LabView Developer needed in Kyle (far South), Austin

Xtreme Power Solutions www.xtremepowersolutions.com delivers
integrated smart power management solutions from 500kW to 100MW.​
Proprietary solid-state power management and integrated storage enables
efficient and available power for an environmentally sound 21st century
electricity industry.​
We are looking for a talented,
resourceful, and highly-motivated LabVIEW software developer.  He/she will
be required to serve on a team of LabVIEW developers that is responsible for
developing and maintaining the company's energy storage SCADA systems.  He/she
will also be required to play a role in defining and realizing customer
specific software requirements.
Qualifications
5+
years of experience developing automated test, measurement, data acquisition,
and control systems.
5+ years of designing, developing,
implementing, and debugging LabVIEW and LabVIEW RT software.
Technical
requirements - Hardware
Broad knowledge of instrumentation and data
acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
NI FPGA, and signal conditioning.
Strong hands-on hardware troubleshooting and
debugging skills.
Technical
requirements - Software
Experience using Source Code Control Systems
like Subversion (SVN) and TortoiseSVN.
Familiar with software communication protocols
such at TCP/IP, UDP, and modbus.
Familiar
with all current LabVIEW application architectures.
Experience
connecting LabVIEW to third-party database systems such as MySQL.
Strong background in architecture design and
development.
Outgoing personality with good communication
skills, both written and verbal.
Experience creating documentation for large
scale LabVIEW projects spanning VI descriptions to system diagrams.
Experience writing software requirement
specifications.
Bachelor
of Science (BS) in Mechanical or Electrical Engineering. Masters of
Science (MS) a plus.
National
Instruments Certified LabVIEW Developer (CLD).
 Must be a US Citizen or Permanent Resident.
Preference is
given to local candidates.
Email resumes
to [email protected]

Dear Sir,
I would like to introduce myself over here. This is Vimal R. I had experience of 4 years in the instrumentation field .
Now I am looking for a change from my current assignment in india as well as  foreign countries in the same field (instrumentation).Here with i have attached my CV. Please find it . I have enclosed my expectation and other details below in short.
Expectation and details :
Field: Instrumentation.
Experience:  4 Years, in lab view development,  NI related hardware's, and other hardware.
Skills: Labview 7 to 2009, DIAdem, Test Stand,Machine Vision, Embedded Labview, Embedded C,C.
Certification: CLAD (Lab View Certification), CLD appeared.
Award Won: Rajapuraskar award, Rastrapathi Award in scouts,and  Star fish Award @ 2008 and 2009 in apna technologies.
Expected CTC: 6-7 Lakhs/ Annum (in india), Negotiatable for abroad.
Current CTC: 4.2 Lakhs/ Annum,
For more details please look at the resume, and do the needful.
Contact me on: 09590580872
Email ID: [email protected]
Thanks and regards,
Vimal.R.
Attachments:
4 year Experience CV_v02.doc ‏73 KB

Similar Messages

  • LabVIEW opening in Kyle, TX (south Austin)

    Primary Function:
    The LabVIEW Development Engineer will be a key member of small team of LabVIEW developers that is responsible for developing and maintaining the company's energy storage SCADA systems. There is Core software that is common to all customers and customer specific software requirements as well. He designs control systems for XP products.  We are not looking for long term contractors for this position, but someone devoted to our Team.
    Primary Duties:
    Writes LabVIEW Code.
    Unit Tests and debugs code.
    Designs, validates and maintains control systems (optional)
    Mentors others.
    Ability to travel up to 20% in support of remote sites and/or customer installations
    Qualifications / Experience:
    Bachelor of Science in Electrical Engineering or Computer Science.
    National Instruments Certified LabVIEW Architect (CLA) or equivalent experience.
    5+ years of designing, developing, implementing, and debugging LabVIEW and LabVIEW RT software.
    Technical requirements - Hardware.
    Broad knowledge of instrumentation and data acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time, NI FPGA, and signal conditioning.
    Strong hands-on hardware troubleshooting and debugging skills.
    Technical requirements − Software.
    Experience using Source Code Control Systems like Subversion (SVN) and TortoiseSVN.
    Familiar with software communication protocols such at TCP/IP, UDP, and modbus.
    Familiar with all current LabVIEW application architectures.
    Experience connecting LabVIEW to third-party database systems such as MySQL.
    Strong background in architecture design and development.
    Good communication skills, both written and verbal.
    Experience creating documentation for large scale LabVIEW projects spanning VI descriptions to system diagrams.
    Experience writing software requirement specifications.
    Excellent people skills, must be a leader.
    Previous start-up experience is a plus.
    Email your resumes to [email protected]  

    Dear Sir,
    I would like to introduce myself over here. This is Vimal R. I had experience of 4 years in the instrumentation field .
    Now I am looking for a change from my current assignment in india as well as  foreign countries in the same field (instrumentation).Here with i have attached my CV. Please find it . I have enclosed my expectation and other details below in short.
    Expectation and details :
    Field: Instrumentation.
    Experience:  4 Years, in lab view development,  NI related hardware's, and other hardware.
    Skills: Labview 7 to 2009, DIAdem, Test Stand,Machine Vision, Embedded Labview, Embedded C,C.
    Certification: CLAD (Lab View Certification), CLD appeared.
    Award Won: Rajapuraskar award, Rastrapathi Award in scouts,and  Star fish Award @ 2008 and 2009 in apna technologies.
    Expected CTC: 6-7 Lakhs/ Annum (in india), Negotiatable for abroad.
    Current CTC: 4.2 Lakhs/ Annum,
    For more details please look at the resume, and do the needful.
    Contact me on: 09590580872
    Email ID: [email protected]
    Thanks and regards,
    Vimal.R.
    Attachments:
    4 year Experience CV_v02.doc ‏73 KB

  • Certified LabVIEW Developer needed for an on-site project in Singapore (contract 15 - 24 days work)

    Hello Developers,
    Our client in Singapore (name of the MNC to be divulged to the interested candidates) has a project going on with us that involves NI OPC server & certain PLCs. The equipment is already supplied.
    We are looking for a CLD to do the LabVIEW programming on-site. If the work is satisfactory, there is a probablity of future projects to the developers.
    Interested? Please send CV to [email protected] including your CTC/ per diem rate. All interested candidates will be supplied full information so kindly email & do not reply here.
    Note: A valid CLD (or higher) certification is a must

    Hi
    I completed M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 22 months of experience with LabVIEW and have the follwoing skills.
    Intermediate-to-advanced knowledge of LabVIEW.
    Familiarity with data acquisition concepts and hardware.
    Ability to troubleshoot electrical and electronic systems at the module and equipment level.
    Discipline and organization with respect to software maintenance and version management.
    Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
    Ability to travel
    you can reach me at [email protected]
    Thanks & Regards
    Anil Punnam

  • Need Sr. LabVIEW Development/Controls Engineer in Kyle (Austin), Tx

    Xtreme Power Solutions is
    currently looking for Sr. LabVIEW Development/Controls Engineer to support the
    Battery Energy Storage System Division.  
    This position will be based in Kyle, TX.
    Xtreme Power Solutions delivers
    integrated smart power management solutions from 500kW to 100MW. Proprietary
    solid-state power management and integrated storage enables efficient and
    available power for an environmentally sound 21st century electricity industry.
    www.xtremepower.com
    Primary Function:
    The Sr. LabVIEW Development/Controls Engineer will lead a
    small team of LabVIEW developers that is responsible for developing and
    maintaining the company’s energy storage SCADA systems.   There is Core software that is common to all
    customers and customer specific software requirements as well.  He designs control systems for XP
    products.  The position is initially for
    a Team Lead, but may develop into a manager role.
    Primary Duties:
    Lead of
    team of four to six LabVIEW or software developers
    Work with software
    team and project engineers to establish standards and procedures
    Writes
    LabVIEW Code
    Unit Tests
    and debugs code
    Designs,
    validates and maintains control systems.
    Mentors
    others
    Ability to
    travel up to 20%  in support of
    remote sites and/or customer installations
    Qualifications
    Bachelor of Science in Electrical Engineering or
    Computer Science.  
    National Instruments Certified LabVIEW Architect
    (CLA) or equivalent experience
    10+ years of experience developing automated
    test, measurement, data acquisition, and control systems.
     5+ years
    of designing, developing, implementing, and debugging LabVIEW and LabVIEW RT
    software.
    Technical requirements - Hardware
     Broad knowledge of instrumentation and data
    acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
    NI FPGA, and signal conditioning.
     Strong hands-on hardware troubleshooting and
    debugging skills.
    Technical requirements – Software
     Experience using Source Code Control Systems
    like Subversion (SVN) and TortoiseSVN.
     Familiar with software communication protocols
    such at TCP/IP, UDP, and modbus.
    Familiar
    with all current LabVIEW application architectures.
    Experience
    connecting LabVIEW to third-party database systems such as MySQL.
     Strong
    background in architecture design and development.
     Good communication
    skills, both written and verbal.
     Experience creating documentation for large
    scale LabVIEW projects spanning VI descriptions to system diagrams.
     Experience writing software requirement
    specifications.
    Excellent people skills, must be a leader. 
    Previous start-up experience is a plus
    Must be a
    U.S. Citizen or a Permanent resident.
    Please
    email resumes to [email protected].  Thank you for your continued interest in
    Xtreme Power Solutions, we look forward to being in touch with you.

    Sir,
    I am an instrumentation and control Engineer with  3+ years
    experience.I am worked area is Process and Plant Design,Automobile
    testing Machine and test rig Design,Special purpose machine Design.I
    have knowledge in program developer of  DCS,PLC,HMI,SCADA,LABVIEW  as well
    as trouble shoot.I am very interested in this job.
    Thank you,
    Shanmugam.J
    +91 984042082

  • Technical competition team needs Labview Developer

    The KC Space Pirates are a team in NASAs Beamed power competition.
    We are looking into using Labview to automate aiming a high power laser.
    I am looking for an experienced Labview developer to help with the project.
    There is no pay if we don't win. If we do win the pay will be generous.
    So if you are something of a gambler and want some aerospace experience we should talk.
    Brian

    Mr. Turner,
    You have my curiosity.  I used to work for United Space Alliance on KSC.  My wife and I still live near Cocoa, so I'm not far away.  She still works on Cape Canaveral.  I have had a good bit of experience with version 7.1 and I have the CLAD certification.  I was very close to being ready to test for the CLD certification, but unfortunately, I changed jobs to where I am now and I don't use LabVIEW at work any more.  I'm still going to study for and get the CLD since I really like LabVIEW and have a few ideas for a few of my own projects.  I have a couple NI PCI DAQ cards I can play around with at home.
    Anyway, I'm very curious about your project and am willing to consider joining you.
    Thanks,
    Brad

  • LabVIEW programmer needed for full time position, Orange County CA

    Anaheim CA 92801
    [email protected]
    Job Title: Project Manager
    Job Type: Permanent
    Job Location: Anaheim CA
    Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)  
    Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
    Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
    40 hrs/wk at our Orange County facility.
    What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
    Salary Offered: $60K-80K based on experience and qualifications  
    The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
    Attachments:
    ETU and Staff.jpg ‏186 KB

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • LabView expert needed ASAP

    LabView expert needed ASAP to help complete a project. Specific skills
    needed are database connectivity experience with the LV Database
    Toolkit. Initial phase is approx. 15-20 hours of work with the
    potential for much more if we find the right person. Must be in Austin,
    TX for initial on site work.
    Job location is Austin, TX.
    Compensation: $50-75/hr

    Hello,
    My name is Robert Bohannon and I reside in the Denver, CO area. I’ve attached my resume for your review. I have been doing automated test system development for over 15 years and have been an independent consultant for over 5 years. I’m writing you to express my interest in your job posting in the LabView Job Openings Forum. I am currently looking for contract opportunities and I believe that my services could be of great value to you.
    Please review my resume and if you find any experience of mine that may potentially fit your job requirements, please let me know. I will provide references upon request.
    Thank you for your time.
    Robert Bohannon
    Attachments:
    resume.2006.05.21.pdf ‏315 KB

  • Seeking Labview Developer in Nothern Illinois

    LabVIEW Developer
    Company: Tecnova
    Description
    Tecnova is a National Instruments Alliance Member with a growing LabVIEW Department.
    Come join our expert team!
    We are looking for a self motivated LabVIEW Developer who will own their projects, complete tasks on schedule and on budget while building a relationship with the customer.
    Must have broad experience in the following areas:
    * Program and document robust LabVIEW applications which include user Interface, database, test sequencing, instrument communication, data acquisition and PID control
    * Design and execute software test plans
    * Prepare end user documentation and help file content
    * Develop automated test, data acquisition, and control systems
    * Contribute to multiple projects, and help develop pushing-the-envelope technology
    * National Instruments hardware (PXI, cRIO, Field Point, etc.) experience desired
    * Contribute to system design and specifications
    * Involves extensive customer contact and moderate travel within Chicagoland area
    * Must be intelligent, creative, and self-motivated
    Requirements
    * BS in Computer Sciences, Physical Sciences or Engineering
    * 3 years of practical experience in LabVIEW programming
    * High comfort level with scientific and technical terminology and the willingness to learn
    * Test and measurement experience
    * Must be self directed and able to meet objectives as directed
    * The ability to effectively work independently in a fast paced environment, with experience adapting to changing requirements and to rapidly absorb new concepts and apply them effectively is essential.
    * You must also have good communications skills. Presentation and communication skills, as well as being able to work in a team, are crucial.
    Preference will be given to applicants with the following skills:
    * Certified LabVIEW Associate Developer (or better)
    * National Instruments hardware (PXI, cRIO, Field Point, etc.)
    * Communication protocol (RS-232, GPIB, TCP I/P, USB, Bluetooth, etc.)
    * Motion control
    * Vision control
    * PLC (Allen-Bradley, Honeywell, Modicon, Siemens, etc.)
    * Schematic capture (OrCAD, AutoCAD, etc.)
    * Database connectivity
    * Application and instrument driver layers
    * Experience with National Instruments PC based DAQ devices
    * Experience with various sensors and transducer signal conditioning (microphones, accelerometers, temperature sensors, etc.)
    * Actively involved in the LabVIEW community
    Additional Requirements:
    * Local Candidates Only
    * Location: Gurnee, Illinois (Northern Chicago Suburb)
    * No 3rd party resumes accepted. Principals only, no agencies or contractors
    * Must be a Citizen or Permanent US resident, authorized to work in this country for any employer
    * Because of the immediacy of this position, we are unable to sponsor people at this time.
    About Tecnova:
    Tecnova is a leading electronic product development and engineering firm that provides custom electronic hardware, mechanical, and software solutions. We offer exciting professional challenges, variety, and plenty of opportunity to roll up your sleeves and make a difference. Located far north of Chicago in Gurnee, Illinois, we offer excellent salary/benefit package with 401K. We are looking for innovative, creative, results-oriented people that desire a wide variety of projects in a challenging, fast-paced environment.
    For more information about Tecnova see our website at www.tecnova.com.
    Contacting Tecnova:
    For immediate consideration, please send resumes to [email protected]

    I am writing to put myself forward. As you can see from my CV, I have many skills pertinent to this role gained for less than 1 year as a successful Research Assistant. I am having very good knowledge in mathematics.I wish to move into this sector because it is a fast-moving environment and I am also interested in new technology.  The skills that I have and believe to be highly relevant to this job and your company which include: Analytical thinking, Self motivated, Fast learner and staying calm under pressure. Additionally, I have undertaken CLAD course and qualified with 80% and believe my unique blend of skills can offer a great deal.I am confident that I possess the attributes you’re looking for and that my experiences gained in Research Assistant would provide invaluable insight and capability to your organization. I would welcome the opportunity to discuss my application in person.
    Attachments:
    Resume.doc ‏44 KB

  • Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

    I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
    ErrorCode: -17600,
    Failed to load a required step's associated module.
    LabVIEW Run-Time Engine version 9.0.1f3.
    When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
    My TestStand Engine Version is 2012 f1 (5.0.0.262).
    I'd appreciate any help on this issue.
    Roman

    Hi Roman,
    There are a couple of things you can try:
    1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
    Check if the simple VI is loadable and runs without errors in TestStand.
    If the step generates the same error, you should try a re-install of the LabVIEW development system.
    If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
    1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
    Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
    Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
    2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
        Right-click "Build Specifications" and choose "New->Application(EXE)".
        In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
        Save the properties.
        Right-click on the newly created build specification and choose Build.
    Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
    You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
    Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
    If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
    Regards,
    TRJ

  • LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

    LabView "Guru" needed for the summer (4 month project)
    I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months.  Specifically, the ideal person will have the following:
    LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
    80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
    Printed Circuit Board experience a plus.
    4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
    The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr. 
    Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

    Sounds like Parker-Abex (LabVIEW 6.1 part)
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • LabVIEW Developer, Full Time, ISRAEL

    QualiSystems (www.qualisystems.com) is looking for great people who love LabVIEW. We take pride in our code and by taking LabVIEW to its limits we have a need for only the best in the field. Here are the details:
    LabVIEW Developer - Position #4038
    Requirements:
    4 years (or more) of experience in LabVIEW
    Advantages:
    Experience in Hardware QA.
    Experience in the following fields: Communication, RF, Power, Digital
    Experience with C/C++/C#
    Experience with Scripting Languages
    Experience with Communication Protocols
    Experience with Databases
    LabVIEW certification
    A little bit about the company:
    QualiSystems is a pioneer in the field of Functional Test Automation (FTA).
    The FTA world is evolving from a collection of various tools to an enterprise quality management platform. QualiSystems' mission is to be the leading software company in the new FTA era.
    QualiSystems' TestShell™ unique solutions consist of a suite of integrated applications that enables our customers to test, manage and optimize quality throughout the entire product lifecycle. These solutions enable the creation of complex high quality products, shorten time-to-market and significantly reduce costs. TestShell applications turn the functional testing process into a complete quality optimization solution.
    QualiSystems' TestShell is used by leaders in industries ranging from telecommunications, cellular, aerospace and defense, consumer electronics, medical devices and semiconductors.
    The company headquarters and expert R&D team are located in Israel. QualiSystems growing global presence includes representatives in Northern and Central Europe and North America.
    Please visit our website (www.qualisystems.com) for more information.
    Please send your resumes to: careers (at) qualisystems (dot) com

    Hello Amiram,
    if the position is not yet filled, pm me at coldchemist(at)gmail.com.
    Thanks.
    ... And here's where I keep assorted lengths of wires...

  • LabVIEW developer in UK

    My company a large multinational with more than 10000 employees worldwide, is currently looking for an "entry level" LabVIEW developer in the North East of England, although all levels of experience could be considered.
    If anyone is interested, please email your CV and Covering letter to [email protected]
    This is the Job description:
    1.    General information
    The Engineer will work as part of a team developing software and hardware applications that support the needs of manufacturing.  These will include in-house developed solutions for automated assembly, functional test and production monitoring. The Engineer will develop expert knowledge of the company's products and systems in order to best support these developments.
    2.    Job Objectives
    Efficiently design, program, document and maintain robust, user friendly, software and hardware solutions that reliably provide the required functionality and performance levels to support manufacturing processes. 
    3.    Opportunities
    Work with a wide range of technologies (software, hardware and product). 
    Develop personal skill levels with support towards achieving recognized LabVIEW qualifications.
    Participate in both site wide software initiatives and stand alone test or application solutions. 
    Work alongside experienced LabVIEW developers.
    4.    Place in the organisation
    Direct Manager: Manufacturing Engineering Manager            (via Senior Engineer)
    Reportee(s):            0
    5.    Description of duties
    Contribute to generation of software requirements and specification documentation
    Generate appropriate documentation and records during software creation, amendment and testing, utilizing standard revision control and review procedure.
    Propose and implement new/best practice software development techniques
    Contribute to creation of future strategic targets
    Assist with the training and guidance of apprentices, operators or others where appropriate
    Undertake training and development activities where appropriate
    Occasional travel off-site to conduct inspection of new equipment, attend training courses and provide support to remote sites
    6.    Required competencies
    Education:
    Essential
    Degree level qualification or similar experience
    Desirable
    Degree in Science, Engineering or relevant Technical Subject
    Experience:
    Essential
    Previous experience creating software to interface with hardware using LabVIEW
    Desirable
    Experience of an industrial work environment
    Skills & knowledge:
    Essential
    Experience of LabVIEW programming, CORE 2 level
    Experience with automation hardware
    Desirable
    Knowledge of developing test software for automatic execution
    Experience with other programming languages (C, Assembler, Java etc)
    Object oriented programming knowledge
    Knowledge of SQL database implementation

    Dear Sir/Madam:
    May I know what is the company? I would like to know its name in order to be aware of future similar opportunities.
    Kind regards.
    Attachments:
    Presentación Julio 2011.ppt ‏2943 KB

  • LabVIEW Developer + Software/M​echanical Engineer

    Hello,
    I am a LabVIEW developer with 3 plus years of experience in developing software applications for data acquisition, instrument control, motion control and image acquisition. I have a ME in Mechanical Engineering(control systems) from Texas A&M University. I am a Certified LabVIEW Associate Developer and currently working towards CLD status. I am located in TX and looking for fulltime opportunties as a Software Engineer/LV Engineer/Test Engiener. Willing to relocate, if the job is challenging and the offer is right.In addition to LV programming skills, I am experienced in J2EE,C++, object oriented methodology, UML and Visual Basic. If you are interested in my profile, send me an email and I will reply back with a full resume.Message Edited by marooner on 04-15-2005 01:30 PM

    Adecco Technical is the leading provider of contract personnel and related staffing services. As a division of Adecco, the world's largest staffing company, ($13 Billion in sales), Adecco Technical has more than 100 offices in the U.S. alone.
    Job Title: Labview Programmer
    Labview Programmer with experience in motion control and high speed data acquisition.
    RESPONSIBILITIES
    The work incorporates the design and programming of specialty software for the motion control of high speed linear motors for the positioning and scanning of inline production parts.
    Other projects include controls for process equipment.
    This position requires a person who is well organized and can self manage a project from start to completion.
    High degree of detail and the desire for perfection in the final product.
    Perseverance to complete, detail, document and deploy the software.
    REQUIREMENTS 
    A four year degree in Engineering is preferred.
    Five years experience in Labview with at least three years in associating Labview in manufacturing automation and control.
    The drive to accomplish projects and the need to get it right.
    Thanks!
    Elise Reisinger
    Sr. Technical Recruiter
    Adecco Technical
    6081 E 82nd St., Suite 403
    Indianapolis, IN 46250
    317-842-2870
    800-346-1203
    [email protected]

  • Exciting LabVIEW Development role in Calgary, Alberta, CANADA

    Exciting LabVIEW Development position Available – Calgary, Alberta, Canada
    Want to work for a Great company that truly values it’s employees?  This is a highly respected oil and gas services company that offers a Corporate Culture second to none.  We are looking for a LabVIEW developer to join the R&D Team; this is a challenging role ideally suited for someone with an Instrumentation and/or Mechanical Engineering background.
    Role Overview:
    This is a busy and growing oil and gas services company with a long stable history, a strong balance sheet and a corporate culture of success and flexibility.  The candidate will be responsible for software research and design activities.  You’ll actively participate in feasibility studies to develop concepts into products (Prototypes).  You will also evaluate and design software products using Labview that control electric/mechanical and electric/hydraulic systems for the oil and gas service industry.  Developing and executing test plans and specifications along with data analysis are also part of this role.
    Duties:
    Initiates and leads team activities to evaluate and develop creative solutions to optimize products and technologies
    Designs software for control, human interaction, reporting and logging as required for feasibility studies
    Confirms system and product capabilities by designing feasibility and testing methods and testing properties. Evaluates testing data to reach design decisions.
    Supports evaluation of performance of equipment in the field, resolution of problems and recommendation of improvements.
    Provides information to be included in proposals, specifications and applications.
    Analyzes opportunities to strengthen product / company performance including soliciting customer requirements and observations from oil and gas clients
    Conducts training and mentoring.
    Supports project management of software development activities.
    Documents designs regarding configuration, operation, and capabilities.
    Follows corporate standards for software development.
    Qualifications:
    Demonstrated ability in software design and product design using National Instruments LabVIEW and potentially other high level languages
    University degree in Physics, Engineering or equivalent experience.  Engineering Degree and Professional Certification preferred.
    Demonstrated learning from experience, including analyzing information, identifying client needs, developing action plans, and delivering recommendations.
    Extensive background in data acquisition and control systems in oil and gas services and instrumentation in general
    Hands-on experience with demonstrated innovation and creativity.
    Excellent analytic skills and experience trouble shooting complex software problems.
    Experience functioning within teams to address and solve business and engineering issues.
    Demonstrated ability to communicate effectively both verbally and in writing. Strong technical writing.  Demonstrated experience using the Microsoft Office Suite.
    Familiar with industry standard practices and tools for creation, development, testing and documentation of software. 
    Demonstrated effective resource and project planning, decision making, results delivery, team building, and the ability to stay current with relevant technology and innovation.
    Ability to be effective while simultaneously involved in multiple projects.
    We will consider intermediate to senior level candidates; compensation is commensurate to experience. This is a permanent, full time role located in Calgary, Alberta, CANADA; candidates must be Canadian Citizens or have legal working status in Canada.  Candidates from outside of Canada without legal Canadian working status will not be considered.
    PLEASE contact:  Marcello Barone at [email protected] for immediate consideration.
    Attachments:
    LabVIEW Developer.docx ‏18 KB

    Have you filled this position?  I'm interested, but don't know about the Canadian work requirements.  I'm a U.S. citizen, working in the U.S.  I'd assume that it wouldn't be that difficult to get the Canadian permission...
    Also, would you consider someone for remote employment with occasional trips to the facility?
    Thanks!

  • NI Certified LabVIEW Developer, NI Week Winner, Author of LabHSM, a Toolkit for Complex Event-Driv​en Developmen​t in LabVIEW

    Thank you for your interest. If you need a LabVIEW developer, you will find that my resume which is attached, outlines why I am an excellent fit for a position with your company.
    In addition to my broad educational background including two Masters Degrees in Electrical Engineering and Physics, numerous Computer Science courses taken, and twelve years of diverse experience in programming, system administration, and support, I am a National Instruments Certified LabVIEW Developer. As you can see on the National Instruments website, there are only about 400 people worldwide who were granted this title. I have a history of numerous successful projects in the areas of industrial automation, control and data acquisition. In particular, I have implemented several LabVIEW test systems projects including the following:
    - Real-Time Natural Gas Mixtures Characterization System, based on near infrared absorption spectroscopic data for Gas Technology Institute;
    - Real-Time Electron Beam Doses Monitoring, Beam Parameters Measurement, and Ion Charge Measurement Systems for Steris Corporation (NI WEEK 2003 BEST APPLICATION CONTEST WINNER in R&D/Lab Automation Category);
    - Control and Data Acquisition Program for an Electron Spectrometer System in the Western Michigan University Accelerator Laboratory;
    - LIMS II (Temperature Test), Surge Test Automation, Locked Rotor Test, Variable Ambient Chamber Control and Data Acquisition systems for Underwriters Laboratories (UL);
    - Abrasion Wear Test for Caterpillar;
    - Distributed Data Acquisition and Reporting System for Hydraulic Spray Nozzles Testing for Spraying Systems Co.
    Descriptions and code examples of projects I have done are available upon request.
    It was me who created LabHSM (http://labhsm.com), a toolkit for advanced event-driven development in LabVIEW. It allows creating complex applications as a collection of active object type components that have uniform structure, but different purposes. Each component runs independently providing services to other components and exchanging data via standardized queued messages. The resulting code has the same structure and looks similar regardless of specific functionality. It is easily readable and modifiable by developers other than the author. LabHSM implements the powerful paradigm of hierarchical state machines (Harel/UML statecharts) and has a separate specialized editor for defining component behavior on a higher level of abstraction.
    I also have done several projects involving HMI, digital I/O, motion control, communication between a PC and PLC's, using Visual Basic, Think & Do, Steeplechase and other software tools.
    My experience and background enable me to master any software development tool quickly, making me a perfect candidate who can always keep up with the ever-changing world of computer technologies.
    I am looking forward to discussing this opportunity with you.
    Sincerely,
    Stanislav Rumega
    The web version of my resume is available at:
    http://styrum.bizhat.com
    Attachments:
    Stanislav Rumega Resume 02-2005.zip ‏26 KB

    Symtx is currently hiring the following position. Please contact me if interested.
    Amy Cable
    Symtx, HR
    [email protected]
    Symtx, the leading supplier of functional test equipment, hires the brightest & most talented engineering professionals to design & manufacture complex custom electronic systems for advanced technology leaders in the defense, aerospace, communications, medical, transportation & semiconductor industries. Symtx’ challenging & dynamic work environment seeks to fill openings with highly qualified electronic engineering design professionals.The ideal candidate will be responsible for defining the requirements, software design and code development, and integration of test control software for custom functional test systems. Candidate should be familiar with data acquisition concepts, instrument control, complex test, measurement and calibration algorithm development and definition and implementation of control interfaces to hardware. Prefer familiarity with instrument control via GPIB, VXI, MXI, RS-232 desirable. Requires BS/MSEE and 3 -7+ yrs of experience in one or several of the following test applications in a Windows NT/2000/XP environment using Labwindows CVI, TestStand, Labview, Visual Basic, C++ and knowledge of RF systems is a plus. Job responsibilities will include software design, development, integration, team leadership, and interfacing with customers( includes PDR’s & CDR’s).

Maybe you are looking for

  • Enterprise Manager is not able to connect to the database instance....

    Hi all, Currently i'm facing a big issue here. I have install the Oracle 10g on Window 2003 SE. And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up. But from the Enter

  • Error message when trying to open AI file

    When I double click an AI file to open it, I get this message: "Can't open the illustration. There is not enough room for the window, increase document area and try again". This error started happening about a week or two ago. Although it is inconven

  • My 2009 24" iMac, taking forever to boot...help!

    I need help and some advice on my 24" (2009) iMac running OS 10.7, my computer is taking forever to boot up. I was downloading MS Word 2011 via wi fi and then it froze. I shut the computer down by pressing the power button and restarted the iMac up a

  • Re-install issue

    my gf totally deleted my ichat application. Any place ive tried to download it I get something about not being able to do it on this volume? Anyway is there a way i can reinstall it without the startup disk? Im using version 10.4.10 thanks

  • Word documents

    Is there any way to save word or pdf docs on the iphone? I was hoping it would work more like my Sprint PPC 6700. I hope I didn't make a mistake by changing to the iphone - I use it for work and school and need to store documents. Thanks! mac book