Labview Engineers required : Pune
We are a leading developer of training solutions using simulation technology. Please visit our website www.teklearn.com for more details about our company. We require freshers or candidates with 1 year experience. The candidates should be able to develop various logics into labview. Should possess strong knowledge of C. Please send your resumes at [email protected] with the subject : Application for the post of LabVIEW Engineer
Hello sir
I Priyanka Kore have completed BE(Electronics and telecommunication) in 2013 and I am working as a Project fellow in CSIR - National Chemical Laboratory(NCL). I have 8 months experience of working on LABVIEW software.
I have attached my resume.
Regards
Priyanka Kore.
Attachments:
Resume- Priyanka Kore.docx 20 KB
Similar Messages
-
I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG 36 KBother PNG
Attachments:
Broken Arrow on EXE.PNG 179 KB -
Jambhekar Automation Solutions is looking for 1-2Yr experienced LabVIEW engineers as well as freshers Trainee LabVIEW engineers
LabVIEW Engineer
Should have 1-2 Yrs of LabVIEW experience
Should have hands on experience on DAQ, serial, tcp, modbus etc.
Should be well versed with programming architecures and advanced LabVIEW concepts
Vision development experience will be an added advantage
CLAD/CLD certification will be an added advantage
If you are applying for this position please set subject of email as "Application for the post of LabVIEW Engineer"
Trainee LabVIEW Engineer
Should have BE/M.Sc. in electronics/instrumentetion streams
Should be aware of basics of LabVIEW programming
If you are applying for this position please set subject of email as
"Application for the post of Trainee LabVIEW Engineer"
Please send your resumes to [email protected]
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My BlogHello sir
I Priyanka Kore have completed BE(Electronics and telecommunication) in 2013 and I am working as a Project fellow in CSIR - National Chemical Laboratory(NCL). I have 8 months experience of working on LABVIEW software.
I have attached my resume.
Regards
Priyanka Kore.
Attachments:
Resume- Priyanka Kore.docx 20 KB -
Hi,
I had created an executable in LabVIEW 8.6 on a windows XP 32 bit PC. The application uses some Vision VIs. The executable runs in most of the PCs except one. the PC is a windows 7 64bit. Initially i got the error "Labview Load error code 3: could not load front panel". I fixed this by changing the source file settings in the application builder. Now i am getting the error "VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors" and the exe shows a broken run button.
But if i build the exe in the same PC i get no errors and it works fine. Moreover i have tested this exe in a different PC with the same configuration, it works there. I have tried reinstalling labview in the PC the problem still persists.
Solved!
Go to Solution.Hi Rajshekar.
> Which version of LabVIEW are you using on PC with Win7 64bit? would like to check if there are any issues with LV2009 32bit on 64bit OS..
- The version of Labview on the win7 64bit PC is also lv8.6 full development system.
> Do you get the same error on the other PC with same config(Win7) when running the .exe generated using LV 8.6 on WinXP 32bit? just to make sure the problem is with OS or LV..
- the same problem occured at one more PC with the same configuration. but when i tested in an another PC of the same config it worked i am not able to isolate and decide that the error is based on one particular PC config.
I have listed the environments in which application ran and how the application was put in to the PC.
I would also like you to know that i have created an installer for the exe. I am also using NI vision in my application and this is the error "An error occured loading VI 'IMAQ GetImagePixelPtr'. LabVIEW load error code 3: could not load front panel"....and rest is what i said in my previous post
1. Use the installer to install the application.
2. just copy the exe created in LV 8.6 into a PC that already has LV development system installed in it
3. The PCs might either be a blank one with no history of LV installed in them
4. The PCs might have diffrent versions of LV development systems installed in them (8.2,8.5,8.6,2009)
All PCs that have LV development system(s) installed in them, was able to run the application except the one with win7 64, where i have tried uninstalling all NI software and use only the installer to install, install LV 8.6 full development system and try runnning the exe, nothing works.
Thanks -
We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
ChrisThanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris -
LabVIEW & Vision Position, Pune, India
VI Automation, Pune is looking for a LabVIEW (6+ months) and Vision (6+ months) programmer.
The right individual will be responsible for the following:
- Design and develop LabVIEW and Vision programs
- Adding to a library of reusable modules
- Be a diligent user and promoter of Source Code Control
- Assist troubleshooting HW/SW interaction
- Be an integral part of the team but work with minimal supervision.
The Job Details are as follows:
Job Title: Labview and Vision Programmer
Locations: Pune, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 6+ Months
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X and above
Familiarity with NI Vision
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English Desired
Experience executing verification and validation for projects
If interested please send your resume and contact information to:
[email protected]
www.viapl.comHi,
My name is Dinesh; I am a B.E Graduate in
Electronics and Communication working in Labview platform
My current profile includes
overall 18 months experience in Labview+ MATLAB.
I have 15 Months of
experience in Labview using various National Instruments Hardware such as SCXI,
DAQ cards & software such Labview 8.2/8.5&8.6, Measurement &
Automation Studio, NI Vision Assistant, Labview Report Generating Toolkit etc.
Please go through my resume as in attached
file and kindly revert back if my profile matches with your requirements.
Please contact me at [email protected] or 9941537378 for further details.
Thanks
Regards,
Dinesh
Mobile: 9941537378
Mail: [email protected]
Attachments:
Dinesh Resume.doc 74 KB -
Test Engineer (LabVIEW/TestStand) Required - Detroit, Novi - Michigan
Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Location: Novi, Michigan
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the contact details to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Thanks
Vijaycross-posted on https://lavag.org/topic/18822-test-engineer-labviewteststand/#entry113145
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice -
CLD or CLA LabVIEW developer required by UK based Select Alliance Partner
Cal-Bay Systems in the UK are looking for talented LabVIEW developers to join our team. Must be qualified to at least CLD level with experience in test including a good understanding of sensors and signal conditioning techniques. SQL, .NET and sharepoint experience will also be advantageous. Contact [email protected]
Office based in Swindon but working from home may be an option.Dear Sir/Madam,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my C.V. attached and contact me at your most convenient.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx 24 KB -
Labview programmers required at ELI beamlines, Prague
Work on the largest and most exciting open-access laser physics research facility in Europe, due to be opened in 2016. We are looking for talented LabVIEW developers at all levels to develop groundbreaking control systems for our four Petawatt syncronised femtosecond laser beamlines and six multi-science experimental target stations. Join a large international research team located in one of the oldest and most beautiful cities in Europe.
For vacancies see http://www.eli-beams.eu/jobs/, or send your structured CV with a motivation cover letter to [email protected]We are looking for the best and the brightest engineers to build Europe's largest and most ambitious laser research facility. If you think you have what it takes but don't see a post that fits you, message me or email [email protected]
Attachments:
Control-systems-applied-scientist-ELI-T_CS011.pdf 171 KB
Control-System-Engineer.pdf 301 KB
Programmer-LabView.pdf 266 KB -
LabVIEW consultant required in Ballarat, Australia
I have an automotive test machine running a LabVIEW interface, controlled by a NI acquisition card.
It would be polite to describe the machine as "legacy". The entire machine is dinosaur era. The NI / LabVIEW upgrade was done in-house by somebody long since departed. The hardware belongs in a museum and the control PC has been running on borrowed time for at least a decade.
I need an experienced LabVIEW consultant to bring the machine back up to date; replace hardware with current supported models, and update software to suit.
Any local (ie Melbourne) LabVIEW contractors should drop me a line at [email protected], or call me on 03 5327 0318 to discuss.
Thanks,
TimDear Sir,
I am working as application engineer and completed my M.Tech. Project (for GM and ISRO) from IIT Kanpur in Smart Systems Lab, Mechanical Engineering Dept. IIT Kanpur. I have 1.5 year of job Experience as junior R&D engineer. I have profound experience in developing microcontroller and LabView based system and my research work reflects it.
DAQ and software interfaced while doing projects:
LabVIEW- 7.1- 8.0
Interface of various sensor like RTD, PVDF, Bi-morph, Theromcouples, LVDT, Strain gauge and Optical Encoders through DAQ.
Motion Control : Servo and Stepper.
DSP- Speedy 33 and DSp module
Basic of DSC and Image IMAQ.
You can mail me for further details at [email protected] May I can justify your requirements.
Waiting in anticipation.
Thanking you,
Yours Truly,
Om Prakash Patel.
Message Edited by ni_op on 09-18-2006 08:58 AM -
Free Lance Labview Developer Required Urgently!!!!!!!!
Hi there,
We need a free lance Labview Developer from India for our upcoming project. Our company is bahrain. Applicant must have 5+ years experience.Hi XFACTOR,
This is not the right place to post about job requirement. Please post here.And also provide more information like where the resume to be sent? -
Is LabVIEW Runtime required for a DLL created by LabVIEW ?
Hi
Could some one advice me on this matter please.
I am trying to build a DLL for a set of functions created in LabVIEW. Now I am wondering if I need to use it with some other language like VB or C++, do I need to install the LabVIEW runtime of the same version as the original functions ?
Any settings required while creating the DLL ?
I am trying to create it in LV 7.0
Thanks in advance
Deepu.Alright Mike,
Thanks !
I was hoping it would work without the LabVIEW runtime. Anyway, thanks for the quick reply.
Rgds
Deepu. -
Urgent labView coding required
sir, can you please bulid a VI for me that-
1]From Relay Off to On Position-
can initiate a timer (When 'x' is ON), as well as turn ON a Numeric Indicator that displays the corresponding input voltage and when ('y' is ON), stops both the timer as well as the indicator and they both hold their values and must have a reset button to reset the values...
2]From Relay On to Off Position-
Also, now when ('x' and 'y' both are ON), when 'x' goes OFF, the timer should initiate and the indicator should display the corresponding input voltage and when 'y' goes OFF, both the timer and the indicator should stop, and they both hold their values and must reset their values..
Sir, will it be possible to use two use timers and two indicators for this purpose.. sir, please help me out, me in a complete mess...Please keep all related questons in one place:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=325397&jump=true
Thanks!
LabVIEW Champion . Do more with less code and in less time . -
Oracle Developers/DBA'S/Software Engineers Required Immediately
We are constantly looking for experienced professionals, who are determined to make difference in their lives.
Company: Annuk
Location: Washington DC
Candidates with 3+ years of experience need to apply. Please forward your detailed CV to [email protected]
For More Information/Other Positions Please Call us at 703 652 0942Read this...
Java Developers/J2EE/Programmers Required Immediately
Greetings,
Simon -
LabVIEW deveoper required for Kitchener On. Canada
Hi all,
Meikle Automation is looking for a LabVIEW Programmer. An overview of the MASS software can be found at: http://www.meikleautomation.com/products/mass.php
This position is in our facility in Kitchener Ontario Canada.
Apply at: [email protected]
Dean MillsIm a 30 years Electronic Engineer interested in your position please see my resume and advanteges
Is this position available for non canadian residents?
[email protected]
Attachments:
curriculo raul lopez ingles.doc 370 KB
Maybe you are looking for
-
I Messed Up Safari But Can't Seem to Re-Download It
I used Target Disk Mode to copy Applications from my desktop to my MacBook, which worked fine for the most part, but now Safari is really messed up. Doesn't really open; crashes immediately after a link is clicked in an e-mail. I've tried to re-downl
-
I like to fluently blend in more images , When i use the gradient tool and hold down the shift key to draw a line , i see no fluent transition of the two images, instead part of image fades into a tranpanrant ' check board' layer instead. What goes w
-
Clearing property upon restart
This pertains to an AppleScript application -- not an AppleScript Studio app. The script generates information which must persist through relaunches but which becomes totally obsolete if the computer is shut down. Stored as a property, the informatio
-
Screen Black Out with Premiere Pro CS5
The way it happened for me is that I was editing 720p 60fps video on a 720p 24fps project. I've done this on After Effects with no problem whatsoever. I imported a folder with 24p and 60p footage to this 24p Project and as I was setting in and out po
-
I lost utilities icon on both my iPad and my wife's iPad mini is there a way to recover them.
How do I recover lost utilities icon.