LabVIEW created .DAT file with saving only new data on existing files

I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data every 1hr and since my test will last for many hours, the further along in the test the longer it would take to save the full file. I know Diadem has the capability to save in such a manner, so I have thought about after I write to Diadem have a small Diadem application save periodically, but I haven't found a way to save the .DAT file, with out any signals coming into the save function. I have attached the example .DAT file creater and saver I am using to figure it out. thanks for your help!

Howdy New Guy -
I am not sure if you are looking to append to a file, or if you would
like to overwrite a file. In either case, you can take a look at
the "Append To File.vi" example for DIAdem.
Either way, you may be experiencing problems because you are only using
the "DIAdem Simple File Write.vi" (found on the DIAdem >> DAT
Files palette). Instead, you can use the "DIAdem File Write.vi"
(located on teh DIAdem >> DAT Files >> DAT Files Advanced
palette). This VI can be set to overwrite or append to file.
I hope this helps in your development!
Andrew W. || Applications Engineer

Similar Messages

Please give me idea now I compile all branch data in head office only new r

Hi master
Sir I have 5 office In different city and one head office in Karachi all branch have same oracle system my question is how I get new data and compile for accumulative reporting
I want only new record and modify record not old record
Old record already I import
When I use oracle import and export tool that no give me right result
If xxx table exists in database then import tool not replace and no insert or no replace with previous data with new modify data
Such as
First time
V_no=897 have debit amount 3998 is Islamabad branch and i export form Islamabad and import in Karachi office
Next time
Islamabad office change v_no=897 debit amount with 76555 and add many new record
I export form Islamabad and import in Karachi office but system no change and not add new record in Karachi office
Please give me idea now I compile all branch data in head office only new record and modify record
Thanks
aamir

Here a very simple example with table EMP, assuming source table has a primary key. Firstly you create a materialized view log on source table (necessary for fast refresh) :
SYS@db102 SQL> conn test/test
Connected.
TEST@db102 SQL> create materialized view log on emp including new values;
Materialized view log created.
TEST@db102 SQL> then at destination DB/user :
TEST@db102 SQL> conn scott/tiger@test10
Connected.
SCOTT@test10 SQL> create database link test
2 connect to test identified by test
3 using 'db102';
Database link created.
SCOTT@test10 SQL> create materialized view emp_mv
2 refresh fast
3 as select * from emp@test;
Materialized view created.
SCOTT@test10 SQL>Now emp_mv is the exact copy of emp. To refresh the MV, to reflect changes :
SCOTT@test10 SQL> exec dbms_mview.refresh('EMP_MV','F');
PL/SQL procedure successfully completed.
SCOTT@test10 SQL> ...but I strongly recommend you to read the documentation...

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

Validating only new data

Hi.
Is there possible, after disabling constraints, populating new data into tables and enabling constraints again, to validate only new data and not the old one?
(DB: 10gR2 and newer...)

Karthick_Arp wrote:
Your old data are already on constraints. So when you disable and add new data and then enable the constraint the old data will not give you any issue. If at all you have any issue it will be with the new data.May you tell me why you're so sure? I have already read the documentation from boopathi's post and there is nothing mentioned about that.
From http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/data_int.htm#i4773 :
Constraint States
* ENABLE ensures that all incoming data conforms to the constraint
* DISABLE allows incoming data, regardless of whether it conforms to the constraint
* VALIDATE ensures that existing data conforms to the constraint
* NOVALIDATE means that some existing data may not conform to the constraint
In addition:
* ENABLE VALIDATE is the same as ENABLE. The constraint is checked and is guaranteed to hold for all rows.
I am now confused.
So you mean that when constraint is disabled the SCN of this operation is remembered and during ENABLE VALIDATE only rows with higher SCN are validated?

How do I create a track with just controller MIDI data in it?

How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-Mike

Soniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

How to create a user with read only access for ESB / BPEL Console

I need to create a user with read only access to ESB Console & BPEL Console. I have created a user
(esbreadonly) and assigned ascontrol_monitor role but user is still able to
delete services from ESB systems (such as DefaultSystem). Is there any way to
create a user that has strickly read only access to ESB Console & BPEL
Console
Thanks
Dinesh Patel

Check out this post.. I'm in the process of testing.
http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER, THE IMAGES ARE BALCK BOXES!

I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER THE IMAGES ARE BLACK BOXES.
THE FORM HAs (extend features to acrobat reader). THE FORM WAS DISTRIBUTED.
NON OF MY EMPOYEES CAN SEE THE IMAGES. WHAT'S WRONG? CAN YOU HELP?

However, the view large images is an issue for a form that is being distributed. Either a note needs to be added to the PDF to tell how to enable the view or the images need to be changed so that the enabling is not needed.

How do I create a pdf file that is only part of an existing pdf file??

How do I create a pdf file that is only part of an existing pdf file??

Use Adobe Acrobat. ExportPDF does not do this, or claim to do this.

Retain data in String Display untill new data is delivered in RS-232

I am using Labview 8.6 on Windows XP OS and acquiring signal from RS-232 through COM1 port to which I have connected non NI instrument. My instrument sends data for flash of second and it displayed into String Indicator for flash of second. How to hold this data untill I get new data from instrument. I have tried to select "re-initialise to default value" and "make current value default" but none of them getting selected. I want data to be retained untill new data comes. I have enclosed VI as well as Picture file. Pl advice.
Attachments:
HPLC Flow Meter 3.vi ‏32 KB
HPLC FLow 3.JPG ‏123 KB

-Looks you are sending or running the while loop every 5ms, are you sure you want this fast? This is the reason the data comes in flash(i think 5ms)
-I use shift register to store something from previous iterations generally.
-You need to keep case structure to check when new data comes and when it does, replace the value in that string.
-else pass previous value to string.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

A file with that name you specified already exists.

I'm using Deamweaver 8.0.1 on a Mac. My server is right next
to me and is also a Mac. Both Mac's are on OSX10.4.6
I connect to the server vis AppleTalk local network.
I guess I'm having a premission problem but whenever I try
and synchrnize I get an error like this:
Started: 6/14/06 8:39 AM
admin.php - error occurred - An error occurred - cannot put
admin.php. A file with that name you specified already exists.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
admin.php
Finished: 6/14/06 8:39 AM
I can manually copy files without error or insedent...
I have tried coping the entire site to the server, mannually,
again. I have deleted the site reference in Dreamweaver, quit and
then re-launch Dreamweaver and create a new site.

Update
I changed over to FTP connection with the host, just incase there was some weird wrong with my server. And FTP works fine from the command line, but Dreamweaver is seems goofed.
I "tested" the connection from the manage sites menu, its ok. The trouble remains when i upload files. Now, Dreamweaver says "error occured - An FTP error occured -- cannot put [file name] Access Denied. The file mau not exist or there could be a permission problem."
I have full access to the vsftp.conf file and I've allowed,
write_enable
local_mask
Any thoughs? Its entirely possible there is a simple explanation. I had this working before. Its just not working now.
Xtian

How to uncheck "Add as a new version to existing files" inside the "Add a document" dialog

I am working on a publishing site collection using the enterprise wiki template. Currently when users want to insert an image inside the rich text editor, they will be prompted with the following:-
And if the user insert a picture that already exists then it will replace the existing one, which might cause the picture to be displayed inside a Wiki page which it does not belong to !!
So is there a way to do any of the following:-
Give the new picture a unique auto generated name?
To un-check the   “Add as a new version to existing files” by default?
Or to always prevent replacing images, as this can cause many conflicts !!
Can anyone advice ?please?

You can do it using below script
http://webcache.googleusercontent.com/search?q=cache:51tmEQHanZoJ:vegardstromsoy.blogspot.com/2011/05/jquery-to-override-sharepoint-ootb.html+&cd=4&hl=en&ct=clnk&gl=in
$(document).ready(function() {
    if (document.title ==
"Upload Document") {
        $("input[id$='OverwriteSingle']").attr("checked",false);
        $("input[id$='OverwriteMultiple']").attr("checked",false);
http://hansiandy.wordpress.com/2010/10/19/sharepoint-20072010-tips-uncheck-add-as-a-new-version-to-existing-files-checkbox-on-upload-aspx-in-moss-2007sharepoint-2010/
If this helped you resolve your issue, please mark it Answered
but where i should add the following jQuery :-
$(document).ready(function() {
if (document.title == "Upload Document") {
$("input[id$='OverwriteSingle']").attr("checked",false);
$("input[id$='OverwriteMultiple']").attr("checked",false);
inside the master page or insdie the upload.aspx page ?

How to load a flat file with utf8 format in odi as source file?

Hi All,
Anybody knows how we can load a flat file with utf8 format in odi as source file.Please everybody knows to guide me.
Regards,
Sahar

Could you explain which problem are you facing?
Francesco

LabVIEW created .DAT file with saving only new data on existing files

Similar Messages

Maybe you are looking for