Labwiew 8 won't start without internet connection

I have Labview 8.0 installed on a NI PXI-1050 chasis with Windows XP and Service Pack 2 installed. The problem is that Labview will not load up (it locks up at finishing initialization) if I do not have the chasis connected to the internet via ethernet connection. When I connect to the internet and reboot the computer, Labview is able to start fine. The chasis is installed in a mobile vechicle and cannot always be connected to the internet. I've read that Labview 8 needs to connect to the internet to make sure the copy it is running is legitimate? Is this copy protection messing me up? Is there a way to run Labview 8 without internet connection?
Thanks.

biqbal wrote:
I've read that Labview 8 needs to connect to the internet to make sure the copy it is running is legitimate?
Where did you read this? There's an initial activation that you do when you first install LabVIEW. but there's no "phone home" each time you launch LabVIEW. I can start up LabVIEW without an internet connection.
More than likely what's causing it are services that run and/or MAX. Software firewalls installed on a computer can block this communication even it's happening on a loopback, but you said that the problem goes away once you connect to the internet, so it's likely not a firewall issue. Is the PXI chassis normally connected directly to the internet through a modem, or is it connected to a router (when it's connected)? Are you using a static IP address on your PXI chassis?

Similar Messages

HT1386 I bought music off itunes and synced it to my iphone but they won't play without internet connection?!

I have bought an album off itunes and having trouble syncing to my iphone 3gs. First of all, all songs from the album were synced twice and would some would not play. I finally managed to remove the duplicates and now most of the songs on the album will not play without 3g internet connection! Any help on how to fix this would be greatly appreciated!

Do you have enough free space on the phone to download them?

Sqldeveloper do no start without internet connection!

Hi,
My pc is connected to internet . Whenever I start sqldeveloper it try to go
10.0.0.50:DNS . If my internet is down, it do not load . What is the problem ?
If there is internet connection there is no problem !
Win XP,Oracle 10gr1,
sqldeveloper 1.1.0.22 ,java platform 1.5.0_05,oracle IDE 1.1.0
What to do ?

Ok. It is solved now. simple solution ...someone may need it
Go to
E:\oracle\product\10.1.0\Db_2\NETWORK\ADMIN\tnsnames.ora
open that file,change host=127.0.0.1 ( /!\ ip address depands on PC)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
In my pc it was localhost.For some reasone it do not resolve to 127.0.0.1

ITunes won't start without internet

Hi
is this a bug or a feature ? I cannot start iTunes while I am not connected to the internet. I get the beachball and iTunes is not responding. As soon as I activate the internet connection iTunes starts up immediately. Is this the way it is supposed to be or did I screw something up ?
What if I am offline and want to listen to some music ?
Thanks for your help !

No, Genius is turned off. When I log in as a different user ( on my macbook), iTunes works fine. I suppose something is wrong with my preferences. I also noted problems when syncing/backing up my iPhone. Not sure if it is related though.

How do i start enterprise manager without internet connection

Hi friends,
I am facing a problem with my oracle 10g enterprise manager. It is working properly with 64 bit windows 7 os with internet connection. without internet connection i cant start start the enterprise manager how can i resolve the issue and start the enterprise manager without internet/
Thanks in advance:
regards
sree
Edited by: sreeprasad on Oct 16, 2012 2:44 AM

# AutoGenerated by Microsoft (R) Malware Protection Engine.
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# 127.0.0.1 localhost
# ::1 localhost
My host file shows like dis.
What changes i do with this? and where i type the command emctl status dbconsole?

HT4095 Can I watch rented movies in my ipad 2 without internet connection. I will be travelling by air and highway. Ty

Can I watch rented movies in my ipad 2 without internet connection?

If you use iTunes to rent movies, then yes.
iTunes movies downloaded and stored directly to your iPad and if you don't start playing a movie, stay on your iPad for 30 days.
If you start to play a downloaded, rented movie on your iPad, then it will expire in 24 hours.
Other services, like Amazon, Netflix and Hulu need an Internet connection to stream their content.

Captivate 8 video feature without internet connection

Hello everyone,
I have a few questions in regards to the video hosting features. My team and I are currently looking to purchase a software to help us get started with our new product which will focus on delivering e-learning content to mobile devices in remote areas.
We are currently faced with the problem of how to package our video content in our applications. Please correct me if I am wrong but from our understandings Captivate 8, works by streaming and progressively downloading video context while the app is in use. This is a problem for us because most of our clients will not have access to internet.
Am I missing some important information as to how this work, is there some way to upload the application with the videos already package as part of the application file? Therefore making the use of the internet will be obsolete
Thanks in advance for you help.

So the entire project can be download to a mobile device and used without internet connections?
Is there anyway to also capture responses from users even without an internet connection? That could be push back to servers when clients are able to get access to the internet.
Sorry, for all the questions. We are just trying to make sure we have the right software for our project.

Can I install Arch Linux without Internet connection ?

It sounds noobish but my friends like to know if they can install Arch Linux without Internet connection ?

mcmillan wrote:
The core iso should be all you need, just boot off that to start the installation. It's been a while since I did an install, but somewhere along the way it gives you an option to install off the cd or do a net install. You just need to choose the cd installation.
That being said, all you'll have without internet will be what's on the cd, so you'll be left with a pretty minimal install. If you want to update and install additional software then you'll either need to get the computer temporarily connected, or download the packages on a different computer and transfer them.
I am looking to do something similar. I have the core system installed on an older laptop, but I cannot get the wireless working (it has no ethernet). I've tried downloading the libgl packagesfrom a mirror to a thumbdrive, but it's a dependency nightmare. Is there a better way to do this?

Install 2nd instance of Arch Linux without internet connection

I have successfully install a first instance of Arch Linux using Arch Linux ISO + pacstrap + pacman with internet connection.
I have updated to latest package database list (/var/lib/pacman/sync) and package cache files (/var/cache/pacman/pkg) in first instance of Arch Linux with "pacman -Swyu".
Next, I would like to install 2nd instance of Arch Linux without using internet connection.
I share the "/var/lib/pacman/sync" and "/var/cache/pacman/pkg" via NFS from first Arch Linux instance.
I boot the 2nd instance with Arch Linux ISO and attempt to install without internet connection. I mount the two NFS shares from 1st instance to "/var/cache/pacman/pkg" and "/mnt/var/lib/pacman/sync" respectively. I execute
# pacstrap -i -c /mnt"
to start installation.
I found it is almost impossible with current implementation of pacstrap script. The pacstrap script always attempt to update package database list with -Sy option.
I think some amendments on pacstrap script is needed to install Arch Linux without internet connection.

I made the edit by adding the option -o to do what you want.
I am too lazy for a feature request right now...
#!/bin/bash
# Assumptions:
# 1) User has partitioned, formatted, and mounted partitions on /mnt
# 2) Network is functional
# 3) Arguments passed to the script are valid pacman targets
# 4) A valid mirror appears in /etc/pacman.d/mirrorlist
shopt -s extglob
out() { printf "$1 $2\n" "${@:3}"; }
error() { out "==> ERROR:" "$@"; } >&2
msg() { out "==>" "$@"; }
msg2() { out " ->" "$@";}
die() { error "$@"; exit 1; }
in_array() {
local i
for i in "${@:2}"; do
[[ $1 = "$i" ]] && return
done
track_mount() {
mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
api_fs_mount() {
CHROOT_ACTIVE_MOUNTS=()
{ mountpoint -q "$1" || track_mount "$1" "$1" --bind; } &&
track_mount proc "$1/proc" -t proc -o nosuid,noexec,nodev &&
track_mount sys "$1/sys" -t sysfs -o nosuid,noexec,nodev &&
track_mount udev "$1/dev" -t devtmpfs -o mode=0755,nosuid &&
track_mount devpts "$1/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
track_mount shm "$1/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
track_mount run "$1/run" -t tmpfs -o nosuid,nodev,mode=0755 &&
track_mount tmp "$1/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
api_fs_umount() {
umount "${CHROOT_ACTIVE_MOUNTS[@]}"
valid_number_of_base() {
local base=$1 len=${#2} i=
for (( i = 0; i < len; i++ )); do
(( (${2:i:1} & ~(base - 1)) == 0 )) || return
done
mangle() {
local i= chr= out=
unset {a..f} {A..F}
for (( i = 0; i < ${#1}; i++ )); do
chr=${1:i:1}
case $chr in
[[:space:]\\])
printf -v chr '%03o' "'$chr"
out+=\\
# fallthrough
out+=$chr
esac
done
printf '%s' "$out"
unmangle() {
local i= chr= out= len=$(( ${#1} - 4 ))
unset {a..f} {A..F}
for (( i = 0; i < len; i++ )); do
chr=${1:i:1}
case $chr in
if valid_number_of_base 8 "${1:i+1:3}" ||
valid_number_of_base 16 "${1:i+1:3}"; then
printf -v chr '%b' "${1:i:4}"
(( i += 3 ))
fi
# fallthrough
out+=$chr
esac
done
printf '%s' "$out${1:i}"
dm_name_for_devnode() {
read dm_name <"/sys/class/block/${1#/dev/}/dm/name"
if [[ $dm_name ]]; then
printf '/dev/mapper/%s' "$dm_name"
else
# don't leave the caller hanging, just print the original name
# along with the failure.
print '%s' "$1"
error 'Failed to resolve device mapper name for: %s' "$1"
fi
fstype_is_pseudofs() {
# list taken from util-linux source: libmount/src/utils.c
local -A pseudofs_types=([anon_inodefs]=1
[autofs]=1
[bdev]=1
[binfmt_misc]=1
[cgroup]=1
[configfs]=1
[cpuset]=1
[debugfs]=1
[devfs]=1
[devpts]=1
[devtmpfs]=1
[dlmfs]=1
[fuse.gvfs-fuse-daemon]=1
[fusectl]=1
[hugetlbfs]=1
[mqueue]=1
[nfsd]=1
[none]=1
[pipefs]=1
[proc]=1
[pstore]=1
[ramfs]=1
[rootfs]=1
[rpc_pipefs]=1
[securityfs]=1
[sockfs]=1
[spufs]=1
[sysfs]=1
[tmpfs]=1)
(( pseudofs_types["$1"] ))
newroot=/mnt
hostcache=0
copykeyring=1
copymirrorlist=1
offline=0
usage() {
cat <<EOF
usage: ${0##*/} [options] root [packages...]
Options:
-C config Use an alternate config file for pacman
-c Use the package cache on the host, rather than the target
-d Allow installation to a non-mountpoint directory
-G Avoid copying the host's pacman keyring to the target
-i Avoid auto-confirmation of package selections
-M Avoid copying the host's mirrorlist to the target
-o Do not update the pacman cache for offline installation
-h Print this help message
pacstrap installs packages to the specified new root directory. If no packages
are given, pacstrap defaults to the "base" group.
EOF
if [[ -z $1 || $1 = @(-h|--help) ]]; then
usage
exit $(( $# ? 0 : 1 ))
fi
(( EUID == 0 )) || die 'This script must be run with root privileges'
while getopts ':C:cdGiMo' flag; do
case $flag in
C)
pacman_config=$OPTARG
d)
directory=1
c)
hostcache=1
i)
interactive=1
G)
copykeyring=0
M)
copymirrorlist=0
o)
offline=1
die '%s: option requires an argument -- '\''%s'\' "${0##*/}" "$OPTARG"
die '%s: invalid option -- '\''%s'\' "${0##*/}" "$OPTARG"
esac
done
shift $(( OPTIND - 1 ))
(( $# )) || die "No root directory specified"
newroot=$1; shift
pacman_args=("${@:-base}")
if (( ! hostcache )); then
pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
fi
if (( ! interactive )); then
pacman_args+=(--noconfirm)
fi
if (( ! offline )); then
pacman_args+=(-y)
fi
if [[ $pacman_config ]]; then
pacman_args+=(--config="$pacman_config")
fi
[[ -d $newroot ]] || die "%s is not a directory" "$newroot"
if ! mountpoint -q "$newroot" && (( ! directory )); then
die '%s is not a mountpoint!' "$newroot"
fi
# create obligatory directories
msg 'Creating install root at %s' "$newroot"
mkdir -m 0755 -p "$newroot"/var/{cache/pacman/pkg,lib/pacman,log} "$newroot"/{dev,run,etc}
mkdir -m 1777 -p "$newroot"/tmp
mkdir -m 0555 -p "$newroot"/{sys,proc}
# always call umount on quit after this point
trap 'api_fs_umount "$newroot" 2>/dev/null' EXIT
# mount API filesystems
api_fs_mount "$newroot" || die "failed to setup API filesystems in new root"
msg 'Installing packages to %s' "$newroot"
if ! pacman -r "$newroot" -S "${pacman_args[@]}"; then
die 'Failed to install packages to new root'
fi
if (( copykeyring )); then
# if there's a keyring on the host, copy it into the new root, unless it exists already
if [[ -d /etc/pacman.d/gnupg && ! -d $newroot/etc/pacman.d/gnupg ]]; then
cp -a /etc/pacman.d/gnupg "$newroot/etc/pacman.d/"
fi
fi
if (( copymirrorlist )); then
# install the host's mirrorlist onto the new root
cp -a /etc/pacman.d/mirrorlist "$newroot/etc/pacman.d/"
fi
# vim: et ts=2 sw=2 ft=sh:

If I download Mountain Lion on my MBP , can I use the same installer file on a different computer and continue the installation without Internet connectivity?

Hi Folks,
I have just downloaded Mountain lion on my Macbook Pro(haven't installed it yet) . My question is, can I copy the same downloaded Mountain Lion from the Applications on to an external hard drive and use the same on a different computer? I am having problems with internet connectivity right now, it would be amazing if it can be installed on the iMac without internet connection.
So is that doable?
Thanks in advance

And the 2nd installation would not require internet connectivity? Except , of course during the set up and the configuration of iCloud and location based services, which I can skip at the time

I am unable to open my html files saved from mozilla firefox without internet connection...........each time it shows the error message as follows:-

I have saved some internet pages from mozilla firefox as html pages in F:/ drive....i am using windows7...whenever i open these files without internet connection....then it opens only for a short time and suddenly crashes by displaying the message like that:-
File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.ja!/chrome/browser/content/browser/undefinedgoogleads.g.doubleclick.netpagead/ads?client=ca-pub-7133395778201029&format=468x60_as&output=html&h=60&w=468&lmt=1346242109&ad_type=image&flash=11.3.300&url=file:///F:/UJJWAL/C%20TUTORIAL/c_arrays.htm&dt=1346323041583&bpp=19&shv=r20120815&jsv=r20110914&correlator=1346323042092&frm=20&adk=4203423324&ga_vid=377128990.1346323043&ga_sid=1346323043&ga_hid=232002736&ga_fc=0&u_tz=330&u_his=1&u_java=0&u_h=768&u_w=1366&u_ah=728&u_aw=1366&u_cd=24&u_nplug=11&u_nmime=30&dff=helvetica&dfs=12&adx=457&ady=211&biw=1349&bih=664&oid=3&fu=0&ifi=1&dtd=952&xpc=R193iApDeg&p=file://.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
can anyone fix my problem please?

What extensions do you have installed? To get a full list, do the following:
In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy all to clipboard''. Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Using the Troubleshooting Information page]].
Thanks in advance for your help!

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

Failing to install Domain Services on a Windows 2012R2 without internet connection

Hello
i have a windows 2012r2 server without internet connection.
when i try to add the Domain Services role it failed in the Feature installation phase
i even tried to provide an alternate location from a ISO source but that didn't help either
im lost here what should i do?
i attached the fail screenshot
Thanks
Guy

What error is shown in Event Viewer when the install fails?
Is it the first 2012 R2 DC in a lower level domain?
Try installing ADDS via PowerShell:
Import-Module ServerManager
Install-windowsfeature -name AD-Domain-Services –IncludeManagementTools
The other thing that it could be is an issue with the WID (Windows Internal Database)
Check in the Event Viewer for anything to do with Service: MSSQL$MICROSOFT##WID and perhaps try this:
Adjust your domain (or domain controller if appropriate) security policy to allow “NT SERVICE\MSSQL$MICROSOFT##WID” to log on as a service, a GPO setting that can be found under Computer Configuration > Policies > Windows Settings > Security Settings
> Local Policies > User Rights Assignment.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

IMac won't start without install disc

Hi, I'm new to all of this. I tried resetting my admin password using install disc on my iMac as I'd forgotten it. Now iMac won't start without disc. If disc is ejected on restart apple logo flashes between no entry sign and folder with "?" on it. Will start up with install disc in, but then wants me to choose language and install OS. Tried repairing and verifying HD and all seems ok. Tried holding option key and selecting HD on startup, but same outcome - choose language and install OS. How do I get back to normal desk top? Do I have to install OS again? Will I lose data? Please, please help! Thanks.

It should only take a minute or so at most to boot from the DVD.
If your sure you have the correct Install Disk for that iMac, I'd start over. Then if it still doesn't work then perhaps a trip to your Local Apple Service Provider with the Disk or Disk and iMac is in order.
http://www.apple.com/buy/locator/service/
Alternately using the correct Disk as per the following article, see if you can run the Apple Hardware Test? > http://support.apple.com/kb/HT1509

Installing Arch on PC without Internet Connection/Slow Connection

Arch Linux requires a fairly good internet connection to set up. How can one install it on machines which don't have any internet connectivity? Is there any way to make a DVD of Arch on a computer connected to internet and having Arch setup(DE,Media Players,Codecs etc) which can then be used on machines without internet connections This would come useful for me to install at my friends place. Does anyone even has a remote solution on this?

https://wiki.archlinux.org/index.php/Of … f_Packages
https://wiki.archlinux.org/index.php/Lo … ory_HOW-TO
and, of course:
https://wiki.archlinux.org/index.php/Beginners%27_Guide
You could also install on a computer with a connection, then use something like Clonezilla to deploy it.

Labwiew 8 won't start without internet connection

Similar Messages

Maybe you are looking for