LabView Control System Engineer Job Opening - Seattle
LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an
opening for Software Controls Engineer. Seattle Safety designs,
manufactures, and installs advanced crash test sled systems that are
used in automotive and aeronautical industries. The duties of the
Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad
in subject matters concerning performance, installation, and
maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Beginner-to-intermediate knowledge of LabVIEW.
Passing understanding of binary logic.
Familiarity with at least one low-level programming language (Assembly, C, COBOL, etc)
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software
maintenance and version management. Experience with source
configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis,
systems analysis, digital filtering, and both linear and non-linear
signal processing.
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
John Covey
(253)395-4321
822 3rd Ave S
Kent, WA 98032
[email protected]
Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM
Similar Messages
-
High-Level LabView Control System Engineer Job Opening - Seattle
High-Level LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Senior Software Controls Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis, systems analysis, digital filtering, and both linear and non-linear signal processing.
BSEE, BSME or BS Physics may be a good fit, but not limited to these areas.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
Tom Wittmann
(253)395-4321
1222 6th Av N
Kent, WA 98032
[email protected]
Attachments:
ServoSled Brochure.pdf 1215 KBDear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM -
LabView Software Programmer Job Opening - Seattle
LabView Software Programmer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Software Programmer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Software Programmer include:
Work with current team members with varying levels of LabView to restructure existing crash test software and to do so in such a manner as to ensure each are able understand and work with code.
Supports all aspects of software application design, development, testing, deployment, and support.
Analyze the current and future needs of the software in order to properly select the type of architecture and structure best suited for the new application.
Perform software testing at a unit and integration level to ensure expected behavior.
Comments code clearly and consistently throughout the development process.
Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
Troubleshoot and repair any functional software bugs that may arise.
Investigate opportunities for system improvement through new software approaches.
Furthermore, the ideal candidate would possess the following skills:
Expert knowledge of LabVIEW.
Passing understanding of industrial controls.
Familiarity with a minimum one low-level programming language (C, C#, VB, Ladder, etc)
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated feedback control systems.
Experience with LabVIEW RTOS and PC Real Time Computers
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Porsche ServoSled facility near Stutgart GermanyJob is open again, see updated description here.
Please note at this time we are NOT accepting applications from outside the US. -
Control Systems Engineer
Seattle Safety – Kent, WA 98032
Seattle Safety is looking for a qualified individual to fill an opening for Control Systems Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Control Systems Engineer include:
• Experience designing, testing, and optimizing industrial automation and control systems utilizing modern and classic control methodologies such as PID. Experience with neural networks.
• Strong background in mathematics, physics, and signal analysis.
• Electrical / Electronic design experience including automation.
• Design, troubleshoot, and test software written in LabVIEW 8.6 & 2012 and C.
• Help customers diagnosing electrical, software, and mechanical problems with their systems. This will sometimes involve working odd hours for customers on the other side of the planet.
• Support installations of crash test equipment at on-site locations worldwide.
• Provide round the clock technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
• Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
• Work with current team members to restructure existing crash test software.
• Supports all aspects of software application design, development, testing, deployment, and support.
• Perform software testing at a unit and integration level to ensure expected behavior.
• Comment code clearly and consistently throughout the development process.
• Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
• Candidates must be located in the US, the northwest would be ideal.
Furthermore, the ideal candidate would possess the following skills:
• Advanced or expert knowledge of LabVIEW.
• Advanced or expert knowledge of C.
• Expert knowledge of industrial controls.
• Familiarity with a minimum one low-level programming language (C#, VB, Ladder, etc)
• Familiarity with data acquisition concepts and hardware.
• Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
• Experience with sophisticated feedback control systems.
• BSEE, BS Physics, and BSME are preferred but not required depending on experience.
• Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.Dear Sir/Mam,
I’m particularly interested in the position of Control System Engineer, which relates strongly to my more than six years of experience in designing various applications for testing and automation. I am Certified LabVIEW Associate Developer & prepared for CLD also. Currently I am leading a team for the project for Machine Automation and remote diagnostics, and I believe I meet all the essential criteria of the position. My work at my current organization has been rewarding and productive. However, I wish to expand my career further, into the application designing and development role. The position also has a definite correlation with my practical knowledge and experience. You’ll see from my CV that I have been deeply involved in designing and development of various applications based on Programming techniques, hardware and network designing. I feel that I am well qualified to make an effective and useful contribution to design good application which will be market acceptable.
I’m enthusiastic about the chance to participate in a meaningful role with an industry leader in the field.
Thank you for your consideration of my application. Please contact me should you require any further information,
Yours sincerely,
Mohit Monga
Mohit Monga
Attachments:
Mohit Monga_CV.doc 159 KB -
We're looking for someone with experience in designing, developing and building automated test systems. 3 years LabVIEW experience is required. Please email resume to [email protected] Questions can be forwarded to the same email.
Must be able to work at our office in Greater Toronto Area (Canada).
Thank You
Michael Aivaliotis
Michael Aivaliotis
VI Shots LLCDear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM -
Full time Labview Computer Systems Engineer – London, UK
BPP-TECH are seeking engineers to carry out the development and testing of software for instrumentation packages used in the international offshore oil and gas industry. The software uses National Instrument’s Labview as a base and it is the intent to maintain this whilst re-writing the software in a C++ environment.
The requirements of the role are:
Experience developing SCADA, HMI and instrumentation systems in Labview.
Experience in multiplatform Labview development (Windows and Real-time) and development of multithreaded applications.
Developing Labview applications that utilise MySQL or other databases, interfacing with software libraries in C++
Writing technical documentations, user manuals, and system specifications, for software projects
Understanding of networking and communication protocols (serial, TCP/IP, Modbus, etc.).
A permanent post with competitive salary package including a pension scheme will be offered to successful applicants. BPP-TECH will consider sponsorship towards a UK work permit for those candidates that may require this.
How to apply:
To apply for this position please visit:
http://www.bpp-tech.com/careers/computer-systems-engineer
(Please do not reply to this post)Aw MAN, and here I was hoping to move back to SLC...
(Ryan! Great to "see" you. Hope things are going well for you over there.) -
Graphic Designer / User-Interface Engineer Job Opening
Title:
Graphic Designer/User-Interface Engineer
Job Qualifications:
- Must be an innovative Graphic Designer/User-Interface
Engineer
- Minimum 4 years experience developing web-based user
interfaces
- Expert knowledge of Adobe graphic design applications such
as Flash, Photoshop, and Illustrator or alike products
- Experience with Adobe Flex and ActionScript3
- Has a proven track record designing and documenting
high-quality user interface designs for web-based applications
- Possesses a strong visual design sense and general design
principles
- Has some background in object-oriented design and
programming
- Able to work effectively from a remote home office
- Has excellent interpersonal and communication skills and
collaborates well in person, online, or on the phone
Job Description:
This position offers an opportunity to work on high-end
graphical design projects building rich Internet applications for
Fortune 500 client companies in industries like financial services,
software and consumer products. As a User-Interface Engineer, you
will be expected to:
• contribute strong leadership through all phases of
development including functional requirements development, UI
design and documentation
• analyze and establish functional requirements and
specifications using feedback from clients and other developers
• apply your visual creativity and functional
experience to design elegant and responsive web user interfaces
with Adobe Flash (Flex expertise desired)
• support other developers to ensure successful
implementation of the designs
• create appropriate documentation during development
Candidates will be expected to provide a portfolio of their
graphical design work in zip files or URL links for review.
- Can be based anywhere in the U.S.
- Up to 25 percent travel time required
- Work on-site and from home
- 3 to 6 month engagement with potential for perm placement
If you are looking for a new exciting opportunity, please
reply with your resume attached to [email protected]. Thank
you for your interest and I look forward to hearing from you soon.
Regards,
Kevin BakhmutskyKevin,
Are you only looking for a Graphic Designer or do you have
other openings that could be filled by a Flex person with a J2EE
background? -
Controls System Engineer-Labview and Teststand
One year experience in Labview and Teststand/automated testing system for Locomotives.Masters in Embedded Software. Seeking Employment Fulltime/Contract.
Hi,
Thank you for responding. I am based at USA. Currently looking for opportunities here.
Thanks!
Priya -
Senior LabVIEW Controls Engineer--GOLDEN, CO
JOB DESCRIPTION
Vehicle Projects Inc is seeking a full-time, senior controls engineer for the development and demonstration of high-power hydrogen-fuelcell rail vehicles. For background on our rail-vehicle program, please google the keywords: (“fuel cell locomotive” “vehicle projects”). Responsibilities of the position include:
Overall fuelcell powerplant control system design, including integration with the vehicle control system
Computer modeling and simulation of hybrid powerplant operation
Design and development of complex LabVIEW control system applications
Preparation of electrical drawings, specifications, and test plans
Participation in laboratory and field testing of subsystems and vehicles
Data analyses
Part-sourcing and ordering of hardware
Support of hardware-build activities
Occasional technical support to other staff members’ projects, including research
Travel to build-facilities, test sites, and demonstration sites (based on the past 12 months as a sample, this position requires 17 % of work-days on travel)
QUALIFICATIONS
The successful candidate must demonstrate the following qualifications:
Self-motivation and ability to learn quickly
Self-confidence to thrive in the high-risk, high-reward R&D environment
8-10 years of experience with LabVIEW, including 4 years each with Realtime and FPGA Modules
Experience with the National Instruments cRIO platform
Experience with CAN communications
Familiarity with Ethernet networking
Ability to work closely with skilled trades people and understand the practical side of system design
Excellent communication skills, including the ability to interface with multiple international design teams
Excellent hands-on and troubleshooting skills
MS degree in Electrical Engineering, Computer Science, or Controls Engineering is preferred
Interest in scientific disciplines and having a scientific mindset are a plus
While the ability to learn fuelcell and hydrogen technology is essential, in-depth knowledge of fuel cells and hydrogen is not a prerequisite for the appointment.
COMPANY
Vehicle Projects Inc (since 1998), based in Denver/Golden, Colorado, serves the transportation industry by developing and demonstrating prototype hydrogen-fuelcell vehicles that address worldwide societal problems such as energy efficiency, energy security, and global climate change. Once a fuelcell prototype vehicle is built and tested, we provide it to industry for demonstration under working conditions.
The company has two independent associated nonprofit research organizations: Fuelcell Propulsion Institute (since 1996) and Supersonic Institute. The Fuelcell Propulsion Institute laid the foundations for the current development of railway locomotives. Supersonic Institute conducts research and educates the public on supersonic vehicles fueled by hydrogen.
Industrial clients and co-funders of our projects have included Placer Dome Mining Company, Newmont Mining Corporation, Caterpillar, Mitsui & Co (Japan), and BNSF Railway Co. Government funders have included the US Department of Energy, US Department of Defense, National Institute of Occupational Safety and Health (NIOSH), Government of Canada, and Government of Japan.
Our state-of-the-art facility, constructed in 2007, is part of the burgeoning west-Denver (Golden) corridor of renewable-energy companies, including the nearby National Renewable Energy Laboratory (NREL). Metro Denver (www.metrodenver.org), with a population of three million, is a well-managed city located at the base of the Rocky Mountains. With an average annual temperature of 50 F, low humidity, and 300 days of sun, its moderate climate is one of many attractive features of the city. Its citizens are in the top national percentiles for fitness, health, and formal education.
We believe our company’s most important asset is its people. New employees are selected with care, and successful employees are nurtured and encouraged to remain with the company through empowerment, highly competitive compensation, a generous benefits package, job-related training, profit-sharing, and a pleasant work environment.
COMPENSATION
A person of the caliber we are seeking will receive an above-average salary, employment contract, and a generous benefits package, including profit sharing.
APPLICATION
Apply by 4 April 2011 by sending an email-attached MS-Word letter of application, resume, salary history, and the names and contact information of three references. A portfolio in support of the application is desirable. The letter of application, addressed personally to the president of the company and using proper style for a business letter, should specifically address your qualifications and experience to undertake the stated responsibilities. Only applicants who write such a letter will be considered. The selection process includes more than one interview, a LabVIEW proficiency test, and a writing-skills evaluation. Please send application materials to [email protected].I am a control systems engineer with 16 years of experience designing and building large systems using LabVIEW in Albuquerque NM and working currently for TEAM Technologies Inc. almost 15 years.
I hold a Master Degree in Space Power Systems graduated from Moscow Aerospace University.
I invented and implemented a message-driven and scripting controlled LabVIEW architecture which I presented couple times at NIWeeks, published in LTR, and local NI and ALVIN seminars. This architecture I was successfully used to develop projects for SNL (National Lab), WSTF (NASA), EMCORE, and etc. firms and organizations.
My expertise areas are: 1) Mechanical Engineering; 2) High Temperature Energy Converters; 3) Thermodynamics 4) Digital and Analog Electronics; 5) Programming: LabVIEW, C, embedded microprocessors (ARM, Cortex); Distributed hard real-time control with PXI and Compact RIO instrumentation.
I have published 45 scientific papers and have six patents.
I am NOT a certified NI LabVIEW programmer, because I believe that scientists and engineers has to have Degree Diploma only.
LabVIEW is just a programming tool nothing more.
Regards,
Youri Djachiachvili
Aerospace Engineer.
email: [email protected] -
I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
If you would like to meet during NIWeek and/or request my resume please email me at [email protected]I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
I am a consultant and I am currently available for contract work.
I have done the things you describe as experience you would like to have.
I have attached a "Fact Sheet" which describes some of the systems I have built.
You will notice that I am experienced with developing hardware systems and controls as well as software systems..
I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
If you are interested in discussing this further please call or email me.
Tom Moser
ForMost Systems
North Canton Ohio
330-470-0404 begin_of_the_skype_highlighting 330-470-0404 end_of_the_skype_highlighting x202
email: [email protected]
Attachments:
IS 071410a .pdf 253 KB -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK
2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0 Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0 Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦ Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦ Delivering professional and high quality, customer education courses.
◦ Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦ Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Travel 50% of the time.
3.0 Qualifications & Requirements:
◦ Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦ Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦ Understanding of object oriented principles.
◦ Ability to pass CLA exam within the year.
◦ Knowledge and experience in instrumentation & control, and industrial automation is required.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦ Excellent written, oral and presentation skills are key.
◦ Ability to deal effectively with customers to make them successful is essential.
◦ Ability to get along with others and function as a team player as well as work effectively alone.
◦ A proactive/can do attitude is vital and a happy view on life.
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license.
4.0 Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0 Reporting:
Systems Engineers will report to the Technical Director.
6.0 Salary:
Competitive salary based on level of experience.
7.0 Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx 18 KB -
Labview Programmer Job Opening - Santa Clara, CA
Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o Must be well
organized and enjoy working in a dynamic environment.
o Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]Labview Programmer
-
Job opening for a LabVIEW / TestStand developer in Auckland, New Zealand
Position Description
Title: Test Systems Engineer – Data Acquisition/Test Systems
Roles: LabVIEW Development
TestStand development
Data Acquisition and Monitoring System Development
Project Management
Skills & Qualifications:
Minimum Bachelors Degree in Engineering/Science/Mechatronics/Computer Science
LabVIEW and/or Test Standard development (CLD/CLA). If not already qualified to this level, qualification would be expected with the first 2-3 months
Development Project Team Leadership skills
Technical Report Writing
Experience with Engineering Test Systems
Electronics development
Other relevant Computer Software development skills such .NET, SQL, Javascript, Python
Position Type:
Permanent
The Company:
CPE Systems is project driven design house develops systems for Data Acquisition and Test & Measurement and has successfully delivered hundreds of projects during its 17 year history. Located in Albany Auckland, the position offers easy access via car and public transport. While the successful applicant will complete most of their work from the Albany office, there is opportunity for short-term commissioning and support roles at client sites around New Zealand and Australia.
The company delivers innovative high tech solutions across a broad range of industries and key capabilities include:
Structural and condition monitoring
Engineering and scientific software
Data management and presentation
Control, automation and vision
Test systems
A relationship based business, with a strong people focus, the organisation is committed to professional design and project management processes that go beyond what is normally seen in the industry.
CPE Systems has 15 years experience in the management of over 600 projects, all of varying size, clientele, industry and application. We provide services to industry in five primary areas:
Test Systems
Structural Health and Condition Monitoring
Engineering and Scientific Software
Data Management and Presentation
Control, Automation and Vision
To support these capabilities, we have extensive skills in the following areas:
Project Management
Software Development
Electronics Design
Training
In Service Support
CPE Systems has developed its internal processes over the years to efficiently manage the entire lifecycle of our projects. The CPE database allows us to develop project plans, schedule tasks, monitor project progress, track sent and received goods, manage document versions, register and track project risks, and assess CPE’s performance on each project delivered.
We have a strong people focus, where relationships both internally, and externally with suppliers and clients, are treated with utmost importance.
The standards for performance and development in our industry are very high, so our company is strongly focused on developing and implementing professional design and project management processes that go beyond what is normally seen in industry.
Job Description:
The role is a Test System Engineering Position for a person with a Graduate qualification in Engineer/Science/Software with 4 – 5 years relevant experience in Data Acquisition and/or Test and Measurement systems.
The Test Systems Engineer will lead or be part of a Project Team involving CPE and will be involved in all elements of Data Acquisition, Real Time and Test & Measurement software and hardware projects including;
Requirements Analysis and definition
System Design
Software/Hardware Development
Verification
Report writing
Use of the CPE Systems Development systems
Other Engineering Tasks as required
The Test Systems Engineer will be given training on CPE Systems NZ Ltd development systems.
Opportunities
The Company has a strong focus on its staff, and will provide training in LabVIEW and other phases of the project life-cycle. Creativity and communication skills are valued and fostered in our people to ensure innovative, successful project outcomes.
Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution. -
Systems Engineer(LabVIEW)
Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal
Maybe you are looking for
-
How can I change the color of a folder icon and also the color of the text
I am using Yosemite. Is there any way to change the color of a folder icon and also the color of the text?
-
Urgent ! writing a java card applet -APDU problem
hi i'm fairly new to the java programming language. i'm trying to write an RSA java card applet to run on a java card simulator. I am not sure at all what code i need to write for the CLA byte in the command APDU and what code i need to write for the
-
I have an iCloud Mail account set up on iOS devices and on my Macs. I am not reliably receiving emails on the iOS devices and I do receive the emails just fine with the Macs. As far as I can tell I have the settings correct on the iOS devices (they
-
Courtest Call Back Query HELP!!!!
My name is Michael Love, I am having issues getting counts for Courtest Call Back. I need help building a query to get a count of all customers that Accepted Courtesy Call Back. I am also trying to fine out (of those that accepted Courtest Call Bac
-
Need image to move to...
ok I know I could just animate it but I would like to know this anyways and would make it faster and easier. I am wanting a iamge to scroll right to the center of the board. Basically the image to go from offscreen to move right.