found 4 devices
    [ 0.277065] Switched to clocksource acpi_pm
    [ 0.277091] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.277097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.277102] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.277111] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.277116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.277135] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.277139] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.277144] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.277148] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.277151] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.277162] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
    [ 0.277166] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
    [ 0.277176] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277180] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277189] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277193] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277200] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.277205] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.277217] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277221] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277227] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
    [ 0.277231] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
    [ 0.277240] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277244] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277248] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.277252] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.277264] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.277268] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.277274] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
    [ 0.277283] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.277287] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.277293] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
    [ 0.277298] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.277306] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
    [ 0.277309] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
    [ 0.277313] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
    [ 0.277316] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
    [ 0.277320] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
    [ 0.277323] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
    [ 0.277327] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
    [ 0.277331] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.277335] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.277338] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
    [ 0.277342] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.277345] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
    [ 0.277349] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.277394] NET: Registered protocol family 2
    [ 0.277708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.277807] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.277882] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.277930] TCP: reno registered
    [ 0.277940] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.277962] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.278050] NET: Registered protocol family 1
    [ 0.278077] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.278420] PCI: CLS 64 bytes, default 64
    [ 0.278507] Unpacking initramfs...
    [ 0.363030] Freeing initrd memory: 3164K (ffff8800379c2000 - ffff880037cd9000)
    [ 0.363325] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x824
    [ 0.363342] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x824
    [ 0.363454] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.363501] Scanning for low memory corruption every 60 seconds
    [ 0.364076] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.364106] Initialise system trusted keyring
    [ 0.364623] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.367286] zpool: loaded
    [ 0.367291] zbud: loaded
    [ 0.367570] VFS: Disk quotas dquot_6.5.2
    [ 0.367637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.367884] msgmni has been set to 3778
    [ 0.367982] Key type big_key registered
    [ 0.368394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.368491] io scheduler noop registered
    [ 0.368496] io scheduler deadline registered
    [ 0.368553] io scheduler cfq registered (default)
    [ 0.369157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.369189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.369267] efifb: probing for efifb
    [ 0.369275] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
    [ 0.369278] efifb: mode is 640x480x1, linelength=80, pages=1
    [ 0.369280] efifb: scrolling: redraw
    [ 0.369283] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.371834] Console: switching to colour frame buffer device 80x30
    [ 0.374216] fb0: EFI VGA frame buffer device
    [ 0.374232] intel_idle: MWAIT substates: 0x33000020
    [ 0.374235] intel_idle: v0.4 model 0x37
    [ 0.374238] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.374460] GHES: HEST is not enabled!
    [ 0.374613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.395990] hpet: number irqs doesn't agree with number of timers
    [ 0.396024] Linux agpgart interface v0.103
    [ 0.396109] rtc_cmos 00:00: RTC can wake from S4
    [ 0.396382] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
    [ 0.396413] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
    [ 0.396432] Intel P-state driver initializing.
    [ 0.396709] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.397338] TCP: cubic registered
    [ 0.398118] NET: Registered protocol family 10
    [ 0.399444] NET: Registered protocol family 17
    [ 0.401489] Loading compiled-in X.509 certificates
    [ 0.401523] registered taskstats version 1
    [ 0.402998] Magic number: 6:785:649
    [ 0.403061] acpi LNXCPU:02: hash matches
    [ 0.403367] rtc_cmos 00:00: setting system clock to 2014-11-14 20:38:52 UTC (1415997532)
    [ 0.404025] PM: Hibernation image not present or could not be loaded.
    [ 0.407661] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.407671] Write protecting the kernel read-only data: 8192k
    [ 0.415930] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.419109] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.434439] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.464489] sdhci: Secure Digital Host Controller Interface driver
    [ 0.464494] sdhci: Copyright(c) Pierre Ossman
    [ 0.471477] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.471481] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.471995] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.480290] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev e)
    [ 0.481461] sdhci-pci 0000:00:12.0: No vmmc regulator found
    [ 0.481466] sdhci-pci 0000:00:12.0: No vqmmc regulator found
    [ 0.483289] ACPI: bus type USB registered
    [ 0.483335] usbcore: registered new interface driver usbfs
    [ 0.483355] usbcore: registered new interface driver hub
    [ 0.483418] usbcore: registered new device driver usb
    [ 0.485860] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
    [ 0.485891] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev e)
    [ 0.487077] sdhci-pci 0000:00:17.0: No vmmc regulator found
    [ 0.487080] sdhci-pci 0000:00:17.0: No vqmmc regulator found
    [ 0.488267] mmc1: SDHCI controller on PCI [0000:00:17.0] using ADMA
    [ 0.500911] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.500924] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.501319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.501349] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
    [ 0.501680] hub 1-0:1.0: USB hub found
    [ 0.501699] hub 1-0:1.0: 6 ports detected
    [ 0.502403] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.502411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.502682] hub 2-0:1.0: USB hub found
    [ 0.502697] hub 2-0:1.0: 1 port detected
    [ 0.536044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.682960] mmc1: BKOPS_EN bit is not set
    [ 0.753714] mmc1: new HS200 MMC card at address 0001
    [ 0.757972] mmcblk0: mmc1:0001 HBG4e 29.1 GiB
    [ 0.758296] mmcblk0boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
    [ 0.758656] mmcblk0boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
    [ 0.759001] mmcblk0rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB
    [ 0.760381] mmcblk0: p1
    [ 0.769458] mmcblk0boot1: unknown partition table
    [ 0.776772] mmcblk0boot0: unknown partition table
    [ 0.861284] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 1.039303] hub 1-2:1.0: USB hub found
    [ 1.039605] hub 1-2:1.0: 4 ports detected
    [ 1.040760] usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
    [ 1.040784] usb 1-2-port1: failed to peer to usb2-port1 (-16)
    [ 1.040793] usb: port power management may be unreliable
    [ 1.041303] usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
    [ 1.041322] usb 1-2-port2: failed to peer to usb2-port1 (-16)
    [ 1.041742] usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
    [ 1.041761] usb 1-2-port3: failed to peer to usb2-port1 (-16)
    [ 1.042168] usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
    [ 1.042186] usb 1-2-port4: failed to peer to usb2-port1 (-16)
    [ 1.204964] usb 1-4: new high-speed USB device number 3 using xhci_hcd
    [ 1.365057] tsc: Refined TSC clocksource calibration: 2166.666 MHz
    [ 1.458942] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
    [ 2.365981] Switched to clocksource tsc
    [ 9.024844] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 9.027472] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 9.028069] mmcblk0rpmb: retrying using single block read
    [ 9.030203] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.032796] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.035371] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.037958] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.040486] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.043040] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.043462] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 9.043805] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 17.277306] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 17.279940] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 17.293029] mmcblk0rpmb: retrying using single block read
    [ 17.295226] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.323127] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.351243] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.379502] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.407857] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.436111] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.462187] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 17.475265] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 17.568142] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
    [ 17.922112] random: nonblocking pool is initialized
    [ 45.820995] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted
    [ 45.821014] EXT4-fs (mmcblk0p1): recovery complete
    [ 45.839454] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
    [ 46.315355] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 46.454989] systemd-journald[128]: File /var/log/journal/c1ea0510636b4ead93870d2114f006f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 46.469206] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
    [ 46.543132] systemd-journald[128]: Received request to flush runtime journal from PID 1
    [ 46.757953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 46.759247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    [ 46.759257] ACPI: Power Button [PWRB]
    [ 46.759346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
    [ 46.759350] ACPI: Sleep Button [SLPB]
    [ 46.759441] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 46.759490] ACPI: Lid Switch [LID]
    [ 46.759576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 46.759580] ACPI: Power Button [PWRF]
    [ 46.785055] mei_txe 0000:00:1a.0: irq 88 for MSI/MSI-X
    [ 46.832919] ACPI: AC Adapter [ACAD] (on-line)
    [ 46.845651] wmi: Mapper loaded
    [ 46.852089] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
    [ 46.878734] snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
    [ 46.879800] hidraw: raw HID events driver (C) Jiri Kosina
    [ 46.879829] [drm] Initialized drm 1.1.0 20060810
    [ 46.888955] ACPI: Battery Slot [BAT1] (battery present)
    [ 46.910854] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [ 46.910865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 46.914888] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
    [ 46.914912] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
    [ 46.914930] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
    [ 46.915040] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
    [ 46.915081] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
    [ 46.921669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 46.921694] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 46.929220] r8169 0000:03:00.0: irq 90 for MSI/MSI-X
    [ 46.929504] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000356000, c4:54:44:c3:00:9c, XID 0c000800 IRQ 90
    [ 46.929508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 46.929921] thermal LNXTHERM:00: registered as thermal_zone1
    [ 46.929925] ACPI: Thermal Zone [TZ01] (42 C)
    [ 46.937929] bcma: bus0: Bus registered
    [ 46.944450] [drm] Memory usable by graphics device = 2048M
    [ 46.944457] [drm] Replacing VGA console driver
    [ 46.944463] checking generic (a0000 10000) vs hw (80000000 10000000)
    [ 46.944465] fb: switching to inteldrmfb from EFI VGA
    [ 46.944514] Console: switching to colour dummy device 80x25
    [ 46.946311] i915 0000:00:02.0: irq 91 for MSI/MSI-X
    [ 46.946327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 46.946330] [drm] Driver supports precise vblank timestamp query.
    [ 47.025611] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 47.066033] [drm] VBT doesn't support DRRS
    [ 47.195396] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    [ 47.211039] fbcon: inteldrmfb (fb0) is primary device
    [ 48.893803] Console: switching to colour frame buffer device 170x48
    [ 48.922732] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 48.922746] i915 0000:00:02.0: registered panic notifier
    [ 48.968459] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 48.968951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 48.969149] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 55.143879] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 55.146515] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 55.146934] mmcblk0rpmb: retrying using single block read
    [ 55.149180] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.151614] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.154086] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.156560] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.159039] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.161459] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.161802] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 55.162057] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 63.388980] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 63.391496] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 63.391966] mmcblk0rpmb: retrying using single block read
    [ 63.394102] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.396574] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.399050] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.401468] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.403913] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.406388] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.406700] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 63.406951] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 63.423775] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 63.529519] media: Linux media interface: v0.10
    [ 63.580182] Linux video capture interface: v2.00
    [ 63.608499] Bluetooth: Core ver 2.19
    [ 63.608788] NET: Registered protocol family 31
    [ 63.608794] Bluetooth: HCI device and connection manager initialized
    [ 63.608807] Bluetooth: HCI socket layer initialized
    [ 63.608815] Bluetooth: L2CAP socket layer initialized
    [ 63.608833] Bluetooth: SCO socket layer initialized
    [ 63.642483] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
    [ 63.650153] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
    [ 63.650314] usbcore: registered new interface driver uvcvideo
    [ 63.650318] USB Video Class driver (1.1.1)
    [ 63.665373] intel_rapl: Found RAPL domain package
    [ 63.665379] intel_rapl: Found RAPL domain core
    [ 63.688550] iTCO_vendor_support: vendor-support=0
    [ 63.701582] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 63.701652] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
    [ 63.701827] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 63.739578] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 63.739584] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 63.739588] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 63.739590] sound hdaudioC0D0: mono: mono_out=0x0
    [ 63.739593] sound hdaudioC0D0: inputs:
    [ 63.739596] sound hdaudioC0D0: Mic=0x12
    [ 63.807591] usbcore: registered new interface driver btusb
    [ 63.809964] r8169 0000:03:00.0 enp3s0: renamed from eth0
    [ 63.859693] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 63.859712] acer_wmi: Function bitmap for Communication Button: 0x801
    [ 63.859861] acer_wmi: Brightness must be controlled by acpi video driver
    [ 63.871050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 63.873001] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 63.875263] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
    [ 63.875363] input: Acer WMI hotkeys as /devices/virtual/input/input10
    [ 63.879763] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
    [ 63.896357] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.904021] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.904883] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.905761] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.906614] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.906794] input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input12
    [ 63.907001] hid-multitouch 0018:06CB:2991.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
    [ 63.967191] mousedev: PS/2 mouse device common for all mice
    [ 64.026205] cfg80211: Calling CRDA to update world regulatory domain
    [ 64.458411] r8169 0000:03:00.0 enp3s0: link down
    [ 64.458485] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 64.458497] r8169 0000:03:00.0 enp3s0: link down
    [ 65.817131] Bluetooth: hci0 command 0x1003 tx timeout
    [ 66.041823] r8169 0000:03:00.0 enp3s0: link up
    [ 66.041860] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    journalctl -xn gives:
    -- Logs begin at Fr 2014-11-14 20:35:40 CET, end at Fr 2014-11-14 21:40:11 CET. --
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Timers.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Sockets.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Sockets.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Basic System.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Basic System.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Default.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Default.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Startup finished in 29ms.
    -- Subject: System start-up is now complete
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- All system services necessary queued for starting at boot have been
    -- successfully started. Note that this does not mean that the machine is
    -- now idle as services might still be busy with completing start-up.
    -- Kernel start-up required KERNEL_USEC microseconds.
    -- Initial RAM disk start-up required INITRD_USEC microseconds.
    -- Userspace start-up required 29200 microseconds.
    Nov 14 21:40:08 weierstrass login[179]: ROOT LOGIN ON tty1
    Nov 14 21:40:11 weierstrass dhcpcd[301]: enp3s0: no IPv6 Routers available
    ... which looks pretty fine to me...
    No, no other issues so far.
    How could I find out if some autologin is set up?

  • MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

         Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
          After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
         After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
         The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
         At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
         Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • Cannot Print to any Printer / Cannot Preview Print (Printing from Classic Reader Works)

    I'm having the same problem noted here: https://support.mozilla.org/en-US/questions/989426?esab=a&as=aaq I will check if reinstalling printers helps - note that I'm trying to print to a virtual pdf printer. However, as the title suggests, I have been

  • Why you should never buy HP laptops

    Twice in less than two months I've been screwed by HP. First, the thousand+ dollar tx2000 tablet I bought for school stopped working 18-20 months after I bought it - 8-10 months out of its warranty. Mind you, never was it upgraded with other hardware

  • How do I create a white line border for my video

    So I've got standard HD source video with 16:9 aspect ratio (1920 x 1080 pixels) and I've made it "wide screen" by putting black slugs as bands at the top and bottom of the screen. I would now like to place a white line border at the top and bottom o

  • Problem using target disc mode

    I have 2 iMacs. One is a 2.1 GHz G5 running OS 10.5.8 and the other is a 2 GHz Intel core duo OS - unknown (but at least 10.4.x and most probably 10.5.x). I want to use the G5 as the TDM host and Intel as the target. The Intel iMac appears to go into

  • How to print inserts for suspension files on HP2540

    I am trying to print label inserts for suspension files but cant find anything similar in "paper size"  to set printing to. Does this machine not have a set up for this size ??